Military Engineer Services-MES has published Tender For Repair/Maintenance Of Lt Infrastructure, Pumping System, Switchgear, Pipelines And Connected Works Under Ge (Utilities) Udhampur.. Submission Date for this Tender is 27-04-2024. Switch Gear Tenders in udhampur Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-Apr-2024 | BOQ REVISED | BOQ | 20-04-2024 |
| 2 | 20-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-04-2024 |
| Sl. No. | Item Description |
| 1 | Excavation in trenches for Taking out / Laying HT/LT U/G Cable in any type of hard/ dense soil not exceeding 1.5 m wide and not exceeding 1.5m in depth and getting out complete all as specified and directed by Engr-in-Charge. |
| 2 | M&L for dry sand cushioning to underground cable provided with layer of 8cms thickbefore laying the cable and 15cms thick after laying and stretching the cable and punned to 18 cm thick complete all as specified and directed by Engr-in-Charge. Note: Only punned thickness shall be measured for payment purpose. |
| 3 | Supply and lay PCC cable cover class LVtype 2 flat size 300 mm x 180 mm x 40 mm complete all as specified and directed by Engr-in-Charge. |
| 4 | Returning, filling, levelling, spreading, watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed by Engr-in-Charge. |
| 5 | Removing surplus soil not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge. |
| 6 | M&L for replecement Air circuit breaker, 1600 Amp rating, 4 Pole, 415 Volts, manual drawout type with microprocessor release of capacity 1600 Amps. Complete all as specified and directed by Engr-in-Charge. |
| 7 | M&L forservicing/callibration /Repair toAir circuit breaker,1600 Amp by OEM OF ACB only forEDO ( Electrically Draw out type/MDO type ( Mannually Draw out type).Taking out ACB for servicing/repair and checking/callibration of microprosser release ,Earth fault protection of 4 pole,50 KA breakingt capacity 415 volts with all draw out type mechanism,advanced self powered electronic protection units,neutral overload protection.automatic earth fault relay/over current relay,automatic safety shutter,inbuild temperature protection.icu=ics=icw(1s)=50 Ka fixed in panel complete including relay wiring checking,LT UG cable connection for its healthy functioning complete all as specified and directed by Engr-in-Charge. Note- Certificate of Servicing /callibration will be providded by the contractor free of cost |
| 8 | S&F in repair shunt release for air circuit breakers microprosser based type suitable for existing breakers as per site make/requirement including taking out breakers after taking shutdown of electric supply complete all as specified and as directed by Engr-in-Charge. |
| 9 | S&F in repair under voltage release for air circuit breakers microprocessor based type suitable for existing breakers as per site/requirementincluding taking out breakers after taking shutdown of electric supply complete all as specified and as directed by Engr-in-Charge. |
| 10 | S&F in repair earth fault release for air circuit breakers microprocessor based type suitable for existing breakers as per site/requirementincluding taking out breakers after taking shutdown of electric supply complete all as specified and as directed by Engr-in-Charge. |
| 11 | S&F in repair lockable trip push button for air circuit breakers microprocessor based type suitable for existing breakers as per site/requirementincluding taking out breakers after taking shutdown of electric supply complete all as specified and as directed by Engr-in-Charge. |
| 12 | S&F in repair Racking padlock assembly for air circuit breakers microprocessor based type suitable for existing breakers as per site/requirementincluding taking out breakers after taking shutdown of electric supply complete all as specified and as directed by Engr-in-Charge. |
| 13 | M&L forservicing/callibration /Repair toAir circuit breaker,800 Amp by OEM OF ACB only forEDO ( Electrically Draw out type/MDO type ( Mannually Draw out type).Taking out ACB for servicing/repair and checking/callibration of microprosser release ,Earth fault protection of 4 pole,50 KA breakingt capacity 415 volts with all draw out type mechanism,advanced self powered electronic protection units,neutral overload protection.automatic earth fault relay/over current relay,automatic safety shutter,inbuild temperature protection.icu=ics=icw(1s)=50 Ka fixed in panel complete including relay wiring checking,LT UG cable connection for its healthy functioning complete all as specified and directed by Engr-in-Charge. Note- Certificate of Servicing /callibration will be providded by the contractor free of cost. |
| 14 | S&F in repair shunt release for air circuit breakers microprosser based type suitable for existing breakers as per site make/requirement including taking out breakers after taking shutdown of electric supply complete all as specified and as directed by Engr-in-Charge. |
| 15 | S&F in repair under voltage release for air circuit breakers microprocessor based type suitable for existing breakers as per site/requirementincluding taking out breakers after taking shutdown of electric supply complete all as specified and as directed by Engr-in-Charge. |
| 16 | S&F in repair earth fault release for air circuit breakers microprocessor based type suitable for existing breakers as per site/requirementincluding taking out breakers after taking shutdown of electric supply complete all as specified and as directed by Engr-in-Charge. |
| 17 | S&F in repair lockable trip push button for air circuit breakers microprocessor based type suitable for existing breakers as per site/requirementincluding taking out breakers after taking shutdown of electric supply complete all as specified and as directed by Engr-in-Charge. |
| 18 | S&F in repair Racking padlock assembly for air circuit breakers microprocessor based type suitable for existing breakers as per site/requirementincluding taking out breakers after taking shutdown of electric supply complete all as specified and as directed by Engr-in-Charge. |
| 19 | Servicing and repair/maintenance of APFC 100 to 300 KVR Panel board & checking connections between load dives and sensing devices else where located in separate panel to check sequence of supply and set in proper condition including removal of defective device such as CT sencing cable and power cable,repair replacement of fuses,fuse link,control fuses,push button,LED indicator,auto manual selector switch,current transformer,and checking/replacing cable lugs,patch work welding,replacement of defective door hinges and testing of capacitor panel obtaining in board power factor to 0.95 to 0.98 of following capacities capacitor panel complete all as specified and directed by Engr-in-Charge. Note: Replacement of major items will be measured and paid seperatly. |
| 20 | MCCB 600 Amp as per existing complete all as specified and directed by Engr-in-Charge |
| 21 | Capacitor cylindrical type suitable for 3 phase 440 volt 50HZ 10 kvar complete all as specified and directed by Engr-in-Charge |
| 22 | Capacitor cylindrical type suitable for 3 phase 440 volt 50HZ 25 kvar complete all as specified and directed by Engr-in-Charge. |
| 23 | Capacitor cylindrical type suitable for 3 phase 440 volt 50HZ 50 kvar complete all as specified and directed by Engr-in-Charge. |
| 24 | S&F APFC relay of existing size and capacity suitable from 6 to 12 steps complete all as specified and directed by Engr-in-Charge. |
| 25 | S&F APFC Contector 4 pope with AC coil (9A-95A) as per existing size and capacity suitable from 6 to 12 steps complete all as specified and directed by Engr-in-Charge. |
| 26 | M&L for replacement on/off load change over switch 400 Amps 4 pole415 Volt AC 50 Hz conforming to IS:13947, open execution as per existing panel board sizeincluding taking down old unserviceableone complete all as specified and directed by Engr-in-Charge. |
| 27 | M&L for replacement on/off load change over switch 630 Amps 4 pole415 Volt AC 50 Hz conforming to IS:13947, open execution as per existing panel board sizeincluding taking down old unserviceableone complete all as specified and directed by Engr-in-Charge. |
| 28 | M&L in replacement of aluminium lugs suitable for 630 Sqmm aluminium cable including taking down the existing unserviceable one complete all as specified and directed by Engr-in-Charge. |
| 29 | M&L in replacement of aluminium lugs suitable for 400 Sqmm aluminiumcable including taking down the existing unserviceable onecomplete all as specified and directed by Engr-in-Charge. |
| 30 | M&L in replacement of aluminium lugs suitable for 300 Sqmm aluminiumcable including taking down the existing unserviceable onecomplete all as specified and directed by Engr-in-Charge. |
| 31 | M&L in replacement of aluminium lugs suitable for 240 Sqmm aluminiumcable including taking down the existing unserviceable onecomplete all as specified and directed by Engr-in-Charge. |
| 32 | M&L in replacement of aluminium lugs suitable for 185 Sqmm aluminiumcable including taking down the existing unserviceable onecomplete all as specified and directed by Engr-in-Charge. |
| 33 | M&L in replacement of aluminium lugs suitable for 120 Sqmm aluminiumcable including taking down the existing unserviceable onecomplete all as specified and directed by Engr-in-Charge. |
| 34 | M&L in replacement of aluminium lugs suitable for 95 Sqmm aluminiumcable including taking down the existing unserviceable onecomplete all as specified and directed by Engr-in-Charge. |
| 35 | S&F in replacement copper tube (Thimbles) terminal heavy dutyof size 95 Sqmm complete all as specified and directed by Engr-in-Charge. |
| 36 | S&F in replacement copper tube (Thimbles) terminal heavy dutyof size 120 Sqmm complete all as specified and directed by Engr-in-Charge. |
| 37 | S&F in replacement copper tube (Thimbles) terminal heavy dutyof size 185 Sqmm complete all as specified and directed by Engr-in-Charge. |
| 38 | S&F in replacement copper tube (Thimbles) terminal heavy dutyof size 240 Sqmm complete all as specified and directed by Engr-in-Charge. |
| 39 | S&F in replacement copper tube (Thimbles) terminal heavy dutyof size 300 Sqmm complete all as specified and directed by Engr-in-Charge. |
| 40 | S&F in replacement copper tube (Thimbles) terminal heavy dutyof size 630 Sqmm complete all as specified and directed by Engr-in-Charge. |
| 41 | Supply, laying, jointing & testing XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 95 sqmm 3.5 core as laid in trenches, passing through pipes, ducts complete all as specified and directed by Engr-in-Charge. |
| 42 | Supply, fabricate, erect , connect, test and commissoning of factory made, CPRI approved, cubical type, indoor type LT panal board of size 1500x1200x600mm,totally enclosed , dust, weather and vermin proof 1100 Volt grade , 50Hz, AC supply made out by 3.15mm thick CRCA sheet steel for load bearing and 2 mm thick for non load bearing, fully compartmentalised, with IP 65 protection all as per conferming to IS 2417 of 1962 complete including the following accessories housed complete all as specified and directed by Engr-in-Charge. (a) MCCB 400 Amp 50 KA four pole 415 volt ( Incomer). (b) Indicator (RYB) I set. (c) Contector 400 Amp (d) Bus bar 800 Amp with CT&PT. |
| 43 | Supply, fabricate, erect , connect, test and commissoning of factory made, CPRI approved, cubical type, indoor type LT panal board of size 1000x800x450mm,totally enclosed , dust, weather and vermin proof 1100 Volt grade , 50Hz, AC supply made out by 3.15mm thick CRCA sheet steel for load bearing and 2 mm thick for non load bearing, fully compartmentalised, with IP 65 protection all as per conferming to IS 2417 of 1962 complete including the following accessories housed complete all as specified and directed by Engr-in-Charge. (a) MCCB 63 Amp 25 KA four pole 415 volt -01(b) MCCB 40 Amp 25 KA four pole 415 volt -02 (c) DOL Starter 15 HP-02 (d) Indicator (RYB) I set.(e) Bus bar 200 Amp with CT&PT. |
| 44 | Supply and fixing LED street light fitting 25/35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-Charge. |
| 45 | S&F in repair LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge. |
| 46 | S&F in replacement of power contactor 4 pole with AC coil AC-3 duty rating at 415 Volts 50 Hz, frame size1 suitable for 270 HP centrifugal pump set as per Havells cat part No. IHPAC330400* complete all as specified and directed by Engr-in-Charge. |
| 47 | S&F in replacement of power contactor 4 pole with AC coil AC-3 duty rating at 415 Volts 50 Hz, frame size1 suitable for 170 HP centrifugal pump set as per Havells cat part No. IHPAC115100* complete all as specified and directed by Engr-in-Charge. |
| 48 | Supply and fixing LED Flood light fitting 125 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-Charge. |
| 49 | Servicing of crane capacity 3 Ton, Tawi Jack well Hight lift Pump House & Tawi filter pump House. Servicing deems to be including the following process:- (a) Dismantling the main driving shaft of forward/reverse drive of cranes after unscrewing nuts, bolts, washers including other connected accessories with shaft such as breaking assembly, coupling, bearings, gear box lowering down the smaller portion of shaft from 20ft approximate height for removing and threading, repairing manufacturing drilling teeth keys,cleaning, greasing and oiling of all the bearing, bearing housing, gear box etc for smooth functioning, complete including re-assembly with connected accessories after repair including carrying out necessary alignment of all the parts connected with shaft all as specified and directed by Engr-in-Charge. |
| 50 | (b) Servicing / strip opening of up/down micro electric braking arrangement after un-screwing nuts, bolts washers, re-adjustment of braking springs, brake leathers, gun metal bushes of shaft housing in brake box making oiling/greasing arrangement complete re-assembling and testing complete all as specified and directedby Engineer -in-charge.(c) Servicing /strip opening of limit switches after unscrewing nuts/bolts washers for readjustment of limit switch, replacement of burnt contacts, wires, lugs/thimbles etc. Re-assembling and testing complete all as specified and directed by Engr-in- Charge. |
| 51 | Material and labour for changing of Gear oil of EOT Crane of capacity 3 Ton after draining out old oil cleaning of Gear oil complete all as specified and directed by Engr-in- Charge. |
| 52 | S&F in repair power contactor 16 Amp 3 pole, 415/110 volt fixed to EOT Crane & connecting complete all as specified and directed by Engr-in- Charge. |
| 53 | S&F single phase preventer for EOT Crane and connecting complete all as specified and directed by Engr-in- Charge. |
| 54 | S&F in repair limit switch to controll the movement of wheels ofEOT Crane of capacity 3 Ton fixed in position and connecting complete all as specified and directed by Engr-in- Charge. |
| 55 | S&F in repair flame proof pendent of EOT Crane with capacity 3 Ton including(forward & Reverse,left & right,Start &stop,up and down,Emergency Stop) all connecting function complete all as specified and directed by Engr-in- Charge. |
| 56 | Servicing of crane capacity 5 Ton, Tawi Jack well Power House& Tawi Jack well Low lift pump House. Servicing deems to be including the following process:- (a) Dismantling the manually operated main driving shaft of forward/reverse drive of cranes after unscrewing nuts, bolts, washers including other connected accessories with shaft such as breaking assembly, coupling, bearings, gear box lowering down the smaller portion of shaft from 20ft approximate height for removing and threading, repairing manufacturing drilling teeth keys, cleaning, greasing and oiling of all the bearing, bearing housing, gear box etc for smooth functioning, complete including re-assembly with connected accessories after repair including carrying out necessary alignment of all the parts connected with shaft all as specified and directed by Engineer-in-charge. |
| 57 | (b) Servicing / strip opening of up/down micro electric braking arrangement after un-screwing nuts, bolts washers, re-adjustment of braking springs, brake leathers, gun metal bushes of shaft housing in brake box making oiling/greasing arrangement complete re-assembling and testing complete all as specified and directedby Engineer -in-charge.(c) Servicing /strip opening of limit switches after unscrewing nuts/bolts washers for readjustment of limit switch, replacement of burnt contacts, wires, lugs/thimbles etc. Re-assembling and testing complete all as specified and directed by Engr-in Charge. |
| 58 | S&F chain of existing size complete with fixing arrengment system including nut bolts and washers etc. for the smooth functioning of crane complete all as specified and directed by Engr-in-Charge. |
| 59 | M&L for changing of Gear oil of EOT Crane of capacity 3 Ton after draining out old oil cleaning of Gear oil complete all as specified and directed by Engr-in-Charge. |
| 60 | S&F in repair power contactor 16 Amp 3 pole, 415/110 volt fixed to EOT Crane & connecting complete all as specified and directed by Engr-in-Charge. |
| 61 | S&F single phase preventer for EOT Crane and connecting complete all as specified and directed by Engr-in-Charge. |
| 62 | S&F in repair limit switch to controll the movement of wheels ofEOT Crane of capacity 3 Ton fixed in position and connecting complete all as specified and directed by Engr-in-Charge. |
| 63 | S&F in repair flame proof pendent of EOT Crane with capacity 3 Ton including(forward & Reverse,left & right,Start &stop,up and down,Emergency Stop) all connecting function complete all as specified and directed by Engr-in-Charge. |
| 64 | M& L for painting toEOT / HOT runway beam/ rail ,bridge girder, trolley frame and motor assemblyby applying two coats of synthetic enamelled paint over a coat of red oxide primer after cleaning of surfaces by means of rubbing by sand paperand removing rusted and corrded particles cleaning with cloths including reparing smooth surface for painting complete all as specified and directed by Engr-in-Charge. |
| 65 | Supply only spraying herbicide (Round up) on area to remove unwanted vegitation/grass at various locations complete all as specified and directed by Engr-in-Charge. |
| 66 | M&L Chemical spray (DC 2.26 contact cleaner) in container of 415 ml/300g for precision blended multipurpose product for prevents corrosion penetrates, lubricants, displaces and seals out moisture release rusted mechanism etc complete all as specified and directed by Engr-in-Charge. |
| 67 | M& L for painting to LT panel board/LT feeder pillar box up to 2x1.2.x.5 M indoor/out door type of sizeinner shell & outer shell including angle iron frame by applying two coats of sunthetic enamelled paint over a red oxide primer after cleaning of panel board inner shell & outer shell by means of rubbing by sand paper griding and removing rusted and corrded particles cleaning with cloths including reparing smooth surface for painting complete all as specified and directed by Engr-in-Charge. |
| 68 | M&L for in replacement of steel nuts,bolts,washers of any size required at site complete all as specified and directed by Engr-in-Charge. |
| 69 | S&F indoor/outdoor end termination joint heat shrinkable 1100 Volts for XPLE cable of size 3.5/4.0 x 10-50 Sqmm complete all as directed by Engr-in-Charge. |
| 70 | S&F indoor/outdoor end termination joint heat shrinkable 1100 Volts for XPLE cable of size 3.5 x 70-120 Sqmm complete all as directed by Engr-in-Charge. |
| 71 | S&F indoor/outdoor end termination joint heat shrinkable 1100 Volts for XPLE cable of size 3.5 x 150-300 Sqmm complete all as directed by Engr-in-Charge. |
| 72 | M&L formannual agriculture sprayer plastic madeof 16-20 ltr tank capacity with back support, sprayer machine includes a handle,3 nozzle sets,lance,clutch,spray pump pistonetc complete all as specified and directed by Engr-in-Charge. |
| 73 | Decoupling, disconnecting suction line and discharge line taking down from foundation, dismounting from base channels strip opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of pump sets and taking to workshop (if reqd) for repairs. Reassembling of pump set mounting and fixing on base channel, recoupling of suction & discharge line realignment commissioning and testing in respect of centrifugal/multistage pump of capacity 15 HP complete all as specified and directed by Engr-in-Charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of parts shall be measured and paid separately under respective item of sch A. |
| 74 | All as per ser item No 65.00 here-in-before but capacity 7.5/5 HP complete all as specified and directed by Engr-in-Charge. |
| 75 | S&F new parts for single/multistage pump of capacity 15 HP as per manufacturer"s composition of existing make of pump as below all as specified and directed by Engr-in-Charge. |
| 76 | Pump impeller made out of stainless steel. |
| 77 | Pump shaft stainless steel shaft complete with check nut and keys. |
| 78 | Shaft sleeves. |
| 79 | Casing bearing. |
| 80 | Bearing housing. |
| 81 | Tyre coupling/star coupling. |
| 82 | Gland cup. |
| 83 | S&F new parts for single/double stage pump of capacity 7.5/5 HP as per manufacturer"s composition of existing make of pump as below complete all as specified and directed by Engr-in-Charge. |
| 84 | Pump impeller made out of Bronze. |
| 85 | Pump shaft stainless steel shaft complete with check nut and keys. |
| 86 | Shaft sleeves. |
| 87 | Casing bearing. |
| 88 | Bearing housing. |
| 89 | Tyre coupling/star coupling. |
| 90 | Gland cup. |
| 91 | Disconnecting electric connection of 15 HP motor, removing the UNSV motor from existing place by unscrewing the foundation bolts and nuts decoupling from the pump, setting aside and transporting to workshop for repairs including dismantling the motor,cutting/taking out burnt winding of stator, rotor, cleaning the slots, transporting back after repair/winding & re-assembling the same complete all as specified and directed by Engr-in-Charge. Note: (a)Rewinding of motor will be measured and paid separately under relevent item. (b)The rates quoted shall be deemed to include the cost of loading/unloading, transportation, grease, nuts, bolts and washers of any size and shape as required at siteand refixing of serviceable motor duly functional and testing complete at its existing location/position complete all as specified and directed by Engr-in-Charge. |
| 92 | All as per srl item No. 69.00here-in-before but capacity of 7.5/5 HP motor complete all as specified and directed by Engr-in-Charge. |
| 93 | Removing the burnt out winding from the rotor and stator, cleaning the slots, providing high quality of class"B" paper insulation inside the slots, rewinding the motor of capacity 15/7.5 HP as per existing with super enamel copper wire of same size and guage as per existing rapping up with high quality cotton tape and varnising with super quality oil including drying upto desired temperature and desired time complete all as specified and directed by Engr-in-Charge. Note:- Cost of labour for winding deemed to be included in the rate quoted. |
| 94 | S & F of Pump bearing No. 6305 C3 complete all as specified and directed by Engr-in-Charge. |
| 95 | S & F of Pump bearing No. 6306 BECBJ complete all as specified and directed by Engr-in-Charge. |
| 96 | S & F of Motor bearing No. 6307 BECBJ complete all as specified and directed by Engr-in-Charge. |
| 97 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth,foundation etc. or for shafts, wells, cesspits, maneholes, pier holes etc. and taking out/laying of pipe lines of hard/dense soil complete all as specified and directed by Engr-in-Charge. |
| 98 | Returning, filling, levelling, spreading, watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed by Engr-in-Charge. |
| 99 | Removing surplus soil not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge. |
| 100 | Taking up or down CI/DI/MS water mains pipe 250 mm bore (including all fittings), with flanged/welded butt joint/ spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.Taking up or down CI/DI/MS water mains pipe 250 mm bore (including all fittings), with flanged/welded butt joint/ spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed by Engr-in-Charge. Note : (i)Unserviceable items retrieved from site should be deposited in MES store by the contractor. (ii) cost of transportation of unsv materials from site to MES store deemed to be included in the quoted rates. |
| 101 | Refixing MS/DI/CI pipe obtained from item No. 8 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 250 mm bore complete inlcuding main / branch connections complete all as specified and directed by Engr-in-Charge. |
| 102 | Supply, laying, jointing and testing MS ERW pipe class "B" of bore 250 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI markedalongwith circular welding joints laid in trenches/ along road/ on surface/ slopes/pillars/ culverts/ causeways etc complete all as specified and directed by Engr-in-Charge. |
| 103 | Taking up or down CI/DI/MS water mains pipe 200 mm bore (including all fittings), with flanged/welded butt joint/ spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed by Engr-in-Charge. Note : (i)Unserviceable items retrieved from site should be deposited in MES store by the contractor. Note : (i)Unserviceable items retrieved from site should be deposited in MES store by the contractor. (ii) cost of transportation of unsv materials from site to MES store deemed to be included in the quoted rates. |
| 104 | Refixing MS/DI/CI pipe obtained from item No. 4 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 200 mm bore complete inlcuding main / branch connections complete all as specified and directed by Engr-in-Charge. |
| 105 | Supply, laying, jointing and testing MS ERW pipe class "B" of bore 200 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI markedalongwith circular welding joints laid in trenches/ along road/ on surface/ slopes/pillars/ culverts/ causeways etc complete all as specified and directed by Engr-in-Charge. |
| 106 | Taking up or down old unseviceable GI pipe of size 150 mm dia including all fittings complete all as specified and directed by Engr-in-Charge.Note : (i)Unserviceable items retrieved from site should be deposited in MES store by the contractor. (ii) cost of transportation of unsv materials from site to MES store deemed to be included in the quoted rates. |
| 107 | Refixing GI/CI pipe obtained from Item No. 07 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 150 mm dia complete including main branch connections complete all as specified and directed by Engr-in-Charge. |
| 108 | S & FGI pipes of size 150 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete complete all as specified and directed by Engr-in-Charge. |
| 109 | Taking up or down GI pipe ofbore pipe 80 mm dia including all fittings complete all as specified and directed by Engr-in-Charge. |
| 110 | All as per serial item No 87.00 here-in-before but of size 50 mm dia complete all as specified and directed by Engr-in-Charge. |
| 111 | All as per serial item No 87.00 here-in-before but of size 40 mm dia complete all as specified and directed by Engr-in-Charge. |
| 112 | All as per serial item No 87.00 here-in-before but of size 25 mm dia complete all as specified and directed by Engr-in-Charge. |
| 113 | All as per serial item No 87.00 here-in-before but of size 20 mm dia complete all as specified and directed by Engr-in-Charge. |
| 114 | Refixing GI/CI pipeobtained fromItem No. 23above and connections in new or old position (walls, trenches, ceiling andfloors etc.) bore of pipe 80mm dia, Complete including main/branch connections complete all as specified and directed by Engr-in-Charge. |
| 115 | All as per serial item No 88.00 here-in-before but of size 50 mm dia complete all as specified and directed by Engr-in-Charge. |
| 116 | All as per serial item No 88.00 here-in-before but of size 40 mm dia complete all as specified and directed by Engr-in-Charge. |
| 117 | All as per serial item No 88.00 here-in-before but of size 25 mm dia complete all as specified and directed by Engr-in-Charge. |
| 118 | All as per serial item No 88.00 here-in-before but of size 20 mm dia complete all as specified and directed by Engr-in-Charge. |
| 119 | S & F only GI pipes in repair of bore of pipe 80mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge. |
| 120 | All as per serial item No 89.00 here-in-before but of size 50 mm dia complete all as specified and directed by Engr-in-Charge. |
| 121 | All as per serial item No 89.00 here-in-before but of size 40 mm dia complete all as specified and directed by Engr-in-Charge. |
| 122 | All as per serial item No 89.00 here-in-before but of size 25 mm dia complete all as specified and directed by Engr-in-Charge. |
| 123 | All as per serial item No 89.00 here-in-before but of size 20 mm dia complete all as specified and directed by Engr-in-Charge. |
| 124 | Decoupling, disconnecting sluice valve of size 250 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position complete all as specified and directed by Engr-in-Charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F ofspare parts shall be measured and paid separately under respective item |
| 125 | Stem bush bronze complete all as specified and directed by Engr-in-Charge. |
| 126 | Gland flange cast iron complete all as specified and directed by Engr-in-Charge. |
| 127 | Stud/Bolt carbon steel complete all as specified and directed by Engr-in-Charge. |
| 128 | Stem nut/chaknut complete all as specified and directed by Engr-in-Charge. |
| 129 | Stem Stain less steel complete all as specified and directed by Engr-in-Charge. |
| 130 | Decoupling, disconnecting sluice valve of size 200 mmtaking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position complete all as specified and directed by Engr-in-Charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F ofspare parts shall be measured and paid separately under respective item |
| 131 | Stem bush bronze complete all as specified and directed by Engr-in-Charge. |
| 132 | Gland flange cast iron complete all as specified and directed by Engr-in-Charge. |
| 133 | Stud/Bolt carbon steel complete all as specified and directed by Engr-in-Charge. |
| 134 | Stem nut/chaknut complete all as specified and directed by Engr-in-Charge. |
| 135 | Stem Stain less steel complete all as specified and directed by Engr-in-Charge. |
| 136 | S & F in repair/replacement of pumping set submerssible open well suitable for electric driven 415V, AC, 50 Hz, 3 Pole suitable for 65/40 mm dia sucton /delivery complete of capacity 5HP/3.7 KW, 1, stainless steel body, discharge 730 LPM at 40 Mtr Head, including provn of suitabled size connecting piece/distance piece suitable to connect the pump with column pipe & necessary arrangement for welding/fixing with pump end including copper conductor cable 6sqmm 3core 50mtr with DOL Starter complete all as specified and directed by Engr-in-Charge. |
| 137 | Decoupling, disconnecting sluice valve of size 150 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position complete all as specified and directed by Engr-in-Charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F ofspare parts shall be measured and paid separately under respective item |
| 138 | Stem bush bronze complete all as specified and directed by Engr-in-Charge. |
| 139 | Gland flange cast iron complete all as specified and directed by Engr-in-Charge. |
| 140 | Stud/Bolt carbon steel complete all as specified and directed by Engr-in-Charge. |
| 141 | Stem nut/chaknut complete all as specified and directed by Engr-in-Charge. |
| 142 | Stem Stain less steel complete all as specified and directed by Engr-in-Charge. |
| 143 | S & F in replacement cast iron sluice valve of size 200mm dia (PN 1.6) ISI Marked with iron wheel headboth end flanged, steel spindle, non rising typecomplete with neoprene rubber gasket, nuts, bolts and washers etc,including taking down the old existing complete all as specified and directed by Engr-in-Charge.Note : (i)Unserviceable items retrieved from site should be deposited in MES store by the contractor. (ii) cost of transportation of unsv materials from site to MES store deemed to be included in the quoted rates. |
| 144 | All as per Serial item No 94.00here-in-before but 150mm dia complete all as specified and directed by Engr-in-Charge. |
| 145 | Supply fabrication and fixing MS joints like bends Tee, tapers, collars, elbow, tail piece (any type) caps, plugs up to 100 mm to 150 mm bore complete all as specified and directed by Engr-in-Charge. |
| 146 | S & Fleather gasket including replacement old UNSV gasket for 300/250 mmcomplete all as specified and directed by Engr-in-Charge. Note:- (i) Contractor fully responsible for necessory excavation for replacement of gaskit work required T&P equipment, mechanical excavation work and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate. |
| 147 | S & F leather gasketincluding replacement old UNSV gasket for 200/150 mmcomplete all as specified and directed by Engr-in-Charge. Note:- (i) Contractor fully responsible for necessory excavation fo rreplacement of gaskit work required T&P equipment, mechanical excavation work and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate. |
| 148 | M&L for repair to leaking run lead joints in CI/DI spigot and socket end pipe line of 250 mm bore by providing new lead ,using good quality spun yarn, including necessary excavation, returning fillingin trenches in any type of soil,bailing out water, and at any depth complete all as specified and directed by Engr-in-Charge. Note:- (i) Contractor fully responsible for necessory excavation for jointing work required T&P equipment, mechanical excavation work and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate. (ii) Required extra fittings/pipe will be measured and paid separately. |
| 149 | All as perSerial item No 99.00 here-in-before but of dia 200 mm bore pipe complete all as specified and directed by Engr-in-Charge. |
| 150 | M & L for repair to leaking flanged/circular welding joints of 100 to 200 mm bore MS/GI pipe line by providing rubber or fiber board gasket, new flanges if required at site, nut bolts, washers and welding works where required etc, including necessary excavation, returning fillingin trenches in any type of soil, bailing out water, and any depth complete all as specified and directed by Engr-in-Charge. Note:- (i) Contractor fully responsible for necessory excavation for jointing work required T&P equipment, mechanical excavation work and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate. (ii) Required extra pipe will be measured and paid separately.. |
| 151 | All as perSerial item No 101.00 here-in-before but of dia 250to 300 mm bore pipe complete all as specified and directed by Engr-in-Charge. |
| 152 | M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stoneaggregate) cement concrete inas in foundation filling of pump,pole & stay complete all as specified and directed by Engr-in-Charge. |
| 153 | M&L for Premix ready mix road repair patching compound for instant road repair manufactured with a blend of bitumen, aggregates and high grade polymer to ensure immediate bonding with existing surface available in bag of 25 Kg complete all as specified and directed by Engr-in-Charge. |
| 154 | S & F in replacement of gun-metal, globeor gate valves, 50mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), including taking down the old existingcomplete all as specified and directed by Engr-in-Charge. |
| 155 | All as perSerial item No 105.00 here-in-before but of dia 40 mm gate valve complete all as specified and directed by Engr-in-Charge. |
| 156 | All as perSerial item No 105.00 here-in-before but of dia 25 mm gate valve complete all as specified and directed by Engr-in-Charge. |
| 157 | All as per Serial item No 105.00 here-in-before but of dia 20 mm gate valve complete all as specified and directed by Engr-in-Charge. |
| 158 | S & F in replacement of terminal box suitable for 15 HP motor as per existing specification including taking down the old existing terminal box complete all as specified and directed by Engr-in-Charge. |
| 159 | All as perSerial item No 109.00 here-in-before but of for 7.5/5 HP MOTOR complete all as specified and directed by Engr-in-Charge. |
| 160 | M&L for spray painting of pump and motor, frame including surface preparation by scrapping with hamery paper or grinder with two coat of synthethic enamel paint over one coat of red oxide primer of existing colour of approved make to the satisfactioncomplete all as specified and directed by Engr-in-Charge. |
| 161 | M&L forwriting the with brush about the machinery installed in different instalations eg Cap, discharge,MES No,Year of installation and head of the machineryon the wall in front of the pump motor with black paintincluding removing the existing paint with help of grinder complete all as specified and directed by Engr-in-Charge. |
| 162 | M&L in replacement of aluminium lugs suitable for 185 Sqmm aluminiumcable including taking down the existing unserviceable onecomplete all as specified and directed by Engr-in-Charge. |
| 163 | M&L in replacement of aluminium lugs suitable for 95 Sqmm aluminiumcable including taking down the existing unserviceable onecomplete all as specified and directed by Engr-in-Charge. |
| 164 | Supply and laying in replacement of synthetic rubber insulated mats 10 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006,( superseding IS 5424) suitable for electrical shock safetyof sizes 2mx1m complete all as specified and directed by Engr-in-Charge. |
| 165 | Supply and lay DWC (Double wall corruguated) pipe 77/63 mm conforming to IS: 14930/IS 16205 for protection of earth strip/cable including necessary snap-fit coupler reqd for fixing complete all as specified and directed by Engr-in-Charge. |
| 166 | Supply and lay DWC (Double wall corruguated) pipe 90/63 mm conforming to IS: 14930/IS 16205 for protection of earth strip/cable including necessary snap-fit coupler reqd for fixing complete all as specified and directed by Engr-in-Charge. |
| 167 | S & F in repair to GI fittings medium grade ISI marked including cutting, screwing etc including taking down complete all as specified and directed by Engr-in-Charge. |
| 168 | Elbow 15mm . |
| 169 | Elbow 20mm. |
| 170 | Elbow 25mm. |
| 171 | Elbow 40mm. |
| 172 | Elbow 50mm. |
| 173 | Elbow 80mm. |
| 174 | Socket 15mm. |
| 175 | Socket 20mm. |
| 176 | Socket 25mm. |
| 177 | Socket 40mm. |
| 178 | Socket 50mm. |
| 179 | Socket 80mm. |
| 180 | Union 15mm. |
| 181 | Union 20mm. |
| 182 | Union 25mm. |
| 183 | Union 40mm. |
| 184 | Union 50mm. |
| 185 | Union 80mm. |
| 186 | Elbow reducer 20 x 15mm. |
| 187 | Elbow reducer 25 x 20mm. |
| 188 | Elbow reducer 40 x 25mm. |
| 189 | Socket reducer 25x20mm. |
| 190 | Socket reducer 40x25mm. |
| 191 | Socket reducer 40x20mm. |
| 192 | Socket reducer 50x25mm. |
| 193 | Nipple 15 x50mm. |
| 194 | Nipple 15 x100mm. |
| 195 | Nipple 20 x50mm. |
| 196 | Nipple 20 x100mm. |
| 197 | Nipple 25 x 50mm. |
| 198 | Nipple 25 x 100mm. |
| 199 | Nipple 40 x 50mm. |
| 200 | Nipple 40 x 100mm. |
| 201 | Nipple 50 x 50mm. |
| 202 | Nipple 50 x 100mm. |
| 203 | Tee 15mm. |
| 204 | Tee 20mm. |
| 205 | Tee 25mm. |
| 206 | Tee 20x15mm. |
| 207 | Tee 25x20mm. |
| 208 | Tee 40x15mm. |
| 209 | Tee 40x20mm. |
| 210 | Tee 40x25mm. |
| 211 | Tee 50x25mm. |
| 212 | Dead plug 15mm. |
| 213 | Dead plug 20mm. |
| 214 | Dead plug 25mm. |
| 215 | Dead plug 40mm. |
| 216 | Dead plug 50mm. |
| 217 | Lead. |
| 218 | Lead wool. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
