Military Engineer Services-MES has published Tender For Day To Day Petty Repairs, Perodical Services, Cleaning Of Sewage Line, Manhole, Septic Tank , Drain, Foot Path , Hardstanding,Certain Misc Works In Various Bldgs At Ts Mahul Bcf And Jerrican Factory Under Ge (Nw) Mankhurd. Submission Date for this Tender is 27-04-2024. Manhole Construction Tenders in mankhurd Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 19-Apr-2024 | AMENDMENT | Other | 20-04-2024 |
| 2 | 20-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-04-2024 |
| Sl. No. | Item Description |
| 1 | Preparation of old surfaces on walls (plastered or unplastered or previously white washed) and applying one coat of white wash complete all as specified. |
| 2 | All as per item No 1 above but on ceiling. |
| 3 | Preparation of old surfaces on walls (plastered or unplastered or previously colour washed) and applying one coat of Colour wash complete all as specified. |
| 4 | Preparation of old surfaces on walls (plastered or unplastered or previously distempered ) and applying one coat of Oil bound distemper complete all as specified. |
| 5 | M & L for preparation of old wooden surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified. |
| 6 | M & L for preparation of old steel surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified. |
| 7 | M & L for preparation of old Steel surfaces of any description n.exc 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified. |
| 8 | M&L for complete removal of existing treatment by washing, rubbing down and stopping of old decorated surfaces on walls, preparation for distempering and applying two coat of oilbound distemper over a coat of primer including stopping of nails holes,cracks etc and levelling with minimum 1 mm thick white cement based wall care putty for obtaining plain surface complete all as specified and directed. |
| 9 | M & L for preparation of old surfaces for applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal rsistance, dirt resistance exterior paint of required shades(Company Depot Tinted) with silicon additives @ 1.43 litre/10sqm |
| 10 | M & L for complete removal of existing treatment and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal rsistance, dirt resistance exterior paint of required shades(Company Depot Tinted) with silicon additives @ 1.43 litre/10sqm over & including priming coat of extreior primer applied @ 0.90 litre/10 sqm over old surfaces |
| 11 | Taking down cement plaster from brick/stone masonry, walls and racking out joints, hacking for key, scrubbing down and washing with water and disposing the materialsoutsideMD land. |
| 12 | M & L for rendering 10mm thickusing polymer modified ready mix cement based plaster on the wall surfaces including finishing the surface of top layer even and smooth complete all as specified and directed make: easyplast from wall plast/readiplast from ultratech Note: The thickness of plaster specified above is minimum thickness and the quoted rates shall also deemd to be include for the provosion of dubbing of the surface if any where required and nothing extra shall be payable on this account. The rate also includes the rate of scaffolding and necessary safety measurements |
| 13 | M & L for rendering 5 mm thickusing polymer modified ready mix cement based plaster on the ceiling surfaces including finishing the surface of top layer even and smooth complete all as specified and directed make: easyplast from wall plast/readiplast from ultratech Note: The thickness of plaster specified above is minimum thickness and the quoted rates shall also deemd to be include for the provosion of dubbing of the surface if anywhere required and nothing extra shall be payable on this account. The rate also includes the rate of scaffolding and necessary safety measurements |
| 14 | M&L for15mm(10+5mm)thick in two coats polymer modified ready mix cement based plaster on the wall surfaces including finishing the surface of top layer even and smooth complete all as specified and directed make: easyplast from wall plast/readiplast from ultratech Note: The thickness of plaster specified above is minimum thickness and the quoted rates shall also deemd to be include for the provosion of dubbing of the surface if anywhere required and nothing extra shall be payable on this account. The rate also includes the rate of scaffolding and necessary safety measurements |
| 15 | M&L for preparation of new plastered surfaces on walls, preparation for distempering and applying two coat of oilbound distemper over a coat of primer including stopping of nails holes,cracks etc and 1 mm thick (minimum) white cement based wall care putty onold surfaces of wallsetc, finished even and smooth, complete all as specified and directed. |
| 16 | Preparation of new plastered surfaces on wallsand applying three coat of white wash complete all as specified. |
| 17 | All as per item No 16above but on ceiling |
| 18 | M & L for preparation of new plastered surfaces on walls, preparation for Acrylic emulsion and applying applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal rsistance, dirt resistance exterior paint of required shades(Company Depot Tinted) with silicon additives @ 1.43 litre/10sqm over & including priming coat of extreior primer applied @ 0.90 litre/10 sqm over new surfaces |
| 19 | M&L for writing letter, alphabets or figures (Block, Roman, Italic or Indian) n.exc 30 cm high with synthetic enamel paint all as specified. |
| 20 | M&L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour including necessary scafolding height upto 24m complete all as directed. |
| 21 | M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface over one coat of primer and minimum1 mm thick white cement based wall care putty complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. |
| 22 | M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. Note for Item No 1 to 10 above (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b.) The contractor shall upload along with the documents under cover-I, ‘Memorandum of Understanding’ (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected. |
| 23 | Chipping , Removing,Carefullly Loose Concrete work by low impact Hammer/Breakar without damaging the structure & cleaning and disposal of malba out side the premises etc. complete as directed. Hard concrete should not be removed by force. |
| 24 | 1)M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner" of "Pidilite" OR "Shali Rustoff" of "STP Ltd", on rebars with time interval of 1 hr between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.) 2)M&L for Anticorrosive Treatment to Reinforcementusing Corroseal - ZR of M/s Krishna Conchem orEpoxy Zinc Primer of M/s. Dr. Fixitby application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat.The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces, complete all as specified and directed. |
| 25 | Providing and fixing additional steel bar in various structural elements like column ,beams and Slab etc. including drilling ,bending and fixing the bars tying with preleft binding wires etc. |
| 26 | M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchemas approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete& new concrete by brush application, complete all as specified and directed. |
| 27 | M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit upto 40mm thickness including levelling, profiling etc in two layers,each layer not exceeding 20mm, complete all as specified and directed. |
| 28 | M&L for removal of plant growth by injection with chemical glyphospate solution ( 4% concenteration) of 20ml or till refuse by cutting or injecting in stem of plants or roots at 30 mm.The area shall then be sprayed with solution 25ml glyphosphate( 4% concent) complete all as specified. |
| 29 | M&L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour including necessary scafolding height upto 24m complete all as directed. |
| 30 | M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface over one coat of primer and minimum1 mm thick white cement based wall care putty complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. |
| 31 | M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. Note for Item No 1 to 10 above (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b.) The contractor shall upload along with the documents under cover-I, ‘Memorandum of Understanding’ (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected. |
| 32 | Demolition cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level). |
| 33 | Dismantling of brick work /stone boulders built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. |
| 34 | M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation and paving etc complete all as specified & directed. |
| 35 | M & L Pre-cast cement concrete block masonry with solid blocks Type C1 1:3:6, exc. 10 cm in width and setting in Cement mortar (1:6) mortar, complete. |
| 36 | Ditto--- All as per item No 35 above but except PCC blocks |
| 37 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, as in wall etc complete all as specified & directed. |
| 38 | Ditto All as per item No 37 but except stone |
| 39 | Extra over stone walling for hammer dressing to face stones with maximum depression on fairface from straight edge held against the dressed surface not exceeding 40 mm for granite or trap stone of face beds & joints as specified of random rubble walling uncoursed or brought up to course complete all as specified |
| 40 | M& L for raised pointing to random rubble masonry uncoursed or brought up to courses in CM 1:3 , complete all as specified& directed. |
| 41 | M & l for plain Cement concrete Type B-1 1:2:4 (using 20 mm graded stone aggregate) as in surface channels and drains |
| 42 | M & L Broken glass coping on top of walls in CM 1:3 including demolition of old coping and preparation of surface complete |
| 43 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portionof concrete and making good disturbed in ground. |
| 44 | S & F in repair mild steel work as in posts or struts of fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, including all necessary drilling, bolting or riveting etc conforming to Fe- 290 Gde E-165 including dismantling of old posts with embeded portion, cleaning and surface preparation etc. |
| 45 | M & L for cement concrete 1:3:6 type C-1, using 20mm grade stone aggregate as in coping, bed blocks and the like including weathering slightly rounded or chamfered and throating as directed including necessary formwork complete all as specifiedand directed. |
| 46 | S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 - S, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete including dismantling of existing old framed work of any description |
| 47 | S&F in repairsFramed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 |
| 48 | M&Lin repairsfor PVC coated galvanised chain link fencing of wire mesh size 50 mm x 50 mm x 3 mm weighing not less than 2.18 kg/sqm (weight inclusive of PVC coat) and PVC coated line wire etc including fixing line wire to angle iron posts / rails straining bolts with provision of binding wire etc complete all as specified |
| 49 | S&Fsteel screws bolts (Machine made) made hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with one hexagonal or square nut , exc 5 cm but n exc 10 cm long dia of shank 5 to 10 mm complete all as specified and directed. |
| 50 | Supply and fix Round bars 10 mm dia for securing chain link fencing complete all as specified and directed. |
| 51 | S & F Camouflage painted concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, spring core wire (2.5 mm thick) of high with tape (0.52mm thick) and fixing the same over existing Y-shape angle iron tied with G.I.staple and G.I.clips to retain horizontal, including necessary bolts , all complete. |
| 52 | S & Fin repair camouflage painted galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbsstraining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provn of galvanised mild steel wire, staple or steel pins etc complete all as specified and directed. |
| 53 | M & L forready mix cement concrete M-30 for flooring , including provision of necessary formwork and broom finishing the surfaces without using extra cement complte all as specfied below and directed :- Note :Flooring concrete shall be laid in panels not exceeding 12 Sqm each. |
| 54 | Forming 12mm thick construction joints30mm x 10mm primed and sealed with sealing compound, Grade `A" |
| 55 | Forming Contraction (Dummy) joint 30mm deep x 10mm wide filled with sealing compound Grade "A" |
| 56 | Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 57 | M&L for two coats synthetic enamel paint over one coat of red oxide primerof any description not other wise described over 10 cm width or girth including preparation of new or previously untreated steel surfaces. |
| 58 | All as per item no. 57 above but one coat of painting on old painted steel surfaces including preparation. |
| 59 | M & L labour75mm thick PCC 1:4:8 type C-2 using 40 mm graded aggregate as in sub base & sub floorcomplete all as specified and as directed.. |
| 60 | M&L Machine pressed precast concrete interlocking paver block Coloured any shape and size confirming to IS 15658-2006 of 60mm thickness, with grey cement and pigmentM-35 Grade complete all as specified |
| 61 | M & L for sandcushioning for paver bocks complete including spreading ramming levelling and watering all as specified |
| 62 | M& LPre Polished Chequeredcement concrete tiles 30cmx 30 cm x 20-25 mm thick, set, jointed and pointed in near cement slurry in floors with mixture of grey white cement in equal proportions over screed bed or bedding layer of mortar 20 mm in cement mortar 1:6 complete all as specified and as directed. |
| 63 | Excavation in trenches, not exceeding1.5m wide and n.exc 1.5m in depth for sewage line and getting out in any type of soil. |
| 64 | M & L for plain cement concrete 1:3:6 type C2 (using 40mm graded agg)as in bed to drain pipe, 150mm bore including packing under and haunching against the sides of pipes after they are laid and testedincluding necessary shuttering and supports to concrete |
| 65 | M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars 150 mm dia |
| 66 | Returning, filling including spreading, leveling watering and well ramming in layers n.exc 25cm in hard/dense soil complete all as specified and directed by Engr-in-Charge.. |
| 67 | Removing excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge. |
| 68 | Cleaning manhole of size n.exc 1.50 Sqm by taking out sludge in semiliquid/solid stage (incl. all water etc) from inside of manhole of depth not exceeding 1.5 m and removing the sludge to a distance not exceeding 50m depositing in trenches including supply and sprinkling bleachingpowder and covering sludge with earth to a thickness not less than 30 cm including all earth work, returning filling, removal of surplus soil & necessary temporary cleaning and necessary safety measures such as gas mask, use of safety belt etc as directed by the Engineer-in-Charge. |
| 69 | Opening cover of manhole/septic tank exc 1.5 m depth, dewatering and pumping outnight sludge etc from septic tank by mechanical means and removing sludge outside MD land and cleaning the septic tank as per BMC rules and placing the cover inoriginal position taking all precautionary and safety measuresall as directed. Note: All T&P and transportation for carrying sludgeshall be provided by the contractor at their own cost. |
| 70 | Labour for cleaning /clearing of blockage of gully traps, floor traps, vertical and horizontal soils/ waste pipe of different diaand sewage lines( PVC/SGW/ CI/RCC of any dia) except cleaning of manholes including opening inspection eye door of bend/ branch pieces, rodding till smoothflow and refixing of door after cleaning and any other cleaning work as directed by Engr-in-chargein thearea of the TS Mahul under GE (NW) Mankhurd Note: (a) Contractor"s labourwill report daily at 0845 hrs on all working days at online complaint cell centre and attend complaints given by Engr -In- Charge . Complaints needs to be cleared within 24 hrs after receiving the complaints . The contractor will deploy requisite labour and supply all T&P ( mechanical Iron rods, knot ropes , bamboo etc) scaffolding ladders and necessary safety measures such as gas mask, use of safety belt and cell torch etcand any other materials required to clear the blockages at the site without any extra cost . In case any labour does not report to Engineer In Charge for the whole day or found missing more than half an hour on any day, Panel recovery @ RS.860/- per head per day shall be made proportionally from contractor"s dues. b) The above item includes conveyance cost of labour with their tools to travel from one area/location to other area/location to attend complaints, plugging of sewer and diverting flow of sewage if necessary to carry out the work and removal of sludge from the siteto outside MOD land (The department shall not be liable to provide any kind/form of transportation to the labour). (c) Registers of labour attendance and complaints shall be maintained by contractor at their own cost,which shall be kept in the custody of MES Department(complaint cell) duly signed by contractor"s representative ,JE(civil) and Engineer in charge. |
| 71 | Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc. |
| 72 | M & L for brick work with subclass "B" bricks straight or curved on plan exceeding 6mtr mean radius built in CM 1:6 complete all as specified. |
| 73 | M&L for 15mm thick rendering (10+5mm) consisting of 5mm thick in CM 1:4 with water proofing compound (water proofing compound shall be used as per manufacturers instructions) over a coat of 10mm thick in CM 1:6 over brick or concrete surfaces finished even and fair. |
| 74 | M & L for cement concrete 1:2:4 , type B-1 (using 20mmgraded stone aggregate) as inin lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like in surface benching including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work. |
| 75 | M & L for precast reinforced cement concrete 1:2:4 type B-1(20mm graded agg) as in cover slab for manholes/drainage etc, set in cm 1:6 including necessaryform work all as specified and directed. (Note :- Reinforcement shall be measured and paid separately). |
| 76 | S & F for Tmt bars 10 mm dia and over, cut to length, bent to shape required including mild steel wire (annealed) not less than 0.9mm dia complete all as specified. |
| 77 | Supply only intergal water proofing compound. (ISI marked). |
| 78 | M & L for PCC type C2 1:3:6 using 40 mm graded aggregate as in foundation, filling and mass concrete |
| 79 | Removal of plant growth from wall/roof projection or along the soil /rain water down pipe at any level by injection with chemical Glyphospate solution (410 concentration) of 20mm or till rufuse by cutting or injection in stem of plants or roots at 20m inclding scafolding upto any ht. |
| 80 | M/L PCC 1:3:6 type C1 solid block masonryexceeding 10 CM width set in CM 1:6 |
| 81 | Mild steel work such as rungs,handles |
| 82 | Extra forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms,moulds,mitred/stopped ends. |
| 83 | Demolition of stone slab and tiles of any size and description or thickness in floors laid bedded and pointed in any mortar including screed bed. |
| 84 | Demolition of PCC (unreinforced) in ground floor and pavings n.exc 15 CM thick and clearing of premises. |
| 85 | Taking down cement plaster on brick/stone or concrete surfaces including hacking for key , scrubbing down with water etc complete |
| 86 | Dismantling water tanks and removing of premises of capacity exc 250 ltr and n.exc 500 ltr |
| 87 | Taking down Chowkat with Shutter (Without taking down shutters from the Frame) exceeding 1.5 Sqm and not exceding 4 Sqm |
| 88 | Taking down chowkat with shutter without taking off shutters from the frame n.exc 1.5 Sqm |
| 89 | Taking down PVC (SWR)/CI/ACpipe fixed to wall or laid in trenches in any dia |
| 90 | M&L for 12 mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing surfaces even and smooth, complete all as specified and diected Make: Easy Plast from M/s wall plast or chemplast or readyplast from Ultratech Note:The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with ready mix plaster and nothing extra shall be payable on this account. |
| 91 | M&L for 15 mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing surfaces even and smooth, complete all as specified and diected Make: Easy Plast from M/s wall plast or chemplast or readyplast from UltratechNote:The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with ready mix plaster and nothing extra shall be payable on this account. |
| 92 | S&F for PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement |
| 93 | Taking up or down steel water tubing and connections of size 15mm bore, complete all as specified and directed. |
| 94 | Taking up or down steel water tubing and connections of size 20mm bore, complete all as specified and directed. |
| 95 | Taking up or down steel water tubing and connections of size 25mm bore, complete all as specified and directed. |
| 96 | S&F tubes medium grade 15mm dia, galvanised with all fittings and fixed complete to walls and ceilings or laid to floors |
| 97 | Supply & fixing 20mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed. |
| 98 | .- Ditto- ALL as per item no97above but fixing only |
| 99 | Supply & fixing 25mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed. |
| 100 | S&F for PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement |
| 101 | Labour only for Cutting chases pinning in making good to facing where required and pointing in CM (1:4) to end of edges of shelves lintels etc. and cutting chases for concealed water tubing and making good cutting not exc 10cm girth |
| 102 | M&L for providing and fixingtoilet fittings Make : Jaquar Essco fixed in repairs a) Bib cock with wall flange 15mm dia Model no DLX-511KN |
| 103 | b) Pillar cock 15mm dia Model no DLX-507KN |
| 104 | c) Angular stop cock15mm dia Model no DLX-526NKN |
| 105 | d) Two way Bib cock with flange 15mm dia Model no DLX-512ANKN |
| 106 | S&F Chromium plated Towel rod 600mm long including built in side brackets Model no AEC-1111N |
| 107 | S&F Chromium plated Toilet paper holder Model no AEC-1151N |
| 108 | S&F Chromium plated Towel ring Model no AEC-1121N |
| 109 | S&F Chromium platedSoap dish Model no ACN-1131N |
| 110 | S&F30 cm corner glass shelve 12mm thick with"D" bracket suitable for shelves Model no ACN-1173 |
| 111 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 112 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to b fitted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cwement, supplying & fixing the frame at site. |
| 113 | S&F Stainless steel Butt hinges 100mm long with mild steel hinge pin, bright polished and fixed, complete all as specified |
| 114 | S&F aluminium anodized extruded sections handle 150mm long |
| 115 | S&F aluminium anodized extruded sections barrel tower bolt 150mm long |
| 116 | S&F aluminium alloy anodized sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 300mm long |
| 117 | Cutting into existing manhole for connecting new drains making good to pipe and rendering cutting out existing benching for and forming channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required internal dia of pipe 100mm maximum |
| 118 | M&L for PVC (SWR) pipes single socketed in any length with rubber ring joints laid intrenches or floors 110 dia. |
| 119 | All as per Item No. 118 abovebut 75mm dia |
| 120 | M&L PVC (SWR) pipes single socketed in any length with rafter joints fixed wall 110mm dia |
| 121 | All as per Item No. 120 abovebut 75mm dia |
| 122 | M&L for PVC (SWR) bends any radius of 110mm dia |
| 123 | All as per Item No. 122 abovebut 75mm dia |
| 124 | M&L for PVC (SWR) bends any radius of 110mm dia providedwith access door |
| 125 | All as per Item No. 123 abovebut 75mm dia |
| 126 | M&L PVC (SWR) branch piece single Y equal or unequal of 110mm dia providedwith access door |
| 127 | All as per Item No. 126 abovebut 75mm dia |
| 128 | M&L PVC (SWR) branch piece double Y double socketted of 110mm dia bore provided with access door |
| 129 | All as per Item No.128 abovebut 75mm dia |
| 130 | M&L PVC (SWR) Junction single, (Single T) equal or unequal of 110mm dia bore provided with access door |
| 131 | All as per Item No. 130 abovebut 75mm dia |
| 132 | M&L for PVC (SWR) vent cowl of 110mm dia |
| 133 | All as per Item No. 132 abovebut 75mm dia |
| 134 | M&L Coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm and not exceeding 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over 15mm thick screed bed in CM 1:4 |
| 135 | M/L Coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting dados etc over backing coat 10mm thick in CM 1:3. |
| 136 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity 500 Ltrcomplete fixed to pipe etc all as directed |
| 137 | M&L ball brass valves high pressure with polyuthene float valve and fly nutcomplete screwed for iron pipe or brass ferrule and fiexed in repairsFloat valve 20mm |
| 138 | S&F Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed in repairs 20mm bore |
| 139 | M/L75 mm thick Cement Concretein sub base of floors type D-2, PCC 1:4:8 ( 40mmgraded aggregate ) |
| 140 | M&L for colouredParking tiles, heavy duty of size 300x300x10 mm thick,set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the colour of the tiles, over and including 15mm thick cement mortar screedbed in CM 1:6, complete all as specified and directed.Make : JOHNS0N /SOMANI/ORIENT BELL/KAJARIA. |
| 141 | Taking down chowkats or frames with shutters not exc 1.50 Sqm each (without taking off shutters from the frames). |
| 142 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) |
| 143 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 144 | M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 |
| 145 | S&Fbutt hinges, mediumweight cold rolled mild steel, size 100mm |
| 146 | S&F extruded aluminium alloy handles, fabricated type., anodised,150 mm |
| 147 | S&F aluminium, anodised, barrel tower bolts of extruded section and fixed 150 mm |
| 148 | S&Faluminium alloy, anodised, slidingdoor bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixedd nuts, four on bolt plate and two on staple plate and fixed,300mm complete. fixed in repairs |
| 149 | S&F aluminium, anodised, barrel tower bolts of extruded section and fixed 150 mm fixed in repairs |
| 150 | S&F aluminium, anodised, barrel tower bolts of extruded section and fixed 100 mm fixed in repairs |
| 151 | S&Faluminium alloy, anodised, slidingdoor bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixedd nuts, four on bolt plate and two on staple plate and fixed,250mm complete. fixed in repairs |
| 152 | S&Faluminium alloy, anodised, slidingdoor bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixedd nuts, four on bolt plate and two on staple plate and fixed,300mm complete. fixed in repairs |
| 153 | S&Fbutt hinges, mediumweight cold rolled mild steel, size 100mm fixed in repairs |
| 154 | S&Fbutt hinges, mediumweight cold rolled mild steel, size 75mm fixed in repairs |
| 155 | S&F extruded aluminium alloy handles, fabricated type., anodised,150 mm fixed in repairs |
| 156 | S&F extruded aluminium alloy handles, fabricated type., anodised,100 mm fixed in repairs |
| 157 | S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples,fixed in repair |
| 158 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads |
| 159 | Supply and fixing 4 mm thick plain sheet glass, ordinary quality with and including provision of beading for joinery complete all as specifiedand directed. Note: A sum of Rs 27,007.00 towards sch of credit shall be deducted to arrive the contract sum |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
