}

Tender For Annual Repair And Maintenance Of Works At Fsd Mancherial For The Year 2023-24. S.H. Pre Monsoon Repairs, mancherial-Telangana

Food Corporation Of India-FCI has published Tender For Annual Repair And Maintenance Of Works At Fsd Mancherial For The Year 2023-24. S.H. Pre Monsoon Repairs. Submission Date for this Tender is 08-04-2024. Civil Work Tenders in mancherial Telangana. Bidders can get complete Tender details and download the document.




Tender Notice

43065674
Tender For Annual Repair And Maintenance Of Works At Fsd Mancherial For The Year 2023-24. S.H. Pre Monsoon Repairs
Open Tender
Indian
Telangana
mancherial
08-04-2024

Tender Details

Tender For Annual Repair And Maintenance Of Works At Fsd Mancherial For The Year 2023-24. S.H. Pre Monsoon Repairs

Key Value

Document Fees
Refer document
EMD
INR 45800.0 /-
Tender Value
INR 22.86 Lakhs /-

BOQ Items

Name of Work: ARMO worksat FSD Mancherial for the year 2023-24,2024-25. S.H: Premonsoon repairs
Sl. No. Item Description
1Supply of silicone sealant overSelf drilling / Self tapping Screws of make Dr. Fixit ( 1 Cartridge = 280 ml)
2Labour charge for applying weather silicon sealant overSelf drilling / Self tapping Screws including providing safety measures for the labourers to work at higher elevation viz., ropes etc., insurance coverage for labourers and hiring of required T&P etc complete.
3Supply of Super flash strip ( 100 mm size) of make STP ltd
4Laying Super Flash Strip over roofs including preparation of surface and providing necessary safety measures for the labourers to work at higher elevation, ropes etc., insurance coverage for labourers and hiring of requiring T&P etc complete but excluding grading.
5Cleaning of Storm water drains in all depths and width 0.60m to 1.00m including removal of debris/ rubbish and disposal of the same in all leads and lifts filling in low lying areas and levelling complete in the depot premises as directed by the Engineer-in-charge.
6Cleaning ofService drains around godownsin all depths and width 0.30mincluding removal of debris/ rubbish and disposal of the same in all leads and lifts filling in low lying areas and levelling complete in the depot premises as directed by the Engineer-in-charge
7Servicing to the rolling shutters including cleaning the side guides , springs and shaft etc., with kerosene oil, providingand applying fresh grease, applying tension to the springs replacing damaged parts and welding locking plates stoppers etc., wherever necessary etc complete as directed by the Engineer -in- Charge(Rolling shutters parts, laths, springs etc. will be supplied at free of cost)
8Providing and fixing rolling shutter springs of 27.5 cm long wire spring grade no.2 for rolling shutters including labour charges etc. complete as directed by Engineer-in-charge.
9Providing and fixingball bearing for rolling shutters
10Disposal of building rubbish/malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading,transporting, unloading to approved municipal dumping ground or as approved by Engineer-uin-charge, beyond 50m initial lead, for all leads including all lifts involved.
11Renewing glass panes with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4mm (weight not less than 10kg/sqm)
12Cleaning of terrace water storage tank (inside surface area) up to 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt,rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposal of malba all complete as per direction of Engineer-in-charge.(The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account.
13Cleaning of under ground sump, Over head R.C.C.Tank(independent staging) including disposal of silt and rubbish, all as per direction of Engineer-in-charge. The cleaning shall consisit following operations:-
14Demolishing cement concrete manually/by mechanical means including disposal of material within 50metres lead as per direction of Engineer-in-charge. Nominal concrete 1:3:6 or richer mix(i/c equivalent design mix)
15Supplying and filling in plinth with sand under floors, inculding watering, ramming,consolidating and dressing complete.
16Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level: 1:4:8 (1 cement: 4 coarse sand (Zone III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources.)(4.1.8)
17Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete : 50 mm thick with 20 mm nominal size stone aggregate
18Providing and fixing glass strips in joints of terrazzo/ cement concrete floors. 50 mm wide and 4 mm thick.
19Providing and laying debonding layer of 125 micron thickness at the interface of cement concrete slab and PCC as per Engineer- In charge
20Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.External work 50 mm nominal outer dia Pipes
21Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal outer dia Pipes
22Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
23Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round CPVC pipes including bed concrete as per standard design : 50 mm dia cpvc pipe
24Providing and laying autoclaved aerated cement blocks masonry with 100 mm/125 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum confirming to IS:2185(Part-3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
2512 mm cement plaster of mix : 1:4 ( 1 cement : 4 fine sand)
2615 mm cement plaster on rough side of single or half wall brick of mix : 1:4 ( 1 cement : 4 fine sand)
27Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail