Archaeological Survey Of India -ASI has published Tender For Provision Of Approach Pathway And Upgradation Of Existing Boundary Wall Of Buriya-Ka-Tal, Agra. Submission Date for this Tender is 18-04-2024. Footpath Work Tenders in Agra Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (Rate including G.S.T.) |
| 2 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil. (Rate including G.S.T.) |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) 15% bricks would be used from bricks received through item no. 43 through demolishing of brick mortar. (Rate including G.S.T.) |
| 4 | Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 1:6 (1cement : 6 coarse sand) (Rate including G.S.T.) |
| 5 | Providing & fixing M.S. gates of required pattern with angle iron frames (50x50x6) mm size graded with 10 cm c/c Sq. bars 12mm size pointed at the top extra with same curved bar and each frame having Gusset plate 6mm thick at corners & center and provision for hinges and locking arrangement with M.S. iron gurders of required size and nut bolts including cutting fabricating welding etc. complete. (Rate including G.S.T.) |
| 6 | Providing and laying in position cement concrete 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) of specified grade excluding the cost of centering and shuttering. as per direction of Engineering-charge. (Rate including G.S.T.) |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases of columns, etc. for mass concrete. as per direction of Engineer-in-charge.(Rate including G.S.T.) |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platform. As per direction of Engineer-in-charge. (Rate including G.S.T.) |
| 9 | Providing and laying Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse and(zone-III) : 3 graded stone aggregate 20 mm nominal size) of specified grade excluding the cost of centering and shuttering. as per direction of Engineer - in- charge. (Rate including G.S.T.) |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Mild steel and Medium Tensile steel bars. (Rate including G.S.T.) |
| 11 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in Cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes and sizes. (Rate including G.S.T.) |
| 12 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. (Rate including G.S.T.) |
| 13 | 40 mm thick Red Sand stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. (Rate including G.S.T.) |
| 14 | 12 mm cement plaster on wall of mix: 1:4 (1 cement: 4 fine sand). (Rate including G.S.T.) |
| 15 | 6 mm cement plaster on ceilling of mix : 1:3 (1 cement : 3 fine sand). (Rate including G.S.T.) |
| 16 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. (Rate including G.S.T.) |
| 17 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/ litre, of approved manufacturer, of required shade and colour complete, as per manufacturer"s specification. (Rate including G.S.T.) |
| 18 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) (Rate including G.S.T.) |
| 19 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood. (Rate including G.S.T.) |
| 20 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws complete. as per direction of Engineer-in-charge. (Rate including G.S.T.) |
| 21 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 35 MM thick.(Rate including G.S.T.) |
| 22 | Providing and fixing M.S. grills of required pattern in frames of windows & Ventilator etc. with M.S. Angle 40x40x6 mm for Frame & 12 mm Square Bar c/c distance 10 cm etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. (Rate including G.S.T.) |
| 23 | 25 mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : (Rate including G.S.T.) |
| 24 | Providing and laying Vitrified wall tiles size of 500 x 500 mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). as per direction of Engineer-in-charge. (Rate including G.S.T.) |
| 25 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming toIS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C.pan of size 580x440 mm with integral type foot rests etc. (Rate including G.S.T.) |
| 26 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. (Rate including G.S.T.) |
| 27 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. (Rate including G.S.T.) |
| 28 | concealed electric fitting in toilet block and Staff Room Total area 27 Sqm having 25 point 6Amp, 4 point 15Amp with switch and required socket use 1.00 Sqm, 1.50 Sqm copper wire for 6.00 Amp point and 4 Sqm wire for 15 Amp point including make circuit with MCB 10 to 32 Amp icluding box, and 9 Nos. conceded Light, complete with sheet etc. (Rate including G.S.T.) |
| 29 | LED Light complete 50 watt with Piller for LED light 2" dia 2.5mtr. Long (Havells or Equivalent). (Rate including G.S.T.) |
| 30 | Armouredcable (25MM 3Core Aluminium) (Rate including G.S.T.) |
| 31 | 18" Ceiling fan full size (Havells or Equivalent). (Rate including G.S.T.) |
| 32 | Exhaust fan (Havells or Equivalent). (Rate including G.S.T.) |
| 33 | Providing & Fixing Sanitary fitting for Male & Female Toilet block including sanitary articles and labour charges etc. as per required complete in all respect. (Rate including G.S.T.) Item No.-1:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 1- 25 mm nominal dia Pipes.(Rate including G.S.T.) |
| 34 | 15 mm nominal dia Pipes (CPVC). (Rate including G.S.T.) |
| 35 | 100 mm nominal dia Pipes(CPVC).. (Rate including G.S.T.) |
| 36 | 80 mm nominal dia Pipes(CPVC). (Rate including G.S.T.) |
| 37 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including Ball Valve.(Rate including G.S.T.) |
| 38 | P/F Direction notice board etc. complete of size 3"x5/2" of retroreflective. (Rate including G.S.T.) |
| 39 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (Rate including G.S.T.) |
| 40 | Providing and fixing mirror of superior glass (of approved quality) for Male and Female Toilet block and of required shape and size Rectangular shape 453x357 mm with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : (Rate including G.S.T.) |
| 41 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. (Rate including G.S.T.) |
| 42 | Arrangement of 150 mm dia and 200’ deep boring for 2.00 H.P. Submersible pump crompton greaves brand and provide 125 mm dia P.V.C. pipe 6 Kg / cm2 and 32 mm dia colomn pipe (ISI mark) heavy class, Cable- 250’ long and 200’ long 12mm dia plastic rope complete with starter and Gate valve 32 mm dia CPVC. (Rate including G.S.T.) |
| 43 | Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (Rate including G.S.T.) |
| 44 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. (Rate including G.S.T.) |
| 45 | Provision for Ist class Honey comb Brick Masonry with cement mortar 1:6 (1 cement :6 coarse sand ) including all supply of material, labourers ,T.P. etc required for completion of work. (Rate including G.S.T.) |
| 46 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (Rate including G.S.T.) |
| 47 | Random Rubble masonry with hard stone in foundation and plinth and above plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with.(Rate including G.S.T.) |
| 48 | Providing & Laying 20 mm thick cement plaster on the wall (Cooping) with 1:4 (1 cement: 4 fine sand)including pigment. (Rate including G.S.T.) |
| 49 | Providing and fixing marble stone slab for urinal partition including rubbed, edges rounded and polished, cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. (Rate including G.S.T.) |
| 50 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : RRange of Single half stall urinals with 5 litre P.V.C. automatic flushing cistern. (Rate including G.S.T.) |
| 51 | Providing and fixing 40 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (Rate including G.S.T.) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
