Jharkhand Industrial Infrastructure Development Corporation Limited has published Tender For Repair And Maintenance Work Of Dic Building Pakur Jharkhand Including Construction Of Boundary Wall And Other Civil Components Of Works.. Submission Date for this Tender is 22-04-2024. Wall Construction Tenders in pakur Jharkhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 09-Apr-2024 | Corrigendum 1 | Other | 22-04-2024 |
| Sl. No. | Item Description |
| 1 | Providing P.C.C M-200 with nominal mix (1:1.5:3) at over the roof slabwith approved quality of stone chips 20 mm to 6 mm graded and clean coarse sand of FM 2.5 to 3 including screening shuttering mixing cement concrete in cement mixer and add Liquid intergral water proofing compound in Concrete or plaster as per manufacture specification and as per direction of E/I.Brand-Sika Plastocreate plus, MYK proof WP 10, Fosroc-Conplastx4211C, Dr. fixit Pidiproof LW+ or Equivalent & placing in position , vibrating, striking, curing. royalty and taxes all complete job as per building specification and direction of E/I. |
| 2 | Providing 6 mm Thk. cement plaster(1:4) in ceiling with clean coarse sand of FM-1.5including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all completeas per building specification and direction of E/I Under Kitchen Slab |
| 3 | Providing 1.5 mm cement punning includind curring,carriage of water with all leads and lift as per building specification and direction of E/I. |
| 4 | Supplying,fiting and fixing 20 guage G.C.I. sheet gate fitted on M.S. Angel frame of size 60x60mm including cost of fabrication,prpviding necessary locking arrangement with haskal and dommy duty fixed in P.C.C. (1:2:4) blocks of required size ,applying a priming red lead paint over steel work taxes all complete as per draewing specification and direction of E/I |
| 5 | Supplying, fitting & fixing M.S. grill made of 20 x 6 mm flat as per approved design and drawing properly fabricated with joints continuous fitted, welded and finished smooth,carriage of grill at work site,hoisting as per building specification and direction of E/I.(where materials is not supplied by the deptt.) |
| 6 | Providing Tor steel reiforcement of 8mm. 10mm, 16 mm& 20mm dia. Bars as per approved design and drawing excludinjg carriage of M.S. bars to work site, cutting, bendig and binding wiith annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 7 | Supplying, fitting & fixing Callapsible gate of approved size and make properly fabricated with vertical double channel 20x10x2 mm at 100 mm centre and braced with M.S. flat diagonals 20x3 mm with top and bottom rails of T- iron,nuts,locking arrangemets,stopper,handles,including applying a priming coat of red lead paint, carriage, hoisting and taxes all complete as per direction of E/I |
| 8 | Dismantlingold plaster and pointing in cement or lime and raking out joints to 15 mm,depth wateringand disposal unservieable materials with all lead all complete as per directed by E/I |
| 9 | Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I |
| 10 | Labour for cutting old mosaic or precast terrazo tiles including cost of removing dirt,rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of carriage,taxes and royalty all complete as per building specification and direction of E/I |
| 11 | Providing and laying 25mm thick kotah stone tiles in risers of steps,skirting and pillar offapproved size,texture and colour over 12mm thick cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curring,taxes and royalty all complete as per building specification and direction of E/I. |
| 12 | Providing and fixing Ist qualityCeramic glazedwall tiles conforming to IS:IS: 15622 (Thickness to be specified by the manufacturer),of approved make, in all colour, shades except brugundy,bottle,green,black of any size as approved by E/I, in skirting risers of steps and dodo,over 12 mm thick bed of cement mortar 1:3 (1 cement:3 coarse sand) and jointing with grey cement slurry @ 3.3 kg/sqm,including pointing in white cement mixed with pigment of matching shade complete. |
| 13 | Supplying, fitting & fixing 35 mm th. Solid core type decorative single leaf flush shutters in doors with block board core blended with high quality phenol formal dehydes synthetic resin both side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts handle,cleats aldrop, door stopper & sand blocks & taxes all complete as per detail drawing building specification & direction of the E/I |
| 14 | Providing wall panelling with 3.5mm thick teak veneered decorative ply wood of standard make fitted and fixed over 50x12mm sal wood beads at 122mm centre properly screwed towall including cost of sprit polishing over ply wood and two coats of wood preservative paint over the besds of approved shade and make all complete as per specification and direction of E/I. |
| 15 | Providing two coats of plastic emulsion paint of approved shade and make over old surface including cost of cleaning surface thoroughyy and removing the scales of smoke and moss marks with jhama rubbing, scaffolding, washing, of floors and taxes all complete as per building specification and direction of E/I.Water CloserSection ( Wall) At Ground Floor |
| 16 | Providingprimer one coats of red lead paint ofapprovedmake over new steel surface including prepairing the surface after cleaning,removing dirt, scales. smoke, grease and sand papering,including cost of scaffolding and taxes, all complete as per building specification and direction of E/I. |
| 17 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly,scaffolding and taxes, all complete as per building specification and direction of E/I. |
| 18 | Dismanlting doors,windows and clerestory windows (Steel or wood) shutter including chaukhats, architrave, holdfasts etc. complete and stacking within 50 metres lead.Of area beyond 3 Sqm |
| 19 | Dismantling dressed stone work ashlar face stone work,marble work or precast concrete work manually/by mechanical means including stacking of serviceable and disposal of unseviceable materials within 50 metres lead as per direction of E/I |
| 20 | Supplying and fixing rolling shutter of approved make,made of required size M.S. laths,interlocking together their entire ienght and jointed together at the end by end lock,mounted on specially designed pipe shaft with brackets side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire spring manufacture from high tensile steel wire of adeqate strengh conforming to IS : 4454-part-1 and M.S. top cover of required thickness for rolling shutter.80x1.25 mm M.S laths with 1.25mm thick top Cover |
| 21 | Providing and fixing aluminium work for door, windows,ventilators and partition with extruded built to standard tubular section/appropiate Z- section and other section of approve make conforming to IS; 733 and IS: 1285,fixing with dsah fasteners of required dia.and size,including necessary filling up the gaps at neoprene i,e at top,bttom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium section shall be smooth,rust free, straight,mitred and jointed mechanically wherever required including cleat angle,Aluminium snaps beading for glazing/panneling, C.P.brass/ stainless steel screws, all complete as per architectural drawings and direction of E/I. (Glazing,paneling and dash fasteners to be paid for separately) For shutters of doors,windows and ventilators including providing and fixing hinges/pivots and making provision for fitting wherver required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) (Jindal) Power coated aluminium (minimum thickness of power coating 50 micron) |
| 22 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or gradeed wood particle board conforming to IS: 12823 Grade I Type II,in panelling fixed in aluminium doors,windows shutters and partition frames with C.P. brass/ Stainless steel screws etc. complete as per architectural drawing and directions of E/I. Pre-laminated particle board with decorative lamination on both sides |
| 23 | Providing and fixing glazing in aluminium doors,windows,ventilators shuttres and partition etc. with EPDM rubber/neoprene gasket etc. complete as per the architetural drawing and the directions of E/I (Cost of aluminium snap beading shall be paid in basic items) With float glass panes of 5.0 mm thickness (weight not less trhan 12.50 kg/ sqm) |
| 24 | Extra for mixing Recron 3S of reliance or equivalent in cementconcrete of all thickness in the proportion of 1 packet. (Roof Treatment Materials) |
| 25 | Providing and applying white cement bsed putty / White cement of average thickness 1 mm of approved brand and manufacturer,over thr plastered wall surface to prepare thesurface even and smooth conplete. |
| 26 | Finishing walls with premium Acrylic Smooth Exterior paint with Silicon additives of required shade. New work (Two or more coats applied @ 1.43 ltrs/10 Sqm over and including priming coat of exterior primer applied @2.20Kg/10 Sqm) |
| 27 | Providingprimer two coats of red lead paint ofapprovedmake over new steel surface including prepairing the surface after cleaning,removing dirt,scales.smoke,grease and sand papering,including cost of scaffolding and taxes, all complete as per building specification and direction of E/I. |
| 28 | Providing and fixing false ceiling at all height including providing and fixing of frame work of special section, power pressed from M.S. Sheets and galvanized with zing coating of 120 grm/sqm (both side inclusive) as per IS:277 and cosisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm,at 1200 mm centre to centre,one flange fixed to the ceiling with dash fastener 12.5 mm dia. x 50 mm long with 6 mm dia. bolts,other flange of cleat fixed to the angle hangers of 25x10x0.05 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermadiate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre,to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm,at 450 mm centre to centre shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia.x230mm long G.I.wire at every junction,including fixing perimetre channel 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre,with 25 mm long dry wall screws @ 230 mm interval,including jointing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm centre to centre,including jointing and finishing to a flush finish of tapered and squarw edges of the board with recommended jointing compound, jointing tapes,finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of perier suitable for board,all as per manufacture"s specification and also including the cost of making opennings for light fittings,grills,diffusers,cutouts made with frame of perimeter channels suitably fixed all complete as per drawings,specification and direction of the E/I (but excluding the cost of painting with): 12.5mm thick tapered edge gypsum moisture resistant board |
| 29 | Diluting and injecting chemical emulsion POST-CONSTRUCTIONAL anti termite (excluding the cost of chemical emulsion) Along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 litre per linear metre including drilling and plugging holes etc.With chlopyriphos/Lind NE e.c. 20% with 1% concentratio |
| 30 | Providing and fixing 18 mm thick gang saw cut,mirror polished,premoulded and prepolished,machine cut for kitchen platform,vanity counters,window sills,facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1cement ::4 coare sand),joints treated with white cement,mixed with matching pigment,epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levelsGranite Stone Slab colour black,cherry,Ruby,Redof any colour and shadeGranite Stone Slab colour black,cherry,Ruby,Redof any colour and shade. |
| 31 | Providing & fixing stainless steel (grade-304) railling made of hollow tubes channels, plates etc. Inculding welding, grinding, buffing, polishing and making curvature (whereever required ) and fitting the same with necessary stainless steel nuts and bolt complete, I/C fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of E/I (for payment purpose only weight of stainless steels members shall be considered execulding fitting accessories such as nuts bolts,fastner etc.) |
| 32 | Supplying and fixing cover without frame for manholes:-455x610mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 Kg |
| 33 | Constructing brick masonarychamber for undergroun C.I. inspection chamber and bebds with bricks in cement mortar1:4 (1 cement :4 coarse sand)C.I. cover with frame (light duty)455x610 mm internal dimensions,total weight of cover with frame to be not less than 38 Kg ( weight of cover 23 kg and weight of frame 15 kg)R.C.C top slab with 1:1.5:3 mix (1 cement:1.5 fine sand :3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10(1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat of neat cement on wall and bed concrete etc. Complete as per standard design.Insidedimension 500x 700 mmand 45 cm deep for pipe line with one or two inlets.With common burnt clay F.P.S (non modular) bricks of class designation 7.5 |
| 34 | Labour for laying,fitting and fixing NP2 R.C.C. spun pipe with collars in lines,level and grade and providing approved jointing materials and joints properly filled to make them leak,proof including providing sigth rail,bonning rod,night guard,Red light and barrier etc. all comlplete as per specification and direction of E/I.150 mm dia. R.C.Cpipe |
| 35 | Providing and fixing 75mm # vent pipe with cowl all complete as per specificatin and direction of E/I. |
| 36 | Providing and laying factory made chamfered cement concrete Paver block in footpath,parks,lawns, drive way or light traffice parking etc. of required strength,thickness and size/shape,made by table vibratory method using PU mould laid in required colour and pattern over 50 mm thick compacted bed of sand,compacting and proper embedding/laying interlocking paver block into the sand bedding layer through vibratory compaction by using plate vibrator filling the joints with sand and cutting of paver blocks as per required size and pattern,finishing at sweeping extra sand,complete all as per direction of E/I 80 mm thick C.C., Paver block of M-35 grade with approved colour design and pattern. |
| 37 | Providing and fixing aluminium tower bolts,ISI marked anodised (anodic coating not less than grade AC 10 as IS:1868) trasparent or dyed to required colour or shade,with necessary screws etc. complete 200x10mm |
| 38 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as IS:1868) trasparent or dyed to required colour or shade,with necessary screws etc. complete125x63x4mm |
| 39 | Providing and fixing chromium plates brass handle with necessary screws,nut and washers etc. complete 125 mm |
| 40 | Providing and fixingbright finished brass 100 mortice latch and lock with 6 levers and a pair of levers handle of approved quality necessary screws etc. complete |
| 41 | Providing and fixing aluminium hangingfloor door stopper,ISI marked, anodised (anodic coating not less than grade AC 10 as IS:1868) trasparent or dyed to required colour or shade,with necessary screws etc. completeTwin rubber stopper |
| 42 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer,(having brand logo with IS:3564 embossed on the body,door weight upto 36 kg to 80 kg and door width from 701 mm to 1000mm) with double speed adjustment with necessary accessories and screws etc. complete. |
| 43 | Providing and fixing water closet squatting pan( Indian type W.C. pan) with100 mm sand cast iron P andS trap, 10 litre low level white P.V.C. flushing cictern including flush pipe,with manually controlled device ( handle lever) comforming to is: 7231,with all fittings and fixtures complete,including cutting and making good the wall and floor wherever required. White vitreous china Orissa pattern W.C . Pan of size 580x440mm with integral type foot rests. |
| 44 | Providing and fixing white vitrous chainatypewater closet ( European type W.C. pan) with seat and lid 10 litre low level white P.V.C. flushing cictern including flush pipe,with manually controlled device ( handle lever) comforming to is: 7231,with all fittings and fixtures complete,including cutting and making good the wall and floor wherever required. W.C. pan with ISI marked white solid plastic seat and lid. |
| 45 | Providing and fixing white vitrous chainaflat back half stall urinal of size 580x380x 350mm with white PVC automatic flushing pipe,sereades with urinal and clamps (all in C.P. brass) with waste fitting in C.P. brass,including painting of fittings and cutting and making goodthe walls andfloor wherever required. Single half urinal with 5 litre P.V.C automatic flushing cictern |
| 46 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stailess steel plug 40 mm including painting of fittings and brackets,cutting and making good the wall eherever required.Kitchen sink with drain board (510x1040 mm bowl depth 250mm) |
| 47 | Providing and fixing wash basin with C.I. brackets 15mm C.P brass single hole basin mixer of approved quality and make,including painting of fitting and brackets,cutting and making good the walls wherever required.White Vitreous chaina Wash basin size 550x400mm with a 15 mm C.P. brass single hole basin mixer. |
| 48 | Providing and fixing C.P. brass bib cock of approved conforming toIS; 8931 : 15 mm nominal bore |
| 49 | Providing and fixing C.P. brass angle valve for basin mixer and geyser point of approved quality conforming to IS; 8931 15mm nominal bore. |
| 50 | Providing and fixing P.V.C..waste pipe for sink or wash basin including P.V.C. waste fitting complete..Flexible pipe 32mm dia. |
| 51 | Providing and fixing 600x450 mm beveled edge mirror of superior glass ( of approved quality) complere with 6mm thick hard board ground fixed to wooden cleats with C.P. brass srews and washers complete. Circular shape 450mm dia. |
| 52 | Providing and fixing PTMTtower ring trapezoidal shape 215mm long,,200nn wide with minimum distanceof 37mmfrom wall face with concealed fittings arrangmentof approved quality and colour weighing not less than 88 grms.. |
| 53 | Providing and fixing PTMT soap dish holder having length of 138mm breath 102mm height of 75 mm with concealed fitting arranement ,weight not less than 106 grms. |
| 54 | Providing and fixing on wall face unplasticised Rigid PVCrain water pipes conforming to IS: 13592 Types A ,including jointing with seal ring conforming to IS: 5382,leaving 10mm gap for thermal expansion, (i) Single socketed pipes.110mm diameter |
| 55 | Providing and placig on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked, with cover ad suitable locking arrangement and making necessary holes for ilet,outlet and overflow pipes but without fittings and the base support for tank. |
| 56 | Providing and fixing CPVC ( Chlorinated Polyxinyl Chloride pipes,having thermal stability for hot and cold water supply,including all CPVC plain brass threaded fittings, i/c fixing the pipe with clamps at 1.0 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. |
| 57 | 15mm nominal outer dia pipes |
| 58 | 25 mm nominal outer dia pipes |
| 59 | 32 mm nominal outer dia pipes |
| 60 | Providing and fixing on wall face unplasticised Rigid PVCrain water pipes conforming to IS: 13592 Types A ,including jointing with seal ring conforming to IS: 5382,leaving 10mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter |
| 61 | Providing and fixingon wall face unplasticised-PVC moulded fitting/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 type A, including jointing with seal ring conforming to IS: 5382,leaving 10 mm gap for thermal expension.Single Tee without door-110x110x110 mm |
| 62 | 110 mm Bebd or Elows |
| 63 | Point Wiring in PVC conduitwith piano type switch |
| 64 | Wiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular types switch,modular plate,suitable size G.I. box etc.as required.Group-B |
| 65 | Power plug wiring in PVC coduit (2x4 Sq.mm)Wiring fo light/ power plug1.5 Sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed copper conductor single core cable for loop earthing as required. |
| 66 | Supplying and fixing PVC/G.I BoxesSupplying and fixing suitable size G.I.box with Modular plate and cover fixing 3 pin 5/6 amp modular socket outlet 5/6 amp modular typeswitch connection painting etc. as reuired accessories;- 75mmx75mmx50mm deep (4""x4"") |
| 67 | 121mmx173mmx48mm deep (6""x8"") |
| 68 | Supplying and fixingBatten holder:Supplying and fixingBatten/ angle holder including connection etc. as required.: |
| 69 | Supplying and fixing2 pin 5 amp Ceiling rose on the existing junction box/wooden block including connection etc. as required. |
| 70 | Supplying and fixingPiano type switch/socket:--Supplying and fixingfollowing Piano type switch/socket on existing swiotch box.cover including connection etc. as required.5/6 amp,one way switch |
| 71 | 15/16 amp,one way switch |
| 72 | Wiring for Curcuit submain wiring along with earth wire with the following size PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required.2x1.5 sq.mm+1x1.5 sq.mm earth wire |
| 73 | 2x2.5 sq.mm+1x2.5 sq.mm earth wire |
| 74 | Supplying and fixingModular type electronic fan regulator:-Supplying and fixingstepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 75 | ITC exhaust fan upto 510mm sweep:- Installation ofexhaust fanupto510 mm sweep in exsiting opening ,including making holeto suit sizeof the above fanmaking good the damage connectiontesting commissioningetc. asrequired. |
| 76 | Supplying and fixing T.P. MCB DB Supplying and fixingfollowing way,single pole and neutral sheet,MCB distribution board 240 volton surface/ recess,complete with tinned copper busbar,neutral busbar,earth bar, din bar, detachable gland plate, interconnection, phoshatized and power painted including earthing etc. as required (But without MCB/ RCCB /Isolator )2 way,single door |
| 77 | Earthing with copper earth plate 600mm 600mm 6mm thick includingaccessories, and providing masonary enclosure with cover plate having locking arrangement and watring pipe etc. with charcoaland salt as required.(But without charcoal or coke and salt) |
| 78 | Supplying and fixing 25mmx5mm copper strip in pipe Supplying and fixing 25mmx5mm copper strip in 40 mm dia G.I. pipe from earth electrode as required |
| 79 | Supplying and fixingModular typeSwitch/scoketSupplying and fixingModular typeSwitch/scoket on the existing modular plate and switch box including connection but excluding modular plate etc. as required.5/6 amp,3 pin socket outlet |
| 80 | 15/16 amp one way switch |
| 81 | FITC of sheet steel enclosure with 160 amps TPN MCCB with buit in magnetic setting 1 no 200 amp TPN chaneover switches system (0n load)-1 no 63A TPN changeover switches system-1 no,16A MCB TPN-2 nos,ammeter,ASS CTs Volt meter VSS fuse,3 sets of phase indicating light with fuse Cu bus bar and also. |
| 82 | Cost of drilling 200 x165x123mm deep bore well in all kind of soil and rock in rural area for insalation of pump set with Hydrolic DTH ring machine all complete including all materials,tools,drilling ring,air compressure and equipment as well as fule,lubricant and cost of transporation of ring machine and other vertical up to site. |
| 83 | From 0.00 M to 50.00 M |
| 84 | From 51.00 M to 100.00 M |
| 85 | From 101.00 M to 150 M |
| 86 | Supplying,assembling,lowing and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia,conforming to IS:12818,including required hire and labour charges,fitting and accessories etc. all complete,for all depths,200 mm nominal size of dia. |
| 87 | Development of tube well in accordane with IS: (part-I) and IS: 11189,to establish rate of unstable water yield with outsand content (beyond permissible limit) with required capacityaircompressor,running the compressor for required time till well is fully developed,measuring yield of well by "V" notch method,collecting weter sample and getting testedin approved laborattory,i/c disinfection of tube well,all complete,inluding hire and lobour charges of air compressor,tools and accessories etc. all as per requirement and direction of E/I |
| 88 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe,removable as per requirement.all complete for bore well of : 200 mm dia. |
| 89 | Providing and fixing M.S. clam of required dia. to the top of casing/housing pipe of tube well as per IS: 2800 (Part-I),including necessary bolts and nuts of required size complete.200 mm dia. |
| 90 | Supplying 100 mm dia. Submersible pump sets conforming IS: 8034 and motor conforming IS :9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polyproylene/noryl impeller,motor suitable for working on 415+10,2 HP,50 Hz,AC supply with cable guard,thrust carbon/fiber bearing to withstand entire hydaulic thurst,water proof winding shall be provided.The pump set shall be suitable for direct coupling,pump shall have suitable outlet sa per manufactures design,Anti theust stream lined non return vave shall be provided with pump,3 metre submersible copper conductor cable in single/double run shall be provided with each pump Submersible pump set 100 mm dia. (with Polypropylene/Npryl Impeller) up to 20 stages 2 HP |
| 91 | Supplying fitting and fixing of standard make starter pannel Board with arrangement of all necessary protection including all taxes,royality etc. all complete. Job as per direction of E/I |
| 92 | Supplying fitting and fixing 3 core 4 sq.mm Flat copper submersible cable FINOLEX/HEAVELS makeincluding all taxes,royality etc. all complete.as per direction of E/I |
| 93 | Supply fitting and fixing lowering 50 mm dia.G.L column pipe -do-do all complete job as per direction of E/I |
| 94 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal ofexcavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design building specification and direction of E/I. |
| 95 | Extra for earth work hard soil (Vide classification of soil item-II) as per approved design building specification and direction of E/I |
| 96 | Earth filling in foundation trenchesand plinth in layers not exceeding 150 mm thick well watered rammed, fully compacted & fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M & lift of 1.5 M all complete as per building specification and direction of E/I.( mode of measurement compacted volume) |
| 97 | Providing designation 75B one brick flat soling joint filled with local sand including cost of watering. |
| 98 | Providing coarse clean sand in filling in foundation trenchesor plinth including ramming & watering in layers not exceeding 150 mm thick with all leads and lifts including cost of materials, Labour, royality & taxes all complete as per building specification and direction of E/I. ( mode of measurement compacted volume) |
| 99 | Providingand laying in position ( P.C.C) M-200 cement concrete of specified grade excluding the cost of centering and shutting-All work upto plinth level. 1:1.5:3 (1 cement :1.5 coarse sand (zone-III):3 graded stone aggregate 20 mm nominal size) |
| 100 | Providingand laying in position ( P.C.C) M-200 cement concrete of specified grade excluding the cost of centering and shutting-All work upto plinth level. 1:1.5:3 (1 cement :1.5 coarse sand (zone-III):3 graded stone aggregate 20 mm nominal size) |
| 101 | Providing 12 mm Thk.water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 mm with 5 % cico or any other approved water proofing compound including screening,curring with all leads and lifts of water,scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 102 | Structural steel work riveted, bolted or welded in built up section, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 103 | Providing corrugated G.S. sheet rofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. Limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surfaces) exclding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275gm/m2 |
| 104 | Providingand laying in position ( P.C.C) M-75 cement concrete of specified grade excluding the cost of centering and shutting-All work upto plinth level. 1:4:8 (1 cement :3 coarse sand:6 graded stone aggregate 40 mm nominal size) |
| 105 | Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks,bolt and nuts 8 mm dia. G.I. limpet and bitumen washers complete. |
| 106 | Making plinth protection 50 mm thick of cement concrete (1:3:6) (1 cement:3 coares sand:6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size,well remmed and consolidated and grouted with fine sand,including necessary excavation.levelling and dressing and finishing the top smooth. |
| 107 | Providing 250 mm widebrick drain in cement mortar (1:6) with av. 150 mm clear depth and 250 mm apron including cost of earth work involved with 75 mm cement concrete (1:4:3)over one brick degination75 A, flat soling in proper grade and slope at the base ,the drain duly plastered in C.M (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. |
| 108 | Providingand laying in position specified grade of reinforced cement concrete ( in foundation) M-200,excluding the cost of centering,shutting andfinishing reinforcement-All work upto plinth level.(Footing) 1:1.5:3 (1 cement :1.5 coarse sand (zone-III):3 graded stone aggregate 20 mm nominal size) |
| 109 | Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string course, fillets, Coloumns, pillars, piers, abutments, post and struts etc. aboveplinth level upto floor level,excluding cost of centering,shuttering,finishing and reinforcement. 1:1.5:3 I1 cement:1.5 coarse sand(zone-III),:3 graded stone aggregate 20 mm nominal size) |
| 110 | Cenering and shuttering include shuttering propping etc. and removal of from forEdges of Slab and Breaks in floor and wall Above 20 Cm Wide |
| 111 | Cenering and shuttering include shuttering propping etc. and removal of from for suspended floors,roofs,landing,balconies and access platform |
| 112 | Cenering and shuttering include shuttering propping etc. and removal of from forColumns,Pillars,Piers,Abutments,Posts and Struts |
| 113 | Providing 12 mm Thk. cement plaster(1:6) on walls with clean coarse sand of FM-1.5including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all completeas per building specification and direction of E/I |
| 114 | Providingand laying in position ( P.C.C) M-100 cement concrete of specified grade excluding the cost of centering and shutting-All work upto plinth level. 1:3:6 (1 cement :3 coarse sand (zone-III):6 graded stone aggregate 20 mm nominal size) |
| 115 | Reinforced cement concrete work in beam,suspended floors,roofs having slope 15 degree landing, balconies, shelves, chujjas, lintels, band, plain windows sills, staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement:1.5 coarse sand(zone-III) :3 graded stone aggregate 20 mm nominal size). |
| 116 | Cenering and shuttering include shuttering propping etc. and removal of from forFoundation,footing bases of column etc. mass concrete |
| 117 | Cenering and shuttering include shuttering propping etc. and removal of from forLintel, Beam, Plinth Beam,Girders,Bressumers and cantilevers with water proof ply 12 mm thick |
| 118 | Cenering and shuttering include shuttering propping etc. and removal of from forLintel, Beam, Plinth Beam,Girders,Bressumers and cantilevers with water proof ply 12 mm thick |
| 119 | Cenering and shuttering include shuttering propping etc. and removal of from forSuspended floors,Roofs,Landing,Balconies and access Platform with water proof ply 12 mm thick |
| 120 | Cenering and shuttering include shuttering propping etc. and removal of from forEdges of Slab Above 20 Cm Wide |
| 121 | Providing designation 75 A brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials raking out joints to 15mm depth , curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 122 | Providing and fixing circular/Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia. 140mm,73mm height,top lid of 1.5 mm thick M.S sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S sheet box by means of 3.3mm dia. round headed screws,one lock at the corner,Clamp shall be made of 12 mm dia. M.Sbar bent to shape as per direction of E/I |
| 123 | Providing and laying factory made chamfered edge cement concrete paver block in footpath ,parks,lawn,drive ways or light traffic parking etc. of required strength,thickness and size/shape,made by table vibratory method using PU mould,laid in required colour and pattern over 50 mm thick completed bed of sand,completing and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory completion by using plate vibrator,filling the joints with sand and cutting of paver blocks as per required size and pattern,finishing and sweeping extra sand. complete all as per direction of E/I 80 mm thick C.C. paver block of M-30 grade with approved colour design and pattern. |
| 124 | Providing designation 75 A brick work in C.M. (1:6) in Foundation with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials raking out joints to 15mm depth , curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 125 | Providing designation 125mm thick reinforced designation 75 A brick work in C.M. ( 1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 includingthe cost of screening,carriage materials scaffolding, raking out joints to 15mm depth , curing, taxes and royalty( but excluding the cost of reinforcement) all complete as per building specification and direction of E/I. |
| 126 | Providing 12 mm Thk. cement plaster(1:4) in wall with clean coarse sand of FM-1.5including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all completeas per building specification and direction of E/I |
| 127 | Providing 1.5 mm cement punning includind curring, carriage of water with all leads and lift as per building specification and direction of E/I. |
| 128 | Supplying and fixing cover without frame for manholes:-455x610mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 Kg |
| 129 | Providing and laying non pressure NP2 class ( light duty) R.C.C. pipe with collars jointed with stiff mixture of cement mortar in the proportion if 1:2 (1 cement:2 fine sand) including testing of joints etc. complete.150mm dia. R.C.C pipe |
| 130 | Constructing brick masonary chamber for underground C.I. inspection chamber and bends with brick in cement mortar 1:4 (1 cement:4 coarse sand) C.I. cover plate frame (light duty) 455x610 mm internal dimensions,total weight of cover with frame to be not less than 38 kg(weight of cover 23 kg and weigth of frame 15 kg) R.C.C. top slab with 1:1.5:3 mix ( 1 cement:1.5 fine sand:3 graded stone aggregate 20 mm nominal size) ,foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:Inside dimension 500x700 mm and 45 deep for pipe line with one or two inletWith common brunt clay F.P.S ( non modular) bricks of class designation 7.5 |
| 131 | Providing designation 75B edge brick soling joint filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 132 | Supplying,filling and spreading and levelling stone boulders of size range 5 cm to 20 cm,in recharge pit,in the required thickness,for all leads and lifts,all complete as per direction of E/I |
| 133 | Supplying,filling and spreading and levelling gravels of size range 5 mm to 10 mm,in recharge pit, over the existing layer of boulders.in the required thickness,for all leads and lifts,all complete as per direction of E/I |
| 134 | Supplying,filling and spreading and levelling coarse sand of size range 1.5 mm to 2 mm,in recharge pit, over the existing layer of gravels.in the required thickness,for all leads and lifts,all complete as per direction of E/I |
| 135 | Supplying,assembling.lowering and fixing in vertical position in bore unplasticized PVC medium well screen (RMS) pipe with rib conforming to IS: 12818 hire and labour charge,fitting and ,including accessories etc.all complete,for all depths,as per direction of E/I150mm nominal size dia. |
| 136 | Supplying,assembling.lowering and fixing in vertical position in bore unplasticized PVC medium well casing (CM) pipeof requiredconforming to IS: 12818 ,includingrequired hire and labour charge,fitting and accessories etc.all complete,for all depths,as per direction of E/I150 mm nominal size dia. |
| 137 | Providing and fixing M.S. suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe,removable as per requirement all complete for bore well of150 mm dia |
| 138 | Supplying,fitting and fixing M.S.40x40x4 mm IS2062 Grade A M.S. engle,hoisting steps,welded with 6 mm dia and 75 mm long M.S rods, anchore fixed in conctrete steps at the time of casting including taxes all complete as per direction of E/I |
| 139 | Providing and fixing 150 mm coir mat nylone net at the top of Richarge Chamber with all complete as per direction of E/I |
| 140 | Providing and fixingChlorinated Polyxinyl Chloride (CPVC) pipes,having thermal stability for hot and cold water supply,including all CPVC plain brass threaded fittings. This includes joining of pipes and fittings with one step CPVCsolvent cement,trenching,refilling and testing of joints complete as per direction of E/I,100 mm nominal dia.of pipe |
| 141 | Elbow32 mm nominal dia threade |
| 142 | CARRAIGE OF MATERIALS |
| 143 | Sand Lead-15 KM |
| 144 | Stone Chips Leads-10 KM |
| 145 | Bricks Lead-8 KM |
| 146 | Stone Metal,Lead-15 Km |
| 147 | Stone Boulder-grade-I,Lead-15 Km |
| 148 | Gravel-Grade-II,Lead-15 Km |
| 149 | GST@18% |
| 150 | Labour cess@1% |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
