Military Engineer Services-MES has published Tender For Repair/Resurfacing Of Roads And Road Furniture At Naval Park, Amzari Park, Ins Virbahu, Ins Satavahana And Ge Office Premises Area Of Age B/R-I Under Ge (Nb) Visakhapatnam. Submission Date for this Tender is 04-05-2024. Road Work Tenders in visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 19-Apr-2024 | Other Corrigendum | Other | 27-04-2024 |
| 2 | 19-Apr-2024 | BOQ CORRIGENDUM | BOQ | 27-04-2024 |
| 3 | 27-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-05-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as directed. |
| 2 | Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in Soft / Loose soil complete all as specified and as directed. |
| 3 | Removal of excavated material [Soil] to a distance exceeding 5 KM and not exceeding 5 KM and depositing where directed at a level not exceeding 1.5 m complete all as specified and as directed. |
| 4 | M & L for pre cast cement concrete 1:2:4, Type B-1, using 20 mm graded stone aggregate as inkerbs, Coving etc including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 5 | M & L for Moorum / Red Bajri filling under Floors or in Pavings laid in layers not exceeding 15 cm thick, spread levelled and rammed / rolled with power road roller of 8 to 12 ton capacity including watering to and consolidated to required level, gradient and camber required complete all as specified and as directed. Note:Measurements shall be taken after consolidation of earth and 10% deduction shall be made for payments. |
| 6 | M & L for bituminous macadam not exceeding 75 mm thickness (compacted thickness) using hot mix plant and mechanical paver with 4% binder (paving grade bitumen VG-30 grade) content by weight of total mix, rolled and compacted with power roller 8 to 10 tonnes to required camber and gradient complete all as specified and as directed. Note :- (i) Bituminous macadam shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper. (ii) The exact bitumen content required shall be determined as per IRC 27: 2009. The adjustment in rate due to variation in quantity of bitumen if any shall be priced at the rate of ?44 per kg. |
| 7 | M & L for Preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all dirt etc. and applying evenly a priming / tack coat with bituminous primer at 5 KG per 10 Sq.m of paving bitumen of grade VG-30 complete all as specified and as directed. |
| 8 | M & L for laying Bituminous Premixed Semi Dense Asphaltic Concrete, 40 mm consolidated thickness, using paving bitumen of Grade VG – 30, with 5.5% of binder content by weight of total mix using Hot Mix Plant and Mechanical Paver, rolled and compacted with power road roller of 8 to 12 ton capacity to required camber and gradient complete all as specified. Note: Minimum Bitumen content shall be 5.5% as specified here in above. Please note that if the actual quantity of bitumen to be incorporated on approval of Mix–Design is found more than the minimum bitumen content specified above, No price adjustment shall be made for actual bitumen content of Mix–Design. Bitumen shall be Paving Bitumen of Grade VG–30 and shall be procured by the contractor. |
| 9 | M & L for repairs to Pot Holes exceeding 30 mm depth and not exceeding 1.00 Sq.m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc, cutting around edges to at least 25mm depth, making good by applying tack coat with bituminous primer at 5 Kg per 10 Sq.m, putting in premixed bituminous macadam, rolled and consolidated with power road roller of 8 to 12 ton capacity and sealed with binder 9.8 kg per 10 sq.m, blinded with 0.09 cu.m of stone chippings, 6.3mm size and again rolled and consolidated with power road roller of 8 to 12 ton capacity including supply of premixed macadam, binder and chippings complete all as specified and as directed. |
| 10 | M & L for Road Marking Strips, Lines, Dashes, Arrows, Letters etc of 2.5 mm thick [Reflective Type] of colour White or Golden Yellow on roads, pavements and the likeexceeding 10cm wide with Hot Thermo Plast material by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe heater, driven by skilled operator on road surface complete as per MOSRT & H specifications including cleaning the road surface of all dirt, scales, oil grease and foreign materials etc complete all as specified and as directed. |
| 11 | S & F in repairs Solar Road Studs [Bi-Directional] made of Aluminium Die cast matt finish of size 125 X 125 X 30mm [Approximately], working on High Efficiency Mono-Crystalline Solar Panel 2.4 V / 0.3 Watt, One Ni-Mh or NI-cd Rechargeable Battery [1.2V / 1600 MA] with Six Super Bright LEDs with 10,000 to 18,000 mcd [Millicandela], with a minimum Operating time of 3-4 consecutive days with full charge, viewing distance / visibility not less than 800m with 2 Hz Flash Rate, Self operated from Dusk to Dawn, anti twist ribs on the bottom anchor / shank with high intensity reflective grade polymer sticker and conforming to IS - 12063, of Colour yellow or red or blue or green or white as approved by GE complete all as specified and as directed. |
| 12 | S & F in repairs Road Stud, Two way reflective of size 100mm X 110mm X 20 mm [Approximately], ABS body with high intensity grade retro reflective panel of Amber, Red or White colour conforming to IRC - 67, fixed with complete all as specified and as directed. |
| 13 | S & F in repairs Road Side Flexible Delineator [Reflector] as per approved model and conforming to IRC - 67, made of highly flexible material [restores back to their erect posture even after being hit by a speeding vehicle without damaging them], fitted with 100mm PMMA reflector, which emit excellent reflection during night time, overall height of the reflector shall be of 1300mm with 3 reflective strips of colour Amber, Red or White, as approved by GE with 200mm dia base, 75mm dia pole, fixed with Bolts, Nuts and Epoxy Glue complete all as specified and as directed. |
| 14 | S & F in repairs Road Side Delineator [Reflector] as per approved model and conforming to IRC - 67, made of Powder Coated MS Pipe, 50mm bore, 1000mm height, Heavy Grade, fitted with 2 Nos. of 100mm dia highly reflective reflectors made of PMMA Material with ABS Round Body, anti rust & anti theft steel net, fixed with Bolts, Nuts and Epoxy Glue, which emit excellent reflection during night time, with 3 reflective strips of colour Amber, Red or White, as approved by GE and duly embeded in PCC 1:2:4, Type B1 of suitable size fixing MS Post and earthwork etc. complete all as specified and as directed. |
| 15 | S & F in repairs Median Marker / Guard Rail Reflectors and conforming to IRC - 67 with metal base of size 114 X 117 mm with highly reflective reflectors made of PMMA Material with ABS Round Body fixed with Bolts, Nuts and Epoxy Glue on the side of crash barrier for perfectly delineating the road direction for night driving complete all as specified and as directed. |
| 16 | S & F in repairs Speed Bumps / Speed Breakers conforming to IRC - 67 of size 500 X 365 mm, 50 mm high the material shall be Black/Yellow coloured and UV stabilised to keep perpetually colorful, Studded with reflectors on either side for clear visibility during night hours, fixed with nails supplied with the Bumps, grouting the holes with appropriate epoxy adhesive on the road surface and Bumps complete all as specified and as directed. |
| 17 | S & F in repairs Poly Carbonate Convex Mirror outdoor type 800mm dia made out of fibre along with bracket, Pole mounted and fixed to 80mm bore Medium Grade MS Pipe of required length complete and embedded in PCC 1:3:6, Type C1, including necessary earth work required for post holes complete all as specified. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
