Public Works Department-PWD has published Tender For Replacement/Installation Of Electrical Wiring, Equipment And Accessories Including Ro And Water Cooler At Sbv-, Pataudi House, New Delhi. Submission Date for this Tender is 03-04-2024. Electrification Work Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required. a) Group C |
| 2 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. |
| 3 | Supplying and drawing of following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit etc as required. a) 3 x 1.5 sq. Mm |
| 4 | b) 6 x 1.5 sq. Mm |
| 5 | c) 3 x 4 sq. Mm |
| 6 | d) 6 x 4 sq. Mm |
| 7 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit etc as required a) 25 mm |
| 8 | Supplying and fixing of PVC cable management system / wall trunking with cover of following sizes including internal, external, flat single cover and T- cover , end cap and other accessories on the wall so as to make complete etc as required. a) 105 mmx50mm |
| 9 | b) 80mmx80mm |
| 10 | Supplying and fixing of following size/ modules, GI box alongwith modular base &cover plate for modular switches in recess etc as required. a) 6 Module (150 mmX75 mm |
| 11 | b) 8 Module (125 mmX125 mm) |
| 12 | c) 12 Module (200 mmX150 mm) |
| 13 | Supplying and fixing of 3 pin, 5 Ampers ceiling rose on the existing junction box/wooden block including connections etc as required |
| 14 | Supplying and fixing of call bell/ buzzer suitable for single phase, 230 Volts, complete etc as required |
| 15 | Supplying and fixing of following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etcas required. a) 15/16 Ampers switch |
| 16 | b) 15/16 Ampers switch |
| 17 | c) 5/6 Ampers switch |
| 18 | d) 3 pin 5/6 Ampers socket outlet |
| 19 | e) Bell push |
| 20 | Supplying and fixing of modular blanking plate on the existing modular plate & switch box excluding modular plate etc as required |
| 21 | Supplying and fixing of suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 Ampers& 15/16 Ampers modular socket outlet and 15/16 Ampers modular switch, connections etc as required. |
| 22 | Supplying, installation, testing & commissioning of 400mm sweep size Oscillating type wall fan of with fan regulator and fixing with the help of dash fasteners including connections etc as required. |
| 23 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required a) 8 way TP DB, Double door |
| 24 | Supplying and fixing of 5 Ampers to 32 Ampers rating, 240/415 Volts, 10 kA, breaking capacity “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required a) Single pole |
| 25 | Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required. a) For 8 way, Double door TPN MCBDB |
| 26 | Supplying, laying and fixing of following sizes XLPE insulated PVC sheathed aluminum conductor armoured cable of 1.1 KV grade on surface etc complete as required. a) 4 X 25 Sq.mm |
| 27 | b) 3.5 X 35 Sq.mm |
| 28 | c) 3 X 10 Sq.mm |
| 29 | Supply, installation, testing & commissioning of following capacity energy saving IP-66 LED flood light fitting of rating 150 watt madeout of aluminum housing with lumen efficiacy 125 lumen per watt, CRI 70%, with potted driver of surge 4KV internal and 10KV external, THD less than 10%, with lense, minimum burning hours of 50,000 Hours, with LM-70/79/80 reports, fixed on angle iron frame suitable to work 230 volt AC supply complete with connection etc. with 1.5 sq.mm PVC insulated copper conductor wire as required at site. |
| 30 | Supplying Installation Testing & Commissioning of 34-36 Watt of Recess/surface mounted LED luminaries made in CRCA sheet metal with wider light window and opal polysterene diffuser for spotless and glare-free uniform lighting for offices and modern workspace areas. High energy efficiency resulting in faster return on investment. Larger light emitting surface for clutter free work spaces. High transmittance opal polystyrene diffuser for spot-free lighting. Slim profile with thickness <35mm and presence of secondary optics lens on the individual LED make the luminaries having UGR<19.Operating Voltage Range: 140 - 280V PF: >0.95THD: <10% CCT: 6500KCRI: 80+ IP: 20LED Make: Seoul / Bridgelux / Osram / Cree / Edison / Lumileds LED Burning hours: 50000hrs @L70 Operating temperature: -10 to +50°C Surge protection: >4kVSystem Lumen Output: >3600lm Electrical Protection: Over voltage, Short circuit, Open circuit including connection with 1.5 sq. mm. PVC insulated copper conductor FRLS cable with the help of Clutch wire and sleeve etc. including making connections, testing, commissioning etccomplete as required. |
| 31 | Supplying, installation, testing & commissioning of energy efficient 1200 mm sweep size ceiling fan, including wiring the down rod of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable including providing and fixing phenolic laminated sheet cover on fan box etc. as required. |
| 32 | Supplying, installation, testing & commissioning of 6000K (1200 mm) energy efficient LED wall mounted light luminaries, extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver, suitable to work on 230 volts, AC supply complete with connection etc. with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required at site The luminaries shall be submitted with LM-80 report with a life of 50000 Hours @ L-70 and LED photo biological safety report conforming to IEC 62471 & LED source manufacturer and LM-79 report from NABL accredited Lab. The LED chip should be of Cree, Nichia, Philips Lumiled, Osram. |
| 33 | Supplying, Installation, testing and commissioning of exhaust fan of 300 mm sweep size, 900 rpm speed with shutter & louvers in the existing opening including making good the damages, connection, testing & commissioning etc. as required. |
| 34 | Supplying, installation, testing &commissioning of stains steel panel pedestal type with G.I. cabinet storage type Water Cooler 150/150 Ltr. Capacity, fully Stainless Steel suitable for operation on 230V + 10% 50 Hz single phase AC supply includingmaking water line & electrical connection etc. as reqd. |
| 35 | Supplying, Installation, Testing and commissioning of Water Purifier R.O. system designed to deliver minimum 50 liters of purified water per hour through a minimum 5 stage purification process. Its membrane should have a pore size of 0.0001 micron size which prevents the passage the of micro organisms and total dissolved salts making the water lighter, taste natural and safe to drink with automated Switching off device including suitable stand made out of angle iron of 25 x 25 x 5 mm including painting complete etc. as required. |
| 36 | Supply, Installation, Testing and Commissioning Of 30W Wall Mount Speaker, Selectable 8 OHM, 70 V and 100 V inputs, maximum Power 45 W, rated power 30 W, effective Frequency range 10 db,127MM woofer 13MM dome tweeter |
| 37 | Supply, Installation, Testing and Commissioning Of 240W mixer amplifier With USB, BT, AUX Connectivity, 4 Microphone Line Input. Frequency Response 60Hz TO 20 KHz, dynamic range 93 dB, ON OFF Switch, Master Volume KNOB, Safety acc. To EN 60065 |
| 38 | Supply, Installation, Testing and Commissioning of 240W power Amplifier IN A 2U High Housing. Dual Inputs With Priority Switching, Voltage 24 VDC, Output Power 240/360W, 3PIN XLR, Direct Output 100V, 70V, 8 oHM |
| 39 | Supply, Installation, Testing and Commissioning of Unidirectional Condenser Microphone, Flexible Stem, ON/OFF Sliding Switch WITH Priority Contact, Voltage Range 12 TO 48 V, Maximum Input Sound Level 110db SPL, Frequency Range 100 Hz to 16 khz, 5PIN DIN Connector |
| 40 | Supply, Installation, Testing and Commissioning of wireless Microphone handheld Type, 14 Hour Battery Life, UHF Wireless System, LCD Display, Frequency A Band 618-634MHZ, Dynamic Range 95db |
| 41 | Supply, Installation, Testing and Commissioning of Equipment Rack 12 U floor mounted complete etc as required for Amplifier and Other Accessories |
| 42 | Supply and Laying of 2 Core 1.5 sqmm Speaker Cable Armoured, Accurate Sound transmission, Maximum Mechanical Strength, Installation of Microphone Signals in Auditorium, Schools Shopping Malls etc. |
| 43 | Providing and fixing following rating and breaking capacity and pole MCCB in existing TPN DB including, making connections, etc. as required. a) 100 Amp, 16 KA,TPMCCB with thermal magnetic release(ICU= 100% ICS) |
| 44 | Fabricating, supplying, installation, testing & commissioning of electronic LED sign board in multi languages, as per requirement suitable for working on 220 volts, Single phase, AC supply with the frame made out of 50mm x 25mm SS square pipe section with stifferners at regular intervals, back panel of GI sheet and front Fascia of 3mm thickness aluminum composite panel to cladded on frame letters shall be ACRYLIC of suitable size, as per requirement of height of board with 16 watt Speakers, suitable for operation on 230 Volts 50 Hz AC supply with heavy duty fixed MS stand on wall complete with all connection complete etc. as reqd. |
| 45 | Supply, Installation, Testing and Commissioning of factory build load bank of G frame, 4 way 250 Amp Double Door Incomer capacity etc. as required.a) 250 Amp. 35 KA TP MCCB - 1 No.b) Pre-wired meter module for G Frame Panel Boards with Voltmeter, Ammeter, Selector switch, CTs, Control Fuse & Indicating lights.c) Meter Module - Digital 1 No.d) Cable Alley A frame panel boards I/C 250 Amp A, O/G 3P GF 2/4 way frame.Outgoing d) 125 Amp 16KA TP MCCBs - 6 Nos. with thermal magnetic release. |
| 46 | Less Credit for following items i) assorted luminaries |
| 47 | ii) Wire PVC Insulated Assorted |
| 48 | iii) Assorted ceiling fans/Exhaust Fans |
| 49 | iv) Assorted TPNDB with SPMCB |
| 50 | v) assorted Steel Conduit/channels |
| 51 | vi) Water cooler |
| 52 | vii) Cubical Panel |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
