Military Engineer Services-MES has published Tender For Repair Maintenance Of Md / Otm Accommodation ( Including Mes Offices, Mes Colony And Repair / Maintenance Of Summer Appliances, Refrigerator, Ac At Rts And Depot Under Ge ( E ) Bareilly.. Submission Date for this Tender is 30-04-2024. AMC of Air Condition Tenders in bareilly Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-04-2024 |
| Sl. No. | Item Description |
| 1 | Taking downshutters only of any description area n"exc 1.00 sqm complete all as specified and directed. |
| 2 | Taking downshutters only of any description, area exc. 1.00 sqm but n,exc. 2.00 sqm, each, complete all as specified and directed. |
| 3 | Refixing ofshutters only of any description area n"exc 1.00 sqmat same opening complete all as specified and directed. |
| 4 | Refixing ofshutters only of any descriptionarea exc. 1.00 sqm but n,exc. 2.00 sqm, each at same opening complete all as specified and directed. |
| 5 | Taking down chowkats or frames with shutters (without taking off shutter from the frame) area n"exc 1.5 sqm complete all as specified and directed. |
| 6 | Taking down chowkats or frames with shutters (without taking off shutter from the frame) area exceeding 1.5 sqm but n.exc 4.00 sqm complete all as specified and directed. |
| 7 | Refixing ofchowkhat frame area n"exc 1.50 sqmat same opening complete all as specified and directed. |
| 8 | Refixing ofchowkhat frame area exceeding 1.5 sqm but n.exc 4.00 sqm, each at same opening complete all as specified and directed. |
| 9 | S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. (Note :- S & F Glass/gauge shall be measured and paid for separately) |
| 10 | S & F 35mm thick IInd class HW plain framed panelled shutter (any numbers of panel) with lock rail & panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneered on both faces.The size of rail as per IS: 1003 (part-I), kiln seasoned & chemically pressure treated all as spd. |
| 11 | S & F 35mm 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc.(with sash bars), divided in to square, edges of framing plain, chamfered or rounded, fitted with cut and mitered bead for securing glasses etc, window ventilators etc are provided with styles and rails as specified in SSR Part-I, 1991, Section- 8, Clause 8.20(b), complete all as specified and directed. |
| 12 | S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing. |
| 13 | S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC "C" channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing. |
| 14 | S&F for steel windows, ventelators confirming to IS-1038 with side hung shutters including box type hinges with steel handle, 2 Nos 100mm MS tower bolt over MS flats iron on eachopenable leaf and Z section handle and steel peg stay complete without glazing bars, dovetailed or welded including a shop coat of red oxide zinc chrome primer complete all as specified and directed. |
| 15 | S&F for steel windows, ventelators confirming to IS-1038 with side hung shutters including box type hinges with steel handle, 2 Nos 100mm MS tower bolt over MS flats iron on eachopenable leaf and Z section handle and steel peg stay complete with glazing bars, dovetailed or welded including a shop coat of red oxide zinc chrome primer complete all as specified and directed. |
| 16 | S&F for steel ventilators fixed type, with glazing bars completewelded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed. (Note :- Glassshall be measured and paid for separately). |
| 17 | S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n" exc. 0.5 sqm in each pane all as spd. |
| 18 | S & F 3mm thick figured glass pine head type and glazing with oil putty in square n" exc. 0.5 sqm in each pane complete all as specified and directed. |
| 19 | M&L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames / steel frames, glazed with putty or fixed with beads complete all as specified. |
| 20 | Hacking out old broken glass ( any thickness, size, quality and description) from wooden frames/steel frames, glazed with putty or fixed with beads and Supply and fixed, 3mm sheet glass ordinary quality andglazing with oil putty in square not exc. 0.5 sqm in each pane, complete all as specified and directed. |
| 21 | M&L for Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar or for inserting holdfasts or man holes andmaking good dismantalled portionin CM(1:3) or cement concrete (1:2:4) type B1 as required complete all as specified and directed. |
| 22 | S&F Mild steel work in framed work such as grills, gratings, ladders etc., with ends of bars shouldered and / or riveted, or forged into spikes, and similar work conforming to Fe 410 -0 or Fe 310 -0 complete all as specified and directed. |
| 23 | S&F second class hard wood plain solid straight chowkhats and frames wrought frammed ribated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 24 | S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned taks or galvanised wire staples complete all as specified and directed. |
| 25 | All as per Srl item No. 23 here in before but fix in repair |
| 26 | M & L for 2nd class hard wood fillets square, rectangular or triangular insection, chamfered on edges & face and bullnosed for sectional area n" exc 3 Sqcm complete all as specified and directed. |
| 27 | S & F Mild steel work as in holdfast conforming to Fe 410 -0 or Fe 310 -0 complete all as specified and directed. |
| 28 | S & F 200mm long mild steel barrel tower bolts stove enamelled black with bright bolt all as specified and directed. |
| 29 | All as per above Item no 27 but 100mm long |
| 30 | Supply and fix only 100mm long butt hinges medium weight cold rolled mild steel all as specified and directed. |
| 31 | All as per Srl item No. 29 here in before but 75 mm long |
| 32 | S & F 150mm long mild steel pressed handle oval type stove enamelled black complete all as specified and directed. |
| 33 | All as per Srl item No. 31 here in before butt 100mm long |
| 34 | S & F for 200mm long berrel tower bolt aluminium anodised with staples and bolt of extruded section complete all as spd. & directed. |
| 35 | S & F for 100mm long butt hinges extruded aluminium anodised complete all as spd. & directed. |
| 36 | S & F 150mm long extruded aluminium anodised handleall as specified |
| 37 | S & F 300mm mild steel ordinary rat rail , rod pattern springs including roller and roller plate( Helical door spring), complete all as specified and directed. |
| 38 | M & L 300mm long mild steel sliding door bolt, plate type stove enamelled black with bright bolt not less than 12mm dia and including minimum 6 bolts and nuts etc all as specified and directed. |
| 39 | Preparation newly wooden surfaces exc. 10 cm width or girth and applying two coat of synthetic enemelledpaint over a coat of pink primer complete all as specified and directed. |
| 40 | Preparation newly steel surfaces exc. 10 cm width or girth and applying two coat of synthetic enemelledpaint over a coat of red oxide including all preparation complete all as specified and directed. |
| 41 | Demolition of brick / stone work built in cement mortar including all quians, pillars etc. complete all as specified and directed. |
| 42 | M & L for brick work with sub class "B" bricks in cement mortar 1:6 straight or curved on plan exc. 6.00m mean radius with old size bricks complete all as specified and directed. |
| 43 | All as per Srl item No. 41 here in before but half brick in CM (1:4) |
| 44 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as directed and specified |
| 45 | M&L Glazed ceramic coloured tiles (square/ rectangular) with borderin vertical surface 300 mm x 450 mm / 300x600 x 7mm thick set and jointed in neat cement slurry andpointed in white cementor colouredcement to match the surface including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 46 | M&L providing non- skid glazed ceramic tiles coloured 9-10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 47 | M&L providing non- skid glazed ceramic tiles coloured 9-10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, isize as in vertical surfaces such as skirtingset & jointed in pointed in matching colour 5 mm thick epoxy filling in between tiling over andincl 10mm thick renderingin CM 1:4 complete complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge. . |
| 48 | M&L for Vitrified Glazed ceramic coloured / double charged / ultra charged tiles 9-10 mm thick square / rectangular) polished area of each tile 800 mmx 800 mm / 600mmx1200 mm size approved by GE in floors etc. set and jointed in neat cement slurry and pointed in matching colour5 mm thick epoxy filling in between tiling over andincluding 15mm thick screed bedin CM 1:6 complete complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 49 | M&L for vitrified glazed ceramic coloured / double charged / ultra charged tiles 9-10 mm thick square/ rectangular) polished area of each tile tile 800 mmx 800 mm/ 600mmx1200 mm size as in vertical surfaces such as skirtingset & jointed in pointed in matching colour 5 mm thick epoxy filling in between tiling over andincl 10mm thick renderingin CM 1:4 complete complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 50 | M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in matching colour5 mm thick epoxy filling in between tiling over andincluding 15mm thick screed bedin CM 1:6 complete complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 51 | M&L for vetrified Ceramic tiles 9 to 10 mm thick (Square/rectangular) Dark shade/ Double charged / ultra charged polished area of each tile exceeding 0.72 sqm but not exceeding1.50 sqm in vertical surface etc. up to 3.5mtr height (make Kajaria or equivalant) set and jointed with high performance chemical VX-1 or equivalant and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge. (Note:- colour, design will be selected by GE or User). |
| 52 | M & L 25 mm thick PCC 1:2:4type B0, using 12.5mm graded aggregate as in floors toreceive surface of tile complete all as specified and directed. |
| 53 | S&F GI tube 15 mm dia medium grade with all fittingsand fixed to wall, ceiling or laid in floors including taking down existing GI tubing 15 mm dia & connections complete all as specified and directed. |
| 54 | S&F GI tube 20 mm dia medium grade with all fittingsand fixed to wall, ceiling or laid in floors including taking down existing GI tubing 20 mm dia & connections complete all as specified and directed. |
| 55 | M&L Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubingetc., and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 56 | Refixing old retrieved steelwater tubing and connections in new or old position (Walls, ceiling, floors, etc.) 15mm boreincluding taking down existing GI tubing 15 mm dia & connections complete all as specified and directed. |
| 57 | Refixing old retrieved steelwater tubing and connections in new or old position (Walls, ceiling, floors, etc.) 20mm bore including taking down existing GI tubing 20 mm dia & connections complete all as specified and directed. |
| 58 | S & F and repair 15mm bore bib tap standard of PTMT any colour screwed down high pressure with crutch or capastan head screwed both ends for iron 15 mm bore pipe or for unions ( Minimum weight 120 Gms) all as specified. |
| 59 | S & F in repair15mm bore stop valves of PTMT screwed down high pressure, with crutch or capastan head screwed both ends (minimum weight 110 Gms) all as specified. |
| 60 | S & F in repair 15mm bore concealed stop valves long shank cost copper allow chromium plated fency type screwed down high pressure, with capstan handle long shank screwed both ends all as specified. |
| 61 | S & F of sink with drainage board made of stainlen steel 1 mm thick kitchen or lab with plugs washers and water incl bedding in cement work to drawt wall or incl fixing contilever bracket and connecting union to pipe over all size 915x460 mm bolw size 410 mmx 330mm x160mm complete all as specified and directed. |
| 62 | S&F in repairs for600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 63 | S & F and repair 15 mm borefency type bib tap chromium plated screwed down high pressure with crutch or capastan handle screwed both ends for iron 15 mm bore pipe or for unions complete all as specified and directed. |
| 64 | S & F in repair15mmbore stop valves cost copper allow chromium plated fency type screwed down high pressure, with crutch or capastan handle screwed both ends complete all as specified and directed. |
| 65 | S & F and repair 15mm bore pillar cock fency type cast copper alloy with capastan head,chromium plated, screw down, high pressure, screwed for iron pipe of 15 mm bore with all complete all as specified. |
| 66 | S & F and repairs fo brass Chromium plated shower rose 125mm sizewith or witout swivel joints including fixing to GI pipe all as specified and directed. |
| 67 | S & F for 20 mm dia Harrision curtain rails mild steel chromium plated including with fixing brackets stop rollers etc. complete all as specified and directed. |
| 68 | S&F PVC 10 ltr capacity symphonic action type, low level, flushing cistern, white, with inlet, ball valve, float and handle including MS suitable size bracket complete all as specified and directed. |
| 69 | S&F in repairs vitreous China water closet Orissa pattern of size 580x440mm, white, with "P" ro "S" trap and integral foot rest, front or back inlet and flush pipe of polytheylene 32mm dia for low level cistern including provision of cement concrete bedding complete all as specified and directed. |
| 70 | S & F vitreous China wash hand basin, of size 550 x 400mm including brackets, flat back with waste pipe and CI grating including all connections, fixed in repair, complete all as specified and directed. |
| 71 | S&F PVC connection 15mm size with PTMT nut of length450mm complete all as specified and as directed. |
| 72 | M&L for 32/50mm Waste fittings, brass, chromium plated for glazed ware sinks, basins,etc. with long screwed shanks and fly-nuts, flange end beddedinred leadcement and other end fixed complete all as specified and directed |
| 73 | S & F PVC waste pipe of 32 mm dia PVC socket for WHB / Kitchen sink complete including sink cuppling complete all as specified by and directed. |
| 74 | S & F for 100 mm dia of grating doom of PTMT (minimum weight 25 gms) complete all as specified and directed. |
| 75 | S&F rotational moulded polethylene water tank of 500 ltrs capacity, ISI Marked, white coloured (cylindrical vertical with closed top with suitable size ofM S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacityn exc 500 ltr complete all as specified and directed. |
| 76 | S&F in repairs Plain Aluminium sheet 0.56mm thick fixed with nailsat bottom, back and front side of wooden doors etcall as directed and specified |
| 77 | S&F 15mmGun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe complete all as specified and directed. |
| 78 | S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe complete all as specified and directed. |
| 79 | S&F as in repair float valves PVChigh pressure with polythene float and fly nut complete, screwed for iron pipe 20mm bore complete all as specified and directed. |
| 80 | S&F as in repair float valves PVChigh pressure with polythene float and fly nut complete, screwed for iron pipe 15mm bore complete all as specified and directed. |
| 81 | Taking down cement plaster on brick/stone wall etc including raking out joints/hacking for key scrubbing down with water etc including removal of rubbish to a distance upto 100 mtr complete all as specified and as directed. |
| 82 | M&L 15mm thick rendering in CM 1:4 in two coats (10mm+5mm), second coat mixed with water proofing compound on brick work or concrete surface finished fair and even up to second floor approx 9mtr height complete all as specified and as directed. (Note :cost of WPC deemed to be included in qouted rates ofitems) |
| 83 | M&L for 15mm thick rendering in cement mortar 1:6 to on brick masonary wall surfaces or on other than fair faces of brick masonaryfinishedeven and fair without using extra cement complete all as specified and directed. |
| 84 | M&L 5mm thick rendering in CM 1:3 as on ceiling finished even and smooth without using extra cement complete all as specified and as directed. |
| 85 | M&L for two coat of distemper oil emulsion white or tinted on newely plastered surface of wall after necessary preparation of surface complete all as specified and directed. |
| 86 | M&L three coat of white wash as on new plaster surface/concrete surface as on ceiling after necessary preparation of surface complete all as specified and as directed. |
| 87 | M&L two coats of cement base paint on new plastered surface after necessry preparationofsurface complete all as specified & as directed. |
| 88 | Dismantling of PVC pipes or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches if required upto 100mm bore including fitting complete all as specified and directed. |
| 89 | S & F 75mm dia spun type, cast iron, soil waste and vent pipe in any length, with or without ears, with cement joints, laid in trenches or under floors,in shaft portion up to 12 m height complete all as specified and directed. (ISI marked and conforming to relavent IS) |
| 90 | All as per Srl item No. 90 here in before but except Pipe |
| 91 | S & F 100mm dia spun type, cast iron, soil waste and vent pipe in any length, with or without ears, with cement joints, laid in trenches or under floors,in shaft portion up to 12 m height complete all as specified and directed. ( ISI marked and conforming to relavent IS) |
| 92 | All as per Srl item No. 92 here in before but Except Pipe |
| 93 | S & F in repairs CI bend 75 mm (any radius) or diminishing pieces (Tee, Elbow, Double Tee & socket) complete all as specified and directed. |
| 94 | S&F CI bends (any radius) 100mm bore (Tee, Double Tee,Elbow, Socket) complete all as specified and directed. |
| 95 | S & F 110mm dia PVC (SWR)pipes sigle socketed in any length with rubber ring joints fixed to wall/floor complete all as specified and directed. |
| 96 | S & F in repairs PVC (SWR) bend 110 mm any radius (Tee, Double Tee,Elbow, Socket) complete all as specified and directed. |
| 97 | S & F 75mm dia PVC (SWR)pipes double socketed in any length with rubber ring joints fixed to wall with neceesary FI Clamp of size 40X6 mm complete all as specified and directed. |
| 98 | S & F in repairs PVC (SWR) bend 75 mm any radius (Tee,Elbow & Bend as required as per site) complete all as specified and directed. |
| 99 | Taking out unserviceable Nahani trap / floor trap and M&L for 75 mm dia Nahani trap / floor trap with CIgrating with lead joints,complete all as specified and directed. ( ISI marked and conforming to relavent IS) |
| 100 | S & F in repairs 0.63 mm galvanised corrugated mild steel sheetingwith two corrugation side lap fixed with L & J type hook bolts and washers in roof, waals etc with grade of zinc coating 275 complete all as specified and directed. |
| 101 | S & F in repairs for 6mm thick AC sheet corrugated or semi corrugated sheet in roof covering fixed with J and L hook complete all as specified and directed. |
| 102 | S & F in repair for 6mm thick ACtwo pieces adjustable plain wing ridge fixed with coach screw complete all as specified and directed. |
| 103 | Demolition ofcement concrete in ground floorpaving n. exc. 15 cm thick below or above GLcomplete all as specified and directed. |
| 104 | M&L for 75 mm thick cementconcrete1:3:6 type C-2 (using20 mm graded crushed stone aggregate) as in plinth protection/path laid to slope of 1 in 12 and finishingcement concrete surface even and smooth without using extra cement with and including all necessaryform work to divide the area in panels, finishingexposededges fair or rounding or chamfering of exposed edgescomplete all as specified and directed. |
| 105 | M&L for 40 mm thick cementconcrete1:2:4 type B-1 (using20 mm graded crushed stone aggregate) as in floors laid in panels and finishing top surfaces ofcement concrete even and smooth without using extra cement including fixing only glass dividing strips to divide the area in panels and inserted in position to conform to design complete all as specified and directed. |
| 106 | Supply only glass dividing strips 3 mm thick and 38 mm wide complete all as specified and directed. |
| 107 | Demolition of cement concrete reinforced in any position including cut of bars as required, complete all as specified and directed. |
| 108 | M & L for RCC in 1:2:4 type B-1 using 20mm graded stone aggregate as in slab suported on walls and column in floor, roof landing, balconies,canopies deck slab and in shelves and man hole covers and the like including all necessary form work complete all as specified and directed. |
| 109 | M & L for RCC in 1:2:4 type B-1 using 20mm graded stone aggregate as in Fins, Fecias, louvers, parapet, railings and artificiar work exc 60 cm in height, newels, balustrade and the like complete all as specified and directed. |
| 110 | M & L formwork to soffits of suspanded slab such as roof slab, floor slab landing and similar work n" exc. 200 mm thick including fair finished complete all as spd and directed |
| 111 | M & L mild steelTMT bars,10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming toGrade-I IS-432 (Part -I) complete all as specified and directed. |
| 112 | All as per Srl item No. 112 here in before but 5 mm dia and over upto and including 10 mm dia in striupps |
| 113 | M&L 20-22 mm thick Granite of any colour(tablee rubbed and polished) as in windows cill, in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including form work, pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 114 | S& F in repair door closer hydraulically regulated Aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 115 | M&L for repairing to existing aluminium doorsof any size by straightening of frame / shutter, replacing the detoriated member with new, replacing the broken / non funcional hinges with new, replacing decayed rubber gasket with new, replacing the broken glass pane of any size with new 5.00mm thick tinted glass, replacing unserviceable handle, tower bolt, lock, floor spring, foundation box with governing pivot, top pivot, peg stay etc with new and including taking down and at same place after making the door / window smooth functional complete all as specified and directed. |
| 116 | S&F inVitreous China counter top oval type colouredwash basin suitable size including pillar taps with bottle trap, including waste pipe fixing on counter with stainless steel brackets complete all as specified. Make Jaguar or equivalent |
| 117 | S&F in repair for GI steel sheet cover / lid0.45m dia and 0.20m ht of 0.8mm thick of semi sphere shape hollowfixed to over head service tank of size500 ltrs to 1000 Ltrs capacity with proper fixing arrangementof hasp and staple and butt hinges fixed with small nuts and bolts complete all as specified and directed |
| 118 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position for capacity of water tank exc 250 and not exc 500Ltr. (Cleaning repairing, etc. measured separately) |
| 119 | Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided for. |
| 120 | M& L for cement concrete 1:2:4, Type B-1, using 20 mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered edgesall as directed. |
| 121 | M& L for 50mm thick cement concrete type B2 1:2:4,(using 20 mm graded stone aggregate) with water proofing compound as in roof padding, complete all as specified and directed |
| 122 | M&L for Polythene film, black, 50micron laid in floors and roof complete all as specified and as directed. |
| 123 | M & L for applying cement slurry over existing roof surface @ 3 Kg/Sqm incl mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and directed. |
| 124 | Supply and fix APP polymeric water proofing membrane, minimum 3 mm thick and weight 4 kg per Sqm with mineral, minimum 3.5 kg per Sqm without mineral weight make Dr fixit tochshield membrane/equivalent with rich bitumen and select polymers blended together to obtain excellent heat resistance & cold resistant by Dr fixit/ equivalent or super thermolay manufactured by M/S IWL Ltdby M/S Capital Steels and chemicals Pvt Ltd as approved by GE, black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or ‘EMW FLATE’ of M/S Texas India Ltd/ Dr fixit/ M/S IWL ltd)at the rate of 0.50 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 100 mmand sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructionscomplete incl removal of existing treatment all as specified and as directed. Note: (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate with using Dr fixit pidilite LW(+) , of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 85/25 confirming to IS-73, applied@1.20 Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.30 Kg/Sqm(ii) Polymeric membrane shall be taken to a height of 45cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii)The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv)In case of stone masonry parapet wall etc a groove of size 25mmx25mm(minimuim) shall be made in coved fillet at the junction of roof and parapet wall/mumty Chimny/other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen (v) Exposed surfaces of APP membrane shall be applied with two coat of bituminous aluminium paint @ 150 ml/Sqm. (vi) Above aspects are deemed to be included in quoted rate. |
| 125 | M & L for WPT in sunken floors as described here under:- Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 mixed with water proofing liquid @ 150 ml per bag of cement . (ii) Preparing plastered surfaces and providing APP polymeric water proofing membrane, minimum 4mm thick and weighing above 4.0 Kg/Sqm of make Dr fixit tochshield membrane with rich bitumen and select polymers blended together to obtain excellent heat resistance & cold resistant by Dr fixit or super thermolay manufactured by M/S IWL Ltdby M/S Capital Steels and chemicals Pvt Ltd as approved by GE, black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or ‘EMW FLATE’ of M/S Texas India Ltd/ Dr fixit/ M/S IWL ltd)at the rate of 0.40 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer"s instructionsincluding preparation of surface by removing the existing treatment, complete all as specified an as directed. Note :-(i) Polymeric membrane shall belaid in sunken floor and on sides up to finished floor level.(ii)The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii)Above aspects are deemed to be included in quoted rate. (iv) Supply only water proofing liquid shall be measured and paid seperately. |
| 126 | S&F 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed. |
| 127 | M & L for cutting out cracks to V-section in existing roofs or terracing cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand in 1:1 cm (by weight) complete all as specified and directed. |
| 128 | M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed. Note:-Water proofing liquid shall be measured and paid separately. |
| 129 | M & L PCC (1:5:10) type E-2 (using 40 mm graded stone aggrigate) as in foundation and mass concrete complete all as specified and directed. |
| 130 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) with "P" or "S" trap white, including connection to drain or out going pipe and flush pipe anti symphonize pipes etc complete all as specified and directed. Model :- CNS-WHT-WH-10(seat), CNS-WHT-WCN1 (seat cover) Jaquar , Parryware Model C 0297(seat) & E-8071 (seat cover), Cera Model NO S1050101(seat) & B-1510119( seat cover) |
| 131 | Taking down copper/aluminum point wiring complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings, holders etc and removing the items from site to store for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces to match with the existing surfaces of walls, floors etc complete all as specified and directed. |
| 132 | M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100 volts, drawn through & including concealed 20 mm rigid non metalic PVC conduit / casing caping with all accessories fixed on wall/ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size asearth continuty conductor connected to common earth dolly including required numbers and size of sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switches, switch sockets, sockets, regulators etc with 3 mm thick hylum laminated sheet cover including cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for:- NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black(iii) Earth - green(b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit. |
| 133 | One light point / Fan point / Exhaust point / Bell point controlled by one 5Aswitch |
| 134 | One 5A flush type socke out let t point on same boardboard |
| 135 | One5A flush type switch socket point on independent board |
| 136 | All as per Srl item No 131 here in before but One 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for wiring and earth wire |
| 137 | S&F switch piano flush type single pole one way 5 Amps. Make- Anchor/Havells |
| 138 | S&F Switch Piano flush type single pole one way 15 Amps. Make- Havells/ Anchor |
| 139 | S&F Socket outlet 2 in 1, 3 pin 5 Amp flush type. Make-Havells/ Anchor |
| 140 | S&F socket outlet 2 in 1, 3 pin 5Amp and 15 Amp Make-Havells/ Anchor |
| 141 | M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100 volts, drawn through & including concealed 20 mm rigid non metalic PVC conduit with all accessories fixed on wall/ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size asearth continuty conductor connected to common earth dolly including required numbers and size of sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switches, switch sockets, sockets, regulators etc with 3 mm thick hylum laminated sheet cover including cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for:- NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black(iii) Earth - green(b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit. |
| 142 | One light point / Fan point / Exhaust point / Bell point controlled by one 5Aswitch |
| 143 | One 5A flush type socke out let t point on same boardboard |
| 144 | One5A flush type switch socket point on independent board |
| 145 | All as per Srl item No 134 here in before but One 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for wiring and earth wire |
| 146 | S&F modular switch, one way 6 Amps, one module of suitable colour complete all as specified and directed. |
| 147 | S&F modular switch, one way 16 Amps, one module of suitable colour complete all as specified and directed. |
| 148 | S&F modular socket, 6 Amps, 2/3 pin combined, 2 module complete all as specified and directed. |
| 149 | S & F modular socket , 6 Amps/ 16 Amps, 2/3 pin combined, 2 module of suitable colour complete all as specified and directed. |
| 150 | S&F Lamp Holder,PVC/Polycarbonate type with back plate for batten fittingincludingLamp LED,aluminium heat sink powder coated white with PC diffuser & B22 base cap 9watt 240 Volt. |
| 151 | S & F in replacement of Ceiling rose, PVC/polycarbonate insulated body type, 3 terminal, 240 volts, 5 Amps complete all as specified and directed. |
| 152 | S&F in repairsstepped, (socket/switchtype) electronic fan regulator flush type, 180 Watt, 240 Volts. |
| 153 | S&F modular fan Stepregulator 120 watt, 230 Volts, 2 module of suitable colourcomplete all as specified and directed. |
| 154 | S & Fin repairs normal/worm white LEDTube lightfittings 18/20 Watt, 4", T-8complete with retrofit tubeincluding connecting up with 3 core flexible copper conductor cable of suitable size. |
| 155 | S & F in repairs Normal/worm whiteLEDTube lightfittings 9/10 Watt, 2", T-8complete with retrofit tubeincluding connecting up with 3 core flexible copper conductor cable of suitable size |
| 156 | S & F inrepairs normal/worm whiteLED Wall bracket type fitting 9 Watt complete |
| 157 | S & F in repairs LED Ceiling light 24Watt 2"x2" recesses/surface mounted die cast aluminium housing with frosted diffuser including worm whiteLED lamp 24 Watt |
| 158 | S&F in repairsLED Bldg security light 35Watt,made up pressure die cast aluminium housing with toughened glass and high power LED & Secondary lense with IP-65 &provn of bracketmade outof suitable size GI Pipe light grade up to 1.5 mtre long bent to shape with ms clamps nut bolts etc & paints for fixingofLED light on bldg/pole complete and including suitableelectric connection with flexible 1.0 sqmm PVC insulated copper conductor cable 1100 V grade |
| 159 | M & L in repairssub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn in & includingPVC Casing & caping /Conduit all as directed. |
| 160 | M & Lin repairsfor sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through in & includingin existingPVC Casing & caping/Conduit all as directed. |
| 161 | Fixing andconnecting electric meter upto 25 Amp including taking down & disconnection complete. |
| 162 | S&F in repairssheet metal enclousers (DBS) when MCBs to be used 4 way, 415 Volts double door three phase & neutral with 200 Amps rated bus bar.Make- Havells/ Indo Asian/HPL |
| 163 | S&F in repairssheet metal enclousers (DBS) when MCBs to be used 4 way, 240 Volts double door single pole & neutral with 200 Amps rated bus bar complete all as specified and as directed. |
| 164 | S&F in repairssheet metal enclousers (DBS) when MCBs to be used 8 way, 240 Volt, double door single pole & neutral with 200 Amps rated bus bar complete all as specified and as directed. |
| 165 | S&F in repairsIsolator three phase and neutral, 4-poles,63A-100A,415V10KA. B" curve type complete all as specified and directed. |
| 166 | S&F in repairsMCB single phase and neutral 16A-32A,230V10KA. B" curve type complete all as specified and directed. |
| 167 | S&F in repairsMCBSP 6A-32A, 230V. 10KA. B" curve type complete all as specified and directed |
| 168 | Dismantiling the ceiling fanandexamine complete part thoroughly , oiling, greasing all parts and complete overhauling of fan including replacementof spares & accessories,reassembling,making fully functional and also depositing to E/M stores & Hanging the ceiling fansafter cleaning,paintingand writing MES No with existing colour syntheticenamel paint,2.0 cm high lettersincluding electric connection with suitable electric cable complete all as specified ( Items used in replacement of unsv items shall be measured& paid separetly). |
| 169 | M&L for taking out the burnt copper wire, cleaning the Stator & Rotor with CTC, rewinding the fan with existing gauge and same nos of turns with super enameled copper including varnishing, baking, replacement of sleeves etc and reassembling the fan, testing, cleaning, painting & re-writing existing fan Nos complete all as specifiedand directed. |
| 170 | Supply in repairs/replacement ball bearings suitable for ceiling fan of any sweep. |
| 171 | Supply ii repairs/replacementfanhook clamps steel & rubber reel with set of 2 nos nut, bolts & pins suitable for ceiling fan hanging. |
| 172 | Supply in repairs/replacement fan down rod made of 15 mm bore GI pipe, 45 cm long complete all as specified & directed. |
| 173 | S & F in repairscapacitor 2.5 Mfd, 415 , 50Hz. Make- Universal/Tibcon |
| 174 | S & F in repairscopper winded rotor & stator assembly for making fully functional the unsv Ceiling fan complete with metallic cover screws, blades etcfor 1200mm sweep ceiling fan all as specified and directed. Make- Bajaj/Orient/ Havells/Crompton |
| 175 | M&L for disconnecting & taking out the burnt copper wire, cleaning the Stator & Rotor with CTC, rewinding the Exhaustfan with existing gauge and same nos of turns with super enameled copper including varnishing, baking, replacement of sleeves etc and reassembling the fan & testing , complete all as specifiedand directed. |
| 176 | S & F in repairscapacitor 4.0 Mfd, 415 , 50Hz. Make- Universal /Tibcon/Bajaj/ Usha |
| 177 | S & F in repairs motor kit copper winded for making fully functionalthe unsvPVC Exhaust fan 200mm sweep complete all as specified . Make-Bajaj/Orient/ Havells/Crompton |
| 178 | S & F in repairs Geyser element upto2.0KWas per existing such aspush type/thread type/dual clip type etc with rubber gasket suitable for Geyser ofcomplete all as specified. Make:- Bajaj/ Recold/ Havells. |
| 179 | S & F in repairs thermostateswitch ( ISI Marked )suitable for Geyser 25 Ltr capacity, adjustable 0 degree to 80 degree centigradeand acting at 70 degree centigrade. ISI Marked, Make- Thetta/Bajaj |
| 180 | M & L for general maintenance of Refrigerator of any capacity upto 310 Ltrs installed in various buildgs of RTS & Depot including rectification of leak testing & making smooth functional by replacing of worn-out spares ( Such as Relay, Over load protector, Thermostate switch with knob, painting with cleaning & charging of refrigerant gas etc) including necessary T &P and consumables required for welding/brazing works etc complete all as specified and directed. |
| 181 | M & Lin repairs Hermatically sealed compressor unit upto300/ 310 Ltrs cap refrigeratorincl Gas chrgingof Make Kirloskar/ LG or equivalent make |
| 182 | M & L for charging of R-134a refrigerant Freaon gas in refrigerator ofany capacityto its saturation level complete. |
| 183 | M & L in repairsFreezer assembly complete with freezer doorfor any capacityrefrigerator Make : Kelvinator, Voltas, Blue star, Alwyn, Usha Sriram |
| 184 | M & L in repairsDefrost Switch as per sample for any Capacity complete. |
| 185 | M & L in repairsfilter as per sample for any capacity complete. |
| 186 | M & L in repairsDoor handle of refrigerator of any capacity (as per sample). |
| 187 | M & L in repairs Door lock with keys as per samplefor refrigerator of any capacity |
| 188 | M & L in repairs timer for refrigeratoras per sample of any capacity. |
| 189 | M & L in repairs Door Rubber bidding& door inner lining panel complete all as specified for any capacity. |
| 190 | M & L in repairs replacement of capillary not less then 7 feet for any capacity complete with jointing ,brazing etc all as specified and directed . |
| 191 | S&Fin replacement of pin-valve for any capacity complete with jointing ,brazing etc all as specified and directed . |
| 192 | M & L for general Maintenance/ Servicing of Desert Cooler of any capacity installed in various buildgs of RTS & Depot including rectification of defects, testing & making smooth functional by replacing of worn-out spares ( such asplastic distributor, plastic body liftng pump vertcal upto 3mtr head, fan blade, capacitor,body painting etc )including necessary T &P and consumables required for welding/brazing works etc complete all as specified and directed. |
| 193 | M & L forreplacement fan motor upto 1/3 HP, 230 Volts, 50 Hz, three speed including fan blade suitable for Desert Cooler of any sizecomplete.Make Khaitan/Polar etc |
| 194 | M & L forreplacement side panel shutters made of24 SWGGI sheet suitable for any dimension withwood woolas per sample complete all as specified and directed. |
| 195 | M & L for replacement Front grill made out of 24 SWG GI sheet complete with two Nos piano switch &one Nos selector switch for controlling three speed of fan motor and the arrangement of change of direction of air flow horizontally and vertically including one Nos indicator lamps all as specified and directed. |
| 196 | Dismantling and taking out unserviceable water cooler of anycapacityof any description from MES store yard transporting to workshop and segregation to serviceable and unserviceable parts and reassembling the same after replacement of defective parts (such asstarting capacitor 80-100 Mfd, running capacitor 45 mfd,starting relay (1022&522 ), Thermostate switch, over load protector, float Valve, painting& wiring kit etc)and transporting back complete unit to MES store yard the job including cutting the copper suction tubing removing the strainer/ drier from the machine for replacement of gas filter, jointing, welding, brazing the copper filter testing the entire system with standing pressure and vacuum for 72 Hrs after necessary repairs to the system shall be charged with correct quantity of refrigerant gas to achieve required temperature with prescribed current rating and the same will be testedafter nacessary water connection with suitable PVCconnection & proper electric connection at the site complete all as specified and directed . |
| 197 | M & L forHermatically sealed unit (Compressor) for 120/ 150 Ltrs Cap incl Gas charging etc complete, |
| 198 | M & Lin repairs Hermatically sealed unit (compressor) for 40/80 Ltrs Cap incl Gas charging etc complete. |
| 199 | M & L charging of R-134 gas in water cooler of capacity 40/80/120/150 Ltr to its saturation level all as specified and directed. |
| 200 | M & L in repairswiring kit complete, screwed & covered in box for any capacity water cooler . |
| 201 | M & L in repairs fan motor suitable for any capacity water cooler complete all as specified and directed |
| 202 | M & L for replacement top cover with gasketof Water cooler of anycapacity including gasket complete all as specified and directed |
| 203 | M&L for detection and rectification of leakage in water cooler of any capacity copper capillaries by brazing and soldering and checking against specified pressure the jobs includes replacement of copper tube not exceeding 0.60 mtr in one job complete all as specified and directed |
| 204 | S&F in replacement of door lock with keys to water cooler of any capacity compete all as specified and directed |
| 205 | M&L for servicing of any type AC 1.5/2.0TR capacity from various location and any height, like first floor, for maintenance, opening cleaning with Magna/Hibirdsolution , giving water air pressure, oiling including taking out old unserviceable parts and fixing new part (such as starting capacitor 100-120 Mfd, running capacitor 45 &36 mfd,starting relay, Thermostate switch, over load protector, selector switch, nylon filter& wiring kit etc) complete with re-fixing at existing place after repairing, servicing, welding testing etc all as specified and directed. |
| 206 | M & Lin repairs harmatically company sealed unit compressor of 1.5 TR capacity single phase 230 volt welding/brazing of gas pipeline, vacuum pressure leakage, testing etc supply and fixing including charging refrigerant gas as required complete all as specified. |
| 207 | M & L in repairs harmatically company sealed unit compressor of 2.0 TR capacity single phase 230 volt welding/brazing of gas pipeline, vacuum pressure leakage, testing etc supply and fixing including charging refrigerant gas as required complete all as specified. |
| 208 | M & L in repairs FHP motor single phase of capacity 1/6 HP , 900 RPM, 220 V for 1.5/2TR Capacity for window type AC/split AC complete all as specified. Make : Gulmarg/ National / AUE |
| 209 | M & L in repairs Swing motor for window/split type A/C of 1.5/2 TR Cap as per sample complete all as specified. |
| 210 | M & L for replacement forcooling coil/condenser coil ofWindow capacity 1.5 T/2.type AC including welding/ brazing of pipe line, charging of refrigerantgas and testing of leakage as required including taking out existing one complete all as specified. |
| 211 | M & L for condenser coil ofSplit capacity 1.5 TR/2.0 TR capacity including welding/ brazing of pipe line, charging of refrigerantgas and testing of leakage as required including taking out existing one complete all as specified. |
| 212 | M & L for replacement PVC front grills cover suitable for 1.5 TR to 2 TR capacity of window type ACof any make (as per sample) complete all as specified and directed. |
| 213 | M & L for charging of refrigerant gas (134a) in window type / Split AC"s of any capacity after detecting the leakage and recifying including filling ofrefrigerant gas in the system andInstalltion, testing complete all as directed. |
| 214 | M & L for replacement blower motor for outdoor/indoor unit complete for window/split type AC of capacity 2 TR complete all as specified and directed. |
| 215 | M & L for replacement fan blade of blower aluminium casted make Amtrex, Carrier etc for 2 TR cap complete all as specified and directed. |
| 216 | M & L forreplacement offan motor andto the any type AC 1.5 TR complete all as specified and directed. |
| 217 | M & L for replacement offan motor andto the any type AC 2.0 TR complete all as specified and directed. |
| 218 | M&L forreplacement ofPCBandto the any type AC 1.5 TR/2.0 TR complete all as specified and directed. |
| 219 | M & L for general maintenance of Voltage Stabilizers of any capacity upto 5.0 KVA installed with electrical appliances in various locations of RTS & Depot including rectification of testing & making smooth functional by replacing of worn-out spares (such astransformer 1.2 to 12.0 Amp capacity, Circuit plate, Volt meter, indicator lamp, relay 20 Amp mini type& selector switch) including necessary T&P and consumables required for welding/brazing works etc complete all as specified and directed. |
| 220 | M&L for providinghigh and low voltage cut out device, high low voltage cut off with time delay relay 2 to 3 minutes 2-3 minute over low voltage 180 volts AC and high voltage 260 Volt AC at every cut off for 4 & 5 KVA capacity voltage stablizer complete all as specified. |
| 221 | S&Fin repairssingle pole and neutralenclouser having IP -67protection with a three pin& earth plug with socket complete andone SPN, 20 A , 240 V MCB complete all as specified and directed Make- Havells/HPLHavells/HPL/Shalabh |
| 222 | S & F in repairs 3 pin 16 A plug top 230 Volts complete all as specified and directed. ISI Marked ,Make-Bajaj/Anchor/ Havells |
| 223 | S&F in replacement of copper flexible cable 1.0 sqmm, 3 corecomplete all as specified and directed |
| 224 | S&F in replacement of copper flexible wire three core of size 1.5 sqmm,3 core complete all as specified and directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
