Military Engineer Services-MES has published Tender For Repair Maintenance To Firing Range At Ats Belagavi. Submission Date for this Tender is 24-04-2024. Firing Range Tenders in Belagavi Karnataka. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavating over areas, not exceeding 1.50 m deep and getting out in soft/loose soil complete all as specified and directed |
| 2 | Screening of Sand and saw dust obtained from Srl item No.1 above by manual or machine byheavy type / big size seive with help of JCB machine complete all as specified and directed |
| 3 | Removing of excavated material exc 250 mbut not exceeding 500 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed |
| 4 | Supply only sand and saw dust mixed in proportion 1:1 including depositing and stacking the same as directed by Engineer-In-Charge. |
| 5 | Forming embankments with sand and saw dust spread in layers not exc. 30cm thick and finishing to required slope, size and shape etc, not.exc 1.50 m high from base complete all as specified and directed |
| 6 | Forming embankments with sand and saw dust spread in layers n.exc. 30cm thick, and finishing to required slope, size and shape etc, exc 1.50 m but not exc 3.00 m high complete all as specified and directed |
| 7 | Forming embankments with sand and saw dust spread in layers n.exc. 30cm thick, and finishing to required slope, size and shape etc, exc 3.0 m but not exc 4.5 m high complete all as specified and directed |
| 8 | Surface dressing of not exc 15 cm deep of soft/loose soil including levlling of groundcomplete all as specified and directed |
| 9 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard dense soil including nclearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots and trees not exceeding 30cm girth removing rubbish upto 50 meters outside peripheri of the area under clearance complete all as specified and directed. |
| 10 | M&L for complete removal of existing treatment old decorative surface of walls, pilasters, cornices, including necessary preparation of surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and directed |
| 11 | Demolition of precast concrete block walling, built in cement mortar etc complete all as specified and directed. |
| 12 | Demolition of cement concrete (unreinforced) of any description in any position complete all as specified and directed |
| 13 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description in any position complete all as specified and directed |
| 14 | M&L for plain cement concrete 1:4:8type D-2 (using 40 mm graded stone aggregates) as in mass concrete complete all as specified and directed. |
| 15 | M&L forplain cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregates) as in surface channels and drains complete all as specified and directed. |
| 16 | M&L forpre-cast cement concrete block masonry with solid blocks of mix 1:3:6(using 20 mm graded crushed stone aggregates), exceeding 10 cm in width and setting in mortar 1:6 complete all as specified and directed |
| 17 | M&L for plain cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and necessary Use and waste of Form work complete all as specified and directed |
| 18 | M&L forPre-cast reinforced cement concrete 1:2:4, type B-1 (using 20 mm graded crushedstone aggregates)as in cover slab set and jointed in CM 1:4 including necessary form work complete all as specified and directed. |
| 19 | M&L forTMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hoping for columns end and binding with mild steel barber wire (annealed) not less than 0.9 mm dia complete all as specified and directed |
| 20 | Taking down cement plaster on brick / concrete /stone masonry walls etc including racking out joints, hacking for key, scrubbing down with water etc complete including removing rubbish off the premises complete all as specified and directed |
| 21 | M&L for rendering 20mm thick on fair faces of brick work or concrete/stone wall surfaces in CM 1:4 to be finished even and smooth without using extra cement all as specified and as directed. |
| 22 | M&L for preparing of newly plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and directed |
| 23 | Extra for forming fair finished drain or channel over 30 cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends complete all as specified and directed |
| 24 | Dismantling of stone slabs, tiles and paver blocks of any description or thickness, laid dry or laid dry and pointed in floors, aprons complete all as specified and directed |
| 25 | M&L forprecast cement concrete designer tiles, bullnosed, rubber moulded, 25 mm thick set,jointed and pointed in neat cement slurry with white cement & pigment to match the colour of tiles complete all as specified and directed |
| 26 | M&L for15 mm thick cement mortar screed bed in CM (1:6) complete all as specified and directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
