Purvanchal Vidyut Vitaran Nigam Limited has published Tender For By Developing New Lt Sections For Balancing The Distribution Transformers Operating Under The Distribution Areas Of Chail End Under Electricity Distribution Board Kaushambi, The Existing Circuits (0.4/0.23 Work Of Improvement Of Kv).. Submission Date for this Tender is 15-04-2024. Distribution Board Tenders in kaushambi Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 06-Apr-2024 | Date Extention I | Date | 08-04-2024 |
2 | 08-Apr-2024 | Date Extention II | Date | 12-04-2024 |
3 | 12-Apr-2024 | T082_Date Extention II | Date | 15-04-2024 |
Sl. No. | Item Description |
1 | Loading, unloading and safe carriage of following materials from Store Centre, Manjhanpur to JE dump Store and JE dump Store to work site with proper stacking |
2 | PCC Pole 8.5 Mtr |
3 | St Pole |
4 | ACSR Weasel Conductor |
5 | XLPE Cable 3*120 mm |
6 | T off Channel |
7 | Top Channel |
8 | Stay Complete |
9 | 11 KV Pin insulator with pin |
10 | 4.5 KG Disc insulator with fitting |
11 | Earthing complete |
12 | 11 kv V type steel cross arm |
13 | 11 KV VCB O/G CTR 400/200/5A |
14 | Outdoor cable Box 3*185 mm |
15 | Cross Bracing |
16 | Supply of following material/fitting complete in all respect :- |
17 | Stone Pad |
18 | X arm holding clamp |
19 | F clamp with nut bolt |
20 | Danger Board |
21 | T off Channel clamp |
22 | Concreting of poles |
23 | Nut & Bolt |
24 | Birbed wire |
25 | The excavation of 1 No foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of Single PCC/ST Pole with fixing of necessary clamps & accessories as per required (if required). All required materials such as Holding clamp/STP clamp, Nuts & Bolts off size etc will be provided by the contractor. Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor). Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that No rainwater gets accumulated on the top. All work will be done as per RESPO Norms & relevent IS Specification. |
26 | Laying, stringing, sagging, binding and jumpering of ACSR Weasel conductor for LT/HT Line with fixing of LT Clamps/other clamps, Shackle insulator and nuts&bolts off size as per required |
27 | Laying, stringing, sagging, binding and jumpering of XLPE CABLE conductor for LT/HT Line with fixing of LT Clamps/other clamps, Shackle insulator and nuts&bolts off size as per required |
28 | Earthing of Pole by MS earthing Rod & 6 SWG earthing Wire as per RESPO Norms. |
29 | Erection and grouting of stay in CC ratio 1:4:8 of Cement, Sand and Stone Ballast including cost of grouting material with nozelling and binding of stay wire (Complete work) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail