Military Engineer Services-MES has published Tender For Repairs / Replacement And Periodical Maintenance Of Ro Plants, Swimming Pool And Stp Plants At Afs Darjipura Baroda. Submission Date for this Tender is 01-05-2024. Sewage Treatment Plant Tenders in baroda Gujarat. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 24-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-05-2024 |
| FileName | File Description | File Size |
| 1df0b7da-0c59-4faf-bd5f-8607df8d0354.html | Tender Notice | 0 KB |
| 8895GeneralPage.pdf | Tender Document | 0 KB |
| BOQ_726199.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Supply and use of polyelectrolyte chemical for disinfection of raw sewage water, ISI marked complete all as specified and directed. |
| 2 | Supply and use of alum (Aluminium Sulphate) chemical for disinfection of raw sewage water, ISI marked complete all as specified and directed. |
| 3 | Supply and use of sodium hypochloride liquid chemical 100 GPL for treated sewage water, ISI markedcomplete all as specified and directed. |
| 4 | Dismantling/taking out non clogg submersible sewage pump set complete 7.5 HP and carrying out including repair/replacement for defective parts such as bearing, shaft sleeves, gland plate, impeller, including replacement of worn out nuts, bolts, filling of pump oil heavy grade , greasing of bearing, replacement of gaskit/ mechanical seal, rotor shaft job, shaft coupling, spider etc or any other part and reassmebling, testing & commissioning complete making it smooth functioning complete all as specified and directed. Note : 1. Rates for making arrangement for lifting up the non clogg sewage pump from inside well shalldeemed to be included in quoted rates. 2. Once the motor pump set repaired, the contractor shall by default get the bearing, and other necessary parts changed and shall remain responsible for proper functioning of motor pump. 3. The contractor should get the repairing work done at the installation site in presence of MES rep and only the rewinding and rotor job to be done outside defence land. |
| 5 | Dismantling/taking out non clogg submersible sewage pump set complete 5 HP and carrying out including repair/replacement for defective parts such as bearing, shaft sleeves, gland plate, impeller, including replacement of worn out nuts, bolts, filling of pump oil heavy grade , greasing of bearing, replacement of gaskit/ mechanical seal, rotor shaft job, shaft coupling, spider etc or any other part and reassmebling, testing & commissioning complete making it smooth functioning complete all as specified and directed. Note : 1. Rates for making arrangement for lifting up the non clogg sewage pump from inside well shalldeemed to be included in quoted rates. 2. Once the motor pump set repaired, the contractor shall by default get the bearing, and other necessary parts changed and shall remain responsible for proper functioning of motor pump. 3. The contractor should get the repairing work done at the installation in presence of MES rep and only the rewinding and rotor job to be done outside defence land. |
| 6 | M & L for rewinding to motor stator winding of capacity 7.5 HP non-clog submersible pump set, 3 phase by using best quality super enamelled copper winding wire of existing gauge and existing Nos of turns including varnishing for "F" class insulation and drying in heat chamber and refixing testing, commissioning complete so as to have same RPM, complete all as specified and directed |
| 7 | M & L for rewinding to motor stator winding of capacity 5 HP non-clog submersible pump set, 3 phase by using best quality super enamelled copper winding wire of existing gauge and existing Nos of turns including varnishing for "F" class insulation and drying in heat chamber and refixing testing, commissioning complete so as to have same RPM, complete all as specified and directed |
| 8 | Dismantling / taking out non clog centrifugal/monoblock sewage pump set complete 5 HP and carrying out including repair/replacement for defective parts such as bearing, shaft sleeves, gland plate, impeller, including replacement of worn out nuts, bolts, filling of pump oil heavy grade , greasing of bearing, replacement of gaskit/ mechanical seal, rotor shaft job, shaft coupling, spider etc or any other part complete all as directed and reassmebling, testing & commissioning complete making it smooth functioning complete all as specified and directed. Note:- 1. Rates for making arrangement for lifting up the non clogg sewage pump from inside well shalldeemed to be included in quoted rates.2. Once the motor pump set repaired, the contractor shall by default get the bearing, and other necessary parts changed and shall remain responsible for proper functioning of motor pump. 3. The contractor should get the repairing work done at the installation site in presence of MES rep and only the rewinding and rotor job to be done outside defence land. |
| 9 | M & L for Dismantling/taking out motor stator for rewinding of capacity 5 HP motor of monoblock set, 3 phase by using best quality super enamelled copper winding wire of existing gauge and existing Nos of turns including varnishing for "F" class insulation and drying in heat chamber and refixing testing, commissioning complete so as to have same RPM, complete all as specified and directed. |
| 10 | Dismantling/taking out non clog centrifugal/monoblock sewage pump set complete 12 HP and carrying out including repair/replacement for defective parts such as bearing, shaft sleeves, gland plate, impeller, including replacement of worn out nuts, bolts, filling of pump oil heavy grade , greasing of bearing, replacement of gaskit/ mechanical seal, rotor shaft job, shaft coupling, spider etc or any other part complete all as directed and reassmebling, testing & commissioning complete making it smooth functioning complete all as specified and directed. Note:- Rates for making arrangement for lifting up the non clogg sewage pump from inside well shalldeemed to be included in quoted rates.2. Once the motor pump set repaired, the contractor shall by default get the bearing, and other necessary parts changed and shall remain responsible for proper functioning of motor pump. 3. The contractor should get the repairing work done at the installation site in presence of MES rep and only the rewinding and rotor job to be done outside defence land. |
| 11 | M & L for Dismantling/taking out motor stator for rewinding of capacity 12 HP motor of monoblock set, 3 phase by using best quality super enamelled copper winding wire of existing gauge and existing Nos of turns including varnishing for "F" class insulation and drying in heat chamber and refixing testing, commissioning complete so as to have same RPM, complete all as specified and directed. |
| 12 | M & L for Dismantling/taking out to motor/pumpfor rewinding of capacity 7.5 HP submersible Arreator pump set 3 phase by using best quality super enamelled copper winding wire of existing gauge and existing Nos of turns including varnishing for "F" class insulation and drying in heat chamberandincluding repair/replacement for defective parts such as bearing, shaft sleeves, gland plate, impeller, including replacement of worn out nuts, bolts,, greasing of bearing, replacement of gaskit/ mechanical seal, rotor shaft job, shaft coupling, spider etc or any other part completerefixing testing, commissioning complete so as to have same RPM complete all as specified and directed. |
| 13 | Material and Labour for dismantling the Blower unit complete from MAP STP and carrying out repair/replacement for defective parts such as bearing, shaft sleeves, gland plate, impeller, including replacement of worn out nuts, bolts, filling of blower oil heavy grade, greasing of bearing, replacement of gaskit, mechanical seal, rotor job etc complete all as directed and reassembling, testing & commissioning complete all as specified and directed. Note:- Once the blower unit repaired, the contractor shallremain responsible for proper functioning of blower assembly. |
| 14 | M & L for Dismantling/taking out blower motor for rewinding of capacity 10 HP motor of3 phase by using best quality super enamelled copper winding wire of existing gauge and existing Nos of turns including varnishing for "F" class insulation and drying in heat chamber and refixing testing, commissioning complete so as to have same RPM, complete all as specified and directed. |
| 15 | Repair and servicing of 2 Hp motor of clarisetteler 3 phase 415 volt providing insulation including tightning of chain mechanism, varnishing, heating, replacement of suitable bearing, seals, gaskets, worn out carbon brushes, rotor job, couplings or any other part etc complete testing all as required for completion of JOB. Note: 1. Rates for making arrangement for lifting up motor from site shall be deemed included in quoted rates. 2. Once the motor repaired, the contractor shall by default get the bearing, and other necessary parts changed and shall remain responsible for proper functioning of motor. |
| 16 | M & L for Cleaning of sewage incoming well of size 22 Ft X 22 Ft and depth 28Ftlocated at sewage treatment plant with man power and T&P (Tools and plants) such as pump set for De-watering and cleaning upto bottom of the well with all complete safety equipment and lifting of sludge by means of Hydra and taking out all clay/sludge/mud/stone pieces and other material deposited in the sewage well during course of time and removing deposited material to a distance from 250 mtr of the cantonment arera of the AFS Darjipura in a four months interval complete all as specified and directed. (At MAP STP) Note: Rates for arranging machineries for carrying out the job deemed to be included in quoted rates. |
| 17 | Cleaning of main receiving sump of size 5mtr dia and 6 mtr deep at sewage treatment plant with man power and T&P (Tools and plants) required to remove the sludge and greet from receiving well and throwing it to place outside the STP area with all complete safety equipment and lifting of sludge by means of Hydra and taking out all clay/sludge/mud/stone pieces and other material deposited in the receiving well during course of time and removing deposited material to a distance of 250 mtr of the cantonment arera of the AFS Darjipura in a four months interval complete all as specified and directed (At OLD STP) |
| 18 | Cleaning of Arreator well sump of size 10 mtrx 5 mtr x 3 mtr at sewage treatment plant (old STP) with all man power and T&P(Tools and plants) required to pump out existing water and removing the sludge and greet from deep water collectorwith all safety equipment and throwing it to place outside the STP area complete including painting properly inside complete all as specified and directed. |
| 19 | M & L for Cleaning of sewage Stilting Chamber by opening including sewage transfer pipes of mixing chamber near stilling tank, Bio Reactor -I, Bio Reactor-II,treated water & filter feed tank/sump, Rotating clarisettler chamber by removing and washing all fiber pens and resettling after cleaning complete located at sewage treatment plant with man power and T&P (Tools and plants) such as pump set for De-watering, tripod, chain pully, rope, steel bucket, phawara etc all required for completion of Job for cleaning upto bottom of the well and taking out all clay/sludge/mud/stone pieces and other material deposited in the sewage well during course of time and removing deposited material to a distance of 50 mtr from the site of well thereafter applying one coat of approved paint inside complete all as specified and directed. Note: (i) Rates for making arrangement of cleaning of 5.5m deep Stilling Chamber,Bio reactor I&II, 2.5m deep filter feed sump and treated water sump is considered as one job & including of painting inside shall deemed to be considered in quoted rates . |
| 20 | M & L for Cleaning of sewage drying bed of size 25Ft X 25 Ft and depth 4 Ft located at sewage treatment plant with man power and T&P (Tools and plants) cleaning upto bottom of the bed with all complete safety equipment and lifting of sludge by means of Hydra and taking out all clay/sludge/mud/stone pieces and other material deposited in the sewage well during course of time and removing deposited material to a distance of 100 mtr from the site of the well complete all as specified and directed. Note: Rates for arranging machineries for carrying out the job deemed to be included in quoted rates. |
| 21 | M & L for scrapping/cleaning of outer surfaces of Air Blower, Treated water pump, Pressure feed pump, Clarisetter motor gear set and other motors and spray painting with two coats of best qualitiy sythetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 22 | M & L for scrapping/cleaning of outer surfaces of Pipes of any size and any type and Headers and spray painting with two coats of best qualitiy MS sythetic anticorrosive bitumin paint over one coat of red oxide primer(colour as per approved by GE) complete including marking and writing details all as specified and directed. |
| 23 | Supply and fix in repair of bellow type PVC flexible pipe (heavy duty) of size 80 mm dia for sewage system, ISI marked complete all as specified and directed. |
| 24 | Supply and fix in repair star delta starter CE certified for 12.5HP motor 415 V, 50 Hz capacity and IS-13947-4-1 complete all as specified and directed. |
| 25 | Supply and fix in repair star delta starter CE certified for 7.5HP motor 415 V, 50 Hz capacity and IS-13947-4-1 complete all as specified and directed. |
| 26 | Supply and fix in repair of contactor CE certified for 7.5/5 HP motor starter 415 V, 50 Hz capacity complete all as specified and directed. |
| 27 | Supply and fix in repair of overload and single phasing relay suitable for 6-10 Amp for 7.5/5 HP motor starter panel 415 V, 50 Hz capacity complete all as specified and directed. |
| 28 | Material and labour for removing the old gravels and sand from sand filter and old activated carbon from carbon filter, cleaning the vessels from inside complete and supply and set as per below Bottom layer: 100mm thick of gravel of 20-40 mm nominal size. Third layer : 100mm thick of gravel of 12-20 mm nominal size. Second layer: 100mm thick of gravel of 2-6 mm nominal size. Top layer : 150mm thick of silica sand (1-2 mm size.) Activated Carbon : As per Site requirment. Note: Work for Sand filter and carbon filter vessels are considered in single job. |
| 29 | Supply and fix in repair butterfly valve stainless steel shaft and CI body with cruch handle, PN-1.0 of following sizes :- |
| 30 | 80mm Size |
| 31 | 100mm Size |
| 32 | Supply and fix in repair pressure gauge 0-4 kg/cm²/0-60 Psi SS316 existing at site analog type complete all as specified and directed. |
| 33 | Supply and fix in repair pressure gauge 0-60 kg/cm² SS316 existing at site analog type complete all as specified and directed. |
| 34 | Supply and laying MS Pipes heavy grade with all fittings laid in floors or fixed to walls and ceilings/Sewage well etc of following sizes including taking down old unservicable existing pipe complete all as specified and directed. Note: i. Fixing/laying includes welding works as persite requirement. ii.The rates of proper welding in and including flanges and smoothing the surface deemed included in quoted rates. |
| 35 | 80 mm bore size |
| 36 | 100 mm bore size |
| 37 | S&F in repairs Dosing Pump, Capacity: 5.76 lph, Pressure: 10 kg/cm2, Make: Unichlor, Declibec,Milton Ray Type: Electronic, MoC of Head: PP, Mounting: Top Mounted, PowerSupply: 240 V Ac. Single - Phase , 54 W with standard accessory complete all as specified and directed. |
| 38 | Excavation in trenches not exceeding 1.5 m wide and not exeeding 1.5 m in depth and getting out in soft/loose soil for removing/laying of cable etc complete all as specified and directed. |
| 39 | Returning, filling in excavated soil in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each complete all as specified and directed. |
| 40 | Removing surplus excavated soil to a distance not exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. |
| 41 | M&L well burnt bricks sub class "B" as in protection of cable laid dry, flat abutting each other width wise complete all as specified and directed. |
| 42 | M&L for sand cushioning to PVC cable with using clean dry and natural river sand gently punning below/around cable complete all as specified and directed. Note : Only punned thickness shall be measured and paid. |
| 43 | Supply and laying or fixing of cable passing through pipe 1100 volts grade heavy duty submersible cable with PVC insulated 4 sqmm 3 core copper conductor unarmoured including connections including taking down old unservicable cable complete all as specified and directed. |
| 44 | Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor cable 1100 volts grade in trenches ducts, pipe on walls, poles including taking down old unservicable Cable complete all as specified and directed of of following sizes :- Note : Excavation and earth work shall be measured and paid separately |
| 45 | 50 sqmm 3.5 core |
| 46 | 35 sqmm 3.5 core |
| 47 | 10 sqmm 2 core |
| 48 | S&F in repair of HDPE pipe PE 100 PN 8 as per IS 4984 complete of size 100mm dia complete all as specified and directed. |
| 49 | S&F in repair of GI pipe of "Medium grade" of size 50 mm with all fitting, laid in trenches complete all as specified and directed. |
| 50 | M&L for oiling and greasing of pump motor parts (any make any size) by means of greasing gun or manually by unbolting and separating the pump motor set complete for smooth operation of machinery complete making it leakage free and applying galnd packing of necessary quantity and making working noise and leakage free complete all as specified and directed. |
| 51 | Supply and fix in repair of FRP made Junction box of size 300mm x 200mm with provision of seprators and connectors for three phase motors connection/ for lights with closing arrangement and fixing on wall complete all as specified and directed. |
| 52 | S&F in repair indicator board of size 250mm x 100mm made of acrylic/PVC for indication of section of plant such as Main well, Aireator tank, settling tank, recycle tank, DG set room, Pump room etc in base of blue colour and writeup in white colour stencil cut duly pasted on it and size of letter complete all as specified and directed. |
| 53 | M & L for testing of water sample at authorised government laboratory for BOD and COD of waterincluding glass bottle for collection of sample. Note: Sample of water to be collected from wherever directed by Engr-In-Charge will be responsibility of contractor.(Water sample to be taken from MAP STP and OLD STP) |
| 54 | S&F in repair of MCCBswitch of 200 Amp 415 Volt with 4 pole 25 kA rating complete all as specified and directed. |
| 55 | Supply and fix in repair single phase preventor suitable for 3 phase motor of any make any size all as per sample complete all as specified and directed. |
| 56 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty roundcable with PVC insulated copper conductor served with an inner sheathing of PVC tapeunarmouredoverall PVC sheathed 6 sq. mm nominal cross section 4 Core solid conductor including taking out old unservicable exising cable complete all as specified and directed. |
| 57 | M & L for Framed work for foundation frame of motors using angle or other section with gasket plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete with locking arrangement complete all as specified anddirected. |
| 58 | Supply and fixing of PVC water tank of heavy duty triple layers at exesisting placeof capacity 200 Lter incl fixing of nacessary arrangement such as inlet and outlet water connections of suitable size of pipes including dismentalling of old one complete all as specified and directed. |
| 59 | Supply, fixing, connecting and testing street light LED INVERTOR type suitable for working on 230 volts, 50 Hz, AC of 45 WattsIncluding taking down complete all as specified and directed. |
| 60 | S & F of fan belt for compressor to motor of suitable size and type complete all as specified and directed |
| 61 | Dismentling& taking out existing U/S pumping unit of pumpmotor set installed at MAP pump house Darjipura and S & F of new pumping unit (centrifugal Pump) of 100x100 mm size suction and delivery with 2900 RPM and discharge of 100 mtr3 /Hrs on35 Mtr headsuitable for coupled with 415 V 3 phase of 25 HP capacity existing motor including stainless steel impeller, mechanical seal,MS coupler with rubber packing & stainless steel shaft complete assembled / alligned with existing motor on common iron frame recommended by OEM and grouted on foundationincluding testing and commissioning complete all as specified .Note- 1.PCC /RCC foundation for grouting of Pump is dim included in quoted rate. Required length of MS pipe and fabrication of suction and delivery pipe also included in quoted rate. 2. It is suggusted that contractor has to be visit the site (MAP Pump house Darjipura) before qoute the rate. If item will not executed by contractor thenPenalty of Rs 50000/-will be recovered. 3. Old U/S pump unit will be deposited in MES store yard. |
| 62 | M&L for earthing complete with galvanised steel earth plate, electrode, 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanised earth strip of size 25 x 4 mm by means of nuts, bolts, & washers of GI as shown in electrical plate No. 5 of SSR Part-I. Connected to earthing test point all as specified and including necessary earth pit PCC 1:3:6 chamber be 50mm thick PCC 1:2:4 chamber cover with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover, watering arrangement shall be made with GI pipe light grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 32mm dia upto 7.5 from the earth plate electrode & refillling of soil etc including necessary excavation & earth work in any strata and PCC chamber complete all as specified and directed including demolishion of old and unservicableexisting earth pit and removing from site . |
| 63 | Supply and fix in repair glass tube type rotameter (20- 200 LPM) (F-12000) to measure liquid flow rate or asexist at site of RO Plant 10000 per Hour complete all as specified and directed. Make : Aster/GPC/UKL. |
| 64 | Description all as per item No 56.00 here-in-before but 40-160 LPM (F-10000) ofor asexist at site RO Plant 10000 per Hour. |
| 65 | Description all as per item No 56.00 here-in-before but 5000 LPH (F-5000 L) or as existing at site of RO Plant 10000 per Hour. |
| 66 | Supply and usefor day to day operation and maintenanceofRO plant by usingfollowing items complete all as specified and directed (Make:Aventura or equivalent as approved.) :- |
| 67 | Sodium Meta Bisulphate. |
| 68 | Anitscalent chemical. |
| 69 | PH Correction chemical |
| 70 | Calcium Hypo chloride granuller typeGrade 1, Available Chlorine (min.): 65-70% ) chlorination of RO water, ISI marked complete all as specified and directed. Make Aquafit |
| 71 | Material & Labour for cleaning/ CIP (Cleaning in process) of RO plant using proper authorised chemical (Acidto remove inorganic and iron deposits and alkalinefor cleaning of membrane frombiological matter, organic foulants, and silica deposits complete all as specified and directed. Note: (i) Acid cleaning should be performed at a pH of about 2. (ii). Alkaline cleaning is performed at a pH of about 12 (iii) CIP will be done in every two month interval of time OR as per requirement of water quality. (iv) Date of cleaning and due date of cleaning/CIP register to be maintened by the contractor duly signed by contractor, JE(E/M) and AGE(E/M) and to be produced at the time of payment. |
| 72 | Supply and fix in replacement complete with "O" rings polypropylene filter 5 micron sediments filter (size-2.5"X 20" long) meeting FDA specification complete all as specified and directed. Make :Water Net Delux HD 05, Fulflo, XLT, Kemflo Hydranuautic, GE. Note :- Sediment filter to be replaced regularly as & when directed by Engineer-In-charge.Date of change of filter to maintened on register duly signed by Contractor, JE(E/M) and AGE(E/M). |
| 73 | Supply and fix in repair of Butterfly valve/NRV made out of UPVC material standard quality including 12mm SS nut bolts and washer and of size 4 inch complete all as specified and directed. (as approved by Engr-In-Charge) of following sizes |
| 74 | 80 mm dia bore |
| 75 | 50 mm dia bore |
| 76 | 25 mm dia bore |
| 77 | Supply and fix in repair of UPVC bends of following sizes complete all as specified and directed |
| 78 | 80 mm dia bore |
| 79 | 50 mm dia bore |
| 80 | 25mm dia bore |
| 81 | Supply and fix in repair of UPVC Tee including union of following sizes complete all as specified and directed |
| 82 | 80 mm dia bore |
| 83 | 50 mm dia bore |
| 84 | 25 mm dia bore |
| 85 | Supply and fix in repair of UPVC flange of following sizes complete all as specified and directed |
| 86 | 80 mm dia bore |
| 87 | 50 mm dia bore |
| 88 | 25 mm dia bore |
| 89 | Supply and fix in repair UPVC pipe line heavy grade of following sizes complete all as specified and directed |
| 90 | 80 mm dia bore |
| 91 | 50 mm dia bore |
| 92 | 25 mm dia bore |
| 93 | Material & labour for preparation of old painted iron surfaces of RO plant components/panels by cleaning, scraping and applying two coat of synthetic enamel paint over coat of primer including necessary markings complete all as specified and directed |
| 94 | Supply and in fix in repair Pressure gauge, Range :0 - 100 Psi,SS bourdon type, 4", bottom connection 1/4" BSP(M). complete all as specified and directed |
| 95 | Supply and in fix in repair Pressure gauge, Range :0 - 400 Psi(GF),SS bourdon type, 4", bottom connection 1/4"or 3/8" BSP(M). complete all as specified and directed |
| 96 | Supply and fix Pressure switchof range 0.1 to 2 Kg/CmSq complete all as specified and directed |
| 97 | Supplyin daily useof Orthodoline solution bottle in 500ml and chlorometer kit for day to day chlorine testing of water and maintained record by contractor and duly signed by JE E/M and Engr-in-chargecomplete all as specified and directed |
| 98 | Disconnecting and taking out existing vertical type high pressure motor pump set of 7.5 HP electric driven 3 phase 415 voltincluding Re-fixing in the same position after repair complete all as specified and directed Note- Rewinding of motor will be measured and paid under respective item of BOQ |
| 99 | Rewinding of 7.5 HP vertical type high pressure pump centrifugal pump (Motor) 3 phase 415 voltwith supper emamelled copper rewinding wire of suitable size/gauge for standard rpm and providing insulation including taking out the existing winding, varnishing, heating, replacement of suitable bearing, seals, gaskets etc complete testing including all other required parts complete all as specified and directed |
| 100 | Servicing of 7.5 HP vertical type high pressure pump centrifugal pumpwith replacing of existing type impeller,greasing,pump bearing,gland packing/dori etc, complete testing including all other required parts such as nut bolts,couppler etc. complete all as specified and directed |
| 101 | Taking out existing 5 Hp feed motor pump outside incoming well at RO plant after dismentling it from existing pipe and servicing and overhauling it by openingon site/greasingand making functional smooth for use including replacing worn Packing, galan dori etc complete making it smooth functional and testing and refixing itwith necessary fittings required for connecting it with pipe line complete all as specified and directed |
| 102 | Servicing of 5 HPcentrifugal pumpwith replacing of existing type impeller,greasing,pump bearing,gland packing/dori etc, complete testing including all other required parts such as nut bolts,couppler etc. complete all as specified and directed |
| 103 | Taking out existing 2 Hp submersible motor pump from main incoming well at RO plant after dismentling it from existing pipe and servicing it and making functional for use including rewinding and replacing worn out parts whichever complete making it functional and testing and refixing it inside the sump with necessary fittings required for connecting it with pipe line complete all as specified and directed |
| 104 | M&L for repairing and servicing of leakages at flanges at various joints such as near pressure guage, motor, pipes and at various location inside RO Plant premises by means of opening from joint and replacing flanges and PVC pipes of required size and length complete with teflon tape and other accessories complete clearing of leakage complete all as specified and directed. (Note: Complete clearing of leakage at various locations of plant will be considered under one job)Note: Any spares other then flanges or teflon tape/ packings/gaskets etc will be measured and paid under respective item of BOQ |
| 105 | Supply and Fix End plates bothside upper and lower of main Cartridge Filter(Pressure Vessel of Size: 8" Ø x 200" long) at RO Darjipura to avoid complete leakage of pressure vessel complete all as specified and directed. Make: GE, Aventura or equivalent Note: All the connected accessories for replacing the end plated will be part of job and will be considered in quoted rates. |
| 106 | M & L for openingofDual Media Filtertank, taking out old media from filter chamber cleaning the tank with using suitable chemical and cleaning all pvc nozzzel and painting the tank by using redoxide and reflling the mediawith replacement of following size media components complete all as specified and directed. (At Darjipura RO Plant) (a) 25 to 40mm Gravels- 750 Kg (b) 7 to 15 mm Gravels- 325Kg (c) 3 to 7 mm Gravels-325Kg (d) 1 to 3 mm Crushed quartz Sand-325Kg (e) Sand-325 Kg (f) Activated Carbon(900IV Carbon 4X8mm coconut shell) -250Kg Note : Welding cutting for opening of filter media is deemed to be included with unit rate of item. |
| 107 | Supply, Installation Testing & Commissioning of solenoid valve suitable for 15 mm GI pipe for Air releasing of pump including 15 mm. gate / ball valve with necessary GI fittings with following specifications complete all as specified and directed: Size: 15 mm Material: SS/ Forged Brass Type: Pilot operated, diaphragm type / direct acting type. Pressure rating: 4 kg / sq. cm. Normally closed Make: AVCON/ROTEX/ASCO/JOHNSON CONTROLS. |
| 108 | M & L for Removing, cleaning, replacement to wear and tear parts, servicing and overhauling for digital level sensors and reconnecting the same complete all as specified and directed |
| 109 | Supply and fix flat 4 Sqmm 3 Core flexible copper cable for submersible pump at RO plant ISI marked complete all as specified and directed |
| 110 | Supply and fix UPVC heavy grade spears 3" 336-030 SCH 40 WA1Q2/V2 complete all as specified and directed |
| 111 | Supply and fix in repair Gun metal Globe valve with SS stud andSS nut bolts of appropriate size for fixing of following sizes complete all as specified and directed |
| 112 | 50 mm dia bore |
| 113 | 25 mm dia bore |
| 114 | M&L for repair and replacement of acrylic sheet of automation panel fixed inside pump house at darjipura and complete maintenance and replacement of LED lights inside distribution scheme panel complete cleaning and making it functional complete all as specified and directed |
| 115 | M & F for cleaning and scraping the surface/walls of filter media and CIP tank, SS filter tank and SS heater unit complete and painting the plant other then pipes complete with proper coded colour as per the instruction of Engr-In-Charge complete all as specified and directed complete cleaning and painting of individual units at RO Plant will be part of quoted rates and will be considered under one job. |
| 116 | M & F for cleaning and scraping the surface/walls of RO Plant Shutter complete with proper silver colour(two coat) from inside and outside including greesing the moving part for proper working of shuttercomplete with welding of broken shutter as per the instruction of Engr-In-Charge complete all as specified and directed |
| 117 | S & F in replacement RO membrane module to deliver for 1000 ltr per hour output of treated water 8040 element , designed pressure of 600 psi incl testing after complention and taking out old unserviceable membrane complete all as specified and directed. Make- DOW / Hydronautic /koch U.S.A. |
| 118 | Maintenance and servicing (Including dismentaling the dosing equipment from existing place,cleaning the traces of chlorine/chemical used from PVC container, replacement of U/S component of dosing pump and refixing/reassambling all parts after complete cleaning and fixing to same location) of dosingequipments self priming , having discharge capacity upto 4 Ltr /Hrs of any make per month making the plant fully in serviceable condition consisting of the following locations :- Note : (i)Spares required for replacement will be measured and paid separately under respective items here in this schedule. (ii)Preventive maint and servicing ofchloronation plant for the libility period of30 days . After serviceing/preventive maint any defect occured in plant the contactor should attended the same within 24 hour, the cost of the same is deemed tobe included in unit rate of item. (iv)A chart showing periodical maintenance with last date of maintenance done and next due date of maintenance duly signed by concerned JE(E/M), AGE(E/M) and recordshall be maintened by the contractor and a similar register to be put at the time of billing.Any lapse in servicing will be considered seriously by the Engr-In-Charge and If contractor fails to rectify the complaint with in 24 hours after receiving, Rs 1500/- per complaint will be penalised.. |
| 119 | At RO plant Darjipura |
| 120 | Main pump house Darjipura |
| 121 | MAP Pump house Darjipura |
| 122 | Supply only PVC diapharm suitable for dosing pump at site (any size) complete all as specified and directed |
| 123 | Supply only PVC pipe of suitable size (thick material) for dosing pump as per site complete all as specified and directed |
| 124 | Supply onlyinjection valve suitable for dosing unit as per site complete all as specified and directed |
| 125 | Supply and fix PVC container (heavy duty) 100 ltr capacity complete all as specified and directed |
| 126 | M & L for testing of water sample at 4 location from authorised government laboratory for biological fitness of water on bimonthly basis including glass bottle for collection of sample. Note: Sample of water to be collected from wherever directed by Engr-In-Charge will be responsibility of contractor.(Water sample includes area such as swimming pool, borewell, RO Plant, STP(Pre and Post) , pump house) Note: Collection of sample from all the places at a time will be considered as one job each time. |
| 127 | Supply and fix On/Off switches, with NC connector and connectingup complete all as specified and directed Make Vaishno type-2 x VALSTR or equivalent. |
| 128 | Supply and fix Indicating LED lamp, having input 230 V, output 130V connecting up complete all as specified and directed Make Vaishno type-2 XVILR or equivalent. |
| 129 | Supply and fix Kit kat fuse upto 40A and connecting up complete all as specified and directedMake: Siemens 3NW20NNSF or equivalent of L&T / ABB / Havells. |
| 130 | Supply and fix MCB triple pole, 5 to 30 Amp, 415 V, 10 KA rating complete all as specified and directed Make: Siemens or equivalent of L&T / ABB / Legrand. |
| 131 | Supply and fix Air break 3 phase 415V power contactor AC operated, upto 25A, AC3 as per IS 13947 with auxillary contact arrangement and over load relay complete set and connecting up suitable for 5 to 20 HP water pump complete all as specified and directed Make:-Siemens or equivalent of CG / L&T / C&S. |
| 132 | Supply and fix Heavy duty switch disconnector fuse assembly, with fuse links, 50A complete as per IS 13947-3 and connecting up complete all as specified and directed Make: Siemens model no 3KL49-30-1YA00 or equivalent of L&T / ABB |
| 133 | Supply of water through tanker/bouser for domestic use including transportation from source to U/G sump Darjipura Afs Baroda. The water should have the following main factors :- (a) Water should be clear and free from all suspended matters both Hygenic & inorganic matter. (b) Water should be free from taste and odour. (c) Water should be colour less and no vegetable stain should be present. (d) Water should be soft that it should not contain dissolved impurities like calcium or magnesium bicarbonate and Sulphates. (e) Water should be soft and should be free from all pathogenic organism causing diseases. (f) Copy of gate entry at guard room with vehicle No date and time shall be submitted duly defaced by Engr in charge before claiming payment. Note : Water analysis duly tested by authorised lab will be rendered by supplier before supplying the water. |
| 134 | M&L for removal of existing materials in Quartz sand filter such as silica sand (0.35mm-0.60mm), pabbels (0.6mm-1.0mm) of various size and supply and lay all fresh materials such silica sand, pabbels of size 1 to 3mm, 3 to 7mm and various size as per site complete all as specified and directed Note: (i) Replacement of materials of quartz filter shall be done by proper authorised/registerd supplier. Make: UV Rich or equivalent. (ii) Contractor shall remain responsible for proper quality of filtered water for next one year. If filter found not working properly, the work to be redone by contractor without any extra cost. |
| 135 | M & L for Calcium Hypochlorite Granular (TCC-90 ) for chlorination of swimming Pool, ISI marked complete all as specified and directed.. |
| 136 | Supply and desolving ofalum for day to day filtration of water of swimming Pool , confirming to the relevent ISI marked complete all as specified and directed. |
| 137 | M & L forcopper sulphate for pool water, confirming to the releventISI marked complete all as specified and directed. |
| 138 | M & L for hydro chloric acid LR type suitable for swimming pool water complete all as specified and directd. |
| 139 | M & L for Nylon rope for Pool cleaner size of 20 mm dia, ISI marked complete all as specified and directed.. |
| 140 | S & F Suction/ deliverypipe (heavy duty) of size 50 mm dia for Pool cleaner, ISI marked complete all as specified and directed.. |
| 141 | Supply and fix in repairs fiber brush for suction sweeper of suitable size as per site for cleaning of swimming pool complete all as specified and directed . Make-: UV Rich or equivalent.make approved by GE |
| 142 | Supply and mixing of soda ash in swimming pool water treatment to acchive dezire PH value for water complete all as specified and directed |
| 143 | Supply and fix gun metal globe and checkdiaphragm valve (as per Existing model) for water supply purpose withdrilled flanged ends (internal cast 50mm boreconforming to IS 778/1980 marked Class-Iwith stainless steel spindle and iron wheel incl jointing material compete such as rubber packing of adequate size and requisite number of nuts, bolts and washers complete all as specified and directed Make:-KIRLOSKAR/LEADER/AUDCO |
| 144 | Supply and replace of net with frame and handle structure ISI marked complete for picking up floating leaves and small insects all as specified and directed |
| 145 | Material and labour for cleaning of water by means of muratic acid or PH booster(cristal bright solution) to maintain the PH of water at desired level and by using chlorine or whatever is required to maintain the pool water upto the approval of user and MES requirement of quality of water all as specified and directed |
| 146 | M & L for preparation/cleaning of old painted steel surfaces of any description such as suction line, delivery line, priming line, valves and Quartz sand filter complete with scraping out old painted surface and after that marking of flow direction along with two coats of synthetic enamelpainting complete all asspecified and directed . |
| 147 | Supply and fix in repair of pressure guage, range 0-100 PSI SS bourdon type 4", bottom connection 1/4" or 3/8" BSP(M) complete all as specified and directed. |
| 148 | M&L for repairing and servicing of leakages/blockage at flanges at various joints such as near pressure guage, motor, pipes and at various location inside Swimming pool plant premises by means of opening from joint and replacing flanges of required size and length complete with teflon tape and other accessories complete clearing of leakage complete all as specified and directed. Note: (i) Complete clearing of leakage at various locations of plant shall be considered under one job. (ii)Any spares other then flanges or teflon tape/ packings/gaskets etc shall be measured and paid under respective item. |
| 149 | Supply and fix in replacement of CIfoot valve ISI marked of size 80 mm dia for under ground sump suction CI/ GIline including nipple of suitable size, welding, connection and testing complete all as specified and directed. |
| 150 | Disconnecting unbolting and taking out existing monoblock pump set of 7.5 HP capacity, electric driven 3 phase 415volt including Re-fixing in the same position after repair with necessary screw and bolts complete all as specified and directed. |
| 151 | Rewinding of 7.5 HP centrifugal pump (Motor) 3 phase 415 voltwith super enamelled copper rewinding wire of suitable size/gauge and providing insulation including taking out the existing winding, varnishing, heating, testing complete all as required for completion of job complete all as specified and directed. |
| 152 | Supply and fix in repair of following parts for existing centrifugal pump set electric driven 3 phase 415 volt 7.5 HP having discharge 60000 LPH complete all as specified and directed |
| 153 | Motor cooling fan of existing make |
| 154 | Pump motor MS coupling |
| 155 | Cover bolts & washers |
| 156 | Pump bearing Make : SKF/UBC/TATA/FAG/ NBC |
| 157 | CI impellar suitable for existingpump set. |
| 158 | SS Sleeve (Gland Sleeve) |
| 159 | Pump shaft with studs and nuts for pump body. |
| 160 | Starter relay Make- L&T/SIEMENS or equivalent.make approved by GE |
| 161 | Magnet coil |
| 162 | Motor bearing Make : SKF/UBC/TATA/FAG/ NBC |
| 163 | Contactorfor starter. Make- Havells/L&Tor equivalent.make approved by GE |
| 164 | Supply of PH meter degital type, long life battery backup, plastic body, instunt result displaier for day to day water PH testing complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
