}

Tender For System Augmentation & Modernization Of Electrical Infrastructure On Turnkey Basis Under Rdss In Varanasi District, varanasi-Uttar Pradesh

Purvanchal Vidyut Vitaran Nigam Limited has published Tender For System Augmentation & Modernization Of Electrical Infrastructure On Turnkey Basis Under Rdss In Varanasi District. Submission Date for this Tender is 25-04-2024. Electrical Maintenance Tenders in varanasi Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

43085448
Corrigendum : Tender For System Augmentation & Modernization Of Electrical Infrastructure On Turnkey Basis Under Rdss In Varanasi District
Open Tender
Indian
Uttar Pradesh
varanasi
25-04-2024

Tender Documents

Additional Details Available on Click
✓ Tendering Authority
✓ Publication Document
(Tender Document / Tender Notice )

Tender Details

Tender For System Augmentation & Modernization Of Electrical Infrastructure On Turnkey Basis Under Rdss In Varanasi District

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 12-Apr-2024 Time Extension Date 25-04-2024

Key Value

Document Fees
INR 29500 /-
EMD
INR 50000000.0 /-
Tender Value
INR 485.26 Crore /-

Attachment

FileName File Description File Size
70fab8bb-316c-4dd0-af91-125bcb8d0f6a.html Tender Notice 0 KB
Addition_TS_Saubhagya.pdf Tender Document 0 KB
BOQ_1590929.xls Tender Document 0 KB
SBD.rar Tender Document 0 KB
Tendernotice_1.pdf Tender Document 0 KB

BOQ Items

Name of Work: System Augmentation & Modernization of Electrical Infrastructure on turnkey basis under RDSS in varanasi District
Sl. No. Item Description
1Supply for New 33/11 KV Substation- SCADA Compatible asper technical specifications, scope of works and approved drawings
233/11 kV, 3 ph, 50 Hz, ONAN,Cu Wound, Outdoor Conventional type PowerTransformer with off load tap charger ( completely field with oil) as per TS
35 MVA Power Transformer
410 MVA Power Transformer
5100 KVA, 11/0.415 kV, 3 ph, 50 Hz, ONAN,Aluminiumwound,(three star rated) CRGO core, outdoor typeStation Transformer Completely filled with transformer oil asper technical specifications.
6MS Galvanised structures (all Type) made of joist / channel / angle / flat of different sections as per approved drawings. All structural steel members shall be galvanized after fabrication as per IS:4759 for all structural members. 3.5mm spring washers are to be used under each structural steel shall conform to IS 2026. All weld shall be 6mm filled weld unless specified otherwise.Anchor plat shall be of relevant IS
7GI bolts & nuts, washers etc. (all Type) should be as per approved drawings & TS. All bolts & nuts, washers etc. shall be galvanizedas per IS:4759. 3.5mm spring washers are to be used under each nut shall conform to IS 2026.All nuts and bolts shall be of property class 5.6 of IS 1367. Plain washers shall be as per IS 2016 & spring washers shall be IS: 3063 and foundation bolts, shall be of relevant IS
836kV, 1250A,25kA for 3 seconds, 3-ph, Outdoor typeVacuum Circuit breaker with marshalling box etc Complete in all respect along with support structure.
936kV, 1-Phase, 25kA/3 seconds,800-400-200/1-1-1 Amps ( having 3 secondery, core), 1 set = 3 Nos outdoortype Current Transformers along with junction box (1 no junction box for 3 no of 1-phase CTs), as required as per technical specifications complete in all respect.
1036kV, indoor, Control & Relay panel alongwith E/F & O/C,Mimic Diagram,Voltmeter, Ammeter, Annunciation Windows with annunciation relays and other components etc. complete as per approved drawings & TS:
1133 kV feeder Panel (without diffirential relays) withDLMS(modem compactible ) Trivector Static Energy Meter complete
1233 kV Transformer Panel (withdiffirential relay and 5/1 A auxillary CT)withDLMS(modem compactible ) Trivector Static Energy Meter complete
1336kV, 800A, 25kA , 3-ph double break center rotating type (DBCR), Gang Operated,isolator alongwith Support Insulators, OperatingMechanism, Base Channel down Pipe and all required accessories complete as per Technical Specifications. (with Earth Switch)
1436kV, 800A, 25kA , 3-ph double break center rotating type (DBCR), Gang Operated,isolator alongwith Support Insulators, OperatingMechanism, Base Channel down Pipe and all required accessories complete as per technical specifications. (Without Earth Switch)
1530 kV, 10kA, 1-ph Station Class Lightening Arrester complete(1 set= 3 Nos.)
169kV, 10kA, 1-ph Station Class LighteningArrester complete (1 Set = 3 Nos.)
1712 kV, 1250 A, 25kAfor 3 seconds, 3-ph, indoor typeVacuum Circuit BreakerforIncomer along with 12 kV, 1-Phase, 25kA, 600-300/5-5 A, 3 Nos indoor type Current Transformer 3 Core, Potential Transformer 11KV/110 V, indoor mounting type control panel for incoming breaker and required accessories, A-meter, volt-meter, 3-phase , withDLMS(modem compactible ) Tri Vector energy meter, Numerical Relays & accessories complete as per specifications for transformer breaker protectionwith earth fault, overcurrent .
1812 kV, 1250 A, 25kAfor 3 seconds, 3-ph, indoor typeVacuum Circuit Breakerforalong with 12 kV, 1-Phase, 25kA, 600-300/5-5 A,3 Nos indoor type Current Transformer, control panel for Bus couplar and required accessories, A-meter, Numerical Relays & accessories complete as per specifications for Bus Coupler protectionwith earth fault, overcurrent .
1912 KV 3 Ph 1250 A, 25kAfor 3 seconds, 3-ph, indoor typeVacuum Circuitbreaker along with 12 kV, 1-Phase, 25kA, 400-200/5-5 A,3 Nos indoor type CurrentTransformer,indoor mounting type control panel for feeder protection and required accessories, A-meter, Numerical Relay & accessories complete as perspecifications for feeder breaker protection & Protection for Earth fault and over current) with extensible arrangement for future
2024V, 150 AHPb(Lead) Acid battery, battery standmade of teakwood duly painted with anti acid resistive paint, battery insulators, inter-battery wiring using 30 sqm, 1.1 kv, copper single coremulti strand cable, terminal connectors, Rubber mats & all other accessories and connectors as per technical specifications.
2124V, 150 AH.Float-cum-Boost Battery Charger with full wave rectification for230V,1 phase, 50 Hz AC Input Supply as per technical specifications.
2224V DCDB complete in all respect suitable for 20 nos.of DC circuit for smooth operation of DC supplyas per technical specifications.
23415V, ACDBalongwiththree phase-neutral voltmeter,three phase ammeter andSelector switches, 200 Amps TPNswitch fuse unit as incomer, 32 Amps TPN switches as outgoing feeders suited for number of control panels, nos of VCB kiosk panel, having20% spare outgoing feeders, mountingarrangements etc as pertechnical specifications.
24ACSR Panther Conductor for Bus-Bars & Jumpers/Droppers/Terminations
25Earthing & Grounding conductor as per Approved Electrical Layoutfor each sub- station with
2675 x 8 mm GI flat.
2750 x 6 mm GI flat.
2825 mm dia MS rod 6 m long for earth mat
2940 mm dia.,3000 mm long GI pipe earthelectrode as per Technical Specification
3033 KV and 11 KV Insulator - Pin, Post and Disc insulators along with G.I. Pin, Hardware & Accessories suitable for Panther conductors as per Technical secifications.
3133 KV Post Insulator (1 Set = 2 Nos of 22 KV)
3233 KV Disc InsulatorInsulator(1 Set = 4 Nos Disc Insulator 70 KN)
33Hardware fitting for 33 KV Disc Insulator (B&S Type 70 KN)
3433 KV Polymer Pin Insulator with Pin
35Bimetalic Clamps , Al. Connectors, Al. tape etc. complete in all respect as required.
36Station Lighting System (External) 120 Watt, LEDwith proper illuminationcomplete for switchyard,main gate and sub-station boundry including all associated materials such as insulated wires, cables, boards, switches and fixing arrangements etc. all complte as per applicable TS and approved drawing. (minimum 8 nos on Lighting Poles & 8 nos on structure & control room )
37Station Lighting System (internal) with proper illumination complete forcontrol room building, Incharge room, Battery room, Store room, Washroom, Guard room, portico etc.including all associated materials such as insulated wires, cables, boards, switches and fixing arrangements etc.and Celling, wall Fan & exhast fan (Total 8 nos.) all complte as per applicable TS and approved drawing.
38Tool & Plant: Gum Boot- 2 pair, Hand Gloves- 2 pair, Insulated Plier- 2 nos., D E spanner set- 2 sets, Slide range 8" & 12" 2 nos each, Torch (Flash Light) 4 cell- 2 nos, Earth megger- 1 no, Insulation Megger (hand operated) 1000 V-1 no, Tong Tester (Digital)- 1 no, Discharge Rod (1 Set=3 Nos)- 6 Sets, Rubber mat (1.25" Thick) for laying in front of all panels in control room completely
39Fire Fighting Equipment comprises of Dry Chemical Powder Type(6 Kg) for controlroom, CO 2 Type of 4.5Kg Capacity for Control Room, CO2 type Trolly mounted of 22.5 KG Capacity for Switch Yard, four nos.of fire buckets set including their stand as per technical specifications, scope of works and approved drawings
40All types control cable and LT power cable required with all accessories complete for the commissioning of sub-station as per TS
41LT power cable 3.5C x 95 sq. mm.
42LT control cable 4X2.5 sqmm size Complete in all respect as per site requirement complete with lugs etc.
43LT control cable 2X2.5 sqmm size Complete in all respect as per site requirement complete with lugs etc.
4411 kV, 3-ph, 200 A, 3 Pin type, Vertical Mounting type, Gang Operated,TPMO Switch along with Support Insulators, Base Channel, down Pipe, Arcing Horns etc. complete asper technical specifications, scope of works and approved drawings
4536 kV, 1-Phase, 33kV/110 volt, Single coreoutdoor type Potential Transformer including accessories etc., complete as per technical specifications.( 1 set=3 no)
46Design, engineering and supply of Fully automatic Capacitor bank with automatic control panel, isolator,indoor type suitable Vacuum Circuit Breaker, mounting structures, All types of cable (11 KV grade 185 sqmm, XLPE & control cable etc.) & its accessoriescomplete , earthing etc as required as per technical specifications, approved drawings, scope of the works of following capacities:
471980 KVAR
483960 KVAR
4911 KV, XLPE, Power cable, aluminiumconductor, stranded
503Cx 400 sqmm (armoured)
513Cx 185 sqmm (armoured)
523Cx35 Sqmm (Un -armoured)
53Cable termination kit suitable for termination in transformer cable box/breaker panel/ outdoor 11 KV terminals complete with all accessories etc. (1 Set= 1 Indoor+1 Outdoor)
543Cx 400 sqmm
553Cx 185 sqmm
563Cx35 Sqmm
5711 KV TPMO as per technical specifications
58Supply of 8.5 meter long /180 KG PCC Poles (PCC Pole as per state practice)
59Supply of Pole accessories as per technical specification, approved drawing and scope of work
60Supply of 11 KV danger board
61Stone Pad(300x300x75mm)
62Supply of GI Barbed wire 12 SWG
63Supply of GI Earthing spike made of 20x2500mmsolid Rod
64Supply of 8 SWG GI wire
65Furniture items as required
66Office table Godrej make
67Office chair Godrej make
68Godrej Storwel (Almirah) standard size.
69Supply for New 33/11 KV Indoor GIS Type Substation- SCADA Compatible asper technical specifications, scope of works and approved drawings
70Supply of 10 MVA 33/11 kV Transformer with all complete assesories as per TS
71Supply of 33 KV GIS Panels with 2 line bays, 2 transformer bays, one bus coupler bay, Bus PT, all complete with numerical relays, facility for data transmission and remote control this includes PT raiser panel etc. if required.
72Supply of 11 KV GIS Panels with 6 line bays, 2 transformer bays, 1 station transformer bay & one bus coupler bay, Bus PT, all complete with numerical relays, facility for data transmission and remote control this includes PT raiser panel etc. if required. PT required for each of the bus section.
73Supply of 24 V, 150AH, Ni-Cd sealed type battery set and all other accessories complete.
74Supply of Float-cum-boost battery charger (SMPS based ) with full wave , full control rectification, 50Hz input voltage for charging 24V, 150 AH Battery alongwith DCDB, connectors etc. complete and connection with 24 V , 80AH Battery set and single phase AC input supply.
75Supply of 415V AC Distribution Board/Panel of sheet stealenclosed cubical floor mounting type for catering auxiliary power supply of the substaion etc. complete
76Supply of 100KVA, 11 kV/0.415 kv Station Transformer alongwith allaccessories as per TS.
77Supply of40mm dia 3000mm long GI Pipe (Medium Grade) earth electrodes & other accessories for treated earth erection is including of Excavation and other associated activities as per TS.
78Supply of 60x8 mm Galvanized flat for raiser for earthing as per TS
79Suplly of 30 KV, 1 Phase, 10KA LA with all accessories as per TS.
80Suplly of 9 KV, 1 Phase, 10KA LA with all accessories as per TS.
81Supllyof 3Cx300 sqmm. 33 KV cable (Panel to Transformer- 1 Run) with cable tray.
82Supllyof 3Cx400 sqmm. 11 KV cable (Panel to Transformer- 2 Run) with cable tray.
83Supllyof Control Cable of 2 core 2.5 sq. mm copper cable with cable tray and associated items
84Supllyof Control Cable of 4 core 2.5 sq. mm copper cable with cable tray associated items
85Supllyof Control Cable of 10 core 2.5 sq. mm copper cable with cable tray associated items
86Supply of sand bucket stand with 4 Nos. buckets.
87Supply of CO2 cylinder 4 nos of 4.5 kgs supply and fixing of CO2 type fire extinguishers capacity confirming to IS 2878 made ISI mark (1 set)
88Supply of ISI make ABC Power MAP 2 kg Fire extinguisher Mono ammonium phosphate power 50, stored pressure type, complete with pressure guage and all accessories applicable on class A,B,C electrically started fier as per building SSR.
89Supply of Synthetic Rubber mats as per IS 15652 in control room 2.5 mm thik
90Supplyof 33 kV Silicon coated touchproof Indoor termination joint (Al) kit for XLPE 3 C X 300 sqmm
91Supplyof 11 kV Silicon coated touchproof Indoor termination joint (Al) kit for XLPE 3 C X 400 sqmm(Incoming)
92Supplyof 11KV XLPE Cable (3x400 Sq.mm.)outdoor Heat Shrinkable Termination kit boxes mounted with transformer.
93Supplyof 11 kV Silicon coated touchproof Indoor termination joint (Al) kit for XLPE 3 C X 185 sqmm
94Suplly of Complete lighting system for control room building,main gate and substation boundary including fans as per detailed Technical Specifications.
95Supply for Augmentation/ Additional Power Transformers SCADA Compatible asper technical specifications, scope of works and approved drawings
9633/11 kV, 3 ph, 50 Hz, ONAN,Cu Wound, Outdoor Conventional type PowerTransformer with off load tap charger ( completely field with oil) as per TS
9710 MVA Power Transformer
985 MVA Power Transformer
99MS Galvanised structures (all Type) made of joist / channel / angle / flat of different sections as per approved drawings. All structural steel members shall be galvanized after fabrication as per IS:4759 for all structural members. 3.5mm spring washers are to be used under each structural steel shall conform to IS 2026. All weld shall be 6mm filled weld unless specified otherwise.Anchor plat shall be of relevant IS
100GI bolts & nuts, washers etc. (all Type) should be as per approved drawings & TS. All bolts & nuts, washers etc. shall be galvanizedas per IS:4759. 3.5mm spring washers are to be used under each nut shall conform to IS 2026.All nuts and bolts shall be of property class 5.6 of IS 1367. Plain washers shall be as per IS 2016 & spring washers shall be IS: 3063 and foundation bolts, shall be of relevant IS
10136kV, 1250A,25kA for 3 seconds, 3-ph, Outdoor typeVacuum Circuit breaker with marshalling box etc Complete in all respect along with support structure.
10236kV, 1-Phase, 25kA/3 seconds,400-200/1-1 Amps ( having 3 secondery, core), 1 set = 3 Nos outdoortype Current Transformers along with junction box (1 no junction box for 3 no of 1-phase CTs), as required as per technical specifications.
103SCADA Compatible, 36kV, Indoor, Control & Relay panel along with E/F & O/C relays, Mimic Diagram, Voltmeter, Ammeter,Static Tri-Vector Energy Meter (DLMS modem compactible), With Differential Relay, 5/1 A Auxillary CT, Annunciation Windows with annunciation relays and other components etc as per approved drawings, specifications and scope of works :
10436kV,800 A, 25kA, 3-ph double break center rotating type (DBCR), Gang Operated,(Without Earth Switch)isolator along with Support Insulators, Operating Mechanism, With auxillary contact box, Base Channel down Pipe and all required accessories complete as per technical specifications,
10512 kV, 1250 A, 25kAfor 3 seconds, 3-ph, indoor typeVacuum Circuit BreakerforIncomer along with 12 kV, 1-Phase, 25kA, 600-300/5-5 A, 3 Nos indoor type 3 core Current Transformer, Potential Transformer 11KV/110 V, indoor mounting type control panel for incoming breaker and required accessories, A-meter, volt-meter, 3-phase , withDLMS(modem compactible ) Tri Vector energy meter, Numerical Relays & accessories complete as per specifications for transformer breaker protectionwith earth fault, overcurrent .
10612 KV, 3 Ph 1250 A, 25kAfor 3 seconds, 3-ph, indoor typeVacuum Circuitbreaker along with 12 kV, 1-Phase, 25kA, 400-200/5-5 A,3 Nos indoor type CurrentTransformer,indoor mounting type control panel for feeder protection and required accessories, A-meter, Numerical Relay & accessories complete as perspecifications for feeder breaker protection & Protection for Earth fault and over current) with extensible arrangement for future
10712 kV, 1250 A, 25kAfor 3 seconds, 3-ph, indoor typeVacuum Circuit Breakerforalong with 12 kV, 1-Phase, 25kA, 600-300/5-5 A,3 Nos indoor type Current Transformer, control panel for Bus couplar and required accessories, A-meter, Numerical Relays & accessories complete as per specifications for Bus Coupler protectionwith earth fault, overcurrent .
10830 kV, 10kA, 1-ph Station Class Lightening Arrester complete(1 set= 3 Nos.)
1099kV, 10kA, 1-ph Station Class LighteningArrester complete (1 Set = 3 Nos.)
110ACSR Conductor for Bus-Bars & Jumpers/Droppers/Terminations including hardware fittings, hardware etc
111Panther conductor
112Earthing & Grounding conductor as per Approved Electrical Layoutfor each sub- station with
11375 x 8 mm GI flat.
11450 x 6 mm GI flat.
11525 mm dia MS rod 6 m long for earth mat
1161.1 KV Grade Control Cable 4x2.5 sq mm for commissioning of POWERtransformers with all associated Items complete
1171.1 KV Grade Control Cable 4x2.5 sq mm for commissioning of POWERtransformers with all associated Items complete
11811 kV, 3-ph, 200 A, 3 Pin type, Vertical Mounting type, Gang Operated,TPMO Switch along with Support Insulators, Base Channel, down Pipe, Arcing Horns etc. complete asper technical specifications, scope of works and approved drawings
11911 KV, XLPE, Power cable, aluminiumconductor, stranded
1203Cx 400 sqmm (armoured)
1213Cx 185 sqmm (armoured)
122Cable termination kit suitable for termination in transformer cable box/breaker panel/ outdoor 11 KV terminals complete with all accessories etc.(1 Set= 1 Indoor+1 Outdoor)
1233Cx 400 sqmm
1243Cx 185 sqmm
12533 and 11 KV Insulator - Pin, Post and Disc insulators along with Hardware & accessories suitable for Panther conductors as per Technical specifications.
12633 KV Post Insulator (1 Set = 2 Nos of 22 KV)
12733 KV Disc Insulator(1 Set = 4 Nos Disc Insulator 70 KN)
128Hardware fitting for 33 KV Disc Insulator(B & S Type)
129Bimetalic Clamps , Al. Connectors, Al. tape etc. complete in all respect as required.
130Supply of 8.5 meter long /180 KG PCC Poles (PCC Pole as per state practice)
131Supply of Pole accessories as per technical specification, approved drawing and scope of work
132Supply of 11 KV danger board
133Stone Pad(300x300x75mm)
134Supply of GI Barbed wire 12 SWG
135Supply of GI Earthing spike made of 20x2500mmsolid Rod
136Supply of 8 SWG GI wire
137Supply for New 33 KV Line asper technical specifications, scope of works and approved drawings
138Supply of 9 m PCC Poles - (PCC Pole as per state practice)
139Supply of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
140Supply of 13 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
141Supply New Pre-fabricated hot dip galvanized steel item, for augmentation of 33 KV line, like V cross arm, top channel, top clamp, cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp,MS angle (65x65x6mm), MS flats (65x8mm) anti climbing device clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
142Supply of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
143Supply of Pole accessories as per technical specification, approved drawing and scope of work
144Supply of 33 KV danger board
145Supply of GI Barbed wire 12 SWG
146Supply for New 3 phase 33 kV line with following type of new ACSR conductor including jointing sleeves, binding material, aluminum tape and helical Preformed fittings etc as required as per technical specification, approved drawings and scope of work.
147Supply of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog
148Supply of 33 KV Under ground cable as per technical specification, approved drawings and scope of work.
149Supply of 3CX300 Sqmm 33 KV XLPE Armored Cable
150Supply ofof Heat Shrinkable Terminal Jointing Kit Outdoor for 33 KV 3x300 sq. mm XLPE Cable
151Supply ofof Heat Shrinkable Jointing Straight Through Kitfor 33 KV 3x300 sq. mm XLPE Cable
152Supply of 160 mm dia. HDPE pipe.
153Supply of G.I. pipe 150mmwith clamp and nut & bolts
154Supplyof new Insulator and hardware for Augmentation of33 kV line as per technical specification, approved drawings and scope of work
155Supply of 33 KV 70 KN polymer Disc Insulator along with suitable hardware fittings
156Supply of 33 KV 10 KN Polymer Pin Insulators
157Supply of new Earthing arrangement for Augmentation of33 kV line as per technical specifications,approved drawings and scope of work.
1588 SWG GI Coil 115 turns (1.85 Kg)
159Supply of new Stay Set (Galvanized) for 33 kV line with 50x8 mm stay clamp, 2 nos. guy insulator, anchor plate (300x300x8mm) , nut bolts, 1 no. turn-buckles, 1.8 m long, 20 mm diameter solid GS stay rod & 7/4.00 mm dia GI strandedwire complete as per technical specification, approved drawings and scope of work.
160Supply of new GI wire for earthing and guarding for Augmentation of33 kV line as per technical specification, approved drawings and scope of work.
161Supply of 6 SWG GI wire
162Supply of 8 SWG GI wire
163Supply of Conductor accessories as per technical specification, approved drawing and scope of work
164Supply of PG Clamp for Dog to Dog conductor
16533 kV LINEFORUNDER GROUND RAILWAY CROSSING (300 Mtr) BY 2 Nos (INCLUDING ONE SPARE)3Cx300 Sqmm XLPE Armoured Cable USING 150MM DIA GI PIPES (grade A for underground laying and grade B for pole support), OUTDOOR HEAT SHRINKABLE CABLE JOINTING KITS,LUGS, 4 Nos GI 3-Meters LONG pipe, EARTHING, 8 SWG GI WIRES, CABLE MARKERS, BI METALLICK CLAMPS, JUMPERING , AS REQUIRED AS PER TECHNICAL SPECIFICATIONS, DRAWINGS AND SCOPE OF THE WORK.
16633 kV LINEFORUNDER GROUND Highway CROSSING (200 Mtr) BY 2 Nos (INCLUDING ONE SPARE)3Cx300 Sqmm XLPE Armoured Cable USING 150MM DIA GI PIPES (grade A for underground laying and grade B for pole support), OUTDOOR HEAT SHRINKABLE CABLE JOINTING KITS,LUGS, 4 Nos GI 3-Meters LONG pipe, EARTHING, 8 SWG GI WIRES, CABLE MARKERS, BI METALLICK CLAMPS, JUMPERING , AS REQUIRED AS PER TECHNICAL SPECIFICATIONS, DRAWINGS AND SCOPE OF THE WORK.
167Supply For new 11 KV line asper technical specifications, scope of works and approved drawings
168Supply of 8.5 meter long /180 KG PCC Poles (PCC Pole as per state practice)
169Supply of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
170Supply for Augmentation of 3 phase 11 kV line using new Pre-fabricated hot dip galvanized steel items like V cross arm, top channel, top clamp, Cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle, MS flats pole extension canal with welded plate, anti climbing device clamp, pole clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
171Supply of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
172Supply of Pole accessories as per technical specification, approved drawing and scope of work
173Supply of 11 KV danger board
174Stone Pad(300x300x75mm)
175Supply of GI Barbed wire 12 SWG
176Supply for Augmentation of 3 phase 11 kV line replacing existing conductor with following type of new ACSR conductor including jointing sleeves, binding material and helicon formed fittings etc as required as per technical specification, approved drawings and scope of work.
177Supply of 6/2.59 + 1/2.59 mm (30 mm² Al. Area) - Weasel
178Supply of 6/3.35 + 1/3.35 mm (50 mm² Al. Area) - Rabbit
179Supply of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog
180Insulated covered Conductor (50 Sqmm)
181Supply for New 3 phase 11 kV line using new Insulator and hardware as per technical specification, approved drawings and scope of work
182Supply of 11 KV 45 KN polymer Disc insulator along with suitable hardware fittings
183Supply of 11 KV 5 KN Polymer Pin Insulators with suitable hardware fittings
184Supply for New 3 phase 11 kV line using new Earthing arrangement as per technical specifications,approved drawings and scope of work.
185Supply of GI Earthing spike made of 20x2500mmsolid Rod
186Supply of Stay Set (Galvanized) with 50x8 mm stay clamp, 1 no. guy insulator, anchor plate (200x200x6mm) , nut bolts, 1no. turn-buckles, 1.8 m long 16 mm diameter solid GI stay rod & 7/3.15 mm dia GI strandedwire complete as per technical specification, approved drawings and scope of work.
187Supply for New of 3 phase 11 kV line using new GI wire for earthing and guarding as per technical specification, approved drawings and scope of work.
188Supply of 6 SWG GI wire
189Supply of 8 SWG GI wire
190Supply of Conductor accessories as per technical specification, approved drawing and scope of work
191Supply of PG Clamp for Weasel to Weasel conductor
192Supply of PG Clamp for Dog to Dog conductor
193Supply of PG Clamp for Rabbit to Rabbit conductor
194Supply of 11 Kv Line on 3x70 sqmm XLPE Cable
195cable Jointing kit for 11 kvLine 70 sqmm
196Supply of 11 KV Lineunderground Cableensuring statutory clearances as required as per technical specification, approved drawings and scope of work
197Supply of 3Cx185 Sqmm 11 KV XLPE Armored Cable
198Supply of Heat Shrinkable Jointing Kit Outdoor for 11 KV 3x185 sq. mm XLPE Cable
199Supply of Heat Shrinkable Jointing Kit Straight throughfor 11 KV 3x185 sq. mm XLPE Cable
200Supply of 110 mm dia. HDPE pipe .
201Supply of G.I. pipe 100 mm diawithclamps, Nut and Bolts.
202Supply of 11 KV Lineunderground railway crossing ensuring statutory clearances as required as per technical specification, approved drawings and scope of work
203Supply for 11 KV lineunder ground Railway crossing with 2 nos (Including one spare) 3Cx185 Sqmm XLPE Armored Cable (0.3 km each) using 150mm dia GI pipes (grade A for underground laying and grade B for pole support), Outdoor heat shrinkable cable jointing kit, 11 KV LIGHTENING ARRESTOR STATION CLASS 10KA (6 NOS.), LUGS, 4 Nos GI 3-Meters LONG pipe EARTHING, 6 SWG GI WIRES,CABLE MARKERS, BI METALLICK CLAMPS and JUMPERING etc AS REQUIRED AS PER TECHNICAL SPECIFICATIONS, DRAWINGS AND SCOPE OF THE WORK.
204Supply of 11 LV Line underground Highway crossing ensuring statutory clearancesas required as per technical specification, approved drawings and scope of work
205Supply of 11 KV LINEFORUNDER GROUND Highway CROSSING BY 2 Nos (INCLUDING ONE SPARE) 3Cx185 Sqmm XLPE Armored Cable (0.3 km each) USING 160 mm HDPE pipe at road crossing and 150MM DIA GI PIPES (gradeB for pole support), OUTDOOR HEAT SHRINKABLE CABLE JOINTING KITS, 11 KV LIGHTENING ARRESTOR STATION CLASS 10KA (6 NOS.), LUGS, 4 Nos GI 3-Meters LONG pipe EARTHING, 6 SWG GI WIRES, 7/20 GI wire, CABLE MARKERS, BI METALLICK CLAMPS and JUMPERING etc AS REQUIRED AS PER TECHNICAL SPECIFICATIONS, DRAWINGS AND SCOPE OF THE WORK.
206Supply of New Distribution Transformers asper technical specifications, scope of works and approved drawings
207Supply of 8.5m/180 kgs PCC Poles - (PCC Pole as per state practice)
208Supply of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
209Supply for distribution transformer mounting using new Pre-fabricated hot dip galvanized steel items like V cross arm, MS top channel, top clamp, Cross arm, Bracket, Clamps, cross bracings, bracings, strain plate, back clamp, MS angle, MS Channel, MS transformer base channel, MS flats pole extension channel with welded plate, anti climbing device clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
210Supply of hot dip galvanized MS Nuts, Bolts with Washersas per technical specification, approved drawings and scope of work.
211Supply of Pole accessories as per technical specification, approved drawing and scope of work
212Supply of 11 KV danger board
213Supply of Stone Pad 300X300X75
214Supply of Stay Set (Galvanized) with 50x8 mm stay clamp, stay guy insulator (1 Nos.), anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI strandedwire complete as per technical specification, approved drawings and scope of work.
215Supply of Insulator and hardware as per technical specification, approved drawings and scope of work.
216Supply of 11 KV45 KN polymer Disc insulator along with suitable hardware fittings
217Supply of 11 KV 5 KN Polymer pin insulator with Pin
2189 KV 5 KA Distribution Class Lightening Arrester for DT as per technical specification, approved drawings and scope of work.
21911 kV, 3-ph, 200 A, 3 Pin type, Vertical Mounting type, Gang Operated,TPMO Switch along with Support Insulators, Base Channel, down Pipe, Arcing Horns etc. complete asper technical specifications, scope of works and approved drawings
22011 kV, 200 Amp, 3-ph, Horn Gap fuse units (set of 3 units) along with Support Insulators, Base Channel, fuse barrel etc. complete asper technical specifications, scope of works and approved drawings
221Supply of Earthing arrangement as per technical specifications,approved drawings and scope of work.
222Supply of Spike Earthing 20mm X 2500 mm GI solidRod
223Supply of Chemicalrod earthing including electrode, chemical, with 3000mm long, 40 mm diameterGI pipe, GI Strip of 24x3mm.
224Supply of 6 SWG GI wire for earthing
225New Distribution Transformer with all accessories as per as per technical specification, approved drawings and scope of work.
22611/0.4 KV Distribution Transformer 25 KVA 3 phase DTR
22711/0.4 KV Distribution Transformer 63 KVA 3 phase DTR
22811/0.4 KV Distribution Transformer 100 KVA 3 phaseDTR
22911/0.4 KV Distribution Transformer 250 KVA 3 phaseDTR
230Outdoor mounting type Distribution box made of MS sheet of thickness not less than 18 SWG CRCA sheet by deep drawn method, dust and moisture vermin, weather proof with degree of protection with suitable bus bars, Modem Compatible DLMS Compliant LT Trivector Static Meter with suitable CTs, earthing bus, earthing terminals, box illumination, front door operated with proper locking arrangement, lugs, mounting channel frame, internal wiring with FRLS cables, danger plate, numbering, back clamps, hardware as per scope of the work, technical specifications and approved drawings, direction of Engineer in Charge suitable for following transformer:
2313 Ph 25 KVA transformer 40 A TPN MCCB (incomer) and 6 Nos. 25 A SP MCCB (outgoing)
2323 Ph 63 KVA Transformer having 200 A TPN isolator, 100 A HRC fuse (incomer) and 6 Nos. 60 A SP MCCB (outgoing)
2333 Ph 100 KVA Transformer having 200 A TPN isolator, 160A HRC fuse (incomer) and 6 Nos. 90 A SP MCCB (outgoing)
2343 Ph 250 KVA Transformer having 600 A TPN isolator, 315 A HRC fuse (incomer) and 9 Nos. 120 A SP MCCB (outgoing)
2351.1 KV XLPE Aluminium Conductor, Stranded, unarmoured cable for connection of transformer LV bushing to Distribution Box and Distribution box to overhead line as per Scope of work, technical specification and approved drawings:
2361CX35 sqmm aluminium conductor cable
2371Cx70 sqmm aluminium conductor cable
2381Cx150 sqmm aluminium conductor cable
2391Cx400 sqmm aluminium conductor cable
240ACSR Rabbit Conductor for jumpering including PG Clamps, bi-metallic connectors, hardware etc as per technical specifications, approved drawings and scope of works.
241Supply for Augmentation of existing Distribution transformer asper technical specifications, scope of works and approved drawings
24211/0.433 kV 25kVA Distribution Transformer
24311/0.433 kV 63kVA Distribution Transformer
24411/0.433 kV 100kVA Distribution Transformer
24511/0.433 kV 250kVA Distribution Transformer
24611/0.433 kV 400kVA Distribution Transformer
247LT XLPE Cable 4x16 Sqmm
248LT XLPE Cable 3.5x70 Sqmm
249LT XLPE Cable 3.5x150 Sqmm
250LT XLPE Cable 3.5x400 Sqmm
251LT XLPE Cable 1x240 Sqmm
252LT XLPE Cable 1x400 Sqmm
253Supply of Stay Set (Galvanized) with 50x8 mm stay clamp, 1 no. guy insulator, anchor plate (200x200x6mm) , nut bolts, 1no. turn-buckles, 1.8 m long 16 mm diameter solid GI stay rod & 7/3.15 mm dia GI strandedwire complete as per technical specification, approved drawings and scope of work.
254Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG earthing wire etc.
255Supply of Trolly Mounted DT- of 400KVA asper technical specifications, scope of works and approved drawings
25611/0.415 kV 400 KVA Distribution Transformer
257Fabricated Trolley With 4 Tyre wheels to house Transformer with all fixing Arrangement along with fencing and locking mechanism.
2583x50 mm² 11KV class XLPE Cable.
259Heat shrinkable Termination kits suitable for 3x50 mm²Xlpe Cable (out door) including bushing cap.
260400 Sq.mm., LT single core `XLPE insulatedun-armoured aluminium conductor cable
261Supply of Protection of DT asper technical specifications, scope of works and approved drawings
262Supply ofAB switch suitable for Distribution Transformer 100 KVA and above
263Supply of DO Fuse set suitable for Distribution Transformer 100 KVA and above
264Supply of LT ACB suitable for Distribution transformers having capacity 250 KVA and above
265Supply of LT Distribution box suitablefor Distribution Transformer upto 250 KVA
266Supply of LT Distribution box suitable for Distribution Transformer 400 KVA and above
267Supply of DT Cable asper technical specifications, scope of works and approved drawings
268LT XLPE Insulated Cable 1CX240 Sqmm
269LT XLPE Insulated Cable 1CX400 Sqmm
270LTXLPE Insulated Cable 1CX630 Sqmm
271Supply of New LT Line asper technical specifications, scope of works and approved drawings
272Supply of 8.5 m/180 kgs PCC Poles (PCC Pole as per state practice)
273Supply of 9 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
274Supply of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
275Galvanized Stay Set for LT line with anchor plate (200x200x6mm), 50x8mm stay clamp, 1 no. Stay guy insulator, nut bolts, 1 no. turn buckles, 1.8 m long, 16 mm diameter solid GS Stay rod & 7/3.15 mm Dia GI stranded wire etc as required as per technical specification, approved drawings and scope of work.
276New LT lines using new Earthing as per approved drawings, technical specifications and scope of work
277Supply of Spike Earthing made of 20mm X 2500 mm GI solid Rod
278Supply of 8 SWG GI wire for earthing and guarding
279Supply of following LT AB XLPE Cable for New AB XLPE Cable as required as per technical specification, approved drawings and scope of work:
280Supply of Aerial bunchedXLPE cable 1x16 sqmm+1x25 sqmm
281Supply of Aerial bunchedXLPE cable 3 X 50 sqmm+1x35 sqmm.(bare messenger wire)+1x16 sqmm.
282Supply of Aerial bunchedXLPE cable 3 X 95 sqmm.+1x70 sqmm.(Bare messenger wire)+1x16 sqmm.
283Supply of Aerial bunchedXLPE cable 3 X 120 sqmm. + 1x95 sqmm.(bare messenger wire) +1x16 sqmm.
284Supplyof Aerial bunchedXLPE cable 3 X 150 sqmm. + 1x120 sqmm.(bare messenger wire) +1x16 sqmm.
285Supply of Pole mounted LT Distribution box as per approved drawings, technical specifications and scope of work
286Supply of Three phase SMC Distribution box with clamps
287Supply of Single phase SMC Distribution box with clamps
288Supply of XLPE insulated Al. cable for energisation of distribution box/ Kiosk as per approved drawings, technical specifications and scope of work
289Suppply of 2Cx25 SQMM Stranded Unarmoured Cable (Al Conductor ) for chargingSingle Phase DB
290Suppply of 4Cx35SQMM Stranded Unarmoured Cable (Al Conductor ) for chargingThreePhase DB
291Supply of Stone pad (300x300x75)
292Supply of Accessories for AB XLPE Cable as per approved drawings, technical specifications and scope of work
293HDG LT Pole Clamp with nut & bolt for laying ABC
294Dead end Clamp with I-Hook( Insulated)
295Suspension Clamp with I-Hook ( Insulated)
296PG Clamps 16-120 sq mm to 16-120 Sqmm (For line to line jumpering of massenger wire & energizing DB Neutral)
297LT Insulation piercing connector 150-50 sqmm - 50-25 sqmm size (for energizing distribution box)
298LT Insulation piercing connector 150-50 sqmm - 150-50 sqmm size (for line to line jumpering)
299LT Insulation piercing connector 16 - 25sqmmsize suitable for street light connection
300Pre-Insulated Compression connectors size 16 sqmm suitable for AB XLPE cable
301Pre-Insulated Compression connectors size 50 sqmm suitable for AB XLPE cable
302Pre-Insulated Compression connectors size 95 sqmm suitable for AB XLPE cable
303Pre-Insulated Compression connectors size 120 sqmm suitable for AB XLPE cable
304Pre-Insulated Compression connectors size 150 sqmm suitable for AB XLPE cable
305Heat shrinkable type end cap for AB XLPE cable
306Supply of Extra Circuits AB XLPE cableasper technical specifications, scope of works and approved drawings
307Supply of 8.5 m/180 kgs PCC Poles (PCC Pole as per state practice)
308Supply of 9 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
309Supply of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
310Galvanized Stay Set for LT line with anchor plate (200x200x6mm), 50x8mm stay clamp, 1 no. Stay guy insulator, nut bolts, 1 no. turn buckles, 1.8 m long, 16 mm diameter solid GS Stay rod & 7/3.15 mm Dia GI stranded wire etc as required as per technical specification, approved drawings and scope of work.
311Extra Circuits for LT lines using new Earthing as per approved drawings, technical specifications and scope of work
312Supply of Spike Earthing made of 20mm X 2500 mm GI solid Rod
313Supply of 8 SWG GI wire for earthing and guarding
314Supply of following LT AB XLPE Cable for extra circuits as required as per technical specification, approved drawings and scope of work:
315Supply of Aerial bunchedXLPE cable 3 X 50 sqmm+1x35 sqmm.(bare messenger wire)+1x16 sqmm.
316Supply of Aerial bunchedXLPE cable 3 X 95 sqmm.+1x70 sqmm.(Bare messenger wire)+1x16 sqmm.
317Supply of Aerial bunchedXLPE cable 3 X 120 sqmm. + 1x95 sqmm.(bare messenger wire) +1x16 sqmm.
318Supplyof Aerial bunchedXLPE cable 3 X 150 sqmm. + 1x120 sqmm.(bare messenger wire) +1x16 sqmm.
319Supply of Pole mounted LT Distribution box as per approved drawings, technical specifications and scope of work
320Supply of Three phase SMC Distribution box with clamps
321Supply of XLPE insulated Al. cable for energisation of distribution box/ Kiosk as per approved drawings, technical specifications and scope of work
322Suppply of 4Cx35SQMM Stranded Unarmoured Cable (Al Conductor ) for chargingThreePhase DB
323Supply of Stone pad (300x300x75)
324Supply of Accessories for AB XLPE Cable as per approved drawings, technical specifications and scope of work
325Stainless steel Strap
326HDG LT Pole Clamp with nut & bolt for laying ABC
327Dead end Clamp with I-Hook( Insulated)
328Suspension Clamp with I-Hook ( Insulated)
329PG Clamps 16-120 sq mm to 16-120 Sqmm (For line to line jumpering of massenger wire & energizing DB Neutral)
330LT Insulation piercing connector 150-50 sqmm - 50-25 sqmm size (for energizing distribution box)
331LT Insulation piercing connector 150-50 sqmm - 150-50 sqmm size (for line to line jumpering)
332Pre-Insulated Compression connectors size 50 sqmm suitable for AB XLPE cable
333Pre-Insulated Compression connectors size 95 sqmm suitable for AB XLPE cable
334Pre-Insulated Compression connectors size 120 sqmm suitable for AB XLPE cable
335Pre-Insulated Compression connectors size 150 sqmm suitable for AB XLPE cable
336Heat shrinkable type end cap for AB XLPE cable
337Supply of Augmentation of LT AB Cable (Increasing Capacity) as per approved drawings, technical specifications and scope of work
338Supply of 8.5 m/180 kgs PCC Poles (PCC Pole as per state practice)
339Supply of 9 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
340Galvanized Stay Set for LT line with anchor plate (200x200x6mm), 50x8mm stay clamp, 1 no. Stay guy insulator, nut bolts, 1 no. turn buckles, 1.8 m long, 16 mm diameter solid GS Stay rod & 7/3.15 mm Dia GI stranded wire etc as required as per technical specification, approved drawings and scope of work.
341Conversion of existing LT lines using new Earthing as per approved drawings, technical specifications and scope of work
342Supply of Spike Earthing made of 20mm X 2500 mm GI solid Rod
343Supply of 8 SWG GI wire for earthing and guarding
344Supply of following LT AB XLPE Cable for Conversion of existing LT bare conductor line with AB XLPE Cable as required as per technical specification, approved drawings and scope of work:
345Erection of Aerial bunchedXLPE cable 3 X 95 sqmm.+1x70 sqmm.(Bare messenger wire)+1x16 sqmm.
346Erection of Aerial bunchedXLPE cable 3 X 120 sqmm. + 1x95 sqmm.(bare messenger wire) +1x16 sqmm.
347Supply of Pole mounted LT Distribution box as per approved drawings, technical specifications and scope of work
348Supply of Three phase SMC Distribution box with clamps
349Supply of XLPE insulated Al. cable for energisation of distribution box/ Kiosk as per approved drawings, technical specifications and scope of work
350Suppply of 4Cx35SQMM Stranded Unarmoured Cable (Al Conductor ) for chargingThreePhase DB
351Supply of Stone pad (300x300x75)
352Supply of Accessories for AB XLPE Cable as per approved drawings, technical specifications and scope of work
353Stainless steel Strap
354HDG LT Pole Clamp with nut & bolt for laying ABC
355Dead end Clamp with I-Hook( Insulated)
356Suspension Clamp with I-Hook ( Insulated)
357PG Clamps 16 Sq mm .- 120 sq mm (For line to line jumpering of massenger wire & energizing DB Neutral)
358LT Insulation piercing connector 120-50 sqmm - 50-35 sqmm size (for energizing distribution box)
359LT Insulation piercing connector 120-50 sqmm - 120-50 sqmm size (for line to line jumpering)
360Pre-Insulated Compression connectors size 95 sqmm suitable for AB XLPE cable
361Pre-Insulated Compression connectors size 120 sqmm suitable for AB XLPE cable
362Heat shrinkable type end cap for AB XLPE cable
363Supply of Feeder Bifurcation (33KV Line) as per approved drawings, technical specifications and scope of work
3649m/400 kgs PCC Poles (PCC pole as per state practice)
36513 m longSTP SP72
36611 m long steel tubular poles with welded steel base plate of designation 540 SP 55 (As per IS: 2713 , pt. I,II,III)
367Concreting of poles as per specification
368Stone Pad
369Supply New Pre-fabricated hot dip galvanized steel item, for augmentation of 33 KV line, like V cross arm, top channel, top clamp, cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp,MS angle (65x65x6mm), MS flats (65x8mm) anti climbing device clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
370Supply of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
371Danger Board with barbed wire including jumpher
372Number Plate
373Stay Set ( Galvanised) GI stay rod 20x1800 mm, stay wire 7/8 SWG GI wire, 50x8 mm stay clamp, stay insulator (2 nos.), anchor plate (300x300x8), nut bolts, 2 nos. turn buckles, 1.8 m long 20 mm dia. Solid GI Stay Rod, 7/4.0mm dia. GI stranded wire
374Insulator and hardware as per technical specification, approved drawings and scope of work
37533 KV polymer Disc insulator 70 KNB&S along with suitable hardware fittings
37633 KV polymer Pin insulators with GI Pin & nuts
377GI earthing Spike earthing 20x2500 mm solid rod & 6 SWG earthwire with nut and bolt
3786 SWGand 8 SWG GI wire, GI nuts, bolts & washers for guarding angle 2180 mm long 75x75x6 (Approx. 3 span per km.)
379ACSR conductors of following sizes with jointing sleeves, binding materials,pG clamps, bi-metallic clamp, hardware etc for overhead line and jumpers as required as per technical specification,approved drawings and scope of work:
3806/4.72 + 7/1.57 mm (100 mm2 Al.area ) - Dog
381Supply of 33 KV Lineunderground railway crossing ensuring statutory clearances as required as per technical specification, approved drawings and scope of work
382Supply of 33 KV3Cx300 Sqmm XLPE Armored Cable (2 Nos including one spare) Accessories like 160mm dia HDPE pipes for road crossing and 150 mm dia GI pipegrade B for pole support outdoor heat shrinkable cable jointing kits, Lugs,CablePath markers, bi metallic clamps, 7/20 GI wire as per technical specification, approved drawing and scope of work
383Supply for Feeder Bifurcation of 3 phase 11 kV line using additional supports matching with length and type of existing support asper technical specifications, scope of works and approved drawings
384Supply of 8.5 meter long /180 KG PCC Poles (PCC Pole as per state practice)
385Supply of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
386Supply for Augmentation of 3 phase 11 kV line using new Pre-fabricated hot dip galvanized steel items like V cross arm, top channel, top clamp, Cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle, MS flats pole extension canal with welded plate, anti climbing device clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
387Supply of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
388Supply of Pole accessories as per technical specification, approved drawing and scope of work
389Supply of 11 KV danger board
390Stone Pad(300x300x75mm)
391Supply of GI Barbed wire 12 SWG
392Supply for Augmentation of 3 phase 11 kV line replacing existing conductor with following type of new ACSR conductor including jointing sleeves, binding material and helicon formed fittings etc as required as per technical specification, approved drawings and scope of work.
393Supply of 6/2.59 + 1/2.59 mm (30 mm² Al. Area) - Weasel conductor
394Supply of 6/3.35 + 1/3.35 mm (50 mm² Al. Area) - Rabbitconductor
395Supply of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog conductor
396Supply for Augmentation of 3 phase 11 kV line using new Insulator and hardware as per technical specification, approved drawings and scope of work
397Supply of 11 KV 45 KN polymer Disc insulator along with suitable hardware fittings
398Supply of 11 KV 5 KN Polymer Pin Insulators with suitable hardware fittings
399Supply for Augmentation of 3 phase 11 kV line using new Earthing arrangement as per technical specifications,approved drawings and scope of work.
400Supply of GI Earthing spike made of 20x2500mmsolid Rod
401Supply for Augmentation of 3 phase 11 kV line using new Stay Set (Galvanized) with 50x8 mm stay clamp, 1 no. guy insulator, anchor plate (200x200x6mm) , nut bolts, 1no. turn-buckles, 1.8 m long 16 mm diameter solid GI stay rod & 7/3.15 mm dia GI strandedwire complete as per technical specification, approved drawings and scope of work.
402Supply for Augmentation of 3 phase 11 kV line using new GI wire for earthing and guarding as per technical specification, approved drawings and scope of work.
403Supply of 6 SWG GI wire
404Supply of 8 SWG GI wire
405Supply of Conductor accessories as per technical specification, approved drawing and scope of work
406Supply of PG Clamp for Weasel to Weasel conductor
407Supply of PG Clamp for Dog to Dog conductor
408Supply of PG Clamp for Rabbit to Rabbit conductor
409Aluminium Jointing sleave for ACSR Rabbit
410Aluminium Jointing sleave for ACSR Weasel
411Aluminium Jointing sleave for ACSR DOG
412Supply of 11 KV Lineunderground railway crossing ensuring statutory clearances as required as per technical specification, approved drawings and scope of work
413Supply for 11 KV lineunder ground Railway crossing with 2 nos (Including one spare) 3Cx185 Sqmm XLPE Armored Cable (0.3 km each) using 150mm dia GI pipes (grade A for underground laying and grade B for pole support), Outdoor heat shrinkable cable jointing kit, 11 KV LIGHTENING ARRESTOR STATION CLASS 10KA (6 NOS.), LUGS, 4 Nos GI 3-Meters LONG pipe EARTHING, 6 SWG GI WIRES,CABLE MARKERS, BI METALLICK CLAMPS and JUMPERING etc AS REQUIRED AS PER TECHNICAL SPECIFICATIONS, DRAWINGS AND SCOPE OF THE WORK.
414Supply of 12 KV 3ph Indoor type switch gear and 11 KV XLPE cable as per technical specifications, approved drawings and scope of works:
415Supply of Indoor type 12 KV 3 Ph 1250 A VCB with control and protection system for out going feeder consisting ofCT, A-meter, volt-meter, Relays, energy meter (TVM) DLMS compliant & accessories complete as per specifications for feeder breaker
41611 KV 3X 185 sqmm XLPE armored Power cable, aluminum stranded conductor, including their termination materials like indoor and outdoor termination kit, glands, lugs, tagging, cable path marker etc as required as per technical specifications, approved drawings and scope of the works.
417Supply of 11KVAgriculture Feeder Splitting due to overloading as per approved drawings, technical specifications and scope of work
418Supply of 8.5 m/180 kgs PCC Poles (PCC Pole as per state practice)
419Galvanized Stay Set for LT line with anchor plate (200x200x6mm), 50x8mm stay clamp, 1 no. Stay guy insulator, nut bolts, 1 no. turn buckles, 1.8 m long, 16 mm diameter solid GS Stay rod & 7/3.15 mm Dia GI stranded wire etc as required as per technical specification, approved drawings and scope of work.
420New Earthing as per approved drawings, technical specifications and scope of work
421Supply of Spike Earthing made of 20mm X 2500 mm GI solid Rod
422Supply of 8 SWG GI wire for earthing and guarding
423Supply of following LT AB XLPE Cable for New AB XLPE Cable as required as per technical specification, approved drawings and scope of work:
424Supply of Aerial bunchedXLPE cable 3 X 50 sqmm+1x35 sqmm.(bare messenger wire)+1x16 sqmm.
425Supply of Pole mounted LT Distribution box as per approved drawings, technical specifications and scope of work
426Supply of Three phase SMC Distribution box with clamps
427Supply of Single phase SMC Distribution box with clamps
428Supply of XLPE insulated Al. cable for energisation of distribution box/ Kiosk as per approved drawings, technical specifications and scope of work
429Suppply of 2Cx25 SQMM Stranded Unarmoured Cable (Al Conductor ) for chargingSingle Phase DB
430Suppply of 4Cx35SQMM Stranded Unarmoured Cable (Al Conductor ) for chargingThreePhase DB
431Supply of Stone pad (300x300x75)
432Supply of Accessories for AB XLPE Cable as per approved drawings, technical specifications and scope of work
433HDG LT Pole Clamp with nut & bolt for laying ABC
434Dead end Clamp with I-Hook( Insulated)
435Suspension Clamp with I-Hook ( Insulated)
436PG Clamps 16 Sq mm .- 50 sq mm to 16-50 sqmm (For line to line jumpering of massenger wire & energizing DB Neutral)
437LT insulation Piercing Connectors of 16-50 sqmm to 16-50 sqmm size for energizing distibution Kiosk/box
438Pre-Insulated Compression connectors size 16 sqmm suitable for AB XLPE cable
439Pre-Insulated Compression connectors size 50 sqmm suitable for AB XLPE cable
440Heat shrinkable type end cap for AB XLPE cable
441New Distribution Transformer with all accessories as per as per technical specification, approved drawings and scope of work.
44211 /0.433 KV 25 KVA T/F (BEE standard Three Star Self protected type)
443Supply of 8.5m/180 kgs PCC Poles - (PCC Pole as per state practice)
444Supply for distribution transformer mounting using new Pre-fabricated hot dip galvanized steel items like V cross arm, MS top channel, top clamp, Cross arm, Bracket, Clamps, cross bracings, bracings, strain plate, back clamp, MS angle, MS Channel, MS transformer base channel, MS flats pole extension channel with welded plate, anti climbing device clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
445Supply of hot dip galvanized MS Nuts, Bolts with Washersas per technical specification, approved drawings and scope of work.
446Supply of 11 KV danger board
447Supply of Stone Pad 300X300X75
448Supply of Stay Set (Galvanized) with 50x8 mm stay clamp, stay guy insulator (1 Nos.), anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI strandedwire complete as per technical specification, approved drawings and scope of work.
449Supply of Insulator and hardware as per technical specification, approved drawings and scope of work.
450Supply of 11 KV45 KN polymer Disc insulator along with suitable hardware fittings
451Supply of 11 KV 5 KN Polymer pin insulator with Pin
4529 KV 5 KA Distribution Class Lightening Arrester for DT as per technical specification, approved drawings and scope of work.
45311 kV, 3-ph, 200 A, 3 Pin type, Vertical Mounting type, Gang Operated,TPMO Switch along with Support Insulators, Base Channel, down Pipe, Arcing Horns etc. complete asper technical specifications, scope of works and approved drawings
45411 kV, 200 Amp, 3-ph, Horn Gap fuse units (set of 3 units) along with Support Insulators, Base Channel, fuse barrel etc. complete asper technical specifications, scope of works and approved drawings
455Supply of Earthing arrangement as per technical specifications,approved drawings and scope of work.
456Supply of Spike Earthing 20mm X 2500 mm GI solidRod
457Supply of Chemicalrod earthing including electrode, chemical, with 3000mm long, 40 mm diameterGI pipe, GI Strip of 24x3mm.
458Supply of 6 SWG GI wire for earthing
459Outdoor mounting type Distribution box made of MS sheet of thickness not less than 18 SWG CRCA sheet by deep drawn method, dust and moisture vermin, weather proof with degree of protection with suitable bus bars, Modem Compatible DLMS Compliant LT Trivector Static Meter with suitable CTs, earthing bus, earthing terminals, box illumination, front door operated with proper locking arrangement, lugs, mounting channel frame, internal wiring with FRLS cables, danger plate, numbering, back clamps, hardware as per scope of the work, technical specifications and approved drawings, direction of Engineer in Charge suitable for following transformer:
4603 Ph 25 KVA transformer 40 A TPN MCCB (incomer) and 6 Nos. 25 A SP MCCB (outgoing)
4611.1 KV XLPE Aluminium Conductor, Stranded, unarmoured cable for connection of transformer LV bushing to Distribution Box and Distribution box to overhead line as per Scope of work, technical specification and approved drawings:
4621CX35 sqmm aluminium conductor cable
463ACSR Rabbit Conductor for jumpering including PG Clamps, bi-metallic connectors, hardware etc as per technical specifications, approved drawings and scope of works.
464Supply for Augmentation of 3 phase 33 kV line using additional supports matching with length and type of existing support asper technical specifications, scope of works and approved drawings
465Supply of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
466Supply of 9 m PCC Poles - (PCC Pole as per state practice)
467Supply New Pre-fabricated hot dip galvanized steel item, for augmentation of 33 KV line, like V cross arm, top channel, top clamp, cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp,MS angle (65x65x6mm), MS flats (65x8mm) anti climbing device clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
468Supply of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
469Supply of Pole accessories as per technical specification, approved drawing and scope of work
470Supply of 33 KV danger board
471Supply of GI Barbed wire 12 SWG
472Supply for Augmentation of 3 phase 33 kV line replacing existing conductor with following type of new ACSR conductor including jointing sleeves, binding material, aluminum tape and helical Preformed fittings etc as required as per technical specification, approved drawings and scope of work.
473Supply of 30/3.00 + 7/3.00 mm (200 mm² Al. Area) - Panther conductor
474Supplyof new Insulator and hardware for Augmentation of33 kV line as per technical specification, approved drawings and scope of work
475Supply of 33 KV 70 KN polymer Disc Insulator along with suitable hardware fittings
476Supply of 33 KV 10 KN Polymer Pin Insulators
477Supply of new Earthing arrangement for Augmentation of33 kV line as per technical specifications,approved drawings and scope of work.
4788 SWG GI Coil 115 turns (1.85 Kg)
479Supply of new Stay Set (Galvanized) for 33 kV line with 50x8 mm stay clamp, 2 nos. guy insulator, anchor plate (300x300x8mm) , nut bolts, 1 no. turn-buckles, 1.8 m long, 20 mm diameter solid GS stay rod & 7/4.00 mm dia GI strandedwire complete as per technical specification, approved drawings and scope of work.
480Supply of new GI wire for earthing and guarding for Augmentation of33 kV line as per technical specification, approved drawings and scope of work.
481Supply of 6 SWG GI wire
482Supply of 8 SWG GI wire
483Supply of Conductor accessories as per technical specification, approved drawing and scope of work
484Supply of PG Clamp for Panther to panther conductor
485Supply of 11 kv Reconductoring of Feeder ( Older than 25 years ) as per approved drawings, technical specifications and scope of work
486Supply of 8.5 meter long /180 KG PCC Poles (PCC Pole as per state practice)
487Supply for Augmentation of 3 phase 11 kV line using new Pre-fabricated hot dip galvanized steel items like V cross arm, top channel, top clamp, Cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle, MS flats pole extension canal with welded plate, anti climbing device clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
488Supply of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
489Supply of Pole accessories as per technical specification, approved drawing and scope of work
490Supply of 11 KV danger board
491Stone Pad(300x300x75mm)
492Supply of GI Barbed wire 12 SWG
493Supply for Augmentation of 3 phase 11 kV line replacing existing conductor with following type of new ACSR conductor including jointing sleeves, binding material and helicon formed fittings etc as required as per technical specification, approved drawings and scope of work.
494Supply of 6/3.35 + 1/3.35 mm (50 mm² Al. Area) - Rabbit by replacing existing weasel/squirrel conductor- On 11 mtr STP
495Supply of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog by replacing existing racoon/rabbit conductor on 11 Mtr STP
496Supply for Augmentation of 3 phase 11 kV line using new Insulator and hardware as per technical specification, approved drawings and scope of work
497Supply of 11 KV 45 KN polymer Disc insulator along with suitable hardware fittings
498Supply of 11 KV 5 KN Polymer Pin Insulators with suitable hardware fittings
499Supply for Augmentation of 3 phase 11 kV line using new Earthing arrangement as per technical specifications,approved drawings and scope of work.
500Supply of GI Earthing spike made of 20x2500mmsolid Rod
501Supply for Augmentation of 3 phase 11 kV line using new Stay Set (Galvanized) with 50x8 mm stay clamp, 1 no. guy insulator, anchor plate (200x200x6mm) , nut bolts, 1no. turn-buckles, 1.8 m long 16 mm diameter solid GI stay rod & 7/3.15 mm dia GI strandedwire complete as per technical specification, approved drawings and scope of work.
502Supply for Augmentation of 3 phase 11 kV line using new GI wire for earthing and guarding as per technical specification, approved drawings and scope of work.
503Supply of 6 SWG GI wire
504Supply of 8 SWG GI wire
505Supply of Conductor accessories as per technical specification, approved drawing and scope of work
506Supply of PG Clamp for Dog to Dog conductor
507Supply of PG Clamp for Rabbit to Rabbit conductor
508Supply of Automatic Capacitor Bank as per approved drawings, technical specifications and scope of work (1.98 MVAr With APFC Panel)
50912.65 kV, 1980 kVAr, 3-Phase, 50 C/s, Outdoor Type , Capacitor bank having two variable step of 792 Kvar & one Variable steps of 396 kVAr. Bank shall be complete with Capacitor units of 264/132 kVAr,Aluminium busbars, Pin & Post insulators, Expulsion fuses etc.(1.98 MVAr HT Capacitor bank)
5100.52 kVAr for 792 kVAr step(1.98 MVAr HT Capacitor bank)
5110.25 kVAr for 396 kVAr step(1.98 MVAr HT Capacitor bank)
51211 kV, 3-Phase Oil-Cooled RVT(1.98 MVAr HT Capacitor bank)
51312 kV 3 Phase Indoor type metal enclosed Vacuum Capacitor switches.(1.98 MVAr HT Capacitor bank)
51411 kV, 400 Amp, Off Load Isolator with earth switch and mounting structure.(1.98 MVAr HT Capacitor bank)
5159 kV, 10 kA,Station Class, Lightning Arrestors(1.98 MVAr HT Capacitor bank)
516Indoor Type Automatic Control Unit(1.98 MVAr HT Capacitor bank)
517IP 55 , Outdoor CRCA cubicle Panel for accomdating capacitors,Series Reactor,Vacuum contactor,Surge arrestor,Fuses(1.98 MVAr HT Capacitor bank)
518Control cables, lugs/thimble, Junction Box etc.(1.98 MVAr HT Capacitor bank)
51911 KV 3 Core Al. XLPE Insulated 3x120 mm sq. Cable(1.98 MVAr HT Capacitor bank)
52011KV XLPE Cable(3x185 sq.mm.) Heat Shrinkable Jointing kit Indoor(1.98 MVAr HT Capacitor bank)
52111KV XLPE Cable(3x185 sq.mm.) Heat Shrinkable Jointing kit Outdoor(1.98 MVAr HT Capacitor bank)
52211 KV VCB Switchgear with complete arangement for connection with existing 11 KV bus bar.(1.98 MVAr HT Capacitor bank)
523Earthing for Panel and LA"s by pipe in pipe earthing(1.98 MVAr HT Capacitor bank)
5243.96 MVAr With APFC Panel
52512.65 kV, 3960 kVAr, 3-Phase, 50 C/shoused in Outdoor Type CRCA Panel, Capacitor bank having two variable step of 792 Kvar & two Variable steps of 1188 kVAr. Bank shall be complete with Capacitor units of 396/264 kVAr,Aluminium busbars, Pin & Post insulators, HRC fuses,Surge arrestor etc.including structure for complete equipments (3.96 MVAr HT Capacitor bank)
5260.52 kVAr for 792 kVAr step(3.96 MVAr HT Capacitor bank)
5270.8 kVAr for 1188 kVAr step(3.96 MVAr HT Capacitor bank)
52811 kV, 3-Phase Dry Type RVT(3.96 MVAr HT Capacitor bank)
52912 kV 3 Phase Indoor type metal enclosed Vacuum Capacitor switches.(3.96 MVAr HT Capacitor bank)
53011 kV, 400 Amp, Off Load Isolator with earth switch and mounting structure.(3.96 MVAr HT Capacitor bank)
5319 kV, 10 kA,Station Class, Lightning Arrestors(3.96 MVAr HT Capacitor bank)
532Indoor Type Automatic Control Unit(3.96 MVAr HT Capacitor bank)
533IP 55 , Outdoor CRCA cubicle Panel for accomdating capacitors,Series Reactor,Vacuum contactor,Surge arrestor,Fuses(3.96 MVAr HT Capacitor bank)
534Control cables, lugs/thimble, Junction Box etc.(3.96 MVAr HT Capacitor bank)
53511 KV 3 Core Al. XLPE Insulated 3x120 mm sq. Cable(3.96 MVAr HT Capacitor bank)
53611KV XLPE Cable(3x185 sq.mm.) Heat Shrinkable Jointing kit Indoor(3.96 MVAr HT Capacitor bank)
53711KV XLPE Cable(3x185 sq.mm.) Heat Shrinkable Jointing kit Outdoor(3.96 MVAr HT Capacitor bank)
53811 KV VCB Switchgear with complete arangement for connection with existing 11 KV bus bar.(3.96 MVAr HT Capacitor bank)
539Earthing for Panel and LA"s by pipe in pipe earthing(3.96 MVAr HT Capacitor bank)
540Supply of Earthing of existing substation and Distribution Transformer
541Supply of Spike Earthing 20mm X 2500 mm GI solidRod
542Supply of Pipe rod earthing with 3000mm long, 40 mm diameterGI pipe, GI Strip of 24x3mm.
543Supply of 8 SWG GI wire for earthing
544Supply of Renovation and Modernization of Existing Substation, Battery Charger and Battery set
54524V, 150 AHPb(Lead) Acid battery, battery standmade of teakwood duly painted with anti acid resistive paint, battery insulators, inter-battery wiring using 30 sqm, 1.1 kv, copper single coremulti strand cable, terminal connectors, Rubber mats & all other accessories and connectors as per technical specifications.
54624V, 150 AH.Float-cum-Boost Battery Charger with full wave rectification for230V,1 phase, 50 Hz AC Input Supply as per technical specifications.
547MS Galvanised structures (all Type) made of joist / channel / angle / flat of different sections as per approved drawings. All structural steel members shall be galvanized after fabrication as per IS:4759 for all structural members. 3.5mm spring washers are to be used under each structural steel shall conform to IS 2026. All weld shall be 6mm filled weld unless specified otherwise.Anchor plat shall be of relevant IS
548GI bolts & nuts, washers etc. (all Type) should be as per approved drawings & TS. All bolts & nuts, washers etc. shall be galvanizedas per IS:4759. 3.5mm spring washers are to be used under each nut shall conform to IS 2026.All nuts and bolts shall be of property class 5.6 of IS 1367. Plain washers shall be as per IS 2016 & spring washers shall be IS: 3063 and foundation bolts, shall be of relevant IS
54936kV, 1250A,25kA for 3 seconds, 3-ph, Outdoor typeVacuum Circuit breaker with marshalling box etc Complete in all respect along with support structure.
55036kV, 1-Phase, 25kA/3 seconds,800-400-200/1-1-1 Amps ( having 3 secondery, core), 1 set = 3 Nos outdoortype Current Transformers along with junction box (1 no junction box for 3 no of 1-phase CTs), as required as per technical specifications complete in all respect.
55136kV, 1-Phase, 25kA/3 seconds,33 Kv/110 V single core outdoortype Potential Transformers along with junction box, as required as per technical specifications complete in all respect.
55230 kV, 10kA, 1-ph Station Class Lightening Arrester complete(1 set= 3 Nos.)
55336kV, 800A, 25kA , 3-ph double break center rotating type (DBCR), Gang Operated,isolator alongwith Support Insulators, OperatingMechanism, Base Channel down Pipe and all required accessories complete as per Technical Specifications. (with Earth Switch)
55433 kV feeder Panel (without diffirential relays) with arrangements for DLMS(modem compactible ) Trivector Static Energy Meter complete
55512 kV, 1250 A, 25kAfor 3 seconds, 3-ph, indoor typeVacuum Circuit BreakerforIncomer along with 12 kV, 1-Phase, 25kA, 600-300/5-5 A, 3 Nos indoor type Current Transformer 3 Core, Potential Transformer 11KV/110 V, indoor mounting type control panel for incoming breaker and required accessories, A-meter, volt-meter, 3-phase , withDLMS(modem compactible ) Tri Vector energy meter, Numerical Relays & accessories complete as per specifications for transformer breaker protectionwith earth fault, overcurrent .
55612 kV, 1250 A, 25kAfor 3 seconds, 3-ph, indoor typeVacuum Circuit Breakerforalong with 12 kV, 1-Phase, 25kA, 600-300/5-5 A,3 Nos indoor type Current Transformer, control panel for Bus couplar and required accessories, A-meter, Numerical Relays & accessories complete as per specifications for Bus Coupler protectionwith earth fault, overcurrent .
55712 KV 3 Ph 1250 A, 25kAfor 3 seconds, 3-ph, indoor typeVacuum Circuitbreaker along with 12 kV, 1-Phase, 25kA, 11 kv/110v,indoor type PotentialTransformer,indoor mounting type control panel and required accessories, A-meter, Numerical Relay & accessories complete as perspecifications for feeder breaker protection & Protection for Earth fault and over current) with extensible arrangement for future
5589kV, 10kA, 1-ph Station Class LighteningArrester complete (1 Set = 3 Nos.)
55912kV, 630 A, 25kA for 3 seconds, 3-ph double break center rotating type (DBCR), Gang Operated,isolator along with Support Insulators, Operating Mechanism, Base Channel down Pipe and all required accessories complete as per technical specifications, scope of works and approved drawings .
56011 kv Bus-Coupler with all required accessories complete as per technical specifications, scope of works and approved drawings .
561Supply of 3CX300 Sqmm 33 KV XLPE Armored Cable
562Supply of 33 KV3Cx300 Sqmm XLPE Armored Cable (2 Nos including one spare) Accessories like 160mm dia HDPE pipes for road crossing and 150 mm dia GI pipegrade B for pole support outdoor heat shrinkable cable jointing kits, Lugs,CablePath markers, bi metallic clamps, 7/20 GI wire as per technical specification, approved drawing and scope of work
563Supply of 3Cx185 Sqmm 11 KV XLPE Armored Cable
564Supply of 11 KV3Cx185 Sqmm XLPE Armored Cable (2 Nos including one spare) Accessories like 160mm dia HDPE pipes for road crossing and 150 mm dia GI pipegrade B for pole support, GI Brackets, cable fixing U clamp with suitable nut & bolts, outdoor heat shrinkable cable jointing kits, Lugs,CablePath markers, bi metallic clamps, 7/20 GI wire as per technical specification, approved drawing and scope of work
565Supply of DT Capacitor with Fitting as per Technical Specification, Approved Drawing and scope of work
566Supply of LT Shunt capacitor 440 Volt 10 KVAr 3Phase 50Hz IP65
567Supply of LT Shunt capacitor 440 Volt 25 KVAr 3Phase 50Hz IP65
568LT Line with XLPE Armoured Cable in high loss area
5698.5 m/180 kgs PCC Poles (PCC Pole as per state practice)
5709 M long steel Tubular poles with welded steel base plate of Designation 410 SP 31
571Supply of Pole accessories as per technical specification, approved drawing and scope of work
572Supply of Stone Pad 300X300X75
573Supply of Stay Set (Galvanized) with 50x8 mm stay clamp, stay guy insulator (1 Nos.), anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI strandedwire complete as per technical specification, approved drawings and scope of work.
574Supply of Single core XLPE armoured cable as per technical specifications, approved drawings and scope of work.
5751.1 kV Single Core 25sqmm XLPE armoured cable (1Cx25 sqmm)
5761.1 kV Single Core 50sqmm XLPE armoured cable (1Cx50 sqmm)
5771.1 kV Single Core 95sqmm XLPE armoured cable (1Cx95 sqmm)
5781.1 kV Single Core 120sqmm XLPE armoured cable (1Cx120 sqmm)
579LT cross arm arrangement angel (50x50x6mm) (50x8mm) (weight-9.41 kg)with Nuts and bolts
580LT cross arm arrangement angel (75x75x8mm) (65x8mm) (weight-18.6 kg) with Nuts and bolts
581C-Clamp with Nut & bolts
582LT shakle insulator
583Distribution tie for shakle insulator
584Mid span joint 25sqmm
585Mid span joint 50sqmm
586Mid span joint 95sqmm
587Mid span joint 120sqmm
588Single phase 20SWG CRCA MS sheet by deep drawn/sheet bending processPole top distribution box with calmps (50x6 mm) and nut & bolts and lugs suitable for 25 sqmm armoured cable
589Three phase 20SWG CRCA MS sheet by deep drawn/sheet bending processPole top distribution box with calmps (50x6 mm) and nut & bolts and lugs suitable for 50 sqmm armoured cable
590Three phase 20SWG CRCA MS sheet by deep drawn/sheet bending processPole top distribution box with calmps (50x6 mm) and nut & bolts and lugs suitable for 95 sqmm armoured cable
591Three phase 20SWG CRCA MS sheet by deep drawn/sheet bending processPole top distribution box with calmps (50x6 mm) and nut & bolts and lugs suitable for 120 sqmm armoured cable
592Suppply of 2Cx25 SQMM Stranded Unarmoured Cable (Al Conductor ) for chargingSingle Phase DB
593Suppply of 4Cx35SQMM Stranded Unarmoured Cable (Al Conductor ) for chargingThreePhase DB
594Supply of Spike Earthing 20mm X 2500 mm GI solidRod
5958 SWG GI wire for pole,DB earthingwith GI nuts, bolts & washers
596LT insulation Piercing Connectors of 16-150 sqmm size for energizing distibution Kiosk/box
597Erection of new 33/11 KV Substation Works as per Scope of work, Approved Drawings and Technical Specifications
598Civil works: Design, supply of all material, T&P, labour etc for the following civil works complete as per TS
599Soil Investigation & Contour Survey of Substation areaas per Technical Specification
600Earth Filling & Site Levelling
601Earth work in PSS site with ordinary soil (vide classification of soil item - A) obtained from borrow pits free from logs, stumps, roots, rubbish or any other ingredients likely to deteriorate or affect the stability of the (1.00 meter filling considered size 60*40) site surface including breaking the clods maximum to 60 mm. cube, placing the earth in layers not exceeding 225 mm in loose thickness, rough dressing including cost of cutting and removing shrubs, roots falling in borrow area all complete as per approved design & technical specification and as per direction of Engineer in Charge (payment will be made as per actual requirement per cubic meter)
602Antiweded treatment and stone spreading in switchyard area excluding road, Cable trench, Drainage etc (Stone Spreading 6 inches over 4 inches lean cement concrete layer as per technical specification, approved desgn and drawing and as per directon of Engineer in Charge. (payment will be made as per actual requirement per Square meter)
603Construction of Boundary Wall including Barbed Wire Fencing on MS angle over the Boundary Walland one Gate per Substation, including Supply, Fabrication, Fixing, Painting all complete as per approved Drawing & Technical Specification and as per directon of Engineer in Charge in all 33/11 kV new sub-stations(payment will be made as per actual requirement per meter)
604Security fencing along with one switchyard gate per Substation as per Technical specifications in all 33/11 kV new sub-stations - to isolate electrical yard and as per directon of Engineer in Charge in all 33/11 kV new sub-stations(payment will be made as per actual requirement per meter)
605Design, engineering and construction of Control Room Building ( Hall of control room building -16 x 8 Mtr.(size may vary as per availability of land) and Guard room, store room, Battery room, Incharge room & Wash room etc.) including supply of T&P, Labour, Cement, Reinforcement Steel, Form Work, Excavation etc, all complete as per Technical Specification and Approved Drawing and as per directon of Engineer in Charge in all 33/11 kV new sub-stations(payment will be made as per actual requirement per Sq. meter plinth area)
606Design, engineering and construction of Cable Trench of 0.75 Mtr wide , 1.0 Mtr. depth, precast RCC Trench Cover, Water stops, Brick Work wherever required includingsupply of T&P, Labour, Cement, Sand,Reinforcement Steel, Steel Angles, Flats, Form Work, Excavation and providingcement plaster (1:4) including floating coat of cement punning (1.5 MM) with clean pores sand etc, all complete as per Technical Specification, approved Drawing and as per directon of Engineer in Charge in all 33/11 kV new sub-stations(payment will be made as per actual requirement permeter)
607Design, engineering and construction of Drainage System in the Substation premises includingsupply of T&P, Labour, Cement, , bricks, Form Work, Excavation etc, all complete as per design, Technical Specification and Tender Drawings in all 33/11 kV new sub-stationas as per directon of Engineer in Charge in all 33/11 kV new sub-stations(payment will be made as per actual requirement permeter)
608Design, engineering and construction of PCC road, footpath including supply of T and P, labour, brick, stone and stonechips, earth,and excavation, compaction etc. all complete as per Technical specifications.
609width of PCC road3.75 m- in M20, 200 mm Thick over compacted WBM in three layers (Grade-I-100 mm thick, Grade-II-75 mm thick, Grade - III - 75mm thick) etc as per PWD Specification and direction of Engineer In Charge. (payment will be made as per actual requirement per meter)
610width of footpath 1.5 m-PCC in M15, 150 mm Thick over Brick on edge soling over 75 mm thick local sand filling etc as per PWD Specification and direction of Engineer In Charge. (payment will be made as per actual requirement per meter)
611Stone pitching over sloping including supply of stone and surface preparation as per drawing and as per direction of Engineer in charge.(payment will be made as per actual requirement per Sq. meter)
612Sinking of tube well and installation of motor operated submersible pump of suitable capacity with 1000 ltr. Sintex or reputed make water tank including GI Pipe(heavy duty) pipe line and sanitary fittings complete in all respect fortoilets , drinking water and providing water tap near the power transformer for watering the earth pit as per requirement. The depth of Tube-Well should be minimum 80 mtr.
613Design, Engineering and construction of transformer foundation, erection, filtration, testing and commissioning of 33/11 kV, 3 ph, 50 Hz, ONAN, Cu Wound, Outdoor Conventional type Power Transformer along with transformer oil, Buchholtz relay, breather, OTI & WTI, Marshalling Box, Conservator tank, oil level indicator, valves, 2 sets of 50x8 mm GS Neutral Earthing strips with braided conductor on bushing end supported with insulators, OTI & WTI Indicators, Vent explosion plug, control wiring / cabling, cable supporting tray on the body, transformer wheels, bushing and extended copper connector made of 50x10 mm copper flat for connection of 11 KV side bushing with suitable bolts nuts and washers of Brassetcas required . 2 sets of body earthing with 50x8 mm GS Strip as per TS and as per direction of Engineer in Charge
6145 MVA with off load tap changer
61510 MVA with off load tap changer
616Design, Engineering, providing and construction of transformer support/foundation, erection, testing and commissioning of 100 KVA, 11/0.415 kV, 3 ph, 50 Hz, ONAN, outdoor type (three star rated) Station Transformer on double pole structure alongwith HG Fuse set, AB Switch/ Isolator, LA, Earthing, etc complete to complete the erection testing & commissioning of SST as required as per specifications & drawings complete in all respect.as per direction of Engineer in Charge
617Excavation, erection, cement concrete foundation, erection, testing and commissioning of all type of structures i.e. Gantry/Swing bus/isolator/CT/PT/PI/S.S.T structures etc. made of joist / channel / angle / flat of different sections as per approved drawings complete in all respect as per direction of Engineer in Charge
618Design, Engineering and construction of foundation , erection, testing and commissioning of 36kV, 1250A, 25kA for 3 seconds, 3-ph,Outdoor typeVacuum Circuit breakeralong with 36kV, 1-Phase, 25kA for 3 seconds, 800-400-200/1-1-1 Amp.or 800-400-200/1-1, Amps outdoor type Current Transformer along with junction box (1 no junction box for 3 no of 1-phase CTs)], Jumpers, earthing, supporting structures, maintenance platform, marshalling box, control & Power cabling between VCB and indoor control panel and required accessories complete as per approved drawings, technical specifications and scope of the work. as per direction of Engineer in Charge
619Design, Engineering providing and installation of ISMC 75 channel on top of indoor trench, erection of panels on ISMC 75 channels, welding, testing and commissioning of 33kV indoor Control & Relay panel along with E/F & O/C relays, control and power supply cabling in trench between field equipment and panels, Mimic Diagram, Voltmeter, Ammeter, Annunciation Windows with annunciation relays and other components etc as per approved drawings, technical specifications and scope of the work for controlling complete in all respect
62033 kV feeder Panel (without diffirential relays) withDLMS(modem compactible ) Trivector Static Energy Meter complete
62133 kV Transformer Panel (withdiffirential relays) withDLMS(modem compactible ) Trivector Static Energy Meter complete
622Design, Engineering and construction , Erection, testing and commissioning of 36kV, 800 A, 25kA , 3-ph double break center rotating type (DBCR), Gang Operated,isolator along with Support Insulators, Operating Mechanism, Base Channel down Pipe and all required accessories complete as per approved drawings, technical specifications and scope of the work,(with and without Earth Switch)
623Design, Engineering , Erection, testing and Commissioning of 30 kV, 10kA, 1-ph Station Class Lightening Arresters with mounting on erected structures, jumpering from bus bar, earthing connection using 50x6mm GS flat, hardware etc as required, as per approved drawings, technical specifications and scope of the work complete in all respect(1 Set= 3 Nos)
624Design, Engineering, Erection, testing and Commissioning of 9kV, 10kA, 1-ph Station Class Lightening Arrester with mounting on erected structure, jumpering from bus bar, earthing connection using 50x6mm GS flat, hardware, etc as required as per approved drawings, technical specifications and scope of the work.(1 Set=3 Nos)
625Design, Engineering and construction , Erection, testing and Commissioning of 36 kV, 1-Phase, 33kV/110 volt, Single coreoutdoor type Potential transformer along with junction box (1 no junction box for 3 no of 1-phase PTs) including control and power supply cabling,earthing connection using 50x6mm GS flat and required accessories etc., complete as per as per approved drawings, technical specifications and scope of the work,
626Design, Engineering and construction , erection, wiring, testing and commissioning of 12 kV, 1250 A/630 A , 25kA, 3-ph,indoor typeVacuum Circuit breakeralong with 12 kV, 1-Phase, 25kA for 3 seconds, 600-300-150/5-5 A and 1200-600-300/1-1-1 A CT , PT, andalong with control and relay panel consisting of Ammeter, volt-meter, E/F, O/C ,diff.Relay and 3 Phase Energy meter & accessories complete cabling between VCB and indoor control panel and required accessories complete as per approved drawings, technical specifications and scope of the work,
627For Transformer Protection
628For Feeder Protection
629For Bus Coupler
630Installation, initial charging, cabling, interconnection cabling, testing and commissioning of 30 V, 150 AHPb(Lead) Acid battery on battery stand made of teak wood duly painted with anti acid resistive paint, battery insulators, inter-battery wiring using 30 sqm copper single core multi strand cable, terminal connectors, & all other accessories and connectors as per as per approved drawings, technical specifications and scope of the work complete in all respect,
631Design, engineering, construction , Installation, interconnection cabling, testing and commissioning of 24V, 150 Amp.Float-Cum-Boost Battery Charger with full wave rectification for230 V,1 phase, 50 Hz AC Input Supply with DCDB (as per supply schedule) as per approved drawings, technical specifications and scope of the work complete in all respect
632Design, engineering, construction , Installation, interconnection cabling, testing and commissioning of 30V SupplyDCDB as per approved drawings, technical specifications and scope of the work & supply schedule complete in all respect.
633Design, engineering, construction , Installation, interconnection cabling, testing and commissioning of 415 V, ACDB as per approved drawings, technical specifications and scope of the work,
634Excavation, laying, welding, refilling, earthing & grounding of MS Flat as per Approveddrawing and erection of riser up to various equipment/structures as per scope of the work, specifications and approved drawings,
63575 x 8 mm MS flat for ground mat
63650 x 6 mm Galvanized GS flat (risers)
63725 mm dia MS Rod 3 m long for earth mat
638Excavation, erection, testing and commissioning of 40 mm dia., 3000 mm long GI pipe earth electrode by providing test link, RCC pit, RCC cover, placedon GI frame, Charcoal & Salt in alternate layer as per REC Specification and other accessories complete as per approved drawings, technical specifications and scope of the work for power transformer neutral, station transformer neutral, lightening arresters direct earthing.
639Erection, testing and commissioning of Bus Bar, jumpering and Dropper (Panther Conductor), by using all types of insulators, clamps and connectors etc. with all accessories complete in all respect.
640Erection, testing and commissioning of Sub-Station Lighting System (External+Internal) with proper illumination levels complete for Switchyard, Control Room building, Main gate and Sub station boundary including all associated materials etc complete in all respect as per applicable TS and approved drawing.
641Design, engineering,Erection, testing and commissioning ofFully automatic Capacitor bank with automatic control panel, isolator,indoor type suitable Vacuum Circuit Breaker, mounting structures, All types of cable (11 KV grade 185 sqmm, XLPE & control cable etc.) & its accessoriescomplete , earthing etc as required as per technical specifications, approved drawings, scope of the works of following capacities: (Banks in Muiltiple of 600 KVAR as per REC Specification)
6421980 KVAr
6433960 KVAr
644Erection, testing and commissioning of 2x2.5 sqmm control cablefor the commissioning of sub-station
645Erection, testing and commissioning of 4x2.5 sqmm control cable for the commissioning of sub-station
646Erection, testing and commissioning of 3.5x 95 sqmm LT power cable required for the commissioning of sub-station
647Laying & termination, Testing and commissioning of 11 KV grade, XLPE,power cable armored, aluminium conductor, stranded complete in all respectas per Technical Specification.
6483Cx 400 sqmm (armoured)
6493Cx 185 sqmm (armoured)
6503Cx35 Sqmm (Un -armoured)
651Design, Engineering and construction , Erection, testing and commissioning of 12 kV, 630 A, 25 kA, 3-phGang Operated, TPMO along with Support Insulators, Operating Mechanism, Base Channel down Pipe and all required accessories complete as per approved drawings, technical specifications and scope of the work, (with and without earth Switch)
652Erection, testing & commissioning of bus by using Panther conductor with all types of Clamps and Connectors and insulator as per TS & approved drawings (payment will be made as per actual requirement permeter)
653Excavation of pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications:
6548.5 m/180 kgs PCC Poles - (PCC Pole as per state practice)
655Erection of following types of poles for 11 KV double pole outgoing feeder line by installing danger plate, anti-climbing devices (barbed wire),pole numbering, earthing, including cement concrete foundation using 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and specifications:
656Erection of 8.5 m/180 Kgs PCC Poles withBase stone pad(state practices of PCC pole and base plate/stone to be used)
657Erection of New 33/11 KV Indoor GIS Type Substation as per Scope of work, Approved Drawings and Technical Specifications
658Installation & Commissioning of 10 MVA 33/11 kV Transformer with all complete assesories as per TS
659Erection of 33 KV GIS Panels with 2 line bays, 2 transformer bays, one bus coupler bay, Bus PT, all complete with numerical relays, facility for data transmission and remote control this includes PT raiser panel etc. if required.
660Erection of 11 KV GIS Panels with 6 line bays, 2 transformer bays, 1 station transformer bay & one bus coupler bay, Bus PT, all complete with numerical relays, facility for data transmission and remote control this includes PT raiser panel etc. if required. PT required for each of the bus section.
661Erection of 24 V, 150AH, Ni-Cd sealed type battery set and all other accessories complete.
662Erection of Float-cum-boost battery charger (SMPS based ) with full wave , full control rectification, 50Hz input voltage for charging 24V, 80 AH Battery alongwith DCDB, connectors etc. complete and connection with 24 V , 80AH Battery set and single phase AC input supply.
663Erection of 415V AC Distribution Board/Panel of sheet stealenclosed cubical floor mounting type for catering auxiliary power supply of the substaion etc. complete
664Erection of 100KVA, 11 kV/0.415 kv Station Transformer alongwith allaccessories as per TS.
665Erection of40mm dia 3000mm long GI Pipe (Medium Grade) earth electrodes & other accessories for treated earth erection is including of Excavation and other associated activities as per TS.
666Erection of 60x8 mm Galvanized flat for raiser for earthing as per TS
667Erection of 30 KV, 1 Phase, 10KA LA with all accessories as per TS.
668Erection of 9 KV, 1 Phase, 10KA LA with all accessories as per TS.
669Suplly & Laying of 3Cx300 sqmm. 33 KV cable (Panel to Transformer- 1 Run) with cable tray.
670Laying of 3Cx400 sqmm. 11 KV cable (Panel to Transformer- 2 Run) with cable tray.
671Laying of Control Cable of 2 core 2.5 sq. mm copper cable with cable tray and associated items
672Laying of Control Cable of 4 core 2.5 sq. mm copper cable with cable tray associated items
673Laying of Control Cable of 10 core 2.5 sq. mm copper cable with cable tray associated items
674Erection of 33 kV Silicon coated touchproof Indoor termination joint (Al) kit for XLPE 3 C X 300 sqmm
675Erection of 11 kV Silicon coated touchproof Indoor termination joint (Al) kit for XLPE 3 C X 400 sqmm(Incoming)
676Erection of 11KV XLPE Cable (3x400 Sq.mm.)outdoor Heat Shrinkable Termination kit boxes mounted with transformer.
677Erection of 11 kV Silicon coated touchproof Indoor termination joint (Al) kit for XLPE 3 C X 185 sqmm
678Erection of Complete lighting system for control room building,main gate and substation boundary including fans as per detailed Technical Specifications.
679Design, engineering and construction of Control Room Building (including indoor cable trench) including supply of T&P, Labour, Cement, Reinforcement Steel, Form Work, Excavation etc. all complete other associated works as per Technical Specification and Drawing in 33/11 kV new GISsub-station. ( On As it is where it is basis)
680Foundation for 10 MVA, 33/11 kV transformer including rail poles as per approved drawing as per TS( On As it is where it is basis)
681Construction of Boundary Wall (including supply of all material) with fixing of MS angle & Barbed Wire fencing all along the boundary wall incuding supply and fixing of main gate - complete with painting etc all as per approved drawing & TS ( Measurement for this purpose will include length of gate along boundary wall).( On As it is where it is basis)
682Construction of 3 meter wide RCC Approach Road (including supply of all material) all complete as per approved drawing & TS.
683Construction (including supply of all material) of RCC cable Trench alongwith pre-cast RCC Trench Cover, Brick Work wherever required all complete as approved Drawing & TS outside the control room building 0.50 Mtrs. Wide Trench.
684Erection for Augmentation/ Additional Power Transformers SCADA Compatible asper technical specifications, scope of works and approved drawings
685Civil works: Design, supply of all material, T&P, labour etc for the following civil works complete as per TS
686Earth Filling & Site Levelling
687Gravel filling in switchyard area excluding road and footpath as per TS.
688Design, engineering and construction of Cable Trench of 0.75 Mtr wide , 1.0 Mtr. depth, precast RCC Trench Cover, Water stops, Brick Work wherever required includingsupply of T&P, Labour, Cement, Sand,Reinforcement Steel, Steel Angles, Flats, Form Work, Excavation and providingcement plaster (1:4) including floating coat of cement punning (1.5 MM) with clean pores sand etc, all complete as per Technical Specification, approved Drawing and as per direction of Engineer in Charge. (Payment will be made as per actual requirement per Mtr.)
689Design, engineering and construction of Drainage System in the Substation premises includingsupply of T&P, Labour, Cement, , bricks, Form Work, Excavation etc, all complete as per design, Technical Specification and Tender Drawings in all 33/11 kV new sub-station as per direction of Engineer in Charge. (Payment will be made as per actual requirement per Mtr.)
690Substation works
691Design, Engineering and construction of transformer foundation, erection, filtration, testing and commissioning of 33/11 kV, 3 ph, 50 Hz, ONAN, Cu Wound, Outdoor Conventional type Power Transformer along with transformer oil , Buchholtz relay, breather, OTI & WTI, Marshalling Box, Conservator tank, oil level indicator, valves, 2 sets of 50x8 mm GS Neutral Earthing strips with braided conductor on bushing end supported with insulators, OTI & WTI Indicators, Vent explosion plug, control wiring / cabling, cable supporting tray on the body, transformer wheels, bushing and extended copper connector made of 50x10 mm copper flat for connection of 11 KV side bushing with suitable bolts nuts and washers of Brassetcas required . 2 sets of body earthing with 50x8 mm GS Strip as per TS and as per direction of Engineer in Charge.
6925 MVA
69310 MVA
694Dismantaling &Transportation from existing site to Store,Installation, Erection, Testing and Commisiioning of 5/8 MVAPower Transformerswithsuitable Clamps, Connectors, bolts nuts and washers of Brassetcas required with 2 sets each of body & neutral earthing with 50x8 mm GS Strip as per TS completely required for commissioning.
695Modification of existing Power Transformer foundation required for installation and commissionig of augmented 5/10 MVA Power Transformers completely as per TS. (As per requirement)
696Design, Engineering , erection, testing and commissioning of 36kV, 1250A, 25kA for 3 seconds, 3-ph,Outdoor typeVacuum Circuit breakeralong with 36kV, 1-Phase, 25kA for 3 seconds, 400-200/1-1-1 Amp.or 400-200/1-1, Amps outdoor type Current Transformer along with junction box (1 no junction box for 3 no of 1-phase CTs)], Jumpers, earthing, supporting structures, maintenance platform, marshalling box, control & Power cabling between VCB and indoor control panel and required accessories complete as per approved drawings, technical specifications, scope of the work and as per direction of Engineer in Charge.
697Excavation, erection, cement concrete foundation, erection, testing and commissioning of all type of structures i.e. Swing bus/isolator/VCB/CT/PT/PI structure etc. made of joist / channel / angle / flat of different sections as per approved drawings
698Design, Engineering providing and installation of ISMC 75 channel on top of indoor trench, erection of panels on ISMC 75 channels, welding, testing and commissioning of 33kV indoor Control & Relay panel along with E/F & O/C relays, control and power supply cabling in trench between field equipment and panels, Mimic Diagram, Voltmeter, Ammeter, Annunciation Windows with annunciation relays and other components etc as per approved drawings, technical specifications and scope of the work for controlling:
69933 kV Transformer VCB (with diffirential relays)
700Design, Engineering and construction , Erection, testing and commissioning of 36kV,800 A, 25kA, 3-ph double break center rotating type (DBCR), Gang Operated,isolator along with Support Insulators, Operating Mechanism, Base Channel down Pipe and all required accessories complete as per approved drawings, technical specifications and scope of the work, (with and without Earth Switch)
701Design, Engineering and construction , erection, testing and commissioning of 12kV, 1250A, 25kA for 3 seconds, 3-ph,Outdoor typeVacuum Circuit breakeralong with 12kV, 1-Phase, 25kA for 3 seconds, 600-300/1-1-1 Amp.(having 3 secondary core), outdoor type Current Transformer along with junction box (1 no junction box for 3 no of 1-phase CTs)], Jumpers, earthing, supporting structures, maintenance platform, marshalling box, control & Power cabling between VCB and indoor control panel and required accessories complete as per approved drawings, technical specifications and scope of the work.
70212 KV Control & Relay panel for12 KV VCB (suitable for 30 V DC tripping/closing coil and associated control Circuitry) alongwith, ElF & O/C relays, Static energy meter (class 0.5 with communication port) , Mimic Diagram, Voltmete, Ammeter, etc complete as per REC
703Design, Engineering , Erection, testing and Commissioning of 30 kV, 10kA, 1-ph Station Class Lightening Arresters with mounting on erected structures, jumpering from bus bar, earthing connection using 50x6mm GS flat, hardware etc as required, as per approved drawings, technical specifications and scope of the work complete in all respect(1 Set= 3 Nos)
704Design, Engineering, Erection, testing and Commissioning of 9kV, 10kA, 1-ph Station Class Lightening Arrester with mounting on erected structure, jumpering from bus bar, earthing connection using 50x6mm GS flat, hardware, etc as required as per approved drawings, technical specifications and scope of the work.(1 Set=3 Nos)
705Excavation, laying, welding, refilling, earthing & grounding of conductor as perApprovedElectrical Layout for each sub station with ten no of treated 40mm dia, 3000 mm long GI pipe (Medium gauge) earth electode by providing test link, RCC pit, RCC cover, placedon GI frame,Charcoal & Salt in alternate layer as per REC Specification and other accessories complete as per approved drawings, technical specifications and scope of the work for power transformer neutral, station transformer neutral up to various equipment/structures as per scope of the work, specifications and approved drawings etc (treated earthing)
706Erection, testing and commissioning of Bus Bar, jumpering and Dropper (Panther conductor), by using all types of insulators, clamps and connectors etc. with all accessories complete in all respect.
70711 kV, 3-ph, 200 A, 3 Pin type, Vertical Mounting type, Gang Operated,TPMO Switch along with Support Insulators, Base Channel, down Pipe, Arcing Horns etc. complete asper technical specifications, scope of works and approved drawings
708Erection, testing and commissioning of 2x2.5 sqmm control cablefor the commissioning of sub-station
709Erection, testing and commissioning of 4x2.5 sqmm control cable for the commissioning of sub-station
710Dismentling of existing dismentled materials and devolution ofthe dismantled materialsincluding storage, handling, insurance, loading, unloading, transportation to store of Utility as per the direction of Engineer-in-charge with propoer accounting as per the inventory.
711Excavation ofpole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications:
7128.5 m/180 kgs PCC Poles - (PCC Pole as per state practice)
713Erection of following types of poles for 11 KV double pole outgoing feeder line by installing danger plate, anti-climbing devices (barbed wire),pole numbering, earthing, including cement concrete foundation using 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and specifications:
714Erection of 8.5 m/180 Kgs PCC Poles withBase stone pad(state practices of PCC pole and base plate/stone to be used)
715Erection for New 33 KV Line
716Excavation of pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications:
717Erection of 9 m PCC Poles - (PCC Pole as per state practice)
718Erection of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
719Erection of 13 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
720Erection of following types ofpoles by installing danger plate, anti-climbing devices (barbed wire), Painting with red oxide & aluminum paint including paint, pole numbering including cement concrete foundation using 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and specifications:
721Erection of 9 PCC Poles with Base pad including Cement concreting, (state practices of PCC pole, stone to be used)
72211 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
72313 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
724Excavation of stay pit for 33 KV Stay in following type of soils,as per scope of work, approved drawings and specifications:
725Normal soil
726Erection of complete stay set with GI stay wire (7x4.00 mm dia), binding of stay wire, by providing Guy stay insulator and 0.3 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
727Erection, testing & commissioning of new Pre-fabricated HDG steel items like V cross arm, top clamp, cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, etc made of MS Channels, MS angle, MS flats of given sizes for over head structures as per technical specification, approved drawings and scope of work.
728Dismantling of existing overhead line conductor and fittings, depositing the dismantled material to employer"s store and laying out & stringing of new ACSR conductor of following sizes by providing jointing sleeves, binding wire & tape & helical formed fittings etc as required as per technical specification, approved drawings and scope of work.
729Erection of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog conductor
730Digging of trench for laying of double circuit 33KV 3x300 sq.mm XLPE cable and making of trench for two nos cable with brick on both side, sand filling into the trench and finally trench will be covered with stone/Precast slab ("PuVVNL 33 KV HT" engraved) after laying of cable into the trench including providing and fixing cable route marker.
731Laying of 3x300 Sq. mm 33KV XLPE insulated cable underground in cable trenchesand earth filling of trenches
732Erection of Heat Shrinkable Jointing Kit Outdoor for 33 KV 3x300 sq. mm XLPE Cable
733Erection of Heat Shrinkable Jointing Straight Through Kitfor 33 KV 3x300 sq. mm XLPE Cable
734Laying of 160 mm dia. HDPE pipe by Horizontal drilling by HDD method as per site condition, for underground piping (trenchless) for road crossing.
735Laying of 33 KV 3x300 Sqmm. XLPE Cable underground through HDPEPipe at 1050 mm below the ground surface.(by HDD method) for road crossing including providing and fixing cable route marker.
736Laying of G.I. pipe 150 mm diawith clamp and nut & bolts
737Digging of trench for laying of Single circuit 33KV 3x300 sq.mm XLPE cable and making of trench for two nos cable with brick on both side, sand filling into the trench and finally trench will be covered with stone/Precast slab ("PuVVNL 33 KV HT" engraved) after laying of cable into the trench including providing and fixing cable route marker.
738Erection for Augmentation of 3 phase 33 kV line using new Insulator and hardware as per technical specification, approved drawings and scope of work
739Erection of 33 KV 70 KN polymer Disc insulator along with suitable hardware fittings
740Erection of 33 KV 10 KN Polymer Pin Insulators
741Erection, testing & commissioning of earthing as per technical specifications,approved drawings and scope of work.
7428 SWG GI Coil 115 turns (1.85 kg)
743Erection, testing & commissioning of new GI wire for earthing and guarding as per technical specification, approved drawings and scope of work.
744Erection of 6 SWG GI wire
745Erection of 8 SWG GI wire
746Erection, testing & commissioning of 33 KV line for under ground railway crossing by2 Nos (including one spare) 3Cx 300 Sqmm XLPE Armored Cable (0.3 km each) , using 150MM dia GI pipes, outdoor heat shrinkable cable jointing kits, lugs,4 NosGI 3-meters long earthing pipe, 6 SWG GI wires, cable markers, clamps, jumpering and 11 KV station type lightening arrestors(6 NOS.), etc as required as per technical specifications, approved drawings and scope of he work.
747Erection, testing & commissioning of 33 KV line for under ground highway crossing by2 Nos (including one spare) 3Cx300 Sqmm XLPE Armored Cable (0.2 km each) , using 160 mm HDPE pipe at road crossing, 150MM dia GI pipes for cable support, outdoor heat shrinkable cable jointing kits, lugs,4 NosGI 3-meters long earthing pipe, 6 SWG GI wires, 7/20 GI wire, cable markers, clamps, jumpering, 11 KV station type lightening arrestors(6 NOS.), etc as required as per technical specifications, approved drawings and scope of he work.
748Erection for new 11 KV linesas per scope of work, approved drawings and specifications:
749Excavation of pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications:
7508.5 m/180 kgs PCC Poles - (PCC Pole as per state practice)
75111 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
752Erection of following types of poles for 11 KV overhead line by installing danger plate, anti-climbing devices (barbed wire),pole numbering including cement concrete foundation using 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and specifications:
753Erection of 8.5 m/180 Kgs PCC Poles withBase stone pad(state practices of PCC pole and base plate/stone to be used)
75411 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
755Excavation of stay pit in following type of soils,as per scope of work, approved drawings and specifications:
756Normal soil
757Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator and 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
758Erection, testing and commissioning of 11 kV insulator including their hardware fittings as per technical specification, approved drawings and scope of work.
759Erection of 5 KN 11 kV Polymer Pin insulator
760Erection of 45 KN 11 kV Polymer Disc insulator with strain hardware
761Laying out, tensioning, binding of new conductor and tightening of stays and stringing, testing and commissioning of ACSRConductor of following sizes including jointing sleeves, helical formed fittings, jumpering and by providing & erecting PG Clamps etc as required as per approved drawings, scope of work and technical specifications
762Stringing of 6/2.59 + 1/2.59 mm (30 mm² Al. Area) - Weasel
763Stringing of 6/3.35 + 1/3.35 mm (50 mm² Al. Area) - Rabbit
764Stringing of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog
765Stringing of Insulated covered Conductor (50 Sqmm)
766Stinging of 11 Kv Line on 3x70 sqmm XLPE Cable
767Erection, testing & commissioning of pre-fabricated HDG steel items like V cross arm, top channel, top clamp, cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, etc made of MS Channels, MS angle, MS flats of given sizes for over head structures and HDG MS nuts, bolts & washers as per technical specification, approved drawings and scope of work.
768Providing and fixing of Danger Board IncludingMaterial and its Fabrication ,Painting ,Writing ,Logo and Scheme etc as Per RDSS Guidelines and T.S
769Earthingand guarding arrangement as per technical specifications,approved drawings and scope of work.
770Erection, testing & commissioning of Spike Earthing 20mm solid Rod
771Erection of 6 SWG GI wire for earthing and guarding
772Erection of 8 SWG GI wire for earthing and guarding
773Digging of trench for laying of double circuit 11KV 3x185 sq.mm XLPE cable and making of trench for two nos cable with brick on both side, sand filling into the trench and finally trench will be covered with stone slab /Precast slab ("PuVVNL 11 KV HT" engraved) after laying of cable into the trench including providing and fixing cable route marker.
774Laying of 3x185 Sq. mm 11KV XLPE insulated cable underground in cable trenchesand earth filling of trenches
775Erection of Heat Shrinkable Jointing Kit Outdoor for 11 KV 3x185 sq. mm XLPE Cable
776Erection of Heat Shrinkable Jointing Kit Straight throughfor 11 KV 3x185 sq. mm XLPE Cable
777laying of 110 mm dia. HDPE pipe by Horizontal drilling by HDD method as per site condition, for underground piping (trenchless)
778Laying of 11 KV 3Cx185 sq.mm XLPE Cable underground through HDPEPipe at 950 mm below the ground surface. (by HDD method) including providing and fixing cable route marker.
779Digging of trench for laying of Single circuit 11KV 3x185 sq.mm XLPE cable and making of trench for one nos cable with brick on both side, sand filling into the trench and finally trench will be covered with stone slab after laying of cable into the trench.
780Erection, testing & commissioning of 11 KV line for under ground railway crossing by2 Nos (including one spare) 3Cx185 Sqmm XLPE Armored Cable (0.3 km each) , using 150MM dia GI pipes, outdoor heat shrinkable cable jointing kits, lugs,4 NosGI 3-meters long earthing pipe, 6 SWG GI wires, cable markers, clamps, jumpering and 11 KV station type lightening arrestors(6 NOS.), etc as required as per technical specifications, approved drawings and scope of he work.
781Erection, testing & commissioning of 11 KV line for under ground highway crossing by2 Nos (including one spare) 3Cx185 Sqmm XLPE Armored Cable (0.3 km each) , using 160 mm HDPE pipe at road crossing, 150MM dia GI pipes for cable support, outdoor heat shrinkable cable jointing kits, lugs,4 NosGI 3-meters long earthing pipe, 6 SWG GI wires, 7/20 GI wire, cable markers, clamps, jumpering, 11 KV station type lightening arrestors(6 NOS.), etc as required as per technical specifications, approved drawings and scope of he work.
782Erection of Installation of new Distribution Transformer - 11/0.4 KV Three phase 25 KVA T/F
783Erection for New Distribution Transformer accessories and supports as per technical specification, approved drawings and scope of work.
784Survey, route alignment & pole spotting, preparation of survey report and uploading in the web portal after approval of Project Manager/Engineer in Charge
785Erection of following types of poles for Distribution Sub Stations by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material with and 8 SWG GI wire, red oxide & aluminium paint, pole numbering including Excavation of Pole Pit (of depth 1/6th of pole length), cement concrete foundation [For all types of Poles] using cement concreting foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) with top muffing (0.88 cmt/pole for STP Poles and 0.268 cmt/Pole for PCC Poles) etc as per scope of work, approved drawings and specifications:
786Supply of 8.5m/180 kgs PCC Poles - (PCC Pole as per state practice)
787Supply of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
788Erection, testing, commissioning of Galvanized Pre-fabricated steel items like DC cross arm, back clamps, pole clamp, DO mounting channel, transformer mounting channel, transformer clamping set, transformer belting set and GI nuts, bolts & washers including painting by red oxide & aluminium as per technical specification, approved drawings and scope of work.
789Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (1 Nos.) and Excavation of Stay Pit, 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) as per technical specifications, approved drawings and scope of works.
790Erection, testing and commissioning of 11 kV insulator including their hardware fittings as per technical specification, approved drawings and scope of work.
79111 kV Pin insulator with GI pin
79211 kV Disc insulator with strain hardware
793Erection, testing and Commissioning of 11 KV, 200 A, 3-pole AB Switch for Distribution Transformer Substation as per Technical Specification, approved Drawing & Scope of works
794Erection, testing and commissioning of 9 KV, 5 KA Distribution Class Lightening Arrester for DT as per technical specification, approved drawings and scope of work.
795Erection, testing and commissioning of 11 kV, 200 Amp 3-ph, Horn Gap fuse units (set of 3 units) along with Support Insulators, Base Channel, fuse barrel etc. complete asper technical specifications, scope of works and approved drawings
796Erection, Testing and Commissioning of Distribution Transformerwith all accessories as per scope of work, approved drawings and specifications:
79711/0.4 KV Distribution Transformer 25 KVA 3 phaseDTR
79811/0.4 KV Distribution Transformer 63 KVA 3 phaseDTR
79911/0.4 KV Distribution Transformer 100 KVA 3 phaseDTR
80011/0.4 KV Distribution Transformer 250 KVA 3 phaseDTR
801Erection, testing and Commissioning of Outdoor mounting type Distribution box made of MS sheet of thickness not less than 18 SWG CRCA sheet by deep drawn method, dust and moisture vermin, weather proof with degree of protection with suitable bus bars, Modem Compatible DLMS Compliant LT Trivector Static Meter with suitable CTs, earthing bus, earthing terminals, box illumination, front door operated with proper locking arrangement, lugs, mounting channel frame, internal wiring with FRLS cables, danger plate, numbering, back clamps, hardware as per scope of the work, technical specifications and approved drawings, direction of Engineer in Charge suitable for following transformer:
8023 Ph 25 KVA transformer 40 A TPN MCCB (incomer) and 6 Nos. 25 A SP MCCB (outgoing) with metering
8033 Ph 63 KVA Transformer having 200 A TPN isolator, 100 A HRC fuse (incomer) and 6 Nos. 60 A SP MCCB (outgoing)
8043 Ph 100 KVA Transformer having 200 A TPN isolator, 160A HRC fuse (incomer) and 6 Nos. 90 A SP MCCB (outgoing)
8053 Ph 250 KVA Transformer having 600 A TPN isolator, 315 A HRC fuse (incomer) and 9 Nos. 120 A SP MCCB (outgoing)
806Erection, testing and Commissioning of 2 Nos Spike Earthing 20x2000 mm and 1 Nos Chemical earthing 40x3000 mm , as per IS 1161, making earth grid using 6 SWG GI wire as per scope of work, approved drawings and technical specifications,
807Erection, testing and Commissioning of 1.1 KV XLPE Aluminium Conductor, Stranded, unarmoured cable for connection of transformer LV bushing to Distribution Box and Distribution box to overhead line as per Scope of work, technical specification and approved drawings:
8081CX35 sqmm aluminium conductor cable
8091Cx70 sqmm aluminium conductor cable
8101Cx150 sqmm aluminium conductor cable
8111Cx400 sqmm aluminium conductor cable
812Erection, testing and commissioning of ACSR Rabbit Conductor for jumpering including PG Clamps, bi-metallic connectors, hardware etc as per Technical Specification, approved Drawing & Scope of works
813Erection of Augmentation of existing Distribution transformeras per scope of work, approved drawings and specifications:
814Erection for augmentation of Distribution Transformers including cables, Stay & Earthing (2 Nos), with Lugs, copper L-clamp as required, bushing capsfrom 11/0.4 KV Substation/Double Pole/Plinth as per Technical Specifications, Scope of Work and Approved Drawings.
81511/0.433 kV 25kVA Distribution Transformer
81611/0.433 kV 63kVA Distribution Transformer
81711/0.433 kV 100kVA Distribution Transformer
81811/0.433 kV 250kVA Distribution Transformer
81911/0.433 kV 400kVA Distribution Transformer
820Dismantling of old existing distribution transformer & Carriage of Dismantled Distribution Transformer and other accessories to Sub centre/Workshop including loading & Unloading at both End.
82111/0.433 kV 10kVA Distribution Transformer
82211/0.433 kV 16kVA Distribution Transformer
82311/0.433 kV 25kVA Distribution Transformer
82411/0.433 kV 63kVA Distribution Transformer
82511/0.433 kV 100kVA Distribution Transformer
82611/0.433 kV 160kVA Distribution Transformer
82711/0.433 kV 250kVA Distribution Transformer
828Erection of Trolly Mounted DT as per scope of work, approved drawings and specifications:
829Erection, Testing & Commisioning of 11/0.433 kV 400 KVA Distribution Transformer in Trolley along with fabrication of trolley with fencing and locking mechanism and all fixing arrangements and accessories.
830Erection of Protection of DT as per scope of work, approved drawings and specifications:
831Installation ofAB switch for Distribution Transformer 100 KVA and above
832Installation of DO Fuse a for Distribution Transformer 100 KVA and above
833Installation of LT ACB on DTs having capacity 250 KVA and above
834Installation of LT Distribution boxfor Distribution Transformer upto 250 KVA
835Installation of LT Distribution boxfor Distribution Transformer 400 KVA and above
836Erection of DT Cable with lug and clamp as per scope of work, approved drawings and specifications:
837LT Cable of DT 1C 240 Sqmm
838LT Cable of DT 1C 400 Sqmm
839LT Cable of DT 1C 630 Sqmm
840Erection for New Circuits of LT lines with Aerial bunch XLPE cable as per scope of work, approved drawings and specifications:
841Excavation of pole pit (of depth 1/6th of pole length) in normal soil of following pole as per scope of work, approved drawings and specifications:
8428.5 m/180 Kgs PCC Poles with Base pad including Cement concreting, (state practices of PCC pole, stone to be used)
8439 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
84411 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
845Erection of following types of poles for LT overhead line with Stone pad, pole numbering by paint with cement concrete foundation using 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and specifications:
846Erection of 8.5 m/180 Kgs PCC Poles with Base pad including Cement concreting, (state practices of PCC pole, stone to be used)
8479 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
848Erection of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
849Excavation of LT stay pit in following type of soils,as per scope of work, approved drawings and specifications:
850Normal soil
851Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (1 no.) and 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
852Erection, testing & commissioning of new areal bunched XLPE cable, Fixing tension clamps for dead end, suspension clamps, clamps for neutral, piercing connectors type-I & type-II, Pre- insulated compression connectors, 16 mm dia MS nuts & bolts, pole clamps, stainless steel strap, Single and three phase pole mounted distribution board, energisation of distribution box through 2Cx25 sqmm anD 4Cx35 sq.mm XLPE cable fixing end cap etc. as required as per technical specification, approved drawings and scope of work:
853Erection of Aerial bunchedXLPE cable 1x16 sqmm+1x25 sqmm
854Erection of Aerial bunchedXLPE cable 3 X 50 sqmm+1x35 sqmm.(bare messenger wire)+1x16 sqmm.
855Erection of Aerial bunchedXLPE cable 3 X 95 sqmm.+1x70 sqmm.(Bare messenger wire)+1x16 sqmm.
856Erection of Aerial bunchedXLPE cable 3 X 120 sqmm. + 1x95 sqmm.(bare messenger wire) +1x16 sqmm.
857Erectionof Aerial bunchedXLPE cable 3 X 150 sqmm. + 1x120 sqmm.(bare messenger wire) +1x16 sqmm.
858Erection, testing & commissioning of earthing by inserting GI Earthing spike made of 20mm solid Rod as per approved drawings, scope of work and technical specifications
859Erection of 8 SWG GI wire for earthing by providing GI nut, bolts & washers, turn buckle etc as per approved drawings, scope of work and technical specifications
860Erection for Extra Circuits of LT lines with Aerial bunch XLPE cable
861Excavation of pole pit (of depth 1/6th of pole length) in normal soil of following pole as per scope of work, approved drawings and specifications:
8628.5 m/180 Kgs PCC Poles with Base pad including Cement concreting, (state practices of PCC pole, stone to be used)
8639 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
86411 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
865Erection of following types of poles for LT overhead line with Stone pad, pole numbering by paint with cement concrete foundation using 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and specifications:
866Erection of 8.5 m/180 Kgs PCC Poles with Base pad including Cement concreting, (state practices of PCC pole, stone to be used)
867Erection of 9 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
868Erection of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
869Excavation of LT stay pit in following type of soils,as per scope of work, approved drawings and specifications:
870Normal soil
871Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (1 no.) and 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
872Erection, testing & commissioning of new areal bunched XLPE cable, Fixing tension clamps for dead end, suspension clamps, clamps for neutral, piercing connectors type-I & type-II, Pre- insulated compression connectors, 16 mm dia MS nuts & bolts, pole clamps, stainless steel strap, Single and three phase pole mounted distribution board, energisation of distribution box through 2Cx25 sqmm anD 4Cx35 sq.mm XLPE cable fixing end cap etc. as required as per technical specification, approved drawings and scope of work:
873Erection of Aerial bunchedXLPE cable 3 X 50 sqmm+1x35 sqmm.(bare messenger wire)+1x16 sqmm.
874Erection of Aerial bunchedXLPE cable 3 X 95 sqmm.+1x70 sqmm.(Bare messenger wire)+1x16 sqmm.
875Erection of Aerial bunchedXLPE cable 3 X 120 sqmm. + 1x95 sqmm.(bare messenger wire) +1x16 sqmm.
876Erectionof Aerial bunchedXLPE cable 3 X 150 sqmm. + 1x120 sqmm.(bare messenger wire) +1x16 sqmm.
877Erection, testing & commissioning of earthing by inserting GI Earthing spike made of 20mm solid Rod as per approved drawings, scope of work and technical specifications
878Erection of 8 SWG GI wire for earthing by providing GI nut, bolts & washers, turn buckle etc as per approved drawings, scope of work and technical specifications
879Erection for Augmentation of LT lines with Aerial bunch XLPE cable
880Excavation of additional pole pit (of depth 1/6th of pole length) in normal soil of following pole as per scope of work, approved drawings and specifications:
8818.5 m/180 Kgs PCC Poles with Base pad including Cement concreting, (state practices of PCC pole, stone to be used)
8829 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
883Erection of following types of poles for LT overhead line with Stone pad, pole numbering by paint with cement concrete foundation using 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and specifications:
884Erection of 8.5 m/180 Kgs PCC Poles with Base pad including Cement concreting, (state practices of PCC pole, stone to be used)
885Erection of 9 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
886Excavation of LT stay pit in following type of soils,as per scope of work, approved drawings and specifications:
887Normal soil
888Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (1 no.) and 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
889Erection, testing & commissioning of new areal bunched XLPE cable, Fixing tension clamps for dead end, suspension clamps, clamps for neutral, piercing connectors type-I & type-II, Pre- insulated compression connectors, 16 mm dia MS nuts & bolts, pole clamps, stainless steel strap, Single and three phase pole mounted distribution board, energisation of distribution box through 2Cx25 sqmm anD 4Cx35 sq.mm XLPE cable fixing end cap etc. as required as per technical specification, approved drawings and scope of work:
890Erection of Aerial bunchedXLPE cable 3 X 95 sqmm.+1x70 sqmm.(Bare messenger wire)+1x16 sqmm.
891Erection of Aerial bunchedXLPE cable 3 X 120 sqmm. + 1x95 sqmm.(bare messenger wire) +1x16 sqmm.
892Erection, testing & commissioning of earthing by inserting GI Earthing spike made of 20mm solid Rod as per approved drawings, scope of work and technical specifications
893Erection of 8 SWG GI wire for earthing by providing GI nut, bolts & washers, turn buckle etc as per approved drawings, scope of work and technical specifications
894Erection of Feeder Bifurcation (33KV Line)
8959m/400 kgs PCC Poles (PCC pole as per state practice)
89613 m longSTP SP72
89711 m long steel tubular poles with welded steel base plate of designation 540 SP 55 (As per IS: 2713 , pt. I,II,III)
898Concreting of poles as per specification
899Stone Pad
900Pre fabricated Steel items including MS nuts, bolts with washer as per technical specification, approved drawings and scope of work,X arm angle 100x50x6 mm V-type 33 KV (18 nos /km), Cross Arm holding clamps with nuts & bolts(18 nos /km), F bracket for fitting Top insulator with nuts & bolts(18 nos /km), Channel Cross arms 125x65x3180 mm ( Top Channel)(1 nos /km), Angle Iron 65x65x6 mm 3180 mm long bracing set with nuts & bolts(1 nos /km), Clamp with nuts & bolts for Top channel(2 nos /km), E- bracket with nuts & bolts(3 nos /km) including MS nuts, bolts with washer as per technical specification, approved drawings and scope of work.
901Danger Board with barbed wire including jumpher
902Number Plate
903Stay Set ( Galvanised) GI stay rod 20x1800 mm, stay wire 7/8 SWG GI wire, 50x8 mm stay clamp, stay insulator (2 nos.), anchor plate (300x300x8), nut bolts, 2 nos. turn buckles, 1.8 m long 20 mm dia. Solid GI Stay Rod, 7/4.0mm dia. GI stranded wire
904Insulator and hardware as per technical specification, approved drawings and scope of work
90533 KV polymer Disc insulator 70 KNB&S along with suitable hardware fittings
90633 KV polymer Pin insulators with GI Pin & nuts
907GI earthing Spike earthing 20x2500 mm solid rod & 6 SWG earthwire with nut and bolt
9086 SWGand 8 SWG GI wire, GI nuts, bolts & washers for guarding angle 2180 mm long 75x75x6 (Approx. 3 span per km.)
909ACSR conductors of following sizes with jointing sleeves, binding materials,pG clamps, bi-metallic clamp, hardware etc for overhead line and jumpers as required as per technical specification,approved drawings and scope of work:
9106/4.72 + 7/1.57 mm (100 mm2 Al.area ) - Dog
911Erection of 33 KV Lineunderground railway crossing ensuring statutory clearances as required as per technical specification, approved drawings and scope of work
912Erection, testing & commissioning of 33 KV under ground railway crossing by2 Nos (including one spare) 3Cx 300 Sqmm XLPE Armored Cable (0.3 km each) , using 150MM dia GI pipes, outdoor heat shrinkable cable jointing kits, lugs,4 NosGI 3-meters long earthing pipe, 6 SWG GI wires, cable markers, clamps, jumpering and 11 KV station type lightening arrestors(6 NOS.), etc as required as per technical specifications, approved drawings and scope of he work.
913Erection for Feeder Bifurcation of 3 phase 11 kV line using additional supports matching with length and type of existing support asper technical specifications, scope of works and approved drawings
914Excavation of additional pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications:
9158.5 m/180 kgs PCC Poles - (PCC Pole as per state practice)
91611 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
917Erection of following types of poles for 11 KV overhead line by installing danger plate, anti-climbing devices (barbed wire),pole numbering including cement concrete foundation using 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and specifications:
918Erection of 8.5 m/180 Kgs PCC Poles withBase stone pad(state practices of PCC pole and base plate/stone to be used)
91911 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
920Excavation of stay pit in following type of soils,as per scope of work, approved drawings and specifications:
921Normal soil
922Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator and 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
923Erection, testing and commissioning of 11 kV insulator including their hardware fittings as per technical specification, approved drawings and scope of work.
924Erection of 5 KN 11 kV Polymer Pin insulator
925Erection of 45 KN 11 kV Polymer Disc insulator with strain hardware
926Laying out, tensioning, binding of new conductor and tightening of stays and stringing, testing and commissioning of ACSRConductor of following sizes including jointing sleeves, helical formed fittings, jumpering and by providing & erecting PG Clamps etc as required as per approved drawings, scope of work and technical specifications
927Stringing of 6/2.59 + 1/2.59 mm (30 mm² Al. Area) - Weaselconductor
928Stringing of 6/3.35 + 1/3.35 mm (50 mm² Al. Area) - Rabbitconductor
929Stringing of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dogconductor 8.5 Mtr 180 Kg PCC
930Stringing of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dogconductor 11 Mtr STP
931Erection, testing & commissioning of pre-fabricated HDG steel items like V cross arm, top channel, top clamp, cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, etc made of MS Channels, MS angle, MS flats of given sizes for over head structures and HDG MS nuts, bolts & washers as per technical specification, approved drawings and scope of work.
932Providing and fixing of Danger Board IncludingMaterial and its Fabrication ,Painting ,Writing ,Logo and Scheme etc as Per RDSS Guidelines and T.S
933Earthingand guarding arrangement as per technical specifications,approved drawings and scope of work.
934Erection, testing & commissioning of Spike Earthing 20mm solid Rod
935Erection of 6 SWG GI wire for earthing and guarding
936Erection of 8 SWG GI wire for earthing and guarding
937Erection, testing & commissioning of 11 KV line for under ground railway crossing by2 Nos (including one spare) 3Cx185 Sqmm XLPE Armored Cable (0.3 km each) , using 150MM dia GI pipes, outdoor heat shrinkable cable jointing kits, lugs,4 NosGI 3-meters long earthing pipe, 6 SWG GI wires, cable markers, clamps, jumpering and 11 KV station type lightening arrestors(6 NOS.), etc as required as per technical specifications, approved drawings and scope of he work.
938Erection of 12 kV, 1250 A, 25kA for 3 seconds, 3-ph, indoor typeVacuum Circuit breaker with adopter panel for out going feeder by leveling, alignment and welding on existing cable trench in control room. Testing & commissioning of indoor VCB panel including 3 Nos indoor type Current Transformer,A-meter, volt-meter, Relay & accessories protection as per approved drawings, technical specifications and scope of the work.:
939Providing and fixing of Sign Board IncludingMaterial and its Fabrication ,Painting ,Writing ,Logo and Scheme etc as Per RDSS Guidelines and T.S
940Laying, erection, termination using indoor & outdoor termination kit, 11KV 3x 185 sqmm XLPEarmored Power cablesas per technical specifications, approved drawings and scope of works. :
941Erection of 11KVAgriculture Feeder Splitting due to overloading
942Excavation of pole pit (of depth 1/6th of pole length) in normal soil of following pole as per scope of work, approved drawings and specifications:
9438.5 m/180 Kgs PCC Poles with Base pad including Cement concreting, (state practices of PCC pole, stone to be used)
944Erection of following types of poles for LT overhead line with Stone pad, pole numbering by paint with cement concrete foundation using 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and specifications:
945Erection of 8.5 m/180 Kgs PCC Poles with Base pad including Cement concreting, (state practices of PCC pole, stone to be used)
946Excavation of LT stay pit in following type of soils,as per scope of work, approved drawings and specifications:
947Normal soil
948Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (1 no.) and 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
949Erection, testing & commissioning of new areal bunched XLPE cable, Fixing tension clamps for dead end, suspension clamps, clamps for neutral, piercing connectors type-I & type-II, Pre- insulated compression connectors, 16 mm dia MS nuts & bolts, pole clamps, stainless steel strap, Single and three phase pole mounted distribution board, energisation of distribution box through 2Cx25 sqmm anD 4Cx35 sq.mm XLPE cable fixing end cap etc. as required as per technical specification, approved drawings and scope of work:
950Erection of LT line on 8.5 mtr PCC pole with AB cable (3x50+1x35+1x16)
951Erection, testing & commissioning of earthing by inserting GI Earthing spike made of 20mm solid Rod as per approved drawings, scope of work and technical specifications
952Erection of 8 SWG GI wire for earthing by providing GI nut, bolts & washers, turn buckle etc as per approved drawings, scope of work and technical specifications
953Erection of 6 SWG GI wire for earthing by providing GI nut, bolts & washers, turn buckle etc as per approved drawings, scope of work and technical specifications
954Erection for New Distribution Transformer accessories and supports as per technical specification, approved drawings and scope of work.
955Survey, route alignment & pole spotting, preparation of survey report and uploading in the web portal after approval of Project Manager/Engineer in Charge
956Erection of following types of poles for Distribution Sub Stations by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material with and 8 SWG GI wire, red oxide & aluminium paint, pole numbering including Excavation of Pole Pit (of depth 1/6th of pole length), cement concrete foundation [For all types of Poles] using cement concreting foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) with top muffing (0.88 cmt/pole for STP Poles and 0.268 cmt/Pole for PCC Poles) etc as per scope of work, approved drawings and specifications:
957Supply of 8.5m/180 kgs PCC Poles - (PCC Pole as per state practice)
958Erection, testing, commissioning of Galvanized Pre-fabricated steel items like DC cross arm, back clamps, pole clamp, DO mounting channel, transformer mounting channel, transformer clamping set, transformer belting set and GI nuts, bolts & washers including painting by red oxide & aluminium as per technical specification, approved drawings and scope of work.
959Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (1 Nos.) and Excavation of Stay Pit, 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) as per technical specifications, approved drawings and scope of works.
960Erection, testing and commissioning of 11 kV insulator including their hardware fittings as per technical specification, approved drawings and scope of work.
96111 kV Polymer Pin insulator with GI pin
96211 kV Polymer Disc insulator with strain hardware
963Erection, testing and Commissioning of 11 KV, 200 A, 3-pole AB Switch for Distribution Transformer Substation as per Technical Specification, approved Drawing & Scope of works
964Erection, testing and commissioning of 9 KV, 5 KA Distribution Class Lightening Arrester for DT as per technical specification, approved drawings and scope of work.
965Erection, testing and commissioning of 11 kV, 200 Amp 3-ph, Horn Gap fuse units (set of 3 units) along with Support Insulators, Base Channel, fuse barrel etc. complete asper technical specifications, scope of works and approved drawings
966Erection, Testing and Commissioning of Distribution Transformerwith all accessories as per scope of work, approved drawings and specifications:
96711/0.4 KV Distribution Transformer 25 KVA 3 phaseDTR
968Erection, testing and Commissioning of Outdoor mounting type Distribution box made of MS sheet of thickness not less than 18 SWG CRCA sheet by deep drawn method, dust and moisture vermin, weather proof with degree of protection with suitable bus bars, Modem Compatible DLMS Compliant LT Trivector Static Meter with suitable CTs, earthing bus, earthing terminals, box illumination, front door operated with proper locking arrangement, lugs, mounting channel frame, internal wiring with FRLS cables, danger plate, numbering, back clamps, hardware as per scope of the work, technical specifications and approved drawings, direction of Engineer in Charge suitable for following transformer:
9693 Ph 25 KVA transformer 40 A TPN MCCB (incomer) and 6 Nos. 25 A SP MCCB (outgoing) with metering
970Erection, testing and Commissioning of 2 Nos Spike Earthing 20x2000 mm and 1 Nos Chemical earthing 40x3000 mm , as per IS 1161, making earth grid using 6 SWG GI wire as per scope of work, approved drawings and technical specifications,
971Erection, testing and Commissioning of 1.1 KV XLPE Aluminium Conductor, Stranded, unarmoured cable for connection of transformer LV bushing to Distribution Box and Distribution box to overhead line as per Scope of work, technical specification and approved drawings:
9721CX35 sqmm aluminium conductor cable
973Erection, testing and commissioning of ACSR Rabbit Conductor for jumpering including PG Clamps, bi-metallic connectors, hardware etc as per Technical Specification, approved Drawing & Scope of works
974Erection for Augmentation/Reconductoring of 33 KV Line (Older Than 25 Years)
975Excavation ofpole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications:
976Erection of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
977Erection of 9 m PCC Poles - (PCC Pole as per state practice)
978Erection of following types of additional poles matching with existing line supports by installing danger plate, anti-climbing devices (barbed wire), Painting with red oxide & aluminum paint including paint, pole numbering including cement concrete foundation using 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and specifications:
979Erection of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
980Erection of 9 PCC Poles with Base pad including Cement concreting, (state practices of PCC pole, stone to be used) 0.268 cum Cement concreting+0.014 cmt (Muffing)
981Excavation of stay pit for 33 KV Stay in following type of soils,as per scope of work, approved drawings and specifications:
982Normal soil
983Erection of complete stay set with GI stay wire (7x4.00 mm dia), binding of stay wire, by providing Guy stay insulator and 0.3 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
984Erection, testing & commissioning of new Pre-fabricated HDG steel items like V cross arm, top clamp, cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, etc made of MS Channels, MS angle, MS flats of given sizes for over head structures as per technical specification, approved drawings and scope of work.
985Dismantling of existing overhead line conductor and fittings, depositing the dismantled material to employer"s store and laying out & stringing of new ACSR conductor of following sizes by providing jointing sleeves, binding wire & tape & helical formed fittings etc as required as per technical specification, approved drawings and scope of work.
986Stringing of 30/3.00 + 7/3.00 mm (200 mm² Al. Area) - Panther replacing existing conductor
987Erection for Augmentation of 3 phase 33 kV line using new Insulator and hardware as per technical specification, approved drawings and scope of work
988Erection of 33 KV 70 KN polymer Disc insulator along with suitable hardware fittings
989Erection of 33 KV 10 KN Polymer Pin Insulators
990Erection, testing & commissioning of earthing as per technical specifications,approved drawings and scope of work.
9918 SWG GI Coil 115 turns (1.85 kg)
992Erection, testing & commissioning of new GI wire for earthing and guarding as per technical specification, approved drawings and scope of work.
993Erection of 6 SWG GI wire
994Erection of 8 SWG GI wire
995Erection for Augmentation/Reconductoring of 11 KV Line (Older Than 25 Years) asper technical specifications, scope of works and approved drawings
996Excavation of additional pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications:
9978.5 m/180 kgs PCC Poles - (PCC Pole as per state practice)
998Erection of following types of poles for 11 KV overhead line by installing danger plate, anti-climbing devices (barbed wire),pole numbering including cement concrete foundation using 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and specifications:
999Erection of 8.5 m/180 Kgs PCC Poles withBase stone pad(state practices of PCC pole and base plate/stone to be used)
1000Excavation of stay pit in following type of soils,as per scope of work, approved drawings and specifications:
1001Normal soil
1002Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator and 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
1003Erection, testing and commissioning of 11 kV insulator including their hardware fittings as per technical specification, approved drawings and scope of work.
1004Erection of 5 KN 11 kV Polymer Pin insulator
1005Erection of 45 KN 11 kV Polymer Disc insulator with strain hardware
1006Laying out, tensioning, binding of new conductor and tightening of stays and stringing, testing and commissioning of ACSRConductor of following sizes including jointing sleeves, helical formed fittings, jumpering and by providing & erecting PG Clamps etc as required as per approved drawings, scope of work and technical specifications
1007Stringing of 6/3.35 + 1/3.35 mm (50 mm² Al. Area) - Rabbit by replacing existing weasel/squirrel conductor
1008Stringing of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog by replacing existing racoon/rabbit conductor
1009Erection, testing & commissioning of pre-fabricated HDG steel items like V cross arm, top channel, top clamp, cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, etc made of MS Channels, MS angle, MS flats of given sizes for over head structures and HDG MS nuts, bolts & washers as per technical specification, approved drawings and scope of work.
1010Providing and fixing of Danger Board IncludingMaterial and its Fabrication ,Painting ,Writing ,Logo and Scheme etc as Per RDSS Guidelines and T.S
1011Earthingand guarding arrangement as per technical specifications,approved drawings and scope of work.
1012Erection, testing & commissioning of Spike Earthing 20mm solid Rod
1013Erection of 6 SWG GI wire for earthing and guarding
1014Erection of 8 SWG GI wire for earthing and guarding
1015Erection of Automatic Capacitor Bank as per Technical specifications, Approved drawings & Scope of work.
1016Erection, testing and commissioning of 12.65 kV, 1980 kVAr, 3-Phase, 50 C/s, Outdoor Type , Capacitor bank having two variable step of 792 Kvar & one Variable steps of 396 kVAr. Bank shall be complete with Capacitor units of 264/132 kVAr,Aluminium busbars, Pin & Post insulators, Expulsion fuses etc.(1.98 MVAr HT Capacitor bank) including capacitors, reactors, Vaccumm Capacitors switches, allied materials such as suitable size of aluminium busbars, Pin/Post insulators, Expulsion fuses etc.
1017Erection, testing and commissioning of 12.65 kV, 3960 kVAr, 3-Phase, 50 C/shoused in Outdoor Type CRCA Panel, Capacitor bank having two variable step of 792 Kvar & two Variable steps of 1188 kVAr. Bank shall be complete with Capacitor units of 396/264 kVAr,Aluminium busbars, Pin & Post insulators, HRC fuses,Surge arrestor etc.including structure for complete equipments (3.96 MVAr HT Capacitor bank)including capacitors, reactors, Vaccumm Capacitors switches, allied materials such as suitable size of aluminium busbars, Pin/Post insulators, Expulsion fuses etc.
1018Casting of Civil foundation(1.98 MVAr HT Capacitor bank)
1019Cable trench for laying of power/control cables.(1.98 MVAr HT Capacitor bank)
1020Casting of Civil foundation(3.96 MVAr HT Capacitor bank)
1021Cable trench for laying of power/control cables.(3.96 MVAr HT Capacitor bank)
1022Erection for earthing of existing substation and Distribution Transformer
1023Erection, testing and Commissioning Spike Earthing 20x2000 mm, using 8 SWG GI wire as per scope of work, approved drawings and technical specifications,
1024Erection, testing and Commissioning Pipe Earthing 40x3000 mm, using 8 SWG GI wire as per scope of work, approved drawings and technical specifications,
1025Erection works for Renovation and modernization of existing substation, battery charger and battery set.
1026Design, Engineering, erection, testing and commissioning of 24V, 150 AHPb(Lead) Acid battery, battery standmade of teakwood duly painted with anti acid resistive paint, battery insulators, inter-battery wiring using 30 sqm, 1.1 kv, copper single coremulti strand cable, terminal connectors, Rubber mats & all other accessories and connectors as per technical specifications.
1027Design, Engineering, erection, testing and commissioning of 24V, 150 AH.Float-cum-Boost Battery Charger with full wave rectification for230V,1 phase, 50 Hz AC Input Supply as per technical specifications.
1028Design, Engineering and construction of foundation , erection, testing and commissioning of 36kV, 1250A,25kA for 3 seconds, 3-ph, Outdoor typeVacuum Circuit breaker with marshalling box etc Complete in all respect along with support structure.
1029Design, Engineering and construction of foundation , erection, testing and commissioning of 36kV, 1-Phase, 25kA/3 seconds,800-400-200/1-1-1 Amps ( having 3 secondery, core), 1 set = 3 Nos outdoortype Current Transformers along with junction box (1 no junction box for 3 no of 1-phase CTs), as required as per technical specifications complete in all respect.
1030Design, Engineering and construction of foundation , erection, testing and commissioning of 36kV, 1-Phase, 25kA/3 seconds,33 Kv/110 V single core outdoortype Potential Transformers along with junction box, as required as per technical specifications complete in all respect.
1031Design, Engineering and construction of foundation , erection, testing and commissioning of 30 kV, 10kA, 1-ph Station Class Lightening Arrester complete(1 set= 3 Nos.)
1032Design, Engineering and construction of foundation , erection, testing and commissioning of 36kV, 800A, 25kA , 3-ph double break center rotating type (DBCR), Gang Operated,isolator alongwith Support Insulators, OperatingMechanism, Base Channel down Pipe and all required accessories complete as per Technical Specifications. (with Earth Switch)
1033Design, Engineering and construction of foundation , erection, testing and commissioning of 33 kV feeder Panel (without diffirential relays) with arrangements for DLMS(modem compactible ) Trivector Static Energy Meter complete
1034Design, Engineering and construction of foundation , erection, testing and commissioning of 12 kV, 1250 A, 25kAfor 3 seconds, 3-ph, indoor typeVacuum Circuit BreakerforIncomer along with 12 kV, 1-Phase, 25kA, 600-300/5-5 A, 3 Nos indoor type Current Transformer 3 Core, Potential Transformer 11KV/110 V, indoor mounting type control panel for incoming breaker and required accessories, A-meter, volt-meter, 3-phase , withDLMS(modem compactible ) Tri Vector energy meter, Numerical Relays & accessories complete as per specifications for transformer breaker protectionwith earth fault, overcurrent .
1035Design, Engineering and construction of foundation , erection, testing and commissioning of 12 kV, 1250 A, 25kAfor 3 seconds, 3-ph, indoor typeVacuum Circuit Breakerforalong with 12 kV, 1-Phase, 25kA, 600-300/5-5 A,3 Nos indoor type Current Transformer, control panel for Bus couplar and required accessories, A-meter, Numerical Relays & accessories complete as per specifications for Bus Coupler protectionwith earth fault, overcurrent .
1036Design, Engineering and construction of foundation , erection, testing and commissioning of 12 KV 3 Ph 1250 A, 25kAfor 3 seconds, 3-ph, indoor typeVacuum Circuitbreaker along with 12 kV, 1-Phase, 25kA, 11 kv/110v,indoor type PotentialTransformer,indoor mounting type control panel and required accessories, A-meter, Numerical Relay & accessories complete as perspecifications for feeder breaker protection & Protection for Earth fault and over current) with extensible arrangement for future
1037Design, Engineering and construction of foundation , erection, testing and commissioning of 9kV, 10kA, 1-ph Station Class LighteningArrester complete (1 Set = 3 Nos.)
1038Design, Engineering and construction of foundation , erection, testing and commissioning of 12kV, 630 A, 25kA for 3 seconds, 3-ph double break center rotating type (DBCR), Gang Operated,isolator along with Support Insulators, Operating Mechanism, Base Channel down Pipe and all required accessories complete as per technical specifications, scope of works and approved drawings .
1039Design, Engineering and construction of foundation , erection, testing and commissioning of 11 kv Bus-Coupler with all required accessories complete as per technical specifications, scope of works and approved drawings .
1040Supply of 3CX300 Sqmm 33 KV XLPE Armored Cable
1041Erection, testing & commissioning of 33 KVunder ground Cable in underground by2 Nos (including one spare) 3Cx300 Sqmm XLPE Armored Cable, using 160 mm HDPE pipe at road crossing, 150mm dia GI pipes for cable support, outdoor heat shrinkable cable jointing kits, lugs, cable markers, clamps, jumpering, 7/20 GI wire etc as required as per technical specifications, approved drawings and scope of he work.
1042Supply of 3Cx185 Sqmm 11 KV XLPE Armored Cable
1043Erection, testing & commissioning of 11 KV line for under ground cabling in underground by2 Nos (including one spare) 3Cx185 Sqmm XLPE Armored Cable, using 150MM dia GI pipes, outdoor heat shrinkable cable jointing kits, lugs,4 NosGI 3-meters long earthing pipe, 6 SWG GI wires, cable markers, clamps, jumpering and 11 KV station type lightening arrestors(6 NOS.), etc as required as per technical specifications, approved drawings and scope of the work.
1044Civil Worksfor Control room extension, Strengthning and Miscellaneous Works required as per Scope of work, Approved drawings and Technical Specifications.
1045Control Room Extension Works
1046Erection of 12 kV, 1250 A, 25kA for 3 seconds, 3-ph, indoor typeVacuum Circuit breaker with adopter panel for out going feeder by leveling, alignment and welding on existing cable trench in control room. Testing & commissioning of indoor VCB panel including 3 Nos indoor type Current Transformer,A-meter, volt-meter, Relay & accessories protection as per approved drawings, technical specifications and scope of the work.:
1047Erection including Providing and fixing of Sign Board IncludingMaterial and its Fabrication ,Painting ,Writing ,Logo etc as Per RDSS Guidelines and T.S
1048Laying, erection, termination using indoor & outdoor termination kit, 11KV 3x 185 sqmm XLPEarmored Power cablesas per technical specifications, approved drawings and scope of works. :
1049Old Conrol Room Strengthning & Miscellaneous Construction Works required as per Scope of work, Approved Drawings and Technical Specifications
1050Old Control room building strengthning (4 No"s), Construction of boundary wall (200 mtr for each substation) (5 Nos) & Construction of Firewall (4 No"s) as per Scope of work, approved drawings and Technical specifications.
1051Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
1052Of area 3 sq. metres and below
1053Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
1054Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
1055Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
1056Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
1057In cement mortar
1058Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
1059For thickness of tiles 10 mm to 25 mm
1060Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :
106115 mm to 40 mm nominal bore
1062Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
1063TILES WORK
1064Erection including Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
1065Size of Tile 800x800 mm
1066Erection including Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shadecomplete.
1067Erection including Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
1068Glazed Vitrified tiles Matt/Antiskid finish of size
1069Size of Tile 600 x 600 mm
1070PLASTERING & PAINTING
107112 mm cement plaster of mix :
10721:4 (1 cement: 4 fine sand)
1073Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
1074Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.
1075With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
1076Distempering with 1st quality acrylic distember (Ready mix) nhaving VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :
1077Old work (one or more coats)
1078Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
1079New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
1080Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
1081Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
1082PLINTH & BRICK WORK
1083Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
1084Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
1085CONCRETE WORK
1086Erection Including Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
10871:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
1088Erection Including Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
1089100 mm nominal inner dia Pipes
1090Erection of DT Capacitors atDTs
1091Erection, Testing & Commissioning offollowing 440 Volt LT shunt Capacitor including mounting Structure and accessories as required as per technical specifications,approved drawings and scope of work.
1092Erection of LT Shunt capacitor 440 Volt 10 KVAr 3Phase 50Hz IP65
1093Erection of LT Shunt capacitor 440 Volt 25 KVAr 3Phase 50Hz IP65
1094Erection for Armoured Cabling
1095Excavation of pole pit (of depth 1/6th of pole length) in normal soil of following pole as per scope of work, approved drawings and specifications:
10968.5 m/180 Kgs PCC Poles with Base pad including Cement concreting 0.268 Cum, (state practices of PCC pole, stone to be used)
10979 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
1098Erection of following types of poles for LT overhead line with Stone pad, pole numbering by paint with cement concrete foundation using 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and specifications:
1099Erection of 8.5 m/180 Kgs PCC Poles with Base pad including Cement concreting, (state practices of PCC pole, stone to be used)
11009 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
1101Excavation of LT stay pit in following type of soils,as per scope of work, approved drawings and specifications:
1102Normal soil
1103Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (1 no.) and 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
1104Erection, testing & commissioning of new single core armoured XLPE cable, Fixing of cross arm, piercing connectors, Pre- insulated compression connectors, MS nuts & bolts, pole clamps, insulation mastic tape, Single and three phase pole mounted distribution board, energisation of distribution box through armoured XLPE cable fixing end cap etc. as required as per technical specification, approved drawings and scope of work:
11051.1 kV Single Core 25sqmm XLPE armoured cable (1Cx25 sqmm)
11061.1 kV Single Core 50sqmm XLPE armoured cable (1Cx50 sqmm)
11071.1 kV Single Core 95sqmm XLPE armoured cable (1Cx95 sqmm)
11081.1 kV Single Core 120sqmm XLPE armoured cable (1Cx120 sqmm)
1109Erection, testing & commissioning of earthing by inserting GI Earthing spike made of 20mm solid Rod as per approved drawings, scope of work and technical specifications
1110Erection of 8 SWG GI wire for earthing by providing GI nut, bolts & washers, turn buckle etc as per approved drawings, scope of work and technical specifications
1111Discount offered in %
1112Words Final Quoted Price after Discount
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail