Military Engineer Services-MES has published Tender For Repairs To Plastering, Roofing, Joinery, Plinth Protection, Painting, Repair / Replacement Of Sanitary Fittings, Internal Water Supply Fittings And Fixtures To Bldgs And Day To Day Maintenance At Karcham And Poari In The Area Of Age B / R-. Submission Date for this Tender is 26-04-2024. Shed Construction Tenders in karcham Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 17-Apr-2024 | Tender Date Postpone | Date | 19-04-2024 |
| 2 | 19-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-04-2024 |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 2 | M & L for rendering 12mm thick in CM (1:6) on brick work or concrete surfaces finishing even and smooth without using extra cement complete all as specified and directed. |
| 3 | M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 ,and finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | M & L for rendering 15mm thick in cement plaster 1:4on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finishing even and smooth without using extra cement complete all as specified and directed. |
| 5 | M & L for preparation of surfaces of new plaster surface of wall and applying two coats of oil emulsion distemper over a coat of chalk whiting , on plastered surfaces, preparatory to distempering complete all as specified and directed. |
| 6 | M & L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed. |
| 7 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coveringscomplete all as specified and directed. |
| 8 | S&F0.63 mm thickgalvanised corrugatedmild steel sheeting with two corrugation side lapfixed with coach screws and washers, in roof ,walls etc with grade of zinc coating 275. complete all as specified and as directed. |
| 9 | All as persrl item no 8 above but except sheet |
| 10 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 11 | All as persrl item no 10 above but except sheet |
| 12 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and as directed. |
| 13 | Dismantling Unframed timber scantlings 40 Sq. cm and over in section and in any position complete all as specified. |
| 14 | M&L 2nd class hard wood in scantling timber framed work fixed clean sawn directed completeall as specified and directed by Engr-in-charge. |
| 15 | M & L 6 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work inceiling etc complete all as specified and as directed. |
| 16 | S & F Second class hard wood plain fillets, wrought, square, rectangular or triangular in section, secured with screws, cross sectional area exceeding 3 and not exceeding 6 Sq. cm |
| 17 | S&F hangers 6mm dia G.I. (upto 1200mm length ) adjusting level, size of grid 605mm X605mm, fixed to roof slabs mean of ceilling cleats made out of GI flat 40X3mm size 60 mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. |
| 18 | S&F anodised aluminium snap grid frame work for suspended false ceiling ,size of grid 605mm X605mm complete all as specified. |
| 19 | S&F Non asbestos fiber cement building board 6mm thick ,fixed to aluminium or MS galvanised snap grid frame work with screw in ceiling complete all as specified. |
| 20 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 21 | M &L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5mm gradedstone aggregate) as in sub base in floors complete all as specified and directed by Engr-in-charge |
| 22 | M&Lscreed bed or bedding layer of morter 15 mm thick cement plaster 1:4 for laying floor finished to receive floor tiles/granite complete all as specified and as directed. |
| 23 | M & L for Virified Ceramic tilesLight shed 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 24 | S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but notexceeding 0.11 sqm, in floors etc, setand jointed in neat cement slurry and pointed in white or Coloured cement to match shade of the tiles. Tiles shall be conferming to IS - 15622, 2006, Gp-B II with average water absorption between 3% to 6% length, width and straitness of sides +10% (Max daviation). Thickness +5% (Max daviation). Centre & Edge curvature warpage +.5% (Max daviation). Breaking strength 1000N (Minimum) and minimum 95% tiles shall be free from visible defect. Notes : Shade of the tile including colour, design and pattern shall be approved by GE. |
| 25 | Dismantling of stone slab and tiles of any description or thikness in floors ,apron etc complete all as specified and as directed. |
| 26 | M&L for 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm gradedstone aggregate) in sub base of flooring/ hard standing complete all as specified and as directed. |
| 27 | M & L for 50mm thick PCC 1:4:8 type D-2, using 20mm graded stone aggregate as in surface of flooring finishing surface even and smooth without using extra cement all as specified and directed. |
| 28 | M&L for screed bed or bedding layer of morter 20 mm thick cement plaster 1:4 for laying floor finished to receive floor tiles/granite complete all as specified and as directed. |
| 29 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 30 | M&L for chequered cement concrete tiles 20 cm by 20 cm by 25 mm thick, with grey cement andpigments, set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed. |
| 31 | M & L machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed. |
| 32 | M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as ditrected. |
| 33 | Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed. |
| 34 | M&L for granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jombs, pillars, window-cill, cooking plateform and like in cement mortar (1:4) and with white cement (1:2) using pointing marble dust with admixture of pigment to match, including moulding of granite complete all as specified and as directed. |
| 35 | M &L for Circular cutting or notching and waste of any thickness and size of tiles, granite and Marble complete all as specified and directed |
| 36 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 37 | M/L rendering 10mm thick in cement plaster 1:3 on stone masonry surfaces or surfaces other than fair face of brick work to receive glazed tiles/granite complete all as specified and as directed. |
| 38 | M&Lcoloured Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 350 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles. Tiles shall be conferming to IS - 15622, 2006, Gp-B II with average water absorption between 3% to 6% length, width and straitness of sides +10% (Max daviation). Thickness +5% (Max daviation). Centre & Edge curvature warpage +.5% (Max daviation). Breaking strength 1000N (Minimum) and minimum 95% tiles shall be free from visible defect. Notes : Shade of the tile including colour, design and pattern shall be approved by GE. |
| 39 | M&L for Cement concrete 1:3:6type C-1 (using 20 mm gradedstone aggregate)75 mm thick as in plinth protections, surface finished even and smooth w/o using extra cement including 3 mm thick glass dividing strip of figured glass , pin headed type, 73 mm wide inserted in position complete all as specified and as directed. |
| 40 | Taking down door chowkhat with shutter area n-exc 1.5 Sqmeach(without taking off shutters from the frame) complete all as specified & directed. |
| 41 | Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) complete all as specified & directed. |
| 42 | Taking down shutters of any description n. exc 1 sqm each complete all as specified & directed. |
| 43 | Taking down shutters of any description areaexc 1 sqmandn exc 2 sqm each complete all as specified & directed. |
| 44 | Refixing shutters of any description not exceeding 1 Sqm each in the same opening after and including taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete |
| 45 | Refixing shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after and including taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete. |
| 46 | S&F for 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete. |
| 47 | S&F 2nd class hardwoogfactory made 40 mm thick flushshutter solid core construction with block board core & plywood face panels commercial type on both sides incl 5mm thick teakwood leaping alround complete all as specified & directed. |
| 48 | S&F 2nd class hardwood factory made 35 mm thick pannel (two pannel) with lock rail and pannels of 9mm B.W.P. commercial ply and 12mm verneered particle board with commarcial veneered both faces. the size of rail and style as per IS-1003(Pt-I) kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 49 | S&F 2nd class hardwood factory made door, 35 mm thick, glazed and skeleton shutters, open rebated and prepated to receive glass gauze etc (with sash bars) edges of framing plain, chamfered or rounded materials and revated sash bars any number , edges of framing plain chemfered or rounded fitted with cut and mitred beads for securing glass in door etc or provided with styles and rails as specified in SSR part 1 section8, clause 8.24 (a) complete all as specified & directed. |
| 50 | S&F for 2nd class hardwood glazed and skeleton window shutter 30mm thick, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, to receive glass, gauze, etcor provided with styles and rails as specified in SSR part 1 section8, clause 8.24 (b) complete all as specified & directed. |
| 51 | S&F factory made steel windowwith side hung shutter frame includingprojecting type hinge with steel handle and steel peg stay complete with glazing bars , dovetailed or welded including a shop coat priming complete all as specified and directed. |
| 52 | M&L for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple complete all as specified & directed. |
| 53 | M&L for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple incl fixed in repair complete all as specified & directed. |
| 54 | Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified & directed. |
| 55 | M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed. |
| 56 | S&F 300mm long aluminium anodisedsliding door bolts , plate type ,stove enameled black , with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staple. |
| 57 | S&F MS butt hinges cold rolled meium weight of size 100mm etc complete all as specified & directed. |
| 58 | S&F MS butt hinges cold rolled meium weight of size 75 mm etc complete all as specified & directed. |
| 59 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and shown in drg in SSR Part -II 2020 complete all as specified and as directed. |
| 60 | S&F factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS frame shall be covered with heat moulded plain cover PVC C channel having a PVC sheet strip of 20mm with struck in side with solvent cement for styles and plain colour PVC sheet for top rail lock rail and bottom rail and either side as gap inserted for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading sheet and jointed together with solvent cement in frame at site as per specification andshown in drg in SSR Part -II 2020 complete all as specified and as directed. |
| 61 | S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed |
| 62 | S&F 100mmlong Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge , pin anodizedcomplete all as specified |
| 63 | S&F 150mm long aluminium anodised handle fabricatedtype complete all as specified and as directed by Engineer-In-Charge. |
| 64 | S&F in repairs 300mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate, complete all as specified and directed. |
| 65 | S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device vitrious Chaina pedestal pattern WC incl PVC seat cover and flush pipe etc complete all as specified and directed. |
| 66 | S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity, high or low level, white, with inlet, ball valve, float and handle including brackets, and connections to flush pipes of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. |
| 67 | S&F in repairs vitreous china urinal half stall type flat back size ofwhite with grating and union for discharge pipe including chromium plated water spreader , connection pipe and discharge down pipe complete all as specified and as directed. |
| 68 | S&F in repairs vitreous china Orissa pattern size 580mm x440mm white with ‘P’ or ‘S’ trap front or back inlet and foot rest any pattern complete all as specified and directed. |
| 69 | S&F in repairs for Wash basins, Vitreous China (flat back or angle back type) size 580X450mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe , complete all as specified and as directed. |
| 70 | S&F in repairs mirror glass of size 0.60X0.450m bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with cromium plated brass screw and cup washer etc complete all as specified and as directed. |
| 71 | S&F in repair brass CP Stop cock/ Angle cock 15mm fancy type choromium platedetc, complete all as specified and as directed. |
| 72 | S&Fin repairspillar taps cast copper alloy capstan heads, chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed shank and fly nuts screwed for iron pipe and fixed bore of pipe 15mm complete all as specified and direrected. |
| 73 | S&F in repairs bib taps cast copper alloy , choromium plated ,with crutch or butter fly handle screwed down screwed for iron pipe etc complete 15mm dia complete all as specified and as directed. |
| 74 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 75 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 76 | S&F in repair towel rail 600mm long of PTMT fixed with and including chromium plated brass screw and wooden/plastic cleats of weight minimum 190grm complete all as specified and as directed. |
| 77 | S&F in repair brass CP mixer, 15mm bore ,for mixing hot & cold water screw down for iron pipe , complete all as specified and as directed. |
| 78 | S&F in repairs Stainless steel sink with draining board made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mmx330mmx160mm |
| 79 | S&F in repairs Stainless steel sink1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 495mmx420mm with bowl size 410mmx330mmx160mm complete all as specified and directed |
| 80 | S&F in repairs 15mm dia bib tap standard of PTMT any colour high pressure screwed for iron pipes of make-Prayag ( min wt 90grms) |
| 81 | S&F in repairs 15mm dia pillar tap of PTMT any colour high pressure screwed for iron pipes of make-Prayag ( min wt 110grms) |
| 82 | S & F urinal spreader of PTMT 15mm size with PTMT nuts of length 300mm completeall as specified and directed. |
| 83 | S & F in repairs 20 mm dia Aluminium anodised tubular towel rail, D type, 60cm long between flanges complete all as specified and directed. |
| 84 | M & L cast iron floor trap 75mm out let dia with grating including jointing to waste pipefixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 85 | S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed. |
| 86 | S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed |
| 87 | S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed |
| 88 | S&F of PVC bends of any radius 110mm dia bore complete all as specified and directed . |
| 89 | S&F of PVC bends of any radius 75 mm dia bore complete all as specified and directed . |
| 90 | S&F of PVC bends of any radius 75mm dia bore complete all as specified and directed . |
| 91 | S&F in repair CP jet with 15mm bore flexible connecting pipe complete with all assembly as directed. |
| 92 | Schedule of Credit |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
