Military Engineer Services-MES has published Tender For Repair To Roof Treatment, Leakage / Seepage, Sunken Floor And Allied Works In New And Old Project Area At Af Stn Manauri. Submission Date for this Tender is 27-04-2024. Tile Flooring Tenders in manauri Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-04-2024 |
| Sl. No. | Item Description |
| 1 | S&F in replacement GI water tubing/pipe 15 mm bore with alll fittings fixed to wall or laid in floors or celings including taking out old rusted pipes in any position compete all as specified & directed. |
| 2 | S&F in replacement GI water tubing/pipe 20 mm bore with alll fittings fixed to wall or laid in floors or celings including taking out old rusted pipes in any position compete all as specified & directed. |
| 3 | Taking down existing water proofing treatment and cleaning sunken floor by washing and rubbing etc and removing the material retrieved to a distance n.exc 500m where directed and providing water proofing treatment to sunken floors all as given below in Item No. 3.01 compete all as specified & directed. |
| 4 | Note for item No. 3.00 : (a) Making fillet of size 25mm x 25mm at corner of slab and wall with polymer modified cementitious (PMC) mortar consisting of one part of tapecrete P-151, two parts of cement and 6 parts of fine sand by weight. (b) Sealing joints of pipe with epoxy putty CICO POXY LC or epoxy mortar CICO POXY 2125. (c) Cleaning the concrete surface by brushing and watering and applying a coat of tapecrete P-151 Acrylic Modified Cementitious slurry consisting of one part of TAPCRETE P-151 and two parts of cement by weight. The coating shall be carried out upto 300mm above FFL and shall be allowed to dry for 4-6 hours. (d) Applying a coat of TAPCRETE brush topping 1.5mm thick consisting of one part of TAPECRETE P-151, two parts of cement and two parts of silica sand by weight and cured for 2 days. (e) Applying 15mm thick plaster in CM 1 : 4 mixed with CICO super at 100ml per 50 kg cement on treated surface (f)Filling the sunken portion with PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) upto required level complete all as specified and directed. Note: PCC filling shall be measured & paid separately under respective item. |
| 5 | M&L for Filling the sunken portion with PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) upto required level compete all as specified & directed. |
| 6 | M&L preparation of roof treatment with APP polymeric water proofing membrane all as given below :- (a) Dismantling of brick bats/tiles set in cement/lime mortar in roofs including bedding layer/mud phuska, roof treatment, PCC padding, benchingetcand disposed off rubbish out of MD land complete all as specified and directed. (b) M & L for plastering 10mm thick in CM 1:3 using 100% coarse sand on roof surface including water proofing compound as per manufactures instructions and as directed by Engr-in-Charge. (c) Applying a coat of bituminous primerconforming to IS:3384-1986 @ 0.40 Ltrs/Sqm and allow to dry. (d) Applying and laying 3mm thick APP membrane having non oven polyester mat at core and covered with high quality polymeric asphalticprotected with thermo fusible HMHDPE film on both sideand over laps 10cm and 15cm longitudinal and trasverse directions respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and grove sealed with cement mortar 1:3. (e) Applying two coats aluminium paint over membrane @ 1.20 Kg/Sqm compete all as specified & directed. |
| 7 | M&L preparation of roof treatment with APP polymeric water proofing membrane with roof tiles all as given below :- (a) Dismantling of brick bats/tiles set in cement/lime mortar in roofs including bedding layer/mud phuska, roof treatment, PCC padding, benchingetcand disposed off rubbish out of MD land complete all as specified and directed. (b) M & L for plastering 10mm thick in CM 1:3 using 100% coarse sand on roof surface including water proofing compound as per manufactures instructions and as directed by Engr-in-Charge. (c) Applying a coat of bituminous primerconforming to IS:3384-1986 @ 0.40 Ltrs/Sqm and allow to dry. (d) Applying and laying 3mm thick APP membrane having non oven polyester mat at core and covered with high quality polymeric asphalticprotected with thermo fusible HMHDPE film on both sideand over laps 10cm and 15cm longitudinal and trasverse directions respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and grove sealed with cement mortar 1:3. (e) Applying a tack coat of hot blown bitumen grade 85/25 primer @ 1.20 Kg/Sqm. (f)Binding with coarse sand dry @ 0.50 to 1 Kg/Sqm dust over bitumen primer. (g) Screeding bed 15mm thick in CM 1:4 as in beddding layers using 100% coarse sand. (h) M & L for Cement concrete tiles 25cm x 25cm x 22mm thick thick roof tiles, set, jointed and pointed in neat cement slurry as in terraces over screed bed compete all as specified & directed. |
| 8 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15cm thickness compete all as specified & directed. |
| 9 | M&LPCC 1:2:4 type B-1(using 20 mm graded crushed stone aggregates) as in roof padding etc compete all as specified & directed. |
| 10 | M&L for PCC1:2:4 type B-0(using 12.5 graded crushed stone aggregates), as in coping etc compete all as specified & directed. |
| 11 | Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc andM & L for rendering 15 mm thick on fair face of brick walls or concrete surface in CM 1:6 complete finished even and smooth without using extra cement compete all as specified & directed. |
| 12 | M&L for preparation of new surfacesand applying 2 coats of OBD over a coat of primer compete all as specified & directed. |
| 13 | Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc andM & L for rendering 15 mm thick on fair face of brick walls or concrete surface in CM 1:4 complete finished even and smooth without using extra cement compete all as specified & directed. |
| 14 | Supply only integral water proofing compound compete all as specified & directed. |
| 15 | M&L for preparation of new surface of wall including cornices and apply two coat of cement based paint etc compete all as specified & directed. |
| 16 | Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc and M&L rendering 10mm thick cement plaster 1:3 on ceiling surfaces and finishing even and smooth without using extra cement compete all as specified & directed. |
| 17 | M&L for preparation of New plastered surface of ceilingincluding cornices and apply two of white wash compete all as specified & directed. |
| 18 | Demolition of brick masonry built in cement mortar compete all as specified & directed. |
| 19 | M&L for brick work with sub class "B" bricks straight or curved on plan exc 6m mean radius built in CM 1:6 compete all as specified & directed. |
| 20 | Dismantling of AC (corrugated/semi corrugated) sheet/PGI/CGI in roof covering including ridges compete all as specified & directed. |
| 21 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and making good to disturb surface, compete all as specified & directed. |
| 22 | S&F old dismantled Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet any thickness and colour as in roof covering/cladding to wall, fixed with self tapping screws and making good to disturb surface, compete all as specified & directed. |
| 23 | S&F 6 to 8mm thick polycarbonate sheet of colour as approved by Engr-in-Charge in roof coverings incl ridges and fixed with necessary J/J hook, fasterners etc compete all as specified & directed. |
| 24 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ridge/valley gutter in wall/roof, fixed with self tapping screws compete all as specified & directed. |
| 25 | Repair of holes in galvalume sheets/AC sheets by filling with bitumen washer, metal putty, silicon gel, M-Seal and similar solutions/chemicals to avoid leakage through the roof sheets compete all as specified & directed. |
| 26 | Dismantling wrought iron or mild steel work of any description all compete all as specified & directed. |
| 27 | S&F Fe-410-0 or 310-0 joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) compete all as specified & directed. |
| 28 | M&L for preparation of new/old Steel surface of any description over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat red oxide primer etc compete all as specified & directed. |
| 29 | S&F in replacement Pillar taps,15mm bore CP with with capstan heads, long body screwed down, screwed for lron pipe high pressure with lettered "hot and Cold" with long shank compete all as specified & directed. |
| 30 | S&F in replacement Stop valves, 15mm bore cast copper alloy, fancy type CP screwed down high pressure screwed both ends for iron pipes or for unions compete all as specified & directed. |
| 31 | S&F in replacement chromium plated cast copper alloy bib taps 15 mm bore fancy type long body capstan head handles half turn compete all as specified & directed. |
| 32 | S&F replacement PVC valveless, syphonic action type, flushing cistern, low level, white colour capacity 10 liters with inlet and outlet, ball valve, handle including cast iron brackets & 32 mm bore PVC flush pipes & PVC connection pipe, compete all as specified & directed. |
| 33 | S&F inreplacement vitreous china WHB white colour of size 600X480 mm flat back or angle back type including angle iron bracket, waste coupling, PVC waste pipe 32 mm dia 60 cm long fixed pinning in ends of brackets, compete all as specified & directed. |
| 34 | S&F in replacement Vitreous china squatting pan, orissa pattern, size 580x440 mm white, with integral foot rests including connection to trap and to flushing pipe, anti syphonage pipe including making good to floor with PCC 1:2:4 or cement sand mortar 1:3 compete all as specified & directed. |
| 35 | S&F in replacement Vitreous china wash down water closet pan (pedestal pattern) white colour excluding fixing bolts, flushing cistern & flush pipe) but including seat cover,Jet spray white colour compete all as specified & directed. |
| 36 | S&F in replacement PVC connections 15mm size with PTMT nuts and bolts of length 600 mm etc compete all as specified & directed. |
| 37 | S&F in replacement PVC waste pipe 32/40mm dia610mm long suitable for WHBorSinksetc compete all as specified & directed. |
| 38 | Taking down eaves gutters, rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc including cleaning or refixing or removal to stores compete all as specified & directed. |
| 39 | S&F 110mm PVC SWR pipes single socketed in any length laid in trenches or in floor & walls with MS clamps etc compete all as specified & directed. |
| 40 | S&F 75mm PVC SWR pipes single socketed in any length laid in trenches or in floor & walls with MS clamps etc compete all as specified & directed. |
| 41 | S&F in replacement PVC (SWR) bends any radius 110mm dia compete all as specified & directed. |
| 42 | S&F in replacement PVC (SWR) single T equal or unequal 110mm dia compete all as specified & directed. |
| 43 | S&F in replacement PVC (SWR) bends any radius 75mm dia compete all as specified & directed. |
| 44 | Dismantling floor, hearth or wall tilling including cement mortar bedding(but not backing), and rubbish offpremises etc compete all as specified & directed. |
| 45 | M&L non-skid ceramic coloured tiles joint free ceramic tiles 7 to 8 mm thick 400x400mm tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed or bedding layer of cement mortar 1:6 for laying tiles compete all as specified & directed. |
| 46 | M&L non-skid ceramic coloured tiles joint free ceramic tiles 7 to 8 mm thick 400 x 400mm tile as in skirting/dado etc set and jointed in neat cement slurry and pointed in coloured cement to match 10mm thick backing coat of cement mortar 1:4 for laying tiles compete all as specified & directed. |
| 47 | M&L Glazed ceramic tiles in vertical surface 300 x 200 x7 mm / 350x 250x 7mm/ 450X 350X 7mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match and 10mm thick backing coat of cement mortar 1:4 for laying tiles compete all as specified & directed. |
| 48 | M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) with approved garins or shade by Engr in charge ,polished, area of each tiles of 600x600 mm size in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match compete all as specified & directed. |
| 49 | S&Fin replacement Rotational moulded polethelene water storage tanks in 500 litres capasity (cylinderical vertical & triple layer with closed top) hoisted and fixed in position compete all as specified & directed. |
| 50 | S&Fin replacement Rotational moulded polethelene water storage tanks in 1000 litres capasity (cylinderical vertical & triple layered with closed top) hoisted and fixed in position compete all as specified & directed. |
| 51 | Dismantling existing 500 Ltrs water tanks, setting aside, cleaning and removing all scale and dirt etc, from tanks and from mouths of circulating pipes etc and re-fixing in position compete all as specified & directed. |
| 52 | Dismantling existing 1000 Ltrs water tanks, setting aside, cleaning and removing all scale and dirt etc, from tanks and from mouths of circulating pipes etc and re-fixing in positioncompete all as specified & directed. |
| 53 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) any thickness, including cover fillets etc compete all as specified & directed. |
| 54 | S&F ceiling 4mm thick Non asbestos fibre cement building boards only and including two coat of white wash, compete all as specified & directed. |
| 55 | S&F gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions, compete all as specified & directed. (except grids) |
| 56 | M&L for preparation of ceiling surface and applying two coats of OBD over a coat of putty compete all as specified & directed. |
| 57 | S&F cement building board/designer E-Boardonly with all finishes size 595 x 595mm fixed in ceiling required compete all as specified & directed. |
| 58 | Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix "B" to Particular specifications as approved by AGE (I) AF manauri |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
