|
| 1 | DOUBLE ENDED OPEN SPANNERS MATERIAL TO DIN-3110 STANDARD (1SET) 6X7,8X9,10X11,12X13,14X15,16X17, 18X19,20X22,21X23,24X26,25X28,27X32, 30X32,32X36,36X41,41X46, CONFORMING TO IS 2028:2019 STANDARDS |
| 2 | DOUBLE ENDED RING SPANNERS MATERIAL CHROME VANADIUM STEEL CONFORMING TO DIN-838 STANDARD (1 SET) 6X7,8X9,10X11,12X13,14X15,16X17, 18X19,20X22,21X23,24X26,25X28,27X32, 30X32,32X36,36X41,41X46,CONFORMING TO IS 3082 : 2019 STANDARDS. |
| 3 | PIPE WRENCH 18inch H.D,CONFIRIMING TO IS 4003 : Part 2 : 2019 STANDARDS |
| 4 | HEAVY DUTY PIPE WRENCH OF SG IRON WITH NOMINAL SIZE 12inch (300MM),PIPE CAPACITY MINIMUM 13MM AND MAXIMUM 51MM MAKE:TAPARIA,CONFORMING TO IS 3082 : 2019 STANDARDS. |
| 5 | CAPACITY: 1 TONS X 12 MTRS LIFT,CONFORMING TO IS 3832:2020 STANDARDS. |
| 6 | CHAIN PULLEY BLOCK,INDEF-MAKE TRIPLE SPUR GEAR MANUALWITH FACTORY FITTED LOAD AND HAND CHAIN WITH SAFETY LATCH IN TOP and BOTTOM HOOK CAPACITY 2 TON X 6 MTRS LIFT (2 FALL),CONFORMING TO IS 3832:2020 STANDARDS. |
| 7 | SHIM CUTTER MAKE: TAPARIA, CODE NO: TCS 08,CONFORMING TO IS 5200:2019 STANDARDS. |
| 8 | ADJUSTABLE SCREW SPANNERS WITH SOFT GRIP,MODEL NO:1171-S-8,CONFORMING TO IS 6149:2021 STANDARDS. |
| 9 | ADJUSTABLE SCREW SPANNERS WITH SOFT GRIP GRIP,MODEL NO:1172-S-10,CONFORMING TO IS 6149:2021 STANDARDS |
| 10 | ADJUSTABLE SCREW SPANNERS WITH SOFT GRIP,MODEL NO:1173-S-12,CONFORMING TO IS 6149:2021 STANDARDS. |
| 11 | ACETYLENE (A-15)DOUBLE STAGE,ACETYLENE REGULATORS,MAKE:HMP,CONFORMING TO DOC NO.APG-WELDING AND CUTTING ACCESSORIES ,Dt.17.01.2018,Rev.00 |
| 12 | OXYGEN (A-10)DOUBLE STAGE,OXYGEN REGULATOR REGULATOR,MAKE:HMP,CONFORMING TO DOC NO.APG-WELDING AND CUTTING ACCESSORIES ,Dt.17.01.2018,Rev.00 |
| 13 | CUTTING NOZZLES PNM 1/32,MAKE:HMP,CONFORMING TO DOC NO.APG-WELDING AND CUTTING ACCESSORIES ,Dt.17.01.2018,Rev.00 |
| 14 | CUTTING NOZZLES PNM 3/64,MAKE:HMP, CONFORMING TO DOC NO.APG-WELDING AND CUTTING ACCESSORIES ,Dt.17.01.2018,Rev.00 |
| 15 | CUTTING NOZZLE,ANME1/32,CONFORMING TO DOC NO.APG-WELDING AND CUTTING ACCESSORIES ,Dt.17.01.2018,Rev.00 |
| 16 | GAS CUTTING TORCH CUTTER WITH ANM 3/64 ZOZZLE,MAKE:HMP,CONFORMING TO DOC NO.APG-WELDING AND CUTTING ACCESSORIES ,Dt.17.01.2018,Rev.00 |
| 17 | NOZZLE,SIZE:1/16 IN,Conforming to IS 7653: 2019 STANDARDS. |
| 18 | ARGON REGULATOR SINGLE STAGE,Conforming to IS 6901:2018 STANDARDS. |
| 19 | PUNCH SET HOLLOW PUNCH BITS IN MM 2,3,4,5,6,7,8,9,10,12,14,16,18,20,22,24,26,28,30,32,34,36,38,40,42,44, 46,48,AND 50,CONFIRMING TO IS 4296:2021 STANDARDS |
| 20 | CENTRE PUNCH-125MM (1 NO.EACH) MAKE:TAPARIA,CONFIRMING TO IS 7177:2021STANDARDS. |
| 21 | CENTRE PUNCH-150MM (1 NO.EACH) MAKE:TAPARIA,CONFIRMING TO IS 7177:2021STANDARDS. |
| 22 | HOLE PUNCH SET 4 TO 32 BEST QUALITY,CONFIRMINGTO IS 7177:2021 STANDARDS |
| 23 | CIRCLIP PLIER 7 INCH INTERNAL,CONFIRMING TO IS 7989:2019 STANDARDS. |
| 24 | CIRCLIP PLIER 7 INCH EXTERNAL,CONFIRMING TO IS 7990:2019 STANDARDS. |
| 25 | CIRCLIP PLIER 90 DEGREES BEND 7 INCH EXTERNAL,CONFIRMING TO IS 7990:2019 STANDARDS. |
| 26 | CIRCLIP PLIER 90 DEGREES BEND 7 INCH INTERNAL,CONFIRMING TO IS 7989:2019 STANDARDS. |
| 27 | PLIER,CIRCLIP,SIZE:195 MM,MODEL:1441-7, ADDITIONAL INFORMATION:INTERNAL ST. NOSE,CONFIRMING TO IS 7989:2019 STANDARDS. |
| 28 | CIRCLIP EXTERNAL PLIERS,MODEL NO:1443-7,CONFIRMING TO IS 7990:2019 STANDARDS. |
| 29 | NYLON MALLET 30MM,MODEL NO:SFH-30,Conforming to IS 10838:2021 STANDARDS. |
| 30 | STEEL MEASUREMENT TAPE -3 MTR,CONFORMING TO IS 1269 : 2018 STANDARDS. |
| 31 | HACK SAW FRAME - 12,CONFORMING TO IS 5169 : 2019 STANDARDS. |
| 32 | HACKSAW FRAME 6MM,CONFORMING TO IS 5169 : 2019 STANDARDS. |
| 33 | BALL PEAN HAMMER WITH WOODEN HAMDLE-200,340,500 AND 600G,CONFORMING TO I 4953 : 2017 STANDARDS |
| 34 | NYLON MALLET 40MM MAKE :TAPARIA,Conforming to IS 10838:2021 STANDARDS. |
| 35 | RUBBER MALLET,SIZE:2 2INCH double-facedsolid rubber head with round striking surfaces and a strong wood handle for durability |
| 36 | SLEDGE HAMMER,2LB,,confirming to IS 841:2021 Standards |
| 37 | HAMMER,SLEDGE,TYPE:SLEDGE ,WEIGHT:4 LB,,confirming to IS 841:2021 Standards |
| 38 | FLAT CHISELS 150MM MODEL:102,MAKE:TAPARIA,Conforming to IS 1930 :2019 STANDARDS. |
| 39 | CHISEL COLD,200MM,Conforming to IS 402:2019 STANDARDS |
| 40 | CLOTH TYPE MEASURING TAPE,30M, |
| 41 | LETTER PUNCH OF LENGTH 70MM(25NOS) ,T ANDP ITEMS |
| 42 | NUMBER PUNCH (0 TO9) 5MM |
| 43 | HAMMER,10LB, confirming to IS 841:2021 Standards. |
| 44 | HAMMER,8LBS, confirming to IS 841:2021 Standards. |
| 45 | HAND FILES 12,10,8,6 INCHES (1SET CONSISTS OF 4 NOS),,confirming to IS1931:2021 standards. |
| 46 | FILES HALF ROUND PILOT 12,,confirming to IS1931:2021 standards |
| 47 | FILES TRIANGULAR PILOT 10,,confirming to IS1931:2021 standards. |
| 48 | OUTSIDE MICROMETER 0MM TO 50MM MAKE:MITUTOYO JAPAN,CONFORMING TO IS 2967:2019 STANDARDS. |
| 49 | SPIRIT LEVEL (0.5MM ACCURACY WITH MAGNET),CONFORMING TO IS 5706,2022 STANDARDS. |
| 50 | WELDING MACHINE,300A,1PH,230/40V RECTIFIER,CONFIRMING TO IEC 60974- 10 STANDARDS. |
| 51 | GAUGE,FEELER ,RANGE:0.03 TO 1 MM LENGTH:6 INCH,CONFORMING TO IS 3179: 2020 STANDARDS. |
| 52 | GAUGE,FEELER RANGE:0.03 TO 1 MM NUMBER OF LEAVES:26,CONFORMING TO IS 3179: 2020 STANDARDS. |
| 53 | ADJUSTMENT SPANNER -18 inch (INCH),,CONFIRMING TO IS 6149:2021 STANDARDS. |
| 54 | SPANNER,BOX SIZE:8 TO 32 MM MATERIAL:CAST IRON,CONFIRMING TO IS 11379 STANDARDS. |
| 55 | BLOCK,CHAIN PULLE,TYPE CAPACITY:5 T MAXI LIFT:5 M MAKE:PLANTAIDS,CONFORMING TO IS 3832:2020 STANDARDS. |
| 56 | BLOCK,CHAIN PULLEY TYPE:P CAPACITY:3 T MAXI LIFT:10 M,CONFORMING TO IS 3832:2020 STANDARDS. |
| 57 | BLOCK,CHAIN PULLEY TYPE:P CAPACITY:2 T MAXI LIFT:10 M,CONFORMING TO IS 3832:2020 STANDARDS. |
| 58 | WRENCH,PIPE, TYPE : HEAVY DUTY SIZE : 24 IN SPECIAL FEATURES :FORGED MAKE : EVEREST,CONFIRIMING TO IS 4003 : Part 2 : 2019 STANDARDS |
| 59 | PIPE WRENCH,HEAVY DUTY,SIZE NO:36 inch ,CONFIRIMING TO IS 4003 : Part 2 : 2019 STANDARDS. |
| 60 | INSIDE MICROMETER(0-150MM), CONFORMING TO IS 2966:2019 STANDARDS. |
| 61 | INSIDE MICROMETER(150-300MM), CONFORMING TO IS 2966:2019 STANDARDS. |
| 62 | CALIPER,VERNIER,TYPE:DIGITAL RANGE:300 MM MAKE:MITUTOYO,CONFORMING TO IS 3651 STANDARDS. |
| 63 | MICROMETER,TYPE:OUT SIDE RANGE:0 - 25 MM,CONFORMING TO IS 2966:2019 STANDARDs, CONFORMING TO IS 2967:2019 STANDARDS |
| 64 | DIAL GAUGE RANGE 0 TO 10MM LC:0.01MM MAKE:MITUTOYO JAPAN,,CONFIRMING TO IS 11498 STANDARDS. |
| 65 | MAGNETIC STAND FOR DIAL GAUGES MAKE:MITUTOYO JAPAN, |
| 66 | BEVEL PROTRACTOR-150M2,MAKE:MITUTOYD |
| 67 | DandH SECHERON MAKE WELDING MACHINE RECTIFIER-400 A, CONFIRMING TO IEC 60974- 10 STANDARDS. |
| 68 | WELDING HOLDER, confirming to IS 4972 standards. |
| 69 | CABLE,WELDING,SHEATH MATERIAL MATERIAL:ALUMINIUM, 1 NO EQUAL TO 1 METER,TOTAL REQUIRED QUANTITY :30 METERS: QUOTED (UNIT) RATE PER METER ONLY |
| 70 | KASHNIR CUTTING TORCH,Conforming to DOC NO.APG-WELDING AND CUTTING ACCESSORIES,Dt.17.01.2018,Rev.00. |
| 71 | MONOBLOCK PUMP SET WITH DOL STARTER AND 25 MTRS CABLE, PUMP MODEL: KS 513 PLUS , 100X100(SXD), 5HP, 3PHASE AC POWER POWER,,SHOULD HAVE BODY MATERIAL: CAST IRON , IMPELLER MATERIAL CASTIRON, INSULATION CLASS:B ,SPEED: 300RPM,SHAFT MATERIAL: CARBON STEEL . |
| 72 | WOLF GRINDING MACHINE,GA4, MODEL GQ4BR, HEAVY DUTY, WITH BODY OF ALLUMINUM DIE CASTING ,WATTS INPUT (FULL LOAD):775 W,NO LOAD SPEED: 5000 RPM. |
| 73 | PNEUMATIC STRAIGHT TYPE GRINDER INCLUDING NIPPLE OF OD 12MM MODEL AG- 60,AIR PR 6 KG/CM squire AIR HOSE SIZE OD 12.5 MM WHEEL SIZE 63 MM SPEED 14500 RPM |
| 74 | MACHINE,BOLT TIGHTENING TYPE:PNEUMATIC OPERATED OPERATED,CONFIRIMING TO ISO 16047 :2005 STANDARDS. |
| 75 | MACHINE,PORTABLE DRILLING MACHINE MODEL GBM 10 WATAGE 420 W,DRILLING DIAMETER : In wood 25 mm : In steel 10 mm,No-load speed 2200 rpm Weight 1.4 Kg |
| 76 | GAUGE,THREAD TYPE:PITCH,CONFIRMING |
| 77 | HEAVY DUTY MECHANICAL BEARINGS PULLER TYPE: EXTERNAL PULL,NO. OF ARMS : 02 WIDTH (MAX. SPREAD): 15 - 65MM TMMP 2X65, CONFIRMING TO IS 9193:2019 STANDARDS |
| 78 | SLING,6M,EACH 20TON,as per Doc No. APG Webbing Slings Dt. 17-08-2017 Rev.00. |
| 79 | BELT SLING,5M,5T, as per Doc No. APG Webbing Slings Dt. 17-08-2017 Rev.00 |
| 80 | SLING BELT 10TON 6 METRES,as per Doc No. APG Webbing Slings Dt. 17-08-2017 Rev.00. |
| 81 | EYE BOLTS 6MM,CONFIRIMING TO ISO:3266:2015 STANDARDS. |
| 82 | EYE BOLTS 8MM,CONFIRIMING TO ISO:3266:2015 STANDARDS |
| 83 | EYE BOLTS M.S. FORGED UNGALVANIZED WITH COLLAR TYPE TESTED WITH TCandGC SIZE:10 MM DIA,CONFIRIMING TO ISO:3266:2015 STANDARDS. |
| 84 | BELT SLING, 1 TON, as per Doc No. APG Webbing Slings Dt. 17-08-2017 Rev.00. |
| 85 | WIRE ROPE SLINGS WITH EYE and EYE, 25TON X 1 1/4 X 6 MTRS LENGTH,as per DOC No. APG-Wire Rope Slings Dt.17-08-17 Rev.00 |
| 86 | STEEL WIRE ROPE SLINGS OF STANDARD MAKE SIZE: (C) 10MMX1MTR,as per DOC No. APG-Wire Rope Slings Dt.17-08-17 Rev.00 |
| 87 | STEEL WIRE ROPE SLINGS OF STANDARD MAKE SIZE: (D) 12MMX1MTR,as per DOC No. APG-Wire Rope Slings Dt.17-08-17 Rev.00 |
| 88 | STEEL WIRE ROPE SLINGS OF STANDARD MAKE SIZE: (F) 20MMX6MTR,as per DOC No. APG-Wire Rope Slings Dt.17-08-17 Rev.00 |
| 89 | STEEL WIRE ROPE SLINGS OF STANDARD MAKE SIZE: (G) 24MMX6MTR,as per DOC No. APG-Wire Rope Slings Dt.17-08-17 Rev.00 |
| 90 | NYLON SLING, CAPACITY:1TON, LENGTH:3MTR, as per DOC No. APG-Wire Rope Slings Dt.17-08-17 Rev.00 |
| 91 | NYLON SLING, CAPACITY:3TON, LENGTH:3MTR,as per DOC No. APG-Wire Rope Slings Dt.17-08-17 Rev.00as per |
| 92 | NYLON SLING, CAPACITY:6TON, LENGTH:6MTR as per DOC No. APG-Wire Rope Slings Dt.17-08-17 Rev.00 |
| 93 | NYLON SLING, CAPACITY:10TON, LENGTH:6MTR,as per DOC No. APG-Wire Rope Slings Dt.17-08-17 Rev.00 |
| 94 | SCREW PIN TYPE DEE SHAKLES 2 TON,CONFORMING TO IS 2415 :2019 STANDARDS. |
| 95 | SCREW PIN TYPE DEE SHAKLES 3.25 TON,CONFORMING TO IS 2415 :2019 STANDARDS. |
| 96 | SCREW PIN TYPE DEE SHAKLES 6.5 TON,CONFORMING TO IS 2415 :2019 STANDARDS. |
| 97 | SCREW PIN TYPE DEE SHAKLES 12 TON,CONFORMING TO IS 2415 :2019 STANDARDS. |
| 98 | 10 TON D SHACKLE ROD DIA:36MM36MM,PIN DIA:40MM,TOTAL LENGTH OF SHACKLE 215MM, U INSIDE HORIZONTAL GAP 55MM,CONFORMING TO IS 2415 :2019 STANDARDS. |
| 99 | D SHACKLE,5 T,CONFORMING TO IS 2415 :2019 STANDARDS. |
| 100 | SHACKLE,TYPE:D,LOAD RATING:1 T,CONFORMING TO IS 2415 :2019 STANDAR |
