Tender For Periodical Services & Repair To Flooring , Roofing, Joinery False Ceiling , Plastering And Hard Standing To Certain Bldgs At Karcham And Poari In The Area Of Age B / R-I Pooh Under Ge 863 Ews.
Tender Value
15 Lakhs
Estimated cost
Bid Submission
19 Apr 2024
0 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
karcham → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Periodical Services & Repair To Flooring , Roofing, Joinery False Ceiling , Plastering And Hard Standing To Certain Bldgs At Karcham And Poari In The Area Of Age B / R-I Pooh Under Ge 863 Ews.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Apr-2024 | Tender Date Postpone | Date | 19-Apr-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 2 | M & L for rendering 15mm thick in cement plaster 1:4on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finishing even and smooth without using extra cement complete all as specified and directed. |
| 3 | M&L for preparation of newly plastered surfaces and applying two coats of white wash on walls all as specified and directed. |
| 4 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coveringscomplete all as specified and directed. |
| 5 | S&F0.63 mm thickgalvanised corrugatedmild steel sheeting with two corrugation side lapfixed with coach screws and washers, in roof ,walls etc with grade of zinc coating 120 gm per sqm. complete all as specified and as directed. |
| 6 | Ditto as per above item but except sheet |
| 7 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover filletscomplete all as specified and directed. |
| 8 | Dismantling Unframed timber scantlings 40 Sq. cm and over in section and in any position complete all as specified. |
| 9 | M & L 6 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work inceiling etc complete all as specified and as directed. |
| 10 | M&L 2nd class hard wood in scantling timber framed work fixed clean sawn directed completeall as specified and directed by Engr-in-charge. |
| 11 | S & F Second class hard wood plain fillets, wrought, square, rectangular or triangular in section, secured with screws, cross sectional area exceeding 3 and not exceeding 6 Sq. cmcomplete all as specified and directed. |
| 12 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided forcomplete all as specified and directed.. |
| 13 | M &L for 25 mm thick PCC 1:4:8 type D2 (Using 12.5mm gradedstone aggregate) as in sub base in floors complete all as specified and directed by Engr-in-charge |
| 14 | M&Lscreed bed or bedding layer of morter 15 mm thick cement plaster 1:6 for laying floor finished to receive floor tiles/granitecomplete all as specified and directed. |
| 15 | M & L for Virified Ceramic tilesLight shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchcomplete all as specified and directed. |
| 16 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 17 | M & L for 100 mm thick PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in surface of hardstanding finished even and smooth without using extra cement including spike rolling to surfaceor making impression of expanded metal, whilst the concrete is green complete all as specified and directed. |
| 18 | M & L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade \"A\" complete all as specified and directed. |
| 19 | M & L for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ all as specified and directed. |
| 20 | Taking down door chowkhat with shutter area n-exc 1.5 Sqmeach(without taking off shutters from the frame) complete all as specified & directed. |
| 21 | Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) complete all as specified & directed. |
| 22 | Taking down shutters of any description n. exc 1 sqm each complete all as specified & directed. |
| 23 | Taking down shutters of any description areaexc 1 sqmandn exc 2 sqm each complete all as specified & directed. |
| 24 | Refixing shutters of any description not exceeding 1 Sqm each in the same opening after and including taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete |
| 25 | Refixing shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after and including taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete. |
| 26 | S&F for 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed. |
| 27 | S&F 2nd class hardwoogfactory made 40 mm thick flushshutter solid core construction with block board core & plywood face panels commercial type on both sides incl 5mm thick teakwood leaping alround complete all as specified & directed. |
| 28 | S&F 2nd class hardwood factory made 35 mm thick pannel (two pannel) with lock rail and pannels of 9mm B.W.P. commercial ply and 12mm verneered particle board with commarcial veneered both faces. the size of rail and style as per IS-1003(Pt-I) kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 29 | S&F for 2nd class hardwood glazed and skeleton window shutter 30mm thick, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, to receive glass, gauze, etcor provided with styles and rails as specified in SSR part 1 section8, clause 8.20 (b) complete all as specified & directed. |
| 30 | Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified & directed. |
| 31 | M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed. |
| 32 | S&F 300mm long aluminium anodisedsliding door bolts , plate type ,stove enameled black , with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staplecomplete all as specified and directed. |
| 33 | S&F MS butt hinges cold rolled meium weight of size 75 mm etc complete all as specified & directed. |
| 34 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and shown in drg in SSR Part -II 2020complete all as specified and directed. |
| 35 | S&F factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS frame shall be covered with heat moulded plain cover PVC C channel having a PVC sheet strip of 20mm with struck in side with solvent cement for styles and plain colour PVC sheet for top rail lock rail and bottom rail and either side as gap inserted for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading sheet and jointed together with solvent cement in frame at site as per specification andshown in drg in SSR Part -II 2020complete all as specified and directed. |
| 36 | S&F 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed |
| 37 | S&F 100mmlong Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge , pin anodizedcomplete all as specified |
| 38 | S&F 150 mm long aluminium anodised handle fabricatedtype complete all as specified and as directed by Engineer-In-Charge. |
| 39 | S&F in repairs 300 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate, complete all as specified and directed. |
| 40 | M & L for complete removal ofexisting treatment of old plastered surfaces, preparation of wall and applying three coats of white wash complete all as specified and directed. |
| 41 | M & L for complete removal ofexisting treatment of old plastered surfaces, preparation of wall and applying two coats of cement base paint complete all as specified and directed. |
| 42 | M & L for preparation of old plastered surface of wall and applying one coat of oil emulsion distemper complete all as specified and directed. |
| 43 | M & L for preparation of old plastered surface of wall and applying one coat of white wash complete all as specified and directed. |
| 44 | M & L for preparation of old plastered surface of ceiling and applying one coat of white wash complete all as specified and directed. |
| 45 | M & L for preparation of old plastered surface of wall and applying one coat of cement base paint complete all as specified and directed. |
| 46 | M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed. |
| 47 | M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed. |
| 48 | M & L for removing of old paint by paint remover or burning off by blow lamps and cleaning with scrapers, any number of coats and any width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 49 | M & L for writing building Nos, letters or figures (Block,Roman, Italic or Indian) on walln exc. 30 cm height with synthetic enamel paint complete all as specified and directed . |
| 50 | Schedule of Credit |
AI Tender Summary
Tender Timeline
Apr 17, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Apr 19, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedApr 19, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 26, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender