Military Engineer Services-MES has published Tender For Daily Repair Maintenance And Resolving Of Complaints Of B/R On Armaan Web Portal Under Age B/R-I Of Ge ( North) Meerut Cantt. Submission Date for this Tender is 23-04-2024. Website Designing and E commerce Tenders in meerut Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Attending complaints related to plumbing/water supply and obtaining completion from user including minor repair such as replacement of washers, tightening of taps, tightening of check nuts/unions/sockets/PVC connection etc and making water supply functional in case of blockage, refixing of GI pipe joints, application of white cement where required, complete all as specified and directed by Engineer in Charge. |
| 2 | Attending complaints related to carpenter work and obtaining completion from user including repair/easing of doors re-fixing or tightening of doors, windows, resecuring of door/window wire guage, (fixing only) builders hardwares, helical door spring including use of all types ofnails, screws etc which are required to make good the work, complete all as specified and directed by Engineer in Charge. |
| 3 | Attending complaints related to black smith work and obtaining completion from user for resecuring/easing/minor repair to make functional of steel doors, steel windows, steel rolling shutter and gates etc by greasing,oiling & cleaning and changing of required fittings, fixtures & compnents etc including necessary welding complete all as specified and directed by Engineer in Charge. |
| 4 | Taking downaluminium door/window shutter of any size n exc 2.5 Sqm each & refixing in the same position / opening after easing and adjusting, tightening of joints or changes of hinges, screws, cleats, beadings, rubber gasketetc, as per site requirement to make functional the shutter, complete all as specified and directed by Engineer in Charge. |
| 5 | Taking down Shutters and refixing in same opening after easing and adjusting of any description n.exc 1 sq. m each including resecuring/changing of builders hardwarecomplete all as specified and directed. |
| 6 | Taking down and refixing of shuttersin same openingafter easing and adjusting of any description exc 1 sq. m and n exc 2 sq. m each including resecuring/changing of builders hardware complete all as specified and directed. |
| 7 | M & Lfor repair of leakage/seepage from the WC of the upper Qtr,including change of WC with trap ("P"/"S" trap) & connector, Seal all joints of u/g pipes, resecuring cistern and connected fittings, sewage down pipe, making good the floor/walls matching with existing floor/walls complete all as specified and directed by the Engineer-in-charge. |
| 8 | M & Lfor repair of leakage/seepage from the Nahani trap/floor trap of kitchen/bathroom/washbasin of the upper Qtr, in any position at any height, complete including change of floor trap,pipes embeded in floor,Seal all joints of u/g pipes, making good the floor/walls matching with existing floor/wallsComplete all as specified and directed by Engineer-in-Charge. |
| 9 | S&F in repair PVC low level flusing cistern kit, complete all as specified and directed by Engineer in Charge. |
| 10 | S&F in repair ,ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe 15mm bore (Minimum weight 142 gms) complete all as specified and directed by Engineer in Charge. |
| 11 | S&F in repair , ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe 20mm bore (Minimum weight 210 gms) complete all as specified and directed by Engineer in Charge. |
| 12 | S&F in repair , ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe 25mm bore (Minimum weight 455 gms) complete all as specified and directed by Engineer in Charge. |
| 13 | S&F in repair ,bib tap standard of PTMT any colour high pressure screwed for iron pipe 15mm bore (Minimum weight 90gms) complete all as specified and directed by Engineer in Charge. |
| 14 | S&F in repair , stop/angle valve of PTMT any colour high pressure screwed for iron pipe 15mm bore (Minimum weight 90gms) complete all as specified and directed by Engineer in Charge. |
| 15 | S&F in repair ,CP waste coupling(half or full threaded) for discharge pipe of 32mm bore (Minimum weight 45gms) complete all as specified and directed by Engineer in Charge. |
| 16 | S&F in repair PVC waste pipe for 32mm bore pipe complete all as specified and directed by Engineer in Charge. |
| 17 | S&F in repair , PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer in Charge. |
| 18 | S&F in repair , PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed by Engineer in Charge. |
| 19 | S&F in repair , CP grating doom 100 mm dia complete all as specified and directed by Engineer in Charge. |
| 20 | S&F in repair , CP grating doom 125 mm dia with waste hole, complete all as specified and directed by Engineer in Charge. |
| 21 | S&F in repair , 15mm bore Flexible CP shower hose with CP brass nut of length 1 m to 1.2 m suitable forHealth faucet & hand showerComplete all as specified and directed by Engineer-in-Charge. |
| 22 | S&F in repair , CP Health faucet fixed with spring action and lever along with Flexible shower hose with brass nut of length 1 m to 1.2 m fitted in the existing water connection in the toilets,Complete all as specified and directed by Engineer-in-Charge. |
| 23 | S&F in repair , CP Jet Spray of Standard size for EWC alongwith CP connection and all fittings as fixed, Complete all as specified and directed by Engineer-in-Charge. |
| 24 | S&F in repair , toilet paper holdercast copper alloy chromium plated fixed to walls with chromium platedbrass screws, complete all as specified and as direted by the Engr-in-Charge |
| 25 | Supplied and fixed in repairs CP towel ring 200mm dia brass CP conforming to the sample kept in the office of Engr-in-Charge complete all as specified and directed. |
| 26 | S&F in repair , of PVC seat cover for EWC colour white incl hinges, complete all as specified and as direted by the Engr-in-Charge. |
| 27 | M&L for 1mm thick MS plain sheet for making modified lid of water tank and fixed with 04 nuts and bolts for water tanks for water capacity n.exc 750 ltr complete all as specified and directed |
| 28 | S&F in repair , brass face/ spindle for Taps, stop cocks, pillar taps, CP mixer etc,complete all as specified and as direted by the Engr-in-Charge |
| 29 | S&F in repair , CP cast copper alloy bib taps screwed down high pressure for 15mm bore pipe, ISI marked complete all as specified and directed by Engineer in Charge. |
| 30 | S&F in repair , CP pillar taps cast copper alloy quarter turn, fancy type CP screwed down high pressure for 15mm bore complete all as specified and directed by Engineer in Charge. |
| 31 | S&F in repair , Stop valve/angle valve Fancy type CP cast copper alloy screwed down high pressure with capstain head for pipe of bore 15mm complete all as specified and directed by Engineer in Charge. |
| 32 | S&F in repair , hot and cold water mixer for Sink/WHB/Bathroom chromium plated quarter turn screwed down for pipe of bore 15mm, including necessary fittings, complete all as specified and directed by Engineer in Charge. |
| 33 | S&F in repair 10 litre capacityPVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed. |
| 34 | S&F in repair vitreous china wash basin white flat back,size550x400 mm, with & including 32mm dia PVCwaste pipe and waste coupling with & including angle iron brackets of suitable size & length or erecting stand etc complete all as specified and directed. |
| 35 | S&F in repair,Vitreous china squating pan, orissa pattern size 580 x 440mm and making good, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., including trap set in and including concrete, in repair, Complete all as specified and directed by Engineer-in-Charge |
| 36 | S&F in repair, sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm,in repairs,complete all as specified and directed by Engineer in Charge. |
| 37 | S&F in repair,Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs washers and waster including beeding in cement mortar on to dwarf wall or influding fixing cantilever brackets and connecting union to pipe overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160mm, in repair, Complete all as specified and directed by Engineer-in-Charge. |
| 38 | S&F in repair,for Kitchen plate rack made of stainless steel 1 mm wall thickness with plugs washers asoverall size of 75cm x 75 cm including fixing to wall and all assessaries in repair, Complete all as specified and directed by Engineer-in-Charge. |
| 39 | Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed. |
| 40 | Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed. |
| 41 | M & L for repairs GI tubing concealed or open incl replacing of unserviceable GI fittings, medium grade ISI mark like elbow, socket, nipple, union socket, tee etc with the existing size complete including making necessary threading work to be carried out upto any height or on walls for 15mm bore of pipe complete all as specified and directed by Engineer in Charge. |
| 42 | M & L for repair GI tubing concealed or open incl replacing of unserviceable GI fittings, medium grade ISI mark like elbow, socket, nipple, union socket, tee etc with the existing size complete including making necessary threading work to be carried out upto any height or on walls for 20mm bore of pipe complete all as specified and directed by Engineer in Charge. |
| 43 | S&F in repair, Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500ltr capacity hoisted and fixed in position all as specified in SSR Part I.,including taking down of exiting tank, complete all as specified and directed by Engineer in Charge. |
| 44 | S&F in repair, Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 ltr capacity hoisted and fixed in position all as specified in SSR Part I,including taking down of exiting tank, complete all as specified and directed by Engineer in Charge. |
| 45 | M & L for Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc of capacity upto 500 ltrs and endorsed the word "CLEANED ON" and "DATE" (in DD-MM-YY form) with stencil of letter size 10cm and refixing the float valve and plugging wash pipe complete all as specified and directed by Engineer-in-Charge. |
| 46 | M & L for Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc of capacity exc 1000 ltrs and upto & including 2000 ltrs and endorsed the word "CLEANED ON" and "DATE" (in DD-MM-YY form) with stencil of letter size 10cm and refixing the float valve and plugging wash pipe complete all as specified and directed by Engineer-in-Charge. |
| 47 | S&F in repair , CP Tubular towel rail, 20mm dia, 60cm long between flanges including brackets complete all as specified and directed by Engineer in Charge. |
| 48 | S&F in repair , looking mirror of size 600x450mm with PVC mouldingcomplete all as specified and directed by Engineer in Charge. |
| 49 | S&F in repair , Hydraulic door closer designation No 2 universal type weight between36 to 60 kgs of aluminium body complete all as specified and as directed by the Engineer-in-Charge |
| 50 | S&F in repair , 300mm mild steel helical door springrat tail type including collar plate and welding if required or otherwise fixed with screw on wooden frames complete all as specified and directed by Engineer in Charge |
| 51 | S&F in repair , Aluminium, anodised, barrel tower bolts of extruded section 150mm size, Complete all as specified and directed by Engineer-in-Charge. |
| 52 | S&F in repair , Aluminium, anodised, barrel tower bolts of extruded section 100mm size, Complete all as specified and directed by Engineer-in-Charge. |
| 53 | S&F in repair , Aluminium handles, cast type, anodised 150mm size complete all as specified and directed |
| 54 | S&F in repair , Aluminium handles, cast type, anodised 100mm size complete all as specified and directed |
| 55 | S&F in repair , Hasp and staple 100mm size, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, Complete all as specified and directed by Engineer-in-Charge. |
| 56 | S&F in repair , Floor door stopperof aluminium alloy body and tongue with rubber cover ends, Complete all as specified and directed by Engineer-in-Charge. |
| 57 | S&F in repair , 125 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed |
| 58 | S&F in repair , 75 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed |
| 59 | S&F in repair , Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified and directed |
| 60 | S&F in repairsgalvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed. |
| 61 | Hacking out old broken glass (any thickness, size, quality or description) not exc 0.5 sq.m from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. |
| 62 | S&F in repair , sheet glass ordinary quality 3mm thick and glazing with oil putty/wooden beadingin squares not exceeding 0.50 Sqm including hacking out, complete all as specified and directed by Engineer in Charge. |
| 63 | S&F in repair , figured glass, pinheaded type ordinary quality 3mm thick and glazing with oil putty/wooden beading in squaresnot exceeding 0.50 Sqmincluding hacking out,complete all as specified and directed by Engineer in Charge. |
| 64 | S&F in repair , 5.5 mm thick tinted/pin headed figuredglass fixed with rubber gasket and aluminium snap beadingincluding hacking out, complete all as specified and directed by Engineer in Charge. |
| 65 | S&F in repair , 18/19mm thick Particle board interior grade, prelaminated one side with decorative choice lamination and other side lamination,fixed with nails or screws, complete all as specified and directed by Engineer-in-Charge. |
| 66 | S&F in repair , 6 mm thick Plywood, grade BWR, type BB, fixed with nails or screws to timber frame work, complete all as specified and as direted by the Engr-in-Charge. |
| 67 | S&F in repair 20 mm dia Stainless steel drapery rod standard quality as approved by Engr-in-charge complete all as specified and directed. |
| 68 | Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches if required for 110mm and 75mm bore of pipe complete all as specified and directed. |
| 69 | S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed. |
| 70 | S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed. |
| 71 | Demolition of brick work/stone work built in cement mortarincluding all quoins, arches, pillars, coping etc. complete all as specified and directed. |
| 72 | M&L brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed |
| 73 | M&L Brickwork with subclass `B" bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified and directed |
| 74 | Taking down cement or cement lime plaster, any description on stone walls etc incl raking out joints hacking for key, scrubbing down with water, etc complete all as specified and directed |
| 75 | Supply only liquid water proofing compound complete all as specified and directed |
| 76 | M&L for rendering 15mm thick cement plaster 1:6 on stone masonry surface or surface other than fair face of brickwork surface finished even and smooth without using extra cement complete all as specified and directed |
| 77 | M&L for Rendering 10mm thick in (1:3) cm on fair faces of ceiling complete all as specified and directed |
| 78 | M&L for rendering 15 mm thick in cement mortar 1:6on fair faces of brick work or concretevertical surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 79 | M&L for preparing new plastered or un-plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed. |
| 80 | M&L for preparing of new plastered or un-plastered surfaces and applying two coats of oil bound distemperover chalk whiting primer, complete all as specified and directed. |
| 81 | M&L for complete removal of existing treatment and preparation of old plastered or un-plastered surfaces and applying two coats of oil bound distemper over chalk whiting primer, complete all as specified and directed. |
| 82 | M&L for preparationof new plastered surfaces of wall and applyingtwo coats of cement base and incl primer paint complete all as specified and directed. |
| 83 | M&L complete removal of existing treatment of wall andpreparationof old plastered or Un plasteredsurfaces of wall and applyingtwo coats of cement base paint over primer complete all as specified and directed. |
| 84 | M&L for 75 mm thick cement concrete 1:3:6 type C1, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3)complete all as specified and as directed. |
| 85 | Taking down chowkats or frame of any description n exc 1.5 Sqm each(without taking off shutters from the frames) complete as specified and directed. |
| 86 | Taking down chowkats or frame of any descrip tion exc 1.5 Sqm each and n.exc 4 Sqm (without taking off shutters from the frames) complete as specified and directed. |
| 87 | S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing,conforming to Fe-410W (Gde E-250) quality-A, complete all as specified and directed. |
| 88 | S&F, 35mm thick, second class HW in glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed by Eng-in-Charge. |
| 89 | S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed |
| 90 | S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to wooden door Shutters/aluminium sliding shutters complete all as specified and directed. |
| 91 | S&F MS framed work such as grills, guard bars of window and similar work with ends of bars shouldered and/ or riveted, or forged into spikes conforming to Fe 290(Gde E-165) complete all as specified and directed. |
| 92 | M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 93 | M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 94 | S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications and drawings complete all as specified and directed. |
| 95 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing complete all as specified and directed by Eng-in-Charge. |
| 96 | Demolition of cement concrete of ground floor n exc 15 cm in depthin any position nototherwise specifically providedcomplete all as specified and directed |
| 97 | M/L 75 mm thick cement concrete 1:3:6 type C-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed |
| 98 | M&L coloured Chequered cement concrete tiles 20cm x 20cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors With Grey Cement and no pigment laid over including 15mm thick screed bedin CM 1:6 complete all as specified and directed. |
| 99 | Dismantling wall and ceiling boards(fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and directed |
| 100 | Supplied and fixed Tee grid suspension system of size 600 mm x600 mm type-1 made out of rolled framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thickof section 24 mmx25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod ,system exposed portion shall be pre painted polyster coated in off white/white in colour complete with material,fixing, jointing etc all as per manufactures instructions complete all as specified and directed |
| 101 | Supplied and fixed fibre cement coloured textured designer ceiling board 4mm thick of size 595x595 mm conforming to IS : 14862 & IS : 2380 Part-XIV fixed to timber / GI / Aluminium frame work with screws/clips complete all as per manufactures instructions complete all as specified and directed |
| 102 | Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, fixed in repair complete all as specified and directed. |
| 103 | S&F PVC Bath cabinet with mirror 18"x22"x4.25". Make: commander or equivalent complete all as specified and directed. |
| 104 | S&F in repairs chromium plated towel rack of size 24" complete all as specified and directed. Make - Jaquar or equivalent (Cat No-1181) or equivalent. |
| 105 | S&F in repair vitreous china ware EWC combined pattern complete with internal fittings as specified and directed by Engineer-in-Charge. Make : Cera of Cat Part No S101314L or equivalent in Parryware/ Hindware. |
| 106 | S&F for CP health faucet brass body with wall hook and one meter stainless steel braided rubber hose pipecomplete all as specified and directed. Cat Part No.CERA F8030301. |
| 107 | S&F vitreous china wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste couplingcomplete all as specified and directed. |
| 108 | S&F in repairs 15mm brass chromium plated bib cock with wall flange complete all as specified and directed. Make - Jaquar (Cat No- 5041) or equivalent complete all as specified and directed. |
| 109 | Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store andd rubbish off the premises complete all as specified and directed |
| 110 | M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick square/ rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in loors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match laidover and including 15mm thick screed bed in CM 1:6 complete as specified and directed. |
| 111 | M&L for light shade, vitrified tiles, 7 to 8 mmthick(minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 15mm thick screed bedding in CM (1:6) complete all as specified and directed. |
| 112 | M&L forvitrified tiles, 7 to 8 mmthick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in skirting/dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 10mm thick rendering in CM (1:4) complete all as specified and directed. |
| 113 | M&L for glazed ceramic coloured tiles of size 450mm x 350mm x 7mm/600mmx300mmx7 mm on vertical surface such as skirting, dados, risers to steps etc set &jointed in neat cementslurry and pointed inwhite or coloured cementto match the colour oftiles,over and includingrendering10mm thick in cement mortar (1:4) , complete all as specified and directed. |
| 114 | .M&L for heavy duty, exterior grade ceramic tiles (Durastone of Somany/Endura of jhonson or equivalent as approved by GE) of size 300 x300x 10mm thick, set, jointed and pointed in neat cement slurry in trades, landing with white cement and pigment over and including screed bed or bedding layer of 15 mm thick cement mortar(1:6) complete all as specified and directed. |
| 115 | M&L for 18 -20mm thick BLACK/RED(LAKHA) granite factory made bull nosed, polished (table rubbed and polished) as in jambs, wall,window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed. |
| 116 | M&L for rounding to edges of stone slabs two edge full round, such as in steps,cooking platform and other similar situation complete all as specified and directed. |
| 117 | S&F powder coated approved colour anodised aluminium partition with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame with one or more rebates including S&F 5.50 mm thick plain/tinted glass complete all as specified and directed. |
| 118 | S&F in repair 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof wall etc complete all as specified and directed. NOTE : The contractor shall deploy one SUPERVISOR and 06 labour alongwith necessary transport to collect all the complaints from MES complaint cell on daily basis (from 0900 Hrs to 1700 Hrs) in all working days and to supervise his workers/ tradesman (plumber/carpenter/masson/blacksmith) in totality. He will maintain the record of all complaints received on daily basis and summarise the stores consumed and complaints attended and give the completion to the concerned JEs. The unit rate quoted by the contractor shall deemed to include for the above provision and nothing extra shall be paid on this account.T&P for attending the jobs will be provided by the contractor. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
