Madhyanchal Vidut Vitran Nigam Limited has published Tender For Increasing Capacity Of Various Substation And Strengthening Of Various Substations And Its Lines Under Edc Pilibhit. Submission Date for this Tender is 16-04-2024. Substation Tenders in pilibhit Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 10-Apr-2024 | 100/EWC(B)/2023-24 | Date | 16-04-2024 |
| Sl. No. | Item Description |
| 1 | Part - (A) INCREASING CAPACITY OF 33/11KV S/S MADHO TANDA FROM 2x5 MVA TO 5+10 MVA |
| 2 | Loading, unloading and safe carriage of the following materials from any Electy. Store Center of Electricity store division of Bareilly zone. |
| 3 | 33 KV control pannel for doubleT/F |
| 4 | 33 KV Fuse Set |
| 5 | MS Channel 125x65mm |
| 6 | MS Angle 75x75x8 mm |
| 7 | 24V Battery set with charger |
| 8 | 33 kv O/D CT CTR 200/100/1 |
| 9 | 33KV VCB |
| 10 | Earthing of indoor & outdoor equipments of Sub-Station after proper welding of joints and painting of earth strip above soil with proper clamp etc. as per RESPO approved drawing & resistance of earthing should be not more than 2O as per details given below. |
| 11 | Making of triangular bridge by using MS electrode, GI strip 50x6mm and GI Pipe 40 mm dia with providing of well type pipe earthing upto 15 Mtr. depth below ground level including welding etc. by boaring process at T/F neutral, LA and newly erected structure including cost of GI pipe of size 40 mm dia 15 mtr. long of ISI mark.(all the required material will be supllied by the contractor). |
| 12 | Supply of GI strip of size 50x6mm for earthing of all newly erected structures and equipments in switchyard including cutting, fixing & proper welding with equipments. All LA will be seprately earth also as per RESPO norms. (All the required materials will be provided by firm.) |
| 13 | Fabrication, erection and grouting of the following structures as per RESSPO/ Approved Drawing and its, plinth 30cm above ground leval as directed by the Engineer Incharge (All steel sections will be provided by Deptt). |
| 14 | Fuse Set Structure |
| 15 | Installation of followig equipments on their respective structures including mechanical & electrical fixing after proper adjustment on their structure. |
| 16 | 33 KV VCB complete |
| 17 | 33 KV CT |
| 18 | 33 KV Fuse Set |
| 19 | 24 V Battery set with charger(To be provided by firm) I.S.I. mark only of DC System with one float cum boost charger & battery set for 24V. System with 150A.H. Capacity with cabinet). |
| 20 | Dismantling of existing following damage equipments on their structure. |
| 21 | 33 KV VCB |
| 22 | 33 KV CT |
| 23 | 33 KV DOUBLE TF CONTROL PANNAL |
| 24 | Complete laying and termination of copper control cables from both (old and new 10 MVA TF) 33 KV VCB, 33 KV CT,10 MVA power T/F in the out door switch yard to new single transformer relay control panel inside the control room including cost of all materials and labour required for proper completion of works as per RESSPO drawings, including cost of testing of transformer, VCB, CT, relay pannel & proper relay settings as per requirement etc. |
| 25 | Control Cable 4x2.5 mm2 |
| 26 | Control Cable 2x2.5 mm2 |
| 27 | Erection & testing of 1 No. double T/F Control pennel in substation control room including grouting of anchor bolts of panel and making of pocket for control cable to insert in pannel from trench and complete filling of control room"s tranches by river sand. |
| 28 | Safely shifting and dragging of 33/11 KV 5 MVA transformer from its plinth to safe site at Sub-station. Including its proper disconnecting of HT, LT side connection, neutral , Body earthing etc. |
| 29 | Shifting and dragging of 33/11 KV 10 MVA transformer from road side to its plinth alongwith its erection including fixing of all assessories and top-up of T/F oil. |
| 30 | Carriage of old & used 5MVA Transformer from site to store center Pilibhit. |
| 31 | Carriage of oldscrap material from site to store center Pilibhit. |
| 32 | Painting of Complete bay Structure |
| 33 | Complete repairnig of swichyard fencing. |
| 34 | Part - (B) INCREASING CAPACITY OF 33/11KV S/S PURANPUR RURAL FROM 8 MVA TO 10 MVA |
| 35 | Earthing of indoor & outdoor equipments of Sub-Station after proper welding of joints and painting of earth strip above soil with proper clamp etc. as per RESPO approved drawing & resistance of earthing should be not more than 2O as per details given below. |
| 36 | Making of triangular bridge by using MS electrode, GI strip 50x6mm and GI Pipe 40 mm dia with providing of well type pipe earthing upto 15 Mtr. depth below ground level including welding etc. by boaring process at T/F neutral, LA and newly erected structure including cost of GI pipe of size 40 mm dia 15 mtr. long of ISI mark.(all the required material will be supllied by the contractor). |
| 37 | Supply of GI strip of size 50x6mm for earthing of all newly erected structures and equipments in switchyard including cutting, fixing & proper welding with equipments. All LA will be seprately earth also as per RESPO norms. (All the required materials will be provided by firm.) |
| 38 | Complete laying and termination of copper control cables from 10 MVA power T/F, 33 KV VCB, 33 KV CT in the out door switch yard to new single transformer relay control panel inside the control room including cost of all materials and labour required for proper completion of works as per RESSPO drawings, including cost of testing of transformer, VCB, CT, relay pannel & proper relay settings as per requirement etc. |
| 39 | Control Cable 4x2.5 mm2 |
| 40 | Control Cable 2x2.5 mm2 |
| 41 | Safely shifting and dragging of 33/11 KV 5 MVA transformer from its plinth to safe site at Sub-station. Including its proper disconnecting of HT, LT side connection, neutral , Body earthing etc. |
| 42 | Shifting and dragging of 33/11 KV 10 MVA transformer from road side to its plinth alongwith its erection including fixing of all assessories and top-up of T/F oil. |
| 43 | Carriage of old and used 5MVA transformer and old scrap material from site to store center Pilibhit. |
| 44 | Painting of Complete bay Structure |
| 45 | Complete repairnig of swichyard fencing. |
| 46 | Part - (C) INCREASING CAPACITY OF 33/11KV S/S PURANPUR TOWN FROM 10+5 MVA TO 2x10 MVA |
| 47 | Loading, unloading and safe carriage of the following materials from any Electy. Store Center of Electricity store division of Bareilly zone. |
| 48 | 33 KV Fuse set |
| 49 | MS Channel 125x65mm |
| 50 | MS Angle 75x75x8 mm |
| 51 | 33 KV Bus Isolator |
| 52 | 33 KV LA |
| 53 | 33 KV VCB |
| 54 | 33 KV control panel double T/F |
| 55 | 33 kv O/D CT CTR 200/100/1 |
| 56 | Earthing of indoor & outdoor equipments of Sub-Station after proper welding of joints and painting of earth strip above soil with proper clamp etc. as per RESPO approved drawing & resistance of earthing should be not more than 2O as per details given below. |
| 57 | Making of triangular bridge by using MS electrode, GI strip 50x6mm and GI Pipe 40 mm dia with providing of well type pipe earthing upto 15 Mtr. depth below ground level including welding etc. by boaring process at T/F neutral, LA and newly erected structure including cost of GI pipe of size 40 mm dia 15 mtr. long of ISI mark.(all the required material will be supllied by the contractor). |
| 58 | Supply of GI strip of size 50x6mm for earthing of all newly erected structures and equipments in switchyard including cutting, fixing & proper welding with equipments. All LA will be seprately earth also as per RESPO norms. (All the required materials will be provided by firm.) |
| 59 | Fabrication, erection and grouting of the following structures as per RESSPO/ Approved Drawing and its, plinth 30cm above ground leval as directed by the Engineer Incharge (All steel sections will be provided by Deptt). |
| 60 | 33KV Fuse set Structure |
| 61 | Installation of followig equipments on their respective structures including mechanical & electrical fixing after proper adjustment on their structure. |
| 62 | 33 KV CT |
| 63 | 33 KV LA |
| 64 | 33 KV VCB |
| 65 | 33 KV Fuse Set |
| 66 | Dismantling of existing following damage equipments on their structure. |
| 67 | 33 KV CT |
| 68 | 33 KV LA |
| 69 | 33 KV VCB |
| 70 | Complete laying and termination of copper control cables from 10 MVA power T/F, 33 KV VCB, 33 KV CT in the out door switch yard to new single transformer relay control panel inside the control room including cost of all materials and labour required for proper completion of works as per RESSPO drawings, including cost of testing of transformer, VCB, CT, relay pannel & proper relay settings as per requirement etc. |
| 71 | Control Cable 4x2.5 mm2 |
| 72 | Control Cable 2x2.5 mm2 |
| 73 | Dismentaling of existing damage 33 KV control panel. |
| 74 | Erection & testing of 1 No. double T/F Control penel in substation control room including grouting of anchor bolts of panel and making of pocket for control cable to insert in panel from trench and complete filling of control room"s tranches by river sand. |
| 75 | Safely shifting and dragging of 33/11 KV 5 MVA transformer from its plinth to safe site at Sub-station. Including its proper disconnecting of HT, LT side connection, neutral , Body earthing etc. |
| 76 | Shifting and dragging of 33/11 KV 10 MVA transformer from road side to its plinth alongwith its erection including fixing of all assessories and top-up of T/F oil. |
| 77 | Carriage of old and used 5MVA transformer and old scrap material from site to store center Pilibhit. |
| 78 | Painting of Complete bay Structure |
| 79 | Complete repairnig of swichyard fencing. |
| 80 | Part - (D) REPAIR AND REPLACEMENT OF 33 KV EQUIPMENT IN BISALPUR RURAL S/S UNDER EDD BISALPUR |
| 81 | Loading, unloading and safe carriage of the following materials from any Electy. Store Center of Electricity store division of Bareilly zone. |
| 82 | 33 KV Line Isolator |
| 83 | 33 KV LA |
| 84 | 33 KV VCB |
| 85 | 33 KV control pannel for doubleT/F |
| 86 | 33 KV control pannel for SingleT/F |
| 87 | Fuse Set |
| 88 | MS Channel 125x65mm |
| 89 | MS Angle 75x75x8 mm |
| 90 | 33 kv O/D CT CTR 200/100/1 |
| 91 | Earthing of indoor & outdoor equipments of Sub-Station after proper welding of joints and painting of earth strip above soil with proper clamp etc. as per RESPO approved drawing & resistance of earthing should be not more than 2O as per details given below. |
| 92 | Making of triangular bridge by using MS electrode, GI strip 50x6mm and GI Pipe 40 mm dia with providing of well type pipe earthing upto 15 Mtr. depth below ground level including welding etc. by boaring process at T/F neutral, LA and newly erected structure including cost of GI pipe of size 40 mm dia 15 mtr. long of ISI mark.(all the required material will be supllied by the contractor). |
| 93 | Supply of GI strip of size 50x6mm for earthing of all newly erected structures and equipments in switchyard including cutting, fixing & proper welding with equipments. All LA will be seprately earth also as per RESPO norms. (All the required materials will be provided by firm.) |
| 94 | Fabrication, erection and grouting of the following structures as per RESSPO/ Approved Drawing and its, plinth 30cm above ground leval as directed by the Engineer Incharge (All steel sections will be provided by Deptt). |
| 95 | Fuse Set Structure |
| 96 | Installation of followig equipments on their respective structures including mechanical & electrical fixing after proper adjustment on their structure. |
| 97 | 33 KV Line isolator |
| 98 | Lightening Arrestor |
| 99 | 33 KV VCB complete |
| 100 | 33 KV CT |
| 101 | Complete laying and termination of copper control cables from bothT/F, 33 KV VCB, 33 KV CT,10 MVA power T/F in the out door switch yard to new single transformer relay control panel inside the control room including cost of all materials and labour required for proper completion of works as per RESSPO drawings, including cost of testing of transformer, VCB, CT, relay pannel & proper relay settings as per requirement etc. |
| 102 | Control Cable 4x2.5 mm2 |
| 103 | Control Cable 2x2.5 mm2 |
| 104 | Laying of dog conductor alongwith cost of all required calmps and connectors etc. as per RESSPO Approved drawing of Bus bar L.A., C.T., V.C.B., Bus Isolator etc. |
| 105 | Dismantaling of existing damage control panel. |
| 106 | Erection & testing ofT/F Control pennel in substation control room including grouting of anchor bolts of panel and making of pocket for control cable to insert in pannel from trench and complete filling of control room"s tranches by river sand. |
| 107 | Carriage of old scrap material from site to store center Bareilly. |
| 108 | PART (E)-CONSTRUCTION OF 0.88 KM. 33KVLINE(CONVERSION FROM SINGLE CKT TO DOUBLE CKT ) BETWEEN RAILWAY PHATAK AND SHERO WALA TIRAHA UNDER 33/11 KV S/S STORE CENTER , PILIBHIT |
| 109 | Carriage of following line materials for 33 KV line from any Store Centre of Bareilly zone, Bareilly to site of work including measuring, weighing, loading, unloading at both ends and proper stacking at safe site. |
| 110 | 33 KV 3X300mm2 XLPE Cable |
| 111 | 33 KV 3X300mm2 XLPE Cable jointing kit O/D |
| 112 | 33 KV 3X300mm2 XLPE Cable jointing kit S/through |
| 113 | ST pole 11 Mtr. Long |
| 114 | 33 KV pin insulator |
| 115 | 33 KV pin with nut |
| 116 | M.S. Earthing rod |
| 117 | M.S angle 65x65x6mm, 2700mm |
| 118 | Top channel 125x65x6mm 3200mm |
| 119 | T- Off Channel 125x65x1300mm |
| 120 | ACSR Dog conductor |
| 121 | Erection of the following support including cutting, making holes, fixing of all types of accessories digging pits complete in all respect as per RESSPO drawing. All types of clamps nuts & bolts,stone pad, washer would be provided by contractor. |
| 122 | Double pole cable exposer of ST pole |
| 123 | Concreting of supports in 1:4:8 ratio and plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing.All matrial would be provided by the contractor. |
| 124 | Earthing of each S.T Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor. |
| 125 | Painting of following supports with one coat of red oxide primer and two coats of aluminum white paint of ISI mark and top danger portion of each support must be painted by providing two coat of Post Office Red Paint (1.5mtr upper portion of support.) Paint and material would be given by contractor to complete the job. |
| 126 | Double pole cable exposer of ST pole |
| 127 | Fixing of danger board on each location and G.I barbed wire including proper clamping and providing anti climbing device by using including supply of the above items. |
| 128 | Fixing of number plate on each location and G.I barbed wire including proper clamping and providing anti climbing device by using including supply of the above items. |
| 129 | Cable laying by drill method single circuit in HDPE Pipe. |
| 130 | Laying of single circuit 33 KV 3X300 Sq. mm XLPE cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Interaxial spacing between the two cable should be in between 0.25 m to 0.40m. (All the material required for laying will be supplied by the contractor except 33 KV XLPE cable) |
| 131 | Hoisting of 33 KV 3X300 Sq. mm. XLPE cable on double pole with GI pipe of size 6" dia 3 M longincluding its jumpering complete with clamps, nuts and bolts. |
| 132 | Fixing of 33 KV O/D or I/D Cable Jointing Kit |
| 133 | Fixing of 33 KV S/Th Cable Jointing Kit |
| 134 | Fixing of cable route marker. |
| 135 | PART (F) - CONSTRUCTION OF 0.15 KM 33KV LINE (DOUBLE CKT ) ACROSS ROAD CROSSING NEAR 33/11KV SS BARKHEDA TOWN, PILIBHIT |
| 136 | Carriage of following line materials for 33 KV line from any Store Centre of Bareilly zone, Bareilly to site of work including measuring, weighing, loading, unloading at both ends and proper stacking at safe site. |
| 137 | 33 KV 3X300mm2 XLPE Cable |
| 138 | 33 KV 3X300mm2 XLPE Cable jointing kit O/D |
| 139 | 33 KV 3X300mm2 XLPE Cable jointing kit S/through |
| 140 | Erection of the following support including cutting, making holes, fixing of all types of accessories digging pits complete in all respect as per RESSPO drawing. All types of clamps nuts & bolts,stone pad, washer would be provided by contractor. |
| 141 | Cable laying by drill method single circuit in HDPE Pipe. |
| 142 | Laying of single circuit 33 KV 3X300 Sq. mm XLPE cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Interaxial spacing between the two cable should be in between 0.25 m to 0.40m. (All the material required for laying will be supplied by the contractor except 33 KV XLPE cable) |
| 143 | Hoisting of 33 KV 3X300 Sq. mm. XLPE cable on double pole with GI pipe of size 6" dia 3 M longincluding its jumpering complete with clamps, nuts and bolts. |
| 144 | Fixing of 33 KV O/D or I/D Cable Jointing Kit |
| 145 | Fixing of 33 KV S/Th Cable Jointing Kit |
| 146 | Fixing of cable route marker. |
| 147 | PART (G) - RECONDUCTORING OF 2.0 CKT KM. 33KVLINE FROM NAWADA TO 33/11 KV KV S/S BARKHEDA TOWN, PILIBHIT |
| 148 | Carriage of following line materials for 33 KV line from any Store Centre of Bareilly zone, Bareilly to site of work including measuring, weighing, loading, unloading at both ends and proper stacking at safe site. |
| 149 | ST pole 11 Mtr. Long |
| 150 | 33 KV cross arm |
| 151 | 33 KV pin insulator |
| 152 | 33 KV pin with nut |
| 153 | M.S. Earthing rod |
| 154 | ACSR Dog conductor |
| 155 | 11 KV disc insulator B&S type 70 KN |
| 156 | Disc fitting Dog/Racoon 70 KN |
| 157 | Complete Stay set complete |
| 158 | Gaurding angle 65x65x2950 |
| 159 | G.I wire 8 Swg |
| 160 | Erection of the following support including cutting, making holes, fixing of all types of accessories digging pits complete in all respect as per RESSPO drawing. All types of clamps nuts & bolts,stone pad, washer would be provided by contractor. |
| 161 | Single support of ST Pole 11mtr long |
| 162 | Erection/fixing for stay set with stay wire and clamp as per RESSPO drawing including binding,clamping, tightening, and nozzeling etc. complete in all respect including its grouting in ratio 1:4:8 of cement, sand and brick ballast and sand before back filling of the pits as per RESSPO schedule all clamps, nuts & bolts, cement, brick, concrete etc would be provided by contractor. |
| 163 | Concreting of supports in 1:4:8 ratio and plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing.All matrial would be provided by the contractor. |
| 164 | Laying and sagging of 3 phase ACSR Dog conductor including jumpering, hoisting, fixing of all type of insulators,armor rod, ferrule, binding, jointing and its clamping etc. in all respect. |
| 165 | Safe dismentling of old & rotten ACSR Raccon conductor of existing 33 KV Line without damage of any insulator, cross arm, clamp etc. of existing 33 KV line. |
| 166 | Earthing of each S.T Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor. |
| 167 | Dismantaling of old damage x-arm (15No.) and insulators (66No.)and erection of new 33 KV X-arm (15No.) and Pin insulators(66 No.) in place of damage X-arm and insulators. |
| 168 | Fabrication and fixing of guarding angle on Single/double poles, Stringing and sagging of three nos. Earth/GI wire with cardle guarding of above 33 KV line as per RESSPO Norms including provision of all necessary clamps and hooks. Shifting of existing line conductor of 11 KV/LT line to maintain proper clearance in between both lines (all required material will be provided by the contractor except guarding angle and earth/GI wire). |
| 169 | Painting of following supports with one coat of red oxide primer and two coats of aluminum white paint of ISI mark and top danger portion of each support must be painted by providing two coat of Post Office Red Paint (1.5mtr upper portion of support.) Paint and material would be given by contractor to complete the job. |
| 170 | Single Pole of S.T Pole . |
| 171 | Fixing of danger board and number plate on each location and G.I barbed wire including proper clamping and providing anti climbing device by using including supply of the above items. |
| 172 | Clearing of the line route by cutting of tree branches during erection of line and also upto the time of energisation completely as per direction of Incharge. |
| 173 | Loading, unloading and safe carrige of old & rotten Raccon conductor from site to Store center, Pilibhit. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
