Rural Works Department has published Tender For Construction Of Multipurpose Cyclone Shelter (Mcs) Building At Bhilla Of Kalyani G.P Under Cmrf In The District Of Balasore For 2023-24 .. Submission Date for this Tender is 09-04-2024. PEB Tenders in balasore Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | Providing & erecting necessary plants, equipments and labour for boring holes and casting of 375 mm dia bored d/uCast - in - situ single under reamed RCC piles etc. all complete as per the direction of Engineer in Charge.. |
| 3 | Earth work in excavation of fondation in all kinds of soil within the initial lead & lift including dressing & levelling the bed & depositiong the excavated earth away from the site etc. all complete as per the direction of Engineer in Charge. |
| 4 | Providing filling foundation and plinth with sand well watered and rammed with rammer including cost of all materials and labour etc. all complete as per the direction of Engineer in Charge. |
| 5 | Providing and laying Plain cement concrete (1:3:6) grade mix using portland slag cement in foundation and botton layers of flooring and below pile cap etc using 40mm size downgraded hard crusher broken granite aggregates etc. all complete as per the direction of Engineer in Charge.. |
| 6 | Providing, lifting, hoisting and laying PCC M20 grade mix using portland slag cement as per IS: 456 2000 in Foundation & Toe wall as per the drawing with 20mm hard crusher broken granite aggregates etc. all complete as per the direction of Engineer in Charge.. |
| 7 | Providing, lifting, hoisting and laying reinforced cement concrete of M30 grade mix to including centering and shuttering using 20mm down graded crusher broken HG chips including watering curing with all cost, carriage, labour, royalty, T&P etc complete. |
| 8 | Foundation (Pile Caps & Grade Beams) |
| 9 | Ground Floor |
| 10 | First Floor |
| 11 | Second Floor |
| 12 | Providing & fixinginposition High yielddeformedbars/ reinforcement confirming to Fe 500 grade of SAIL make with cutting, bending, binding, straightening,tyingand placing in position, usingbinding wire 18 to 20 gauge, cost & conveyance of materials,labour, T &Petc. complete as per direction of the Engineer-in-charge.(Ground Floor) |
| 13 | Providing strong rigid and levelled Centering & Shuttering to required shape and size for all kinds of RCC works mentioned in different items with steel centering and shuttering materials with all necessary bracing ties and supports with level centering covered with bituminous paper including provision of necessary holes and pockets electrical conduit pipe, PH pipes, Fan hooks or boxes, switch and board insert plates, clamps and extension bars etc. as per the direction of the Engineer - in - charge and dismantling and removing after the required interval from thedate of casting, including cost of all materials with transportation, taxes, loading and unloading etc and all labour, sundries, T&P scaffolding etc complete as per approved specification. |
| 14 | Foundation (Pile Cap & Grade Beam) |
| 15 | Ground Floor |
| 16 | Columns & Beams |
| 17 | Roof Slab |
| 18 | Staircase |
| 19 | Lintel, Chajja, Ramp & Parapet Railing |
| 20 | First Floor |
| 21 | Columns & Beams |
| 22 | Roof Slab |
| 23 | Staircase |
| 24 | Lintel, Chajja, Ramp & Parapet Railing |
| 25 | Second Floor |
| 26 | Columns & Beams |
| 27 | Roof Slab |
| 28 | Lintel & Chajja |
| 29 | Providing Fly ash brick masonary in C.M.(1:6) with fly ash brick of approved quality and sizeincluding racking out joints, splays, cutting, circular moulding with cost & conveyance of materials, labour ,T&P, royalty, taxes, curingetc. complete as per direction of the Engineer-in-charge. (In Foundation) |
| 30 | Foundation & Plinth |
| 31 | Ground Floor |
| 32 | First Floor |
| 33 | Second Floor |
| 34 | Providing Fly ash brick masonary in C.M.(1:4) with fly ash brick of approved quality and sizeincluding racking out joints, splays, cutting, circular moulding with cost & conveyance of materials, labour ,T&P, royalty, taxes, curingetc. complete as per direction of the Engineer-in-charge. (In Foundation) |
| 35 | First Floor |
| 36 | Providing average 25mm thick grading concrete (1:2:2) with portland slag cement (PSC) using 2% water proofing cement compound over 2 coats of polymer paint. |
| 37 | First Floor |
| 38 | Providing 12mm thick cement plaster with cement mortar (1:4) using portland slag cement (PSC) to outside surface. |
| 39 | Ground Floor |
| 40 | First Floor |
| 41 | Second Floor |
| 42 | Providing 16mm thick cement plaster on the rough side of brick masonry wall with cement mortar (1:6) using portland slag cement (PSC) including racking out joints upto a depth of 12mm. |
| 43 | Ground Floor |
| 44 | First Floor |
| 45 | Second Floor |
| 46 | Providing 6mm thick cement plaster with cement mortar (1:4) using portland slag cement (PSC) over a coat of cement wash to ceiling of roof slabs, stair, landings, chajja, shelf and lofts etc. |
| 47 | Ground Floor |
| 48 | First Floor |
| 49 | Second Floor |
| 50 | Supplying, fitting and fixing 100mm dia PVC rain water down pipe of medium duty including PVC bend, shoe, fixing with clamp, cutting holes in parapet making good to the damages in CC (1:2:4) with portland slag cement (PSC). |
| 51 | Finishing wall suface of walls with Acrylic wall putty (Water based) of approved make and finshed smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes. Labour T & P etc complete. |
| 52 | Ground Floor |
| 53 | First Floor |
| 54 | Second Floor |
| 55 | Painting over interior plastered surfaces with 2 coats of Plastic emulsion paint of approved quality and shade using the required quantity of paint over 1 coat of primer. |
| 56 | Ground Floor |
| 57 | First Floor |
| 58 | Second Floor |
| 59 | Painting over exterior plastered surfaces with 2 coats of synthetic weather coat paint of approved quality and shade using the required quantity of paint over 1 coat of primer. |
| 60 | Ground Floor |
| 61 | First Floor |
| 62 | Second Floor |
| 63 | Providing and Painting wall Surface one coat with wall Primer to give an even shed before applying paint to walls including cost of Primer , labour, T&P all comp. |
| 64 | Ground Floor |
| 65 | First Floor |
| 66 | Second Floor |
| 67 | Supplying, fitting & fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame shutters, and all fittings and fixtures etc. complete ref. A/R-2022-p-236 item-13 |
| 68 | Factory made GIRID FRP or called GRP sandwich compositedoor shutterof 32mm thick laminated with two GRP skin with good grain finishfabricated using UV stabilised isoppthalic gel coat and one layer of 450 gsm E-glass chopped strand mat (CSM) impregnated with ortopathilic resin The thickness of the skins shallnot be less than 1.50mm . Expanded polysryne ( EPS) structural foam panel of 29 mm tickness and a density of 20kg/cu.mts shall be used as core material wooden reinforcements made of sesasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fitting the metal fittings such as lower bolts ,aldrops, handles etc. shall be provided . A structural adhesive compatible with (EPS)foam shall be used for bending the core material. the sal wood reinforcements and the skin The material and process for manufactuing te door shutter shallconform to RV -TIFAC components design centre"s standards and specification and the door shutters tested in conformation to IS 4020-1998. The Finish of door shutter will be plain colour as per specificationand direction of the EngineerinCharge. etc. complete |
| 69 | Factory made FRP( Altematly called GRP) door frame of size 75mm x 100mmfabricated using E - glass chopped strand mat (CSM) U.V stabilised inopathalic Gel coat and impregnated with inopathalic resin The thickness of the GRP skins shall not be less then 2.0 mm . The door frame consists of four segments which are provided with plug insocketarrrangement in-situ-in mould. The segments are plugged in and are joined together by means of srew. The GRP frame shall be provided with wooden reinforcement on six locations for high srew holding capacity for fixing metalic hold fast and shall be consolidated by filling with medium density foam / plaster of paris with fibre reinforcement , six number of 260mm x 25mm x 5mm size "S" shaped M.S flat holdfast shall be provided with the frame. The material and process for manufacturing the finish of door frame shall conform to RV-TIFAC composites Design centre"s standards and specifications . The finish of door frame will be plain colour white /Ivory/Beige/Light grey / Golden brown / Mahogany/ Teak wood /sand stone Champagne/Pastel blue or any other colour using high quality pigment complete in all respect as per specification and direction of the Engineer in Charge.etc. complete |
| 70 | Supplying, fitting & Fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame shutters and all fiting and fixtures.ref. A/R-2022-p-236 item-12 |
| 71 | Supplying & fixing of MSWI clamps of 6mm x 25mm x 230mm size including cutting holes in walls etc.complete as per specification and direction of Engineer-in-charge. |
| 72 | Fabricating & fixing of MS Grill (structural steel) for main entrance in the staircase with 40mm x 40mm x 6mm angle frame with double leaf and 10mm square bars forming a square mesh including cost of all material, cost of welding rod with all labour etc. complete. |
| 73 | Two coats of Painting with one coat of primer with approved quality and shade of paint conforming to IS on Steel and Wood Work. |
| 74 | Kota stone flooring with minimum 16mm thick kota stone dressed and polished bottom coated with cement slurry and fixing in flooring on 25mm thick bed of cement mortar (1:1) mix and joints filled with grey cement slurry etc complete in all respect as per Technical Specification. |
| 75 | Ground Floor |
| 76 | First Floor |
| 77 | Kota tile in dados with minimum 16mm thick kota stone dressed and polished bottom coated with cement slurry and fixing in dados on 12mm thick bed of cement mortar (1:3) mix and joints filled with grey cement slurry etc complete in all respect as per Technical Specification. |
| 78 | Ground Floor |
| 79 | First Floor |
| 80 | Fixing walltile in dados with minimum 16mm thick kota stone dressed and polished bottom coated with cement slurry and fixing in dados on 12mm thick bed of cement mortar (1:3) mix and joints filled with grey cement slurry etc complete in all respect as per Technical Specification. |
| 81 | Fixing tiles in ceramic Floor on 25mm thick bed of Cement mortar 1:1 jointed with neat white cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles as per direction of Engineer - in - charge. |
| 82 | Making Grooves of 3mm deep & 10mm wide on plastered surface at all joints of concrete & Brick Masonry. |
| 83 | Cement concrete block pitching with CC M20 of 100mm thick of required size as approved by the Engineer - in - charge in slope and approns. |
| 84 | Providing Black board of size 2.0m x 1.5m over brick walls with 20mm thick CP in (1:4). |
| 85 | Fixing a Marble Plaque of size 5" x 2.5" x 1" with engraving informations for users as per direction of the Engineer - in - charge. |
| 86 | Conducting pile load testing on working piles |
| 87 | Supplying, fitting & fixing of 40mm dia stainless steel pipe in the handrail of ramp in the walls of toilet for sick personnel including cost of materials, labour and taxes etc complete. |
| 88 | Providing and fixing Chequrred tiles in floors, treads or steps and landing on 25 mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tilescomplete including cost of tiles as directed by the Engineer-in-charge. |
| 89 | Clearing & grubbing road land in area of light jungle including uprooting rank vegetation, grass, bushes, shurbs etc. Including disposal etc. complete as per direction of the Engineer-in-charge. |
| 90 | Providing NCRMP Logo sign Boardetc. complete as per direction of the Engineer-in-charge. |
| 91 | Construction ofun-reinforcedplain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M-30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design,laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction, expansionand construction joints, applyingsealant,admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawingand Technical Specification as per direction of the Engineer-in-Charge. |
| 92 | Construction of embankment in hard soil with carriage by mechanical means including consolidation with H.R.R. etc. complete to shape as per direction of Engineer-in-charge. |
| 93 | PH |
| 94 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling or floor P.V.C pipes conforming to ASTM-F-441(Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling,and floor, testing all complete as per specification and the direction of the E.I.C.- 20mm dia C-P.V.C. pipe [Internal] |
| 95 | 25mm dia C-P.V.C. pipe [Internal] |
| 96 | 32mm dia C-P.V.C. Pipe[External] |
| 97 | 40mm dia C-P.V.C. pipe[External] |
| 98 | supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for takingwater supply pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of E.I.C.-- 250mm thick walls |
| 99 | supplying all materials, labour, T&P and cutting holes in R.C.C walls,Floors, roofs for taking water supply pipes and fittingsincluding making good the wall, ceiling,and floor, testing all complete as per specification and the direction of the E.I.C. |
| 100 | Supplying all materials,labour,T&P and cutting grooves in pucca floors and walls for taking G.I./ P.V.C pipes and making good the damages all complete as per specification and the direction of the E.I.C. |
| 101 | Supplying all materials, labour, T&P and fitting and fixing Brass/CP fittingsof the following nominal bore with supply of all jointing materials etc. all complete as per specification and the direction of the E.I.C.- 15mm dia. C.P Bibcock (Short body) with C.P Flange [Jaquar] |
| 102 | 15mm dia. C.P Bibcock (long body) with C.P Flange [Jaquar] |
| 103 | 15mm dia.C.P angle stopcockwith C.P Flange [Jaquar] |
| 104 | 20mm dia.C.P concealed stopcockwith C.P Flange [Jaquar] |
| 105 | 15mm dia C.P pillarcock [Jaquar] |
| 106 | 15mm dia C.P. Two Way Bib Cock with C.P Flange[Jaquar] |
| 107 | 15mm dia C.P. Health Faucet [Jaquar] |
| 108 | 15mm dia C.P Extension piece. |
| 109 | 25mm dia.PVC ball valve [Metal Ball] |
| 110 | 32mm dia.PVC ball valve[Metal Ball] |
| 111 | 40mm dia.PVC ball valve[Metal Ball] |
| 112 | Supplying all materials, labour T&P and fitting and fixing of C.P Shower with 15mm or 20mm inlet with C.P Shower arm including polishingetc all complete as per specification and direction of the E.I.C-15mm dia.C.P revolving shower |
| 113 | Supplying all materials, labour, T&P and fitting and fixing SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches with earth work including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer"s specification, testing etc all complete as per P.H specification and direction of the E.I.C. --110mm dia SWR pipe |
| 114 | 75mm dia SWR pipe |
| 115 | 110mm dia SWR P trap |
| 116 | 110mm dia SWR door Tee |
| 117 | 110mm dia SWR plain Tee |
| 118 | 110mm dia. SWR Door bend |
| 119 | 110mmdia. SWR Plain/Shoe bend |
| 120 | 110mm dia. SWR Cross door Tee |
| 121 | 110mm dia. SWR Offset. |
| 122 | 110 mm dia. SWR Cowl |
| 123 | 125mm dia. C.P. Grating |
| 124 | 75mmdia.SWR Plain tee |
| 125 | 75mm dia. SWR Door bend |
| 126 | 75mmdia. SWR Plain/Shoe bend |
| 127 | 50mm dia SWR pipe |
| 128 | 50mm dia. SWRPlain bend |
| 129 | supplying all materials, labour, T&P and cutting holes throughbrick/stone masonry walls for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C.Necessary Jointing Materials fixing to coloums , wall wih Pipe clip and/ or Ironclamps , nails at internvals of 750mm or part thereof all complete.-- 250mm to 375mm thick wall |
| 130 | supplying all materials, labour, T&P and cutting holes through R.C.Cwall, floors, roof for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C. |
| 131 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal etc all complete as per specification and direction of the E.I.C.- 580mm Orissa pan(Neycer/Cerra/ Parry ware/ Hindware) |
| 132 | Supplying all materials, labour T&P and fixing Wash Down Water Closet(European type W.C. pan) with Integral ‘S’ or ‘P’ trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.C--E.W.C. with ‘S’ trap Plain(Neycer/Cerra/ Parry ware/ Hindware) |
| 133 | Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Neycer/ Cerra/Parry ware/ Hindware) |
| 134 | Supplying all materials, labour T&P and fitting and fixing 10 Ltrs capacity PVC low level flushing cistern with a pair of C.I. or M.S.brackets complete with fittings such as syphonic arrangement, 15mm nominal size Brass/PVC ball valve with polythene float, CP/Brass handle, unions and couplings for connection with inlet, outlet, overflow pipes, 32mm dia PVC flush bend, 15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C(Neycer/ Cerra/Parry ware/ Hindware) |
| 135 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with C.I. or M.S.brackets painted white, with 32 mm dia CP waste, 32mm dia PVC waste pipe, including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, etc all complete as per specification and direction of the E.I.C.- 550mm x 400mm WHB with all Fittings with C.P. Waste, PVC Waste Pipe & Connection Pipe. (Neycer/Cerra/ Parry ware/ Hindware) |
| 136 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C.- 600mmx400mm B.E Mirror (fixed type) |
| 137 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail/ring, coat hook complete withCP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C- CP Towel Rail with hook. |
| 138 | CP towel ring |
| 139 | Providing and fixing Stainless Steel Horozontal /Vertical Grab Bar 600mm length fixed to PVC Cleats with C.P. brass Screws wherever required with approved make & quality and as per the direction and to the satisfaction of Engineer-in-charge. |
| 140 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C |
| 141 | Supplying all materials, labour T&Pand fixing bowl pattern urinal including the connecting the urinal with waste pipe by means of white lead list with chopped hemp etc. all complete as per direction of E.I.C.-- Flat back lipped wall urinal (standing Urinal) including 32mm dia PVC Waste Pipe with brass coupling nut & 15mm dia PVC inlet connection Pipe [Neycer/CerraParrywear/Hindware] |
| 142 | Supplying all materials,labour, T&P and fixing glazed earthen ware Squatting plate size 450x350 mm with integral longitudinal flushing pipe including embedding the plate in 25mm thick cement mortar (1:8) laid over PCC (1:5:10) using 40 mm size metal etc all complete as per specification and direction of the E.I.C. 450 x 350 mm Squatting Urinal (Ladies) [Neycer/Cerra/Parrywear /Hindware] |
| 143 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C.[First Floor] |
| 144 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in floors, on 25mm thick bed of cement mortar 1:1 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C..[First Floor] |
| 145 | Supplying all materials, labour T&Pand fixing Marble partition wall for Urinal with cutting grooves on walls and making good the damagesincluding rubbing and polishing complete as per specification and direction of E.I.C. (1st Floor) |
| 146 | Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated usingE-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size "S" shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre"s standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/ Champagne/ Pastel blue or any other colour using high quality pigmentscomplete in all respect as per specification and direction of the E.I.C |
| 147 | Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gel coat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrene(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre"s standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy weight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 148 | Earthwork in all kinds of soil in excavation of foundation trencheswithin 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. - Initial lift up to 1.50m[100 User] |
| 149 | From 1.50m to 3.00m depth |
| 150 | Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C.[100 user S.T] |
| 151 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.-- .[100 user S.T] |
| 152 | Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.- .[100 user S.T] |
| 153 | Supplying all materials,labour, T&P and providing Brick work with Fly Ash Brick having crushing strength not less than 75 Kg/CM2with dimensional tolerence of +/- 8% in C.Mincluding watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.- In F&P in c.m(1:3) (st-100) |
| 154 | In Super structure in c.m(1:4) |
| 155 | Supplying all materials, labour, T&P and providing reinforced cement concrete (1:1.5:3) with 12mm size H.G chips for R.C.Cworks including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.-- Ground Floor |
| 156 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.-- Ground Floor |
| 157 | Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.- Ground Floor |
| 158 | Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.- 20mm thick C.P (1:3) G.Floor |
| 159 | 12 mm thick C.P in C:M (1:3) |
| 160 | Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.Ground Floor |
| 161 | Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works includingwatering curring and conveyance of all materialsto work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.Ground Floor |
| 162 | Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth includingwatering, ramming etc all complete as per direction of the E.I.C. |
| 163 | Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C.bafflewall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.Ground Floor |
| 164 | Supplying all materials, labour, T&P and providing & fixing P.V.C Tee in wall including filling the necessary with P.C.C(1:2:4)using 12mm size HG chips all complete including watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per direction of the E.I.C.- 16O mmXI 60mm X160mm PVC Tee |
| 165 | Supplying all materials, labour, T&P and making M.S. Step Iron in 20mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded inC.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C. |
| 166 | Supplying all materials, labour, T&P and providing pre-cast R.C.C. manhole cover with C.C (1:1.5:3) of 12mm size chips includingconveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.- (size- 550mmx550mmx76omm |
| 167 | Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:1.5:3) mix using 12 mm size H.G chips, foundation concrete (1:3:6) using 40 mm size HG metal on bed and around trap , !st class Fly Ash Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap &C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C.- Inside size 250mmx250mm Gully Trap Chamber |
| 168 | Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes withcement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class Fly Ash Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips,12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, paymentof royalty, taxes etc. all complete as per approved specification and direction of E.I.C- Inside size 750mmx750mm x450mm Inspection Chamber |
| 169 | Addle.depth |
| 170 | Supplying all materials, labour, T&P and constructing Manhole Chamber of the following sizes withcement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class Fly Ash Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips,12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, paymentof royalty, taxes etc. all complete as per approved specification and direction of E.I.C- Inside size 900mmx900mmx900mm Manhole Chamber |
| 171 | Addle.depth of 0.15 Mtr. |
| 172 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with pre cast R.C.C ringsjoined loose , gravel backing in the rear of well stening , pre cast R.C.C cover Slabs in C.C (1:2:4)using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.- 0.90mdia.x 2.10m deep RCC Ring Soak Pit. |
| 173 | 1.20mdia.x 2.10m deep RCC Ring Soak Pit |
| 174 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brickwalling from bottom upto invert of inlet pipe and 1st class Fly Ash brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.- 1.80mdia.x 2.00m deep Soak Way Pit |
| 175 | Supplying all materials, labour, T&P and laying ofSWR (Type-B) soil waste pipes of the following internal diameter conforming to I.S.No-13592/1992in trenches of the depth upto 1.20 mtr including jointing with supply of approved rubber lubricant by non-heat application method on bedding with 150mm thick C:C (1:3:6) using h.g metal of 25 mm to 40 mm and then making allround encasing includingearthwork in excavation in all kinds of soil with refilling of trenches watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per direction of the E.I.C.- 110mm dia.with Allround concrete encasing. |
| 176 | 160mm dia.with Allround concrete encasing. |
| 177 | Sinking of 125x100mm dia tube well through Hand boring Method Supplying all materials, labour, T&P and setting up boring equipments including irrection of suitable stagging for installation of the required size of tube-well. Dismantling & removing the same after completion of the work including transportation of boring equipments clearing & leveling the site, excavation of mud pit channels etc., leveling of site all complete as per direction of E.I.C(Labour) |
| 178 | Supplying all labour, T&P & transportation of boring pipes, top casing, grouping pipes, PVC pipes and fitting, PVC well screens, cement, betoniteetc. including loading and unloading etc. complete as per direction of the E.I.C.(Labour) |
| 179 | Supplying all labour, T&P and drilling pilot bore not less than 102mm dia without casing pipes in all kinds of soil and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments extra sockets etc.and withdrawing the boring pipes washing & keeping the bore clear for logging if required all complete as per the direction of EIC-- Pilot bore 100mm dia (00 mtr. to 360 mtr.) |
| 180 | Supplying all labour, T&P & reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc. all complete as per direction of E.I.C. -100 mm ot 150 mm dia( 00 mtr to 360 mtr) |
| 181 | 150 mm to 200 mm dia( 00 mtr to 360 mtr) |
| 182 | 200 mm to 250 mm dia( 00 mtr to 360 mtr) |
| 183 | Supplying all labour, Tools and plant and lowering the 300mm dia top casing pipe into position and removing the same after use as per the direction of Engineer-in-charge. |
| 184 | Supplying all labour, T&P and jointing materials and lowering the PVC casing pipes fitting and well screens in position including fitting of centralizer cutter plugs and washing the bore as per the direction of E.I.C.(Including cost of Materials)125 mm dia PVCPipe (Schedule-80) |
| 185 | 100 mm dia PVCPipe (Schedule-80) |
| 186 | 100 mm dia PVC strainer |
| 187 | 125x100 mm dia PVC R/S |
| 188 | 100 mm dia PVC Cone |
| 189 | Lowering of 125mm/100mm dia PVC Pipe |
| 190 | Supplying all labour, T & P and packing the bore with washed gravel ( size-P-6) around the pipes in good quality including cost of gravel etc. all complete as per direction of Engineer-in-Charge- |
| 191 | Cost of Gravel |
| 192 | Supplying all labour, T&P materials and providing sanitary sealing by cement slurry groutingaround the uppermost 3.00 mtrs. of 125 mm dia PVC casing pipe .including cost of cement all complete as per direction of E.I.C(including cost of 2 bags of Cement) |
| 193 | Cleaning the developing the tube well using compressor continuouslyto get clear and adequate dischargefrom the tube well including the supply and use of all necessary equipment and labour as per direction of E.I.C(Labour Charges) |
| 194 | Supplying all labour, T&P and materials for fitting and fixing of India Mark-II Deep well Hand Pump with cast Iron cylinder, 12mm/16mm dia B.S. Connecting rod, 32mm dia G.I.Pipe of required lengths with supply of extra socket of approved make all complete including carriage, coveyanceas per direction of Engineer-in-charge. |
| 195 | Supplyingall labour, T&P and materials for Construction of Masonary Platform for India Mark-II Hand Pump as per I.S. Specification of 1.85 mtrOutside with Cement Concrete (1:2:4) with 12mm size hard granite C.B. chips etc. all complete including 760mmx760mmx400mm deep cement concrete embeded around the bore well pipe as per direction of Engineer-in-Charge. |
| 196 | Supplying all materials, labour, T&P and construction of 100mm wide waste water drain for India Mark-II Hand Pump platform as per UNICEF design and specification with C.C (1:2;4) using 12mm size hard granite crusher broken chips etc. all complete as per direction of Engineer-in-Charge. |
| 197 | Supplying of ISI Mark 1.50 HP Single Phase Vertical Submersible Pump Set with Discharge of 2300-3000 liter/hour and a head of 45-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charage. |
| 198 | Supplying all labour, T&P and fitting and fixing of 1.50 HP Single phase vertical Submersible Pump Set with commissioning and testing, Electrificationetc. all complete as per direction of EIC |
| 199 | Supplying and fitting and fixing of ISI Mark DOL Starter of reputed make like BCH or Equivalent for 1.50 HP Single Phase Submersible Pump including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charge. |
| 200 | Supplying and fitting and fixing of three core flat cable (2.5mm2) of ISI Make of reputed company line BCH/Finolex or Equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charge. |
| 201 | Supplying and fitting & fixing of Plastic rope, M.S. Well Cover, M.S. Clamp, Stainless Steel Short piece, Bend & Socket including all const, conveyance and taxes etc. all complete as per direction of engineer-in-charge. |
| 202 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC Pipes conforming to ASTM-D-1785/89(sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and direction of E.I.C-32mm dia HDPE Pipe [Inside Tw] |
| 203 | 32mm dia HDPE Pipe [External Including Earth Work] |
| 204 | EI |
| 205 | Wiring |
| 206 | Recessed wiring to Light point/Exhaust Fan Point with 1.5 sqmm, FR PVC Insulated single core multistrand copper conductor of ISI marked with 20 mm dia non- metallic PVC flexible conduct with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front Bakelite cover of suitable size,MS box with 1.0 sqmm FR PVC insulated single core multistrand copper conductor and earth wire incouding all accessories and connection as per direction of engineer in charge (Make of wire = Finolex/L&T/ Anchor/ V-Guard) deducting the cost of S/F 100 mm x 100 mm x 60 mm M.S. Box with backlite cover-1 No.)Group A 1.2.1-1.24.2 |
| 207 | -do- Group A |
| 208 | -do- Group B |
| 209 | -do- Group C |
| 210 | Recessed wiring to Fan Point in... |
| 211 | -do- Group B |
| 212 | -do- Group C |
| 213 | Recessed wiring to Exhaust Fan Point in….. |
| 214 | -do- Group C |
| 215 | S/F of fan hook "S" type made of 16 mm MS rod for fixing in the Existing RCC Roof. |
| 216 | S/F of Angle holder replacing Ceilling Rose |
| 217 | Swich Boards |
| 218 | S/F of 5A. Modular Switch & 5A.Modular Socket outlet of ISI marked on existing board |
| 219 | S/Fof metal box of 150 mm x 75mm x 60mmdeep (Nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amp. Socket out let 5/6amp. Piano type switch,connection,painting etc. as required (1.26) |
| 220 | S/F of metal box of 180mm x 100mmx60mm deep (Nonunal size) in recess with suitable size of Phenolic laminated sheet cover in front including providing and fixing 3 pin 15/16 amp. Socket out let 15/16 amp. Piano type switch,connection, painting etc. as required(1.27) |
| 221 | S/F of 1 no of 3 pin 15/16 amp.Socket , 1 no of switch & 1 no of15/16A top with modular mini MCB, in (180mmx100mmx60mm)deep M.S box with B.K cover with connection, painting etc as requiredfor Inverter connection |
| 222 | S/F to 16/18 SWG metal box of following sizes (normal sixe) in recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required. |
| 223 | ..do- 200mmX150mmX60mm deep (1.24.7) |
| 224 | -do-200mmx250mmx75mm deep(1.24.9) |
| 225 | -do-250mmx300mmx100mm deep(1.24.13) |
| 226 | Sub-Main |
| 227 | Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire -Finolex/L&T/Anchor/Havels/V-guard) |
| 228 | 2x1.5+1x1.5 (1.8.1) |
| 229 | 2x2.5+1x1.5 (1.8.2) |
| 230 | 2x4+1x1.5 (1.8.3) |
| 231 | 2x6+1x2.5 (1.8.4) |
| 232 | Circuit Breakers |
| 233 | S/F of "B/C/D" series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge)240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) |
| 234 | S/F of "B/C/D" series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge)240Volt for lighting and other loads in the 2 Way double door MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required(2.6.2a)+(2.3.1b) |
| 235 | Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) |
| 236 | S/F of MCB 4 way Single door (2.3.1(a) |
| 237 | S/F of MCB 8 way Single door (2.3.2) |
| 238 | Main switches |
| 239 | Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) |
| 240 | S/F of 63A. ICTPN main switch (2.15.3) |
| 241 | Earthing |
| 242 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
| 243 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 244 | Fittings |
| 245 | Supply, Installation, Testing & Commissioning of exhaust fan upto 225 mm sweep in the exising opening, including making the hole to suit the size of the above fan making good the damaged complete, connection, etc as required. (1.43) |
| 246 | S/F of 18-25Watt L.E.D Tube light fittingwith all accessories and connections (Make:HPL-Neptune Havells-Elite LED Pride Plus/PAC/Crompton-RetroPLL |
| 247 | Supply of 1200mm A.C. Ceiling fan with all accessories and connections with out fan regulator (Make:Usha-Striker Neo/Crompton-HS /Anchor-Turbo speed star/Havels-Samrat ES/Orient-Summer Breeze pro/Great white-Aldous/Pollycab-Vital HS ) |
| 248 | S/F step type modular fan regulator |
| 249 | Supply & fixing of superior type Led bulk head fitting general domestic use ISI marked square / oval typeincluding necessary connections. ( M-5 ) |
| 250 | Supply & Fixing of 60 Watt single L.E.D street light fittingwith LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
| 251 | S/F of10w Watt LED Bulb |
| 252 | Cables |
| 253 | Provision of Armoured cable size 3 1/2 x 35sqmm (25) |
| 254 | Laying of MV cable upto 25sqmm in ground (5.1.1) |
| 255 | Laying of MV cable upto 25sqmm on surface (5.5.1) |
| 256 | S/M of end termination of LV/MV cable size 3 1/2 x35 sqmm (5.8.21) |
| 257 | S/F of 40mm HDPE pipe for cable laying and protection. |
| 258 | Panels |
| 259 | Supply & fixing of 63A TPNPanel board 1.63A MCCB (Make- Legrand/Seimens/L&T/C&S/) 2.63A kitkat & bus bar 3. 32A DP MCB- 4 nos 4. 63 A 4P load changeover switch (Legrand/Seimens/L&T/C&S)- 1nos 5. Digital Volt meter & Ameter three phase 6. All accesories & Connection (Rating & Danger borad) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
