Miscellaneous Civil Works Including False Ceiling, False Flooring And Provision Of Furniture At Proposed 4G Nms Room At 3Rd Floor At Telephone Bhawan, Kolkata- 1 Supplying And Filling In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete. 2 Providing And Laying Cement Concrete In Retaining Walls, Return Walls, Walls ( Any Thickness ) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets, Sunken Floor, Etc., Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering And Finishing : 3 1:2:4 ( 1 Cement : 2 Coarse Sand Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) 4 Providing And Fixing Up To Floor Five Level Precast Cement Concrete String Or Lacing Courses, Copings, Bed Plates, Anchor Blocks, Plain Window Sills, Shelves, Louvers, Steps, Stair Cases, Etc. Including Hoisting And Setting In Position With Cement Mortar 1:3 ( 1 Cement : 3Coarse Sand ) , Cost Of Required Centering Complete. 5 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone Iii ) Derived From Natural Sources : 3 Graded Stone Aggregate 20Mm Nominal Size Derived From Natural Sources ) . 6 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : 7 Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) 8 Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 9 Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 ( Part I ) Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters. 10 30 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws. 11 Providing And Fixing Aluminium Die Cast Body Tubular Type Universal Hydraulic Door Closer ( Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 35 Kg And Door Width Upto 700 Mm ) , With Necessary Accessories And Screws Etc. Complete. 12 Providing And Fixing Isi Marked Aluminium Butt Hinges Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868 ) Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc. Complete: 13 100X75x4 Mm 14 Providing And Fixing Aluminium Sliding Door Bolts Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade With Nuts And Screws Etc. Complete : 15 300X16 Mm 16 Providing And Fixing Aluminium Tower Bolts Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc. Complete : 17 300X10 Mm 18 Providing And Fixing Aluminium Handles Isi Marked, Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc. Complete : 19 125 Mm 20 Providing & Fixing Decorative High Pressure Laminated Sheet Of Plain / Wood Grain In Gloss / Matt / Suede Finish With High Density Protective Surface Layer And Reverse Side Of Adhesive Bonding Quality Conforming To Is : 2046 Type S, Including Cost Of Adhesive Of Approved Quality. 21 1.0 Mm Thick. 22 Providing And Fixing Pre -Laminated Medium Density Fibre Board Exterior Grade ( Grade-I ) Is:14587:1998 Marked, To Frame, Backing Or Studding With Screws Etc. Complete ( Frames, Backing Or Studding To Be Paid Separately ) . 23 Pre-Laminated With Decorative Lamination On Both Side Exterior Grade - I Mdf Board 12 Mm Thick Confirming To Is:14587 24 Providing And Fixing Plain Lining Or In Shutter Or In Furniture / Wall Shelf With Necessary Screws / Nuts & Bolts / Nails And Fixed On Wooden / Steel Frame Work Or Aluminium Channel, Complete As Per Direction Of Engineer-In-Charge. ( Frame Work Shall Be Paid For Separately ) 25 12Mm Thick Commercial Ply Conforming To Is : 1328 Bwr Type. 26 19 Mm Thick Commercial Ply Conforming To Is : 1328 Bwr Type. 27 25 Mm Thick Commercial Ply Conforming To Is : 1328 Bwr Type. 28 Providing And Fixing Wall Shelf Or Any Other Type Of Structure By 19 Mm Commercial Ply Of Century Or Greenply Make Or Equivalent Including All Necessary Screws And Fittings As Per Design And Direction Of Engineer-In-Charge. 29 Providing And Fixing Bright Finished Chromium Plated Brass Handles Of Length 450 Mm With Screws Etc. Complete 30 Steel Work Welded In Built Up Sections / Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. 31 In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works. 32 Providing And Laying Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08%And Conforming To Is : 15622 , Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Jointing With Grey Cement Slurry @ 3.3Kg / Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. 33 Size Of Tile 600X600 Mm 34 Providing And Fixing Removable Raised / False Access Flooring With System And Its Components Of Approved Make For Different Plenum Height With Possible Height Adjustment Upto 50 Mm, Comprising Of Modular Load Bearing Floor Panels Supported On G.I. Rectangular Stinger Frame Work And G.I. Pedestal Etc. All Complete, As Per The Architectural Drawings, As Specified And As Directed By Engineer-In-Charge Consisting Of: ( A ) Providing At Required Spacing To Form Modular Framework, Pedestals Made Out Of Gi Tube Of Thickness Minimum 2 Mm And 25 Mm Outer Diameter, Fully Welded On To The G.I. Base Plate Of Size 100Mm X 100Mm X 3Mm At The Bottom Of The Pedestal Tube, G.I. Pedestal Head Of Size 75Mmx75mmx3.5 Mm Welded With Gi Fully Threaded Stud 16Mm Outer Diameter With Two Gi Check Nuts Screwed On The Stud For Level Adjustment Upto 50Mm, Locking And Stabilizing The Pedestal Head In Position At The Required Level. The Pedestals Shall Be Fixed To The Subfloor ( Base ) Through Base Plate Using Epoxy Based Adhesive Of Approved Make Or The Machine Screw With Rawl Plug. ( B ) Stringers System In All Steel Construction Hot Dipped Galvanized Of Rectangular Size 570X20x30x0.80Mm Thick Having Holes At Both Ends For Securing The Stringers On To The Pedestal Head Using Fully Threaded Screws Ensuring Maximum Lateral Stability In All Directions, The Grid Formed By The Pedestal And Stringer Assembly Shall Receive The Floor Panel, This System Shall Provide Adequate Solid, Rigid Support For Access Floor Panel, The System Shall Provide A Minimum Clear Uninterrupted Clearance Between The Bottom Of The Floor For Electrical Conduits And Wiring Etc. All Complete As Per The Architectural Drawings, As Specified And As Directed By The Engineer-In-Charge. ( C ) Providing And Fixing Access Floor Panel Of 600X600x32 Mm Medium Grade Filled Steel Anti Static High Pressure Lamination Of 800H Grade ( Fs800h ) . Access Floor Panel Shall Be Steel Welded Construction With An Enclosed Bottom Pan With Uniform Pattern Of 64 Hemispherical Cones. The Top And Bottom Plates Of Steel Gauges: Top 0.6 Mm And Bottom 0.7 Mm Fused Spot Welded Together ( Minimum 64 Welds In Each Dome And 20 Welds Along Each Flange ) . The Panel Should Be Corroresist Epoxy Coated For Lifetime Rust Protection And Cavity Formed By The Top And Bottom Plate Is Filled With Pyrogrip Noncombustible Portland Cementitious Core Mixed With Lightweight Foaming Compound. The Access Floor Shall Be Factory Finished With Anti-Static High Pressure Laminate With Non Warp Technology Upto 1Mm Thickness For Superior Adhesion And Surface Flatness Within 0.75Mm.The Panel Is To Withstand A Concentrated Load Of 363 Kgs Applied On Area 25Mm X 25Mm Without Collapse In The Centre Of The Panel Which Is Placed On Four Steel Blocks. The Panel Will Withstand And Uniformly Distributed Load ( Udl ) Minimum 1250 Kg / Sqm And An Impact Load Of 50Kg All Complete As Per The Approved Manufacturers Specification And As Per The Direction Of Engineer-In-Charge. All Specification Must Be Printed On The Side Of The Panel To Ensure The Quality Of The Product. 35 250 Mm Finished Floor Height ( Ffh ) 36 350 Mm Finished Floor Height ( Ffh ) . 37 Labour Charge For Fixing Removable Raised / False Access Floor Panel Of 600X600x32 Mm Available At Site Over Aluminium Or Wooden Framework As Per Direction Of Engineer In Charge 38 Supplying, Laying 2.00 Mm Thick Pvc Sheet In Flooring On A Smooth And Damp Proof Base Using Rubber Based Adhesives Of Approved Quality And Manufacturer Like Dunlop S-738, Fevicol Sr 998 Or Equivalent Including Rolling With Light Wooden Roller Weighing About 5 Kg. All Complete As Directed By The Engineer-In-Charge In Approved Colour And Shade. 39 Providing And Fixing Formica ( 2.00 Mm Thick ) Using Adhesive Over False Access Floor Panel Available At Site As Per Direction Of Engineer In Charge 40 12 Mm Cement Plaster Of Mix : 41 1:4 ( 1 Cement: 4 Fine Sand ) 42 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 43 1:4 ( 1 Cement: 4 Fine Sand ) 44 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : 45 Two Or More Coats On New Work. 46 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 47 Wall Painting With Premium Acrylic Emulsion Paint Of Interior Grade, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Litre. Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required To Achieve Even Shade And Colour. 48 Two Coats. 49 Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc ( Volatile Organic Compound ) Content. 50 With Ready Mixed Pink Or Grey Primer On Wood Work ( Hard And Soft Wood ) Having Voc Content Less Than 50 Grams / Litre. 51 With Water Thinnable Cement Primer On Wall Surface Having Voc Content Less Than 50 Grams / Litre. 52 Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete. 53 French Spirit Polishing : 54 One Or More Coats On Old Work. 55 Renewing Glass Panes, With Putty And Nails Wherever Necessary Including Racking Out The Old Putty: 56 Float Glass Panes Of Nominal Thickness 4 Mm ( Weight Not Less Than 10Kg / Sqm ) . 57 Easing Of Steel Windows Including Taking Out And Refixing The Same ( Where Necessary ) With New Fittings, Oiling / Greasing Etc Complete. 58 Taking Out Aluminium / Gypsum Partitions , Doors ( Including Floor Spring If Any ) , Windows, Fixed Glazing And False Celing Etc.Dismantling By Parts And Refixing In New Position After Cutting Or Adjusting Door If Necessary Including Disposal Of Unserviceable Surplus Materials And Stacking Of Servicable Materials Within 50 Mtrs Lead And Making Good All Damages Etc Complete. 59 Labour For Taking Out Existing Pvc Flooring / Carpet From The Floor / Skirting Including Removal Of Adhesive By Any Means And Making Good The Damages Etc All Complete Including Disposal Of Unserviceable Surplus Materials And Stacking Of Servicable Materials Within Any Lead And Lift As Per Direction Of Engineer-In -Charge. 60 Erection Of Single Layer Bamboo-Scaffolding Made Of Average 75 Mm Dia Bamboos With Adequate Bracing, Ties, Ropes Etc. For Strong, Stable And Workable Scaffolding For Specified Jobs ( Above Gf Beyound 4.00M Height ) Like Replacement Of Sewage / Rw Pipes & Accessories, Repairs To Plasters, R.C.C Fins, Replacement Of Glass Panes, Uprooting / Cutting Of Tree Saplings Etc Including Dismantling The Scaffolding After The Job Is Done And Clearing The Site Complete As Per The Direction Of The Engineer-In-Charge. [ Projected Area Of Scaffolding Frame Work On Buiding Elevation To Be Measured For Payment ] 61 Providing And Fixing Black Reflective Sun Control Films On Glass Panes As Per Direction Of Engineer In Charge. 62 Demolishing Cement Concrete Manually / By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In - Charge. 63 Nominal Concrete 1:3:6 Or Richer Mix ( I / C Equivalent Design Mix ) 64 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge.. 65 In Cement Mortar 66 Dismantling Doors, Windows And Clerestory Windows ( Steel Or Wood ) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : 67 Of Area Beyond 3 Sq. Metres 68 Dismantling Steel Work In Built Up Sections In Angles, Tees, Flats And Channels Including All Gusset Plates, Bolts, Nuts, Cutting Rivets, Welding Etc. Including Dismembering And Stacking Within 50 Metres Lead. 69 Dismantling Aluminium / Gypsum Partitions, Doors, Windows, Fixed Glazing And False Ceiling Including Disposal Of Unserviceable Material And Stacking Of Serviceable Material With In 50 Meters Lead As Directed By Engineer-In-Charge. 70 Credit Value For Dismantled Unserviceable Materials 71 Reinforcement / Steel Materials 72 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fasteners To Be Paid For Separately ) : 73 For Fixed Portion -Anodised Aluminium ( Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15 ) 74 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required ( Fittings Shall Be Paid For Separately ) . -Anodised Aluminium ( Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15 ) 75 Providing And Fixing 12Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is:12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer-In-Charge. 76 Pre-Laminated Particle Board With Decorative Lamination On Both Sides. 77 Providing And Fixing Powder Coated Aluminium Work ( Minimum Thickness Of Powder Coating 50 Micron ) Consisting Of Tee / Angle Sections, Of Approved Make Conforming To Is : 733 In Frames Of False Ceiling Including Aluminium Angle Cleats With Necessary C.P. Brass / Stainless Steel Sunk Screws, Aluminium Perimeter Angles Fixed To Wall With Stainless Steel Rawl Plugs @ 450 Mm Centre To Centre And Fixing The Frame Work To G.I. Level Adjusting Hangers 6 Mm Dia. With Necessary Cadmium Plated Machine Screws All Complete As Per Approved Architectural Drawings And Direction Of The Engineer-In-Charge ( Level Adjusting Hangers, Ceiling Cleats And Expansion Hold Fasteners To Be Paid For Separately ) . 78 Providing And Fixing Brass 100Mm Mortice Latch And Lock With 6 Levers Without Pair Of Handles ( Best Make Of Approved Quality ) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete. 79 Providing And Fixing False Ceiling At All Heights With Integral Densified Calcium Silicate Reinforced With Fibre And Natural Filler False Ceiling Tiles Of Size 595X595 Mm Of Approved Texture, Design And Patterns Having Nrc ( Noise Reduction Coefficient ) Of 0.50 ( Minimum ) As Per Is 8225:1987, Light Reflectance Of 85% ( Minimum ) . Non Combustible As Per Bs:476 ( Part-4 ) , Fire Performance As Per Bs:476 ( Part 6 &7 ) , Humidity Resistance Of 100%, Thermal Conductivity < 0.043 W / M K As Per Astm 518:1991, In True Horizontal Level Suspended On Interlocking Metal Powder Coated T-Grid Of Hot Dipped Galvanised Iron Section Of 0.40 Mm Thick On Silhouette Profile, Rotary Stiched Double Webbed White With 6Mm Reveal Profile ( White / Black ) , Comprising Of Main-T Runners Of Size 15X42mm Of Length 3000 Mm, Cross - T Of Size 15X42 Mm Of Length 1200 Mm And Secondary Intermediate Cross- T Of Size 15X42 Mm Of Length 600Mm To Form Grid Module Of Size 600 X 600 Mm, Suspended From Ceiling Using Galvanised Mild Steel Items ( Galvanizing @ 80 Grams Per Sqm ) I.E. 50 Mm Long, 8 Mm Outer Diameter M-6 Dash Fasteners, 6 Mm Dia Fully Threaded Hanger Rod Upto 1000 Mm Length And L-Shape Level Adjuster Of Size 85X25x2 Mm. Galvanised Iron Perimeter Wall Angle Of Size 22X19x0.40 Mm Of Length 3000 Mm To Be Fixed On Periphery Wall / Partition With The Help Of Plastic Rawl Plugs At 450 Mm Center To Center And 40Mm Long Dry Wall S.S Screws. The Work Shall Be Carried Out As Per Specifications, Drawing And As Per Directions Of The Engineer-In-Charge. 80 With 15 Mm Thick Integral Densified Micro Edge Light Weight Calcium Silicate False Ceiling Tiles 81 Supply Installation And Configuration Of Face And Rfid Card Support Biometric Access System For Aluminium Door Comprising Of Electronic Magnetic One Side Door Lock And Other Side Touch Exit Switch With Necessary Software With License, Power Adapter And Other Fittings As Per Direction Of Engineer In Charge. ( Electric Power Board And Lan Cable With Internet Connection Requied At Device End Will Be Provided ) . 82 Providing And Fixing Accoustical Wall Paneling Wood Perforated Slates Of M / S Decible / Armstrong Or Euiqvalent Of Size 2430Mmx128mmx16mm Thick Upto 4500Mm Height Made Up Of Hdmr Board With Laminated Facing Of Approved Shade And Balancing Melamine Finish On Rear Side. The Board Shall Have Fluted Perforation Of 2Mm Width @ 28Mm Centre Fixed On Aluminium Tube. The Gap Between Board And Wall To Be Filled Up With 50Mm Thick Rock Wool Etc Complete Including All Accessories, Material And Labour Complete As Directed By Architect And Engineer In Charge. 83 Providing And Fixing Accoustical Wall Paneling Of M / S Decible / Armstrong Or Euiqvalent, With Square Edges Upto 4500Mm Height Made Up Of Fibre Glass Substrate 20Mm Thick, Wrapped On Front Side With Accoustical And Fire Resistant Fabric With Approved Colour, The Size Of Panel Shall Be 1200X600mm With Nrc Of 0.90. The Panel To Be Pasted With Wall Panel Hooks On Grid Of Size 600X600mm, Made Up Of Plywood Of 9Mm Thick And 75Mm Wide Strips. The Gap Between Board And Wall To Be Filled Up With 50Mm Thick Rock Wool Etc Complete Including All Accessories, Material And Labour Complete As Directed By Architect And Engineer In Charge. 84 Providing An Fixing 9Mm Thick Plywood Battern Of Width 75Mm Finished With 3Mm Thick Teak Veneer Fixed To With Screws And Melamine Polish Etc Complete As Directed By Engineer In Charge 85 Providing And Fixing Desk Based Modular Workstations Of M / S Godrej, Model Upbeat Or Equivalent As Detailed : UpbeatDesk Based Modular Workstation With System Ht - 1050 Mm. Partial Screens: Fabric T- Mould, 19Mm Thk Screen Of 300Mm Ht., Mounted On Studs. Clip On Screen: Frosted Acrylic Screen ( 8Mm Thick ) Of 300Mm Ht. Removable Screen And Shall Be Used As Divider Screen. It Shall Have A Die Cast Fixing Clamp To Enable Mounting Of The Screens To The Worktop Legs: Providing Metal Powder Coated Cube Leg. Legs Are For Standard Workstation Height Of 750Mm. Understructure: Comprising Of Metal Powder Coated Cross Connectors Between Legs And Legs. Made Up Of Metal Powder Coated Finish And The Entire Assemply Shall Be Fixed To The Worktop.Wire Management: For 750 High Workstations- For Vertical Wire Management, Shared Legs / Wire Risers With Cover Shall Be Provided. For Horizontal Wire Management - Wire Tray With Integrated Power Box . Access Flap Shall Be Provided. Switch Plate Of ( 8+3 Anchor Roma ) Module Shall Be Provided For Power And Data Points. Work Surface - Shall Be Cut Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Required Size. Modesty : Metal Modesty: Shall Be Lazer Cut Perforated Metal Modesty Metal And Wooden Modesty, Mounted On The Worktop With The Help Of The Modesty Mounting Brackets Modesty Terminates At 400 Mm From Ground. The Rate Includes Transportation, Loading, Unloading And Erection At 4Th Floor. 86 Upbeat Recta Workstations Of Size 900 / 1050 ( L ) X600 ( W ) X1050 ( H ) Mm 87 Providing And Placing In Position Medium Back Revolving Chair Of M / S Godrej, Model: Versa Neo With Spacer Fabric, Adjustable Seat & Back Height, Adjustable Pu Arms, Active Bio-Synchro Mechanism With 5 Position Tilt Limiter, Nylon Pedestal Etc Complete As Directed. ( The Rate Includes Transportation, Loading, Unloading And Erection At 4Th Floor. ) 88 Providing And Fixing In Position Powder Coated Steel Key Board Pull Out Tray. ( The Rate Includes Transportation, Loading, Unloading And Erection At 4Th Floor. ) 89 Providing And Fixing In Position Powder Coated Steel Cpu Trolley With Castor Wheels ( The Rate Includes Transportation, Loading, Unloading And Erection At 4Th Floor. ) 90 Providing And Fixing Storage Credenza Of Size 1750X850x850 As Per Approved Drawing Made Up Of 18Mm Thick Bwp Grade Plywood 18Mm, 1Mm Thick Decorative Lamination On All Exposed External Surfaces And 1Mm Thick Balancing Lamination Of White Colour On All Remaining Surfaces, Shutters To Be Provided With Powder Coated Steel Fixed Louvered Sections After Cutting In Plywood, Brass Butt Hinges Of Size 50X40x2.5Mm, Brass Cupborad Lock Of Size 40Mm And Brass Cupboard Knobs Etc Etc Complete As Per The Drawing And Directions Of Engineer In Charge. ( The Rate Includes Transportation, Loading, Unloading And Erection At 4Th Floor. ) 91 Providing And Placing In Position Godrej Or Equivalent Make Oxbo Visitors Chair:Spe: Seat Assembly: The Seat Assembly Should Be Made Up Of 1.2±0.1Cm. Thick Hot-Pressedplywood , Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam.Seat Size: 47.0 Cm. ( W ) X 48.0 Cm. ( D ) 2.Back Assembly: The Back Asembly. Should Be Made Of Powder Coated ( Oft 40-60 Microns ) Tubular Frame Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Should Be Upholstered Using Double Layer Spacer Mesh Fabric With High Tenacity Yarn.Back Size : 46.5 Cm. ( W ) X 60.5Cm. ( H ) 3.High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Be Moulded With Density =45+ / -2 Kg / M3 And Hardness Load 16 ± 2 Kgf For 25% Compression.4.Armrests: The One-Piece Armrests Should Be Injection Moulded From Black Co-Polymer Polypropylene.5.Tubular Frame: The Powder Coated ( Dft 40-60.Microns ) Tubular Frame Should Be Cantilever Type & Made Of Ø2.54 ±0.03Cm. X 0.2 ±0.016Cm Thick M.S.E.R.W. Tube.Moulded From Black Co-Polymer Polypropylene.5.Tubular Frame: The Powder Coated ( Dft 40-60.Microns ) Tubular Frame Should Be Cantilever Type & Made Of Ø2.54 ±0.03Cm. X 0.2 ±0.016Cm Thick M.S.E.R.W. Tube.
