Purvanchal Vidyut Vitaran Nigam Limited has published Tender For The Work Of Installation Of Lt Fuse Protection Set On Distribution Transformers Under Business Plan2024-25In Area Under Electricity Urban Distribution Division-Iv, Gorakhpur. Submission Date for this Tender is 20-04-2024. Fuses Tenders in Gorakhpur Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 09-Apr-2024 | Time Extension | Date | 15-04-2024 |
2 | 15-Apr-2024 | Time extension-2 | Date | 20-04-2024 |
Sl. No. | Item Description |
1 | Installation of LT Fuse Protection unit for 100 kVA Transformer in area of EUDD-IV Gorakhpur under Business Plan :- |
2 | Supply and complete installation of SMC Box of size 450x375x200 mm for 100 kVA Transformer on Pole (Box made out of (Thermostate Plastic) Sheet Moulding Compound by the process of Hot Press Compression moulding confirming to IS: 13410, SMC base or Doors shall not soften or bend on Heating, Doors fitted to Base by concealed hinges, Thickness- 2mm, Tolerence : +/- 5%) including provision of LT Fuse Protection set suitable for 100 KVA Transformer(All material including Aluminium Lugs, Clamp, Nuts & Bolts etc shall be supplied by the contractor.) |
3 | Installation of LT Fuse Protection unit for 250 kVA Transformer in area of EUDD-IV Gorakhpur under Business Plan :- |
4 | Supply and complete installation of SMC Box of size 450x375x200 mm for 250 kVA Transformer on Pole (Box made out of (Thermostate Plastic) Sheet Moulding Compound by the process of Hot Press Compression moulding confirming to IS: 13410, SMC base or Doors shall not soften or bend on Heating, Doors fitted to Base by concealed hinges, Thickness- 2mm, Tolerence : +/- 5%) including provision of LT Fuse Protection set suitable for 250 KVA Transformer(All material including Aluminium Lugs, Clamp, Nuts & Bolts etc shall be supplied by the contractor.) |
5 | Installation of LT Fuse Protection Tailless unit with LT Pillar Box for 250 kVA Transformer in area of EUDD-IV Gorakhpur under Business Plan :- |
6 | Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :- |
7 | LT XLPE 1X400 Sq.mm. Cable |
8 | LT XLPE 1X120 Sq.mm. Cable |
9 | Supply and Complete Installation of Henley Type Tailless Unit 300 AMP in Box using LT XLPE 1X400 Sq.mm. Cable & LT XLPE 1X120 Sq.mm. Cable, LT Crimping Lug 400/120 Sq.mm., Nuts & Bolts etc (as per site requirement) on 11/0.4 KV Distribution Transformer. (Only LT XLPE 1X400 Sq.mm. Cable & LT XLPE 1X120 Sq.mm. Cable will be provided by Department) Specification of Henley Type Tailless Unit 300 AMPdescribed as below- 1. Henley Type MS Sheet duly painted grey enameled paint- MS of 18 SWG (54X4.5 inches) with holes as per requirement 2. 6 No. Insulator- Made of White Glazed Porcelain 3. 6 No. Copper Spring Contact- 32X3.7 mm Made of Copper 4. 3 No. "L" Contact - Brass 5. 3 No. Metal Part Connector For Holding Busbar- Brass 6. 1 No. Casted Patti- M.S. 7. 1 No. Neutral- Brass 8. Iron Clip, Bolt, Nuts, Washer and Screw etc for Tightening- All Galvanized 9. Copper Bus Bar Strip- 500X50X5 mm (3 Nos.Copper Busbar Strip to be used on 2 Nos. Tailless unit) 10. Aluminium Bus Bar Strip- 500X50X5 mm (1 No) All work will be done as per RESSPO Norms & relevent IS Specification. |
10 | Supply, fabrication, erection of LT Pillar Box for Tailless Unit after making Plinth of Height 300 mm above ground level LT Pillar Box Size- 1650X1050X520 mm with Gate and Proper Locking arrangement (Canopy of 15 Degree ) All work will be done as per RESSPO Norms & relevent IS Specification. |
11 | Installation of LT Fuse Protection Tailless unit with LT Pillar Box for 400 kVA Transformer in area of EUDD-IV Gorakhpur under Business Plan :- |
12 | Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :- |
13 | LT XLPE 1X630 Sq.mm. Cable |
14 | LT XLPE 1X120 Sq.mm. Cable |
15 | Supply and Complete Installation of Henley Type Tailless Unit 500 AMP in Box using LT XLPE 1X120 Sq.mm. Cable & LT XLPE 1X630 Sq.mm. Cable, LT Crimping Lug 120/630 Sq.mm., Nuts & Bolts etc (as per site requirement) on 11/0.4 KV Distribution Transformer. (Only LT XLPE 1X120 Sq.mm. Cable & LT XLPE 1X630 Sq.mm. Cable will be provided by Department) Specification of Henley Type Tailless Unit 500 AMPdescribed as below- 1. Henley Type MS Sheet duly painted grey enameled paint- MS of 18 SWG (54X5.5 inches) with holes as per requirement 2. 6 No. Insulator- Made of White Glazes Porcelain 3. 6 No. Copper Spring Contact- 38X3.8 mm Made of Copper 4. 3 No. "L" Contact - Brass 5. 3 No. Metal Part Connector For Holding Busbar- Brass 6. 1 No. Casted Patti- M.S. 7. 1 No. Neutral- Brass 8. Iron Clip, Bolt, Nuts, Washer and Screw etc for Tightening- All Galvanized 9. Copper Bus Bar Strip- 800X50X6 mm (3 Nos.Copper Busbar Strip to be used on 3 Nos. Tailless unit) 10. Aluminium Bus Bar Strip- 800X50X6 mm (1 No) All work will be done as per RESSPO Norms & relevent IS Specification. |
16 | Supply, fabrication, erection of LT Pillar Box for Tailless Unit after making Plinth of Height 300 mm above ground level LT Pillar Box Size- 1650X1050X520 mm with Gate and Proper Locking arrangement (Canopy of 15 Degree ) All work will be done as per RESSPO Norms & relevent IS Specification. |
17 | Installation of LT Fuse Protection Tailless unit with Masonry work for 250 kVA Transformer in area of EUDD-IV Gorakhpur under Business Plan :- |
18 | Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :- |
19 | LT XLPE 1X400 Sq.mm. Cable |
20 | LT XLPE 1X120 Sq.mm. Cable |
21 | Supply and Complete Installation of Henley Type Tailless Unit 300 AMP in Box using LT XLPE 1X400 Sq.mm. Cable & LT XLPE 1X120 Sq.mm. Cable, LT Crimping Lug 400/120 Sq.mm., Nuts & Bolts etc (as per site requirement) on 11/0.4 KV Distribution Transformer. (Only LT XLPE 1X400 Sq.mm. Cable & LT XLPE 1X120 Sq.mm. Cable will be provided by Department) Specification of Henley Type Tailless Unit 300 AMPdescribed as below- 1. Henley Type MS Sheet duly painted grey enameled paint- MS of 18 SWG (54X4.5 inches) with holes as per requirement 2. 6 No. Insulator- Made of White Glazed Porcelain 3. 6 No. Copper Spring Contact- 32X3.7 mm Made of Copper 4. 3 No. "L" Contact - Brass 5. 3 No. Metal Part Connector For Holding Busbar- Brass 6. 1 No. Casted Patti- M.S. 7. 1 No. Neutral- Brass 8. Iron Clip, Bolt, Nuts, Washer and Screw etc for Tightening- All Galvanized 9. Copper Bus Bar Strip- 500X50X5 mm (3 Nos.Copper Busbar Strip to be used on 2 Nos. Tailless unit) 10. Aluminium Bus Bar Strip- 500X50X5 mm (1 No) All work will be done as per RESSPO Norms & relevent IS Specification. |
22 | Construction of Masonry type Distribution Pillar Box 1 No. incoming and 3 No outgoing of size 1.2X1X0.6 Mtr. having Wall & RCC slab of thickness 0.1 mtr on it with supply, fabrication and fixing of 2 Nos. MS angle 50X50X6 mm (Across the Pillar).(All material shall be supplied by the contractor.) All work will be done as per RESSPO Norms & relevent IS Specification. |
23 | Installation of LT Fuse Protection Tailless unit with Masonry work for 400 kVA Transformer in area of EUDD-IV Gorakhpur under Business Plan :- |
24 | Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :- |
25 | LT XLPE 1X630 Sq.mm. Cable |
26 | LT XLPE 1X120 Sq.mm. Cable |
27 | Supply and Complete Installation of Henley Type Tailless Unit 500 AMP in Box using LT XLPE 1X120 Sq.mm. Cable & LT XLPE 1X630 Sq.mm. Cable, LT Crimping Lug 120/630 Sq.mm., Nuts & Bolts etc (as per site requirement) on 11/0.4 KV Distribution Transformer. (Only LT XLPE 1X120 Sq.mm. Cable & LT XLPE 1X630 Sq.mm. Cable will be provided by Department) Specification of Henley Type Tailless Unit 500 AMPdescribed as below- 1. Henley Type MS Sheet duly painted grey enameled paint- MS of 18 SWG (54X5.5 inches) with holes as per requirement 2. 6 No. Insulator- Made of White Glazes Porcelain 3. 6 No. Copper Spring Contact- 38X3.8 mm Made of Copper 4. 3 No. "L" Contact - Brass 5. 3 No. Metal Part Connector For Holding Busbar- Brass 6. 1 No. Casted Patti- M.S. 7. 1 No. Neutral- Brass 8. Iron Clip, Bolt, Nuts, Washer and Screw etc for Tightening- All Galvanized 9. Copper Bus Bar Strip- 800X50X6 mm (3 Nos.Copper Busbar Strip to be used on 3 Nos. Tailless unit) 10. Aluminium Bus Bar Strip- 800X50X6 mm (1 No) All work will be done as per RESSPO Norms & relevent IS Specification. |
28 | Construction of Masonry type Distribution Pillar Box 1 No. incoming and 3 No outgoing of size 1.2X1X0.6 Mtr. having Wall & RCC slab of thickness 0.1 mtr on it with supply, fabrication and fixing of 2 Nos. MS angle 50X50X6 mm (Across the Pillar).(All material shall be supplied by the contractor.) All work will be done as per RESSPO Norms & relevent IS Specification. |
29 | Installation of LT Fuse Protection Tailless unit with Masonry work for 500/630 kVA Transformer in area of EUDD-IV Gorakhpur under Business Plan :- |
30 | Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :- |
31 | LT XLPE 1X1000 Sq.mm. Cable |
32 | LT XLPE 1X120 Sq.mm. Cable |
33 | Supply and Complete Installation of Henley Type Tailless Unit 500 AMP in Box using LT XLPE 1X1000 Sq.mm. Cable & LT XLPE 1X120 Sq.mm. Cable, LT Crimping Lug 1000/120 Sq.mm., Nuts & Bolts etc (as per site requirement) on 11/0.4 KV Distribution Transformer. (Only LT XLPE 1X1000 Sq.mm. Cable & LT XLPE 1X120 Sq.mm. Cable will be provided by Department) Specification of Henley Type Tailless Unit 500 AMPdescribed as below- 1. Henley Type MS Sheet duly painted grey enameled paint- MS of 18 SWG (54X5.5 inches) with holes as per requirement 2. 6 No. Insulator- Made of White Glazes Porcelain 3. 6 No. Copper Spring Contact- 38X3.8 mm Made of Copper 4. 3 No. "L" Contact - Brass 5. 3 No. Metal Part Connector For Holding Busbar- Brass 6. 1 No. Casted Patti- M.S. 7. 1 No. Neutral- Brass 8. Iron Clip, Bolt, Nuts, Washer and Screw etc for Tightening- All Galvanized 9. Copper Bus Bar Strip- 800X50X6 mm (3 Nos.Copper Busbar Strip to be used on 3 Nos. Tailless unit) 10. Aluminium Bus Bar Strip- 800X50X6 mm (1 No) All work will be done as per RESSPO Norms & relevent IS Specification. |
34 | Construction of Masonry type Distribution Pillar Box 1 No. incoming and 3 No outgoing of size 1.2X1X0.6 Mtr. having Wall & RCC slab of thickness 0.1 mtr on it with supply, fabrication and fixing of 2 Nos. MS angle 50X50X6 mm (Across the Pillar).(All material shall be supplied by the contractor.) All work will be done as per RESSPO Norms & relevent IS Specification. |
35 | Repairing of Fence of Distribution Transformers for the Electrical safety of LT Pillar Box at different places in area of EUDD-IV Gorakhpur under Business Plan :- |
36 | Repairing of Fence of Distribution Transformers |
37 | Chemical Earthing of Distribution Transformers at different places in area of EUDD-IV Gorakhpur under Business Plan :- |
38 | Chemical Earthing of Distribution Transformers (Body+Neutral in one complete job) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail