Military Engineer Services-MES has published Tender For Maintenance And Repairs/ Painting To Steel Furniture At Ge (I) Rnd Kanchanbagh, Hyderabad. Submission Date for this Tender is 19-04-2024. Painting Tenders in hyderabad Telangana. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Notes : (i) Day to Day complaints of furniture shall be addressed at site (i.e.,) at user place without any extra cost to department under GE(I) R&D Kanchanbagh. (ii)for major repairs items shall be issued to contractor, the same shall be taken to contractor workshop and shall be returned to user place where lifted at no extra cost ot department. (iii) After painting of lockers, furniture, etc shall be wraped with protection layer in order to avoid damages in transit and of any damage item shall be rejected. (iv) Transportation to and fro to work at user place is deemed included in quoted rate. |
2 | Almirah Large Steel :-FD-1031 :-Removing Dents, Bends and welding whereverrequired for Almirah Large Steel:- Scrapping old painted surfaces and removing existing paint on surfaces with chemical /aerosal spray.Preperation of almirah surfaces after applying putty and red oxide primer and spray painting of almirah with two coats of synthetic enamel paint . Colour :- Royal blue/OG colour and half white colours as directed by Engg-in-Charge . Make for paint:- Asian/Berger/Nerolac Note :-Almirah as a whole shall be measured as single unit. |
3 | Almirah Medium Steel :-FD-1032 :-Removing Dents, Bends and welding whereverrequired for Almirah Medium Steel:- Scrapping old painted surfaces and removing existing paint on surfaces with chemical /aerosal spray.Preperation of almirah surfaces after applying putty and red oxide primer and spray painting of almirah with two coats of synthetic enamel paint .Colour :- Royal blue/OG colour and half white colours as directed by Engg-in-Charge. Make for paint:- Asian/Berger/Nerolac Note :-Almirah as a whole shall be measured as single unit. |
4 | Removing the unserviceable locks fromAlmirah andS&F new steel locks (6 lever brass) for Almirah large/Med steel of approved quality with duplicate keys all as directed by Engg-in-charge Make :-Godrej/Sheel/Harrison |
5 | Dismantling of unserviceable 3 way locking device (Handle Mechanism) and supplying and fixing new lock devices (Handle mechanisim) complete all as directed . Make: Sheel/Godrej/Steelcase |
6 | All As per Item No 1.03 above but Almirah Medium Steel .Complete all as directed by Engg-in-Charge |
7 | Removing and replacing unserviceable handle with new 100 mm chromium platedhandle of approved quality for Almirah large/Med steelall as directed by Engr-in-charge. Make : Godrej/Sheel |
8 | Removing the existing U/S damaged shelf from almirah largesteel and S & F shelf made out ofMS sheet, 1 mm thick, bent to shape as required, welding, etcincluding preparing the new steel and iron surfaces and applying, twocoats of Synthetic enamel paint as specified in Sl No 01 ,over a coatof red oxide primercomplete all as directed By Engg-in-charge Note:- Each shelf will be measured as one unit. Make for sheet :- Rinl /Sail / Tisco. Make for paint:- Asian/Berger/Nerolac |
9 | All As per Item No 1.06 above but Almirah Medium Steel .Complete all as directed by Engg-in-Charge |
10 | Dismantling the unserviceable rusted front shutter leaves of left portion of almirah & supply and fix new shutter leaves of size 1980mmx460mm made out of 1mm thick MS sheet duly preparing the surfaces complete all as directed. Note: Cost of welding of joints shall be deemed to be included in the quoted rate. |
11 | All As per Item No 1.08 above but Almirah Medium Steel .Complete all as directed by Engg-in-Charge |
12 | Dismantling the unserviceable rusted front shutter leaves of right portion of almirah & supply and fix new shutter leaves of size 1980mmx460mm made out of 1mm thick MS sheet duly preparing the surfaces complete all as directed. Note: Cost of welding of joints shall be deemed to be included in the quoted rate. |
13 | All as per Item No 1.10 above but Almirah Medium Steel .Complete all as directed by Engg-in-Charge |
14 | Dismantling the unserviceablerusted back portion of almirah large and supply and fixing new back portion of size 920mmx1985mm made out of 1mm thick MS sheet as per shape and size of almirah Large steel complete all as directed. Note: Cost of welding of joints shall be deemed to be included in the quoted rate. |
15 | All as per Item No 1.12 above but Almirah Medium Steel .Complete all as directed by Engg-in-Charge |
16 | Dismantling of unserviceable leg supporters of almirah large and fixing new leg supporters as per size, shape complete all as directed. Note: Cost of welding of joints shall be deemed to be included in the quoted rate. |
17 | All as per Item No 1.14 above but Almirah Medium Steel .Complete all as directed by Engg-in-Charge |
18 | Dismantling of unserviceable hinges of almirah large and supply and fixing new hinges with screws , weldingwherever required etc complete all as directed. Note: Cost of welding of joints shall be deemed to be included in the quoted rate. |
19 | All as per Item No 1.16 above but Almirah Medium Steel .Complete all as directed by Engg-in-Charge |
20 | Dismantling of unserviceable shelf supporter (Clip) and supply and fixing new shelf supporters duly painted complete all as directed. |
21 | All As per Item No 1.16 above but Almirah Medium Steel .Complete all as directed by Engg-in-Charge |
22 | Dismantling of damaged/rusted top of almirah large and supply & fixing new top portion made out of 1mm thick MS sheet complete all as directed. Note: Cost of welding of joints shall be deemed to be included in the quoted rate. |
23 | All As per Item No 1.20 above but Almirah Medium Steel .Complete all as directed by Engg-in-Charge |
24 | Dismantling of damaged/rusted bottom shelfof almirah large and supply & fixing new bottom portion made out of 1mm thick Ms sheet complete all as directed. Note: cost of welding of joints shall be deemed to be included in the quoted rate. |
25 | All As per Item No 1.22 above but Almirah Medium Steel .Complete all as directed by Engg-in-Charge |
26 | CHAIR CBA STEEL:FD-75 Removing old unserviceable seat ( Bottom) andsupply and fixingof new seat of existing size duly woven with 2mm wide and 0.4mm thick plastic cane in Godrej pattern (Superior quality).The wood surface shall be painted with high gloss paint, black in tint complete all as directed and as per drawing. |
27 | Removing old unserviceable backandsupply and fixingof new back seat of existing size duly woven with 2mm wide and 0.4mm thick plastic cane in Godrej pattern (Superior quality). The wood surface shall be painted with high gloss paint, black in tint complete all as directed and as per drawing. |
28 | Removing old arm rest and S&Fnew armrest made out of 1st class teak wood and shall be painted with high gloss paintblack in tint all as per drawing and as directed |
29 | M&L preparation of old steel surface of chair by scrapping old paint & applying two coats of synthetic enamel paint over a coat of red oxide / Zinc chrome primer complete all as directed. |
30 | Removing worn out bottom and top bushes from chair CBA and supply and fixing new bushes for top and bottom complete all as directed |
31 | CHAIR CBB STEEL: FD-75 Removing old unserviceable seat ( Bottom) andsupply and fixingof new seat of existing size duly woven with 2mm wide and 0.4mm thick plastic cane in Godrej pattern (Superior quality). The wood surface shall be painted with high gloss paint, black in tint complete all as directed and as per drawing. |
32 | Removing old unserviceable backandsupply and fixingof new back seat of existing size duly woven with 2mm wide and 0.4mm thick plastic cane in Godrej pattern (Superior quality). The wood surface shall be painted with high gloss paint, black in tint complete all as directed and as per drawing. |
33 | M&L prepration of old steel surface of chair by scrapping old paint & applying two coats of synthetic enamel paint over a coat of red oxide/ Zinc chrome primer complete all as directed. |
34 | Removing worn out bottom and top bushes from chair CBB and supply and fixing new bushes for top and bottom complete all as directed |
35 | Book Case Steel:- FD-1028 Repairs and removing ofdents and bents of Book case steel including repair ofsliding arrangements for book caseand scrapping old painted surfaces and removing existing paint on surfaces with chemical /aerosal spray.Preperation of surfaces after applying putty at undulations and red oxide primer and spray painting of book case steelwith two coats of synthetic enamel paint. colour :- Half white colour or approved by GE. Make for paint:- Asian/Berger/Nerolac Note:- Each book case shall be measured as one unit. |
36 | Removingthe unserviceable shelf locks and S&F new steel lock (6 lever brass) of approved quality with duplicate keys complete all as directed by Engg-in-Charge Make : Godrej/Sheel/Harrison |
37 | Removing and replacing the broken glass with 3mm thick new plain glass and packing wherever required to make the item intact and to avoid loose fittings .Make of Glass:- Modiguard/saintgobain/pilkington . Note:-Each Glass shall be measured as a single unit |
38 | FILING CABINET STEEL 4 DRAWERS Removing of dents, bends and preparing the old steel surface and applying two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer complete all as directed. |
39 | Greasing and oiling of rolling channels and necessary accessories requiredfor smooth functioning of drawers of filing cabinet |
40 | Removing of U/S drawers of filing cabinet and S&F new drawers made out of 1mm thick MS sheet made it shape and size and all as directed |
41 | Removing of u/s rolling channels and S&F new suitable rolling channels including oiling complete all as directed |
42 | Dismantling unserviceable locks and supplying and fixing new Lockswith duplicate keys complete all as directed. Make: Sheel/Godrej/Steelcase |
43 | LOCKER BED SIDE STEEL Removing of dents, bends and preparing the old steel surface and applying two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer complete all as directed. |
44 | Dismantling of damaged/rusted bottom base of Locker and supply & fixing new bottom portion made out of 1mm thick MS sheet complete allas directed. Note: Cost of welding of joints shall be deemed to be included in the quoted rate. |
45 | DRAWING CABINET STEEL (MAP) Dismantling of unserviceable locks and supplying and fixing new Lockswith duplicate keys complete all as directed. Make: Sheel/ Godrej/Steelcase |
46 | M&L for preparation and matching duplicate keys (SS) for tables complete all as directed. Make: Sheel/Godrej/Steelcase |
47 | COMPACTOR Dismantling unserviceable locks and supplying and fixing new Lockswith duplicate keys complete all as directed. Make: Sheel/Godrej/Steelcase |
48 | Scrapping old painted surfaces and removing existing paint on surfaces with chemical /aerosal spray.Preperation ofsurfaces after applying putty and red oxide primer and spray paintingwith two coats of synthetic enamel paint .Colour :- As approved by GE and as directed by Engg-in-Charge Make for paint:- Asian/Berger/Nerolac |
49 | Rack steel 330x229x381mm |
50 | Rack steel 300x300x600mm |
51 | Rack side steel 685x225x760mm |
52 | Rack steel 1900x400x200mm |
53 | Rack steel 6 shelves size 1905x914x457MM |
54 | Rack steel 7 shelves size 2175x900x500mm |
55 | Rack steel 2210x914x381mm |
56 | Rack steel 8 shelves size 2475x900x500mm |
57 | Rack steel 7 shelves size 3210x914x457mm |
58 | Bin stack 334x210mm |
59 | Repairs to Table Office Officer/Clerk Steel:-FD-1003/1004/TP Removing the UNSV drawer from table and supply and fix new drawer made out of 1mm thick MS sheet made to shape, welding etc,including preparing the new steel and iron surfaces and applying, two coats of smoke grey synthetic enamel paint, first quality,over a coatof red oxide primerall as per drg and as directed by Engr-in-Charge.Note:- Each drawer will be measured as one unit. Make for sheet :-Sail /Rinl/Tisco Make for Paint/Asian/berger/Nerolac |
60 | Removing the unserviceable locks and S&F new steel lock (6 lever brass) of approved quality with duplicate keys all as directed by Engr-in-charge for table office officer/table office clerk steel. Make : Godrej /Sheel/Harrison |
61 | Removing the existing unsv table tops oftable office clerk steel andS&F new table top with 18mm thick pre-laminatedparticle board, with one face decorative laminate and other balancing white, exterior grade,ISI Marked,duly fixed with 20 /19mmx 4mm thick teak wood, half round beading, duly polished, glossy finish,all round, etc complete, all as directedall as directed. Make : Eco Bd /Bhutan Bd/Novapan/Anchor |
62 | All as per item No 10.02 above but for Table office officer steel |
63 | Removing of unserviceable PVC shoes of table S&F new PVC shoes of table as directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail