Maharaja Agrasen Medical College has published Tender For Construction Of Toilets (Gents And Ladies) Near Shopping Complex And Departmental Store At Mamc, Agroha. Submission Date for this Tender is 15-04-2024. Toilet Bathroom Tenders in hisar Haryana. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. HSR:4.14 4.14.1 All kinds of soil. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: HSR:6.1 6.1.61:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) |
| 3 | 6.1.11:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form work for : HSR:6.29 6.29.1 Foundations, footings, bases for columns |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for HSR:6.30 6.30.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 6 | Suspended floors, roofs, landings, balconies and access platform HSR:6.30.3 |
| 7 | Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level HSR:6.33 6.33.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 8 | Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in:HSR:7.21 7.21.2 Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 9 | Providing and laying damp-proof course with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) HSR:6.8 6.8.1 40mm thick |
| 10 | Providing & fixing 3mm thick bitumen sheet complete in all respect. NS |
| 11 | Brick work with common burnt clay non-modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : HSR:7.22 7.22.2 Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 12 | Half brick masonry with common burnt clay non-modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level. HSR:7.28 7.28.1 Cement mortar 1:3 (1 cement :3 coarse sand) |
| 13 | 10 mm thick cement plaster. HSR:11.4 11.4.21:3 (1 cement: 3 fine sand) |
| 14 | 12 mm cement plaster of mix : HSR:11.5 11.5.3 1:4 (1 cement: 4 fine sand) |
| 15 | Supplying and filling in plinth withsand (conforming to zone-IV, IS 1542) under floors, including watering, ramming, consolidating and dressing complete. HSR:10.2 |
| 16 | Providing and laying of conglomerate floor 50mm thick cement concrete topping 1:2:4 HSR:10.7 |
| 17 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete. HSR:10.63 10.63.2 Size of Tile 600x600 mm |
| 18 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. HSR:10.58 |
| 19 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size). HSR:6.16 |
| 20 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: HSR:28.17 28.17.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm. |
| 21 | Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete HSR:11.58 |
| 22 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. HSR:11.75 11.75.2 Two coats |
| 23 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. HSR:8.26 8.26.2 Granite of any colour and shade 8.26.2.2 Area of slab over 0.50 sqm |
| 24 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. HSR:8.27 8.27.2 Granite work |
| 25 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fastenersto be paid for separately) : HSR:12.157 12.157.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 12.157.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 26 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. HSR:12.158 12.158.2 Pre-laminated particle board with decorative lamination on both sides |
| 27 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): HSR:12.159 12.159.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 28 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : HSR:12.98 12.98.2250x16 mm |
| 29 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : HSR:12.99 12.99.2250x10 mm |
| 30 | 12.99.4 150x10 mm |
| 31 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : HSR:12.102 12.102.1125 mm |
| 32 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: HSR:12.97 12.97.3 100x75x4 mm |
| 33 | Extra for grouting the joints of floor tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. HSR:10.70 10.70.2 Size of Tile 600x600 mm |
| 34 | Public Health Work Items Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: HSR:22.22 22.22.1 White vitreous chinaware Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 35 | Providing and fixing white vitreous chinaware extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous chinaware cistern / PVC cistern (with brass fitting) into the wall with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. HSR:22.33 |
| 36 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. HSR:22.38 |
| 37 | Providing and fixingpartitions for different type of urinals. HSR:22.50 22.50.1 Vitreous Chinaware Partition plate. 22.50.1.2 Large size 835mm x 355 mm 22.50.1.2.1 White |
| 38 | Providing and fixing white vitreous chinaware battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. HSR:22.46 |
| 39 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- HSR:22.2 22.1.4 White vitreous chinaware flat back wash basin size 550 x 400 mm with single 15 mm C.P. brass pillar tap. |
| 40 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. HSR:22.14 22.14.1 Semi rigid pipe 22.14.1.1 32mm dia |
| 41 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : HSR:22.104 22.104.1 15 mm nominal bore |
| 42 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. HSR:22.105 22.105.1 15 mm nominal bore |
| 43 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. HSR:22.107 22.107.1 15 mm nominal bore |
| 44 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 HSR:22.108 22.108.1 15mm nominal bore |
| 45 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. HSR:22.86 Concealed work, including cutting chases and making good the walls etc. 22.86.3 25 mm nominal outer dia Pipes |
| 46 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. HSR:22.87 22.87.3 25 mm nominal outer dia Pipes |
| 47 | Providing and fixing Unplasticised PVC connection pipe with brass unions : HSR:22.101 22.101.2 45 cm length 22.101.2.1 15 mm nominal bore |
| 48 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete: HSR:22.103 22.103.3 25 mm nominal bore |
| 49 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. HSR:22.109 |
| 50 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : HSR:22.173 22.173.1 With common burnt clay non-modular bricks of class designation 7.5 |
| 51 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : HSR:22.174 22.174.1 With common burnt clay non-modular bricks of class designation 7.5 |
| 52 | Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : HSR:22.175 22.175.1 With common burnt clay non-modular bricks of class designation 7.5 |
| 53 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. HSR:22.181 |
| 54 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. HSR:22.222 22.222.2 Single Socket Type B 22.222.2.2 110mm o/d SWR UPVC pipe lines laid complete |
| 55 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: HSR:6.1 6.1.61:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) |
| 56 | Providing & fixing CPVC union 25 mm dia Make: Prince, filonex, supreme complete in all respect. NS |
| 57 | Providing & fixing CPVC handle valve 25 mm Make: Prince, filonex, supreme complete in all respect. NS |
| 58 | Providing & fixing CPVC tank nipple 25 mm Make: Prince, filonex, supreme complete in all respect. NS |
| 59 | Providing & fixing health faucet Make: jaquar, ESSESS, cera complete in all respect. NS |
| 60 | CP grating 100 mm dia HSR: B1323 + Labour |
| 61 | Providing & fixing handicap S.S. rail for EWC & washbasin area Make: jaquar, ESSESS, cera complete in all respect. NS |
| 62 | Providing & fixing P trap 110mm x 110mm Make: Prince, filonex, supreme complete in all respect. NS |
| 63 | Providing & fixing Y tee 110mm x 110mm Make: Prince, filonex, supreme complete in all respect. NS |
| 64 | Providing & fixing elbow (90 degree bend) 110mm x 110mm Make: Prince, filonex, supreme complete in all respect. NS |
| 65 | Providing & fixing C.P. towel ring Make: jaquar, ESSESS, cera complete in all respect. NS |
| 66 | Providing & fixing soap dish large Make: jaquar, ESSESS, cera complete in all respect. NS |
| 67 | Electrical Work Items 23.4.1. Wiring for Light/Fan/callbell point with modular type switch/socketand GI box, Modular type face plate etcin 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. HSR 23.4.1.1 Group A |
| 68 | 23.4.2Wiringfor Twincontrollightpointwith2 nos, 2-ways,5 amp.Modular switch GI box and modular face platein 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe . HSR 23.4.2.1 Group A |
| 69 | 23.4.3 Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe, without separate control switchHSR 23.4.3.1 Group A |
| 70 | 23.4.4Wiring in PVCconduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing1 no 5/6 Amp 3/5 pin Modulartype socketand 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as requiredHSR 23.4.4.1 Group A |
| 71 | 23.4.5 Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 HSR 23.4.5.1Group A |
| 72 | 23.3.6Wiring main and sub mains in twosingle core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. HSR23.3.6.6 |
| 73 | 23.3.6Wiring main and sub mains in twosingle core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. 2 run of Size 2.50 Sqmm(1.1.80mm)HSR 23.3.6.7 |
| 74 | 23.3.6.8 Wiring main and sub mains in twosingle core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required.2 run of Size 4 Sqmm(1/2.24mm) HSR23.3.6 Group A |
| 75 | 23.7.6 Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceilingetc. includingthecostof PVCbends,inspectionboxes,iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia. HSR23.7.6.2 |
| 76 | 23.7.6Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceilingetc. includingthecostof PVCbends,inspectionboxes,iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 32 mm dia.HSR 23.3.6.3 |
| 77 | 23.8.4Supply and erection of 10.5 cm dia M.S.Fan box including 8 mm dia 30 cm long M.S. Road made into suitable suspension hook and erected in R.C.C. slab for the erection of fan complete with all labour and material required to complete the job. |
| 78 | 23.8.11Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. step type Fan Regulator 2 modules 300 watt23.8.11.7 |
| 79 | 23.8.11Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect.Blanking plateHSR23.8.11.10 |
| 80 | HSR-20.71.1 Supply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge 48" (1200mm) make-Havells/Crompton |
| 81 | HSR-20.72 Supplying, errection, testing of Exhaust fan (as per IS code 374) having a capacity of 45 cubic metre per minute complete with suitable G.I sheet ducting in structure confirming to latest IS specifications complete in all respect to satisfaction of Engineer-in-charge. Havells /Indoasian/Crompton |
| 82 | 23.22.4Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall includingbonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work.SPN DBDouble Door 8 way (2 incoming and 6 outgoing)HSR 23.22.4.2 |
| 83 | 23.22.5 Supply and erection of miniature circuit Breaker240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole HSR 23.22.5.1 |
| 84 | 23.22.5Supply and erection of miniature circuit Breaker240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. Double pole HSR23.22.5.4 |
| 85 | 24.1.1Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosuresonthetopetc.(butwithoutcharcoalorcokeandsalt)as required.HSR24.1.1 |
| 86 | 24.1.2Extra for using salt and char coal/coke for pipe earth electrode as required. HSR24.1.2 |
| 87 | 24.1.13 Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required.HSR 24.1.13 |
| 88 | 24.2.4 Laying of underground cable in pipe /existing open/closed trench etc as. 2.5 Sq mm to 10 Sq mm 2 to 4 Core HSR24.2.4.1 |
| 89 | 24.2.7Supply and erection ofsuitable compressiontype brass cable glands for underground Cable :- 10 sqmm to 16 sqmm Cable 2 to 4 CoreHSR24.2.7.2 |
| 90 | 24.2.8 Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work.10 sqmm HSR 24.2.8.3 |
| 91 | S/E of Surface type 18 watta slim trimless surface mounted LED edge-lit LEDs with M.S. Powder coated white housing. Total system lumen of 18 watt LED 6500k, Power factor >0.95, CRI (Ra) >80, LED lamp efficiency =140 lm/w, Average life >50000hours, complete with all accessories as required with connections.size-8 inches(Industrial) Make-crompton,Philiphs , orient (N.S.) |
| 92 | Supply for LT cable 10Sqmm 02 core Aluminium Armoured Cable (NS) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
