}

Work Of Strengthening Of Existing Circuits (0.4/0. 23 Kv) By Developing New Lt Sections For Balancing The Distribution Transformers Operating Under The Distribution Areas Of Kaushambi End Under Kaushambi Electricity Distribution Board., kaushambi-Uttar Pradesh

Purvanchal Vidyut Vitaran Nigam Limited has published Work Of Strengthening Of Existing Circuits (0.4/0. 23 Kv) By Developing New Lt Sections For Balancing The Distribution Transformers Operating Under The Distribution Areas Of Kaushambi End Under Kaushambi Electricity Distribution Board.. Submission Date for this Tender is 06-04-2024. Distribution Board Tenders in kaushambi Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

43083938
Work Of Strengthening Of Existing Circuits (0.4/0. 23 Kv) By Developing New Lt Sections For Balancing The Distribution Transformers Operating Under The Distribution Areas Of Kaushambi End Under Kaushambi Electricity Distribution Board.
Open Tender
Indian
Uttar Pradesh
kaushambi
06-04-2024

Tender Details

Work Of Strengthening Of Existing Circuits ( 0.4 / 0. 23 Kv ) By Developing New Lt Sections For Balancing The Distribution Transformers Operating Under The Distribution Areas Of Kaushambi End Under Kaushambi Electricity Distribution Board.

Key Value

Document Fees
INR 1180 /-
EMD
INR 2000.0 /-
Tender Value
INR 1.03 Lakhs /-

BOQ Items

dk;Z dk fooj.k% fo|qr forj.k e.My dkS"kkEch ds vUrZxr dkS"kkEch [k.M ds forj.k {ks=ksa ds vUrZxr ifjpkfyr forj.k ifjorZdksa ds lUrqyhdj.k gsrq u;s ,y0Vh0 lsDlu fodflr djrs gq;s orZeku lfdZVksa ¼0-4@0-23 ds0oh0½ ds lqn`<+hdj.k dk dk;ZA
Sl. No. Item Description
1Loading, unloading and safe carriage of following materials from Store Centre, Manjhanpur to JE dump Store and JE dump Store to work site with proper stacking
2PCC Pole 8.5 Mtr
3St Pole
4ACSR Weasel Conductor
5T off Channel
6Top Channel
7Stay Complete
811 KV Pin insulator with pin
94.5 KG Disc insulator with fitting
10Earthing complete
1111 kv V type steel cross arm
12Supply of following material/fitting complete in all respect :-
13Stone Pad
14X arm holding clamp
15F clamp with nut bolt
16Danger Board
17T off Channel clamp
18Clamp for top and dropper
19Concreting of poles
20Nut & Bolt
21Birbed wire
22The excavation of 1 No foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of Single PCC/ST Pole with fixing of necessary clamps & accessories as per required (if required). All required materials such as Holding clamp/STP clamp, Nuts & Bolts off size etc will be provided by the contractor. Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor). Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that No rainwater gets accumulated on the top. All work will be done as per RESPO Norms & relevent IS Specification.
23Laying, stringing, sagging, binding and jumpering of ACSR Weasel conductor for LT/HT Line with fixing of LT Clamps/other clamps, Shackle insulator and nuts&bolts off size as per required
24Earthing of Pole by MS earthing Rod & 6 SWG earthing Wire as per RESPO Norms.
25Erection and grouting of stay in CC ratio 1:4:8 of Cement, Sand and Stone Ballast including cost of grouting material with nozelling and binding of stay wire (Complete work)
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail