Visakhapatnam Port Trust has published Tender For Miscellaneous Engineering Works Of Zone A For A Period Of 2 Years. Submission Date for this Tender is 27-04-2024. Civil Work Tenders in Visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation Soft/Loose soil over areas (exceeding 30 cm. in depth 1.5m. in width as well as 10 sq.m. on plan) including disposal of excavated earth lead up to 50 m. and lift up to 1.5m disposed earth to be levelled and neatly dressed etc., as required and as directed by the Engineer-in-charge complete. |
| 2 | Earth work in excavation hard/densesoil over areas (exceeding 30 cm. in depth 1.5m. in width as well as 10 sq.m. on plan) including disposal of excavated earth lead up to 50 m. and lift up to 1.5m disposed earth to be levelled and neatly dressed etc., as required and as directed by the Engineer-in-charge complete. |
| 3 | Surface dressing of the ground in soft/loose soils including removing vegetation andinequalities not exceeding 15 cm. deep and disposal of rubbish lead up to 50 m. and lift up to 1.5m. etc., as required and as directed by the Engineer-in-charge complete. |
| 4 | Surface dressing of the ground in hardsoils including removing vegetation andinequalities not exceeding 15 cm. deep and disposal of rubbish lead up to 50 m. and lift up to 1.5m. etc., as required and as directed by the Engineer-in-charge complete. |
| 5 | Filling with available excavated earth (excluding rock) in trenches, plinth sides of foundations etc., in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m. and lift up to 1.5m.etc., as required and as directed by the Engineer-in-charge complete. |
| 6 | Supplying and filling in plinth with sand under floors including watering, ramming, consolidating and dressing etc., as required and as directed by the Engineer-in-charge complete. All labour and materials. |
| 7 | Shoring and strutting for foundations/pipe line trenches single staging up to 2.5m. etc., as required and as directed by the Engineer-in-charge complete. All labour and materials. |
| 8 | Earthwork in excavation Soft/Loose soil in foundation trenches or drains not exceeding 1.5m. in width and for wells, man holes and the like not exceeding 10 sq.m. on plan including dressing of sides and ramming of bottoms, lift up to 1.5m. Including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50Mtrs etc., as required and as directed by the Engineer-in-charge complete. |
| 9 | Earthwork in excavation hard/densesoil in foundation trenches or drains not exceeding 1.5m. in width and for wells, man holes and the like not exceeding 10 sq.m. on plan including dressing of sides and ramming of bottoms, lift up to 1.5m. Including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50Mtrs etc., as required and as directed by the Engineer-in-charge complete. |
| 10 | Bailing out water from foundations/pipe line trenches with oil Engine Driven pump sets including hire charges, fuel charges and wages for the driver and helperetc., as required and as directed by the Engineer-in-charge complete. All Hire and Operational charges. |
| 11 | Turfing slopes including watering for 3 months with initial lead for conveyance of water and grass for one Hecto Metre etc.,as required and as directed by the Engineer-in-charge complete. All labour and materials. |
| 12 | Earth work Soft/Loose soil in surface excavation not exceeding 30 cm. in depth but exceeding 1.5m. in width as well as 10 sq.m. on plan including disposal of excavated earth up to 50 m. lead and lift up to 1.5m. disposed soil to be levelled and neatly dressed etc. as required and as directed by the Engineer-in-charge complete. |
| 13 | Earth work hard /dense soils in surface excavation not exceeding 30 cm. in depth but exceeding 1.5m. in width as well as 10 sq.m. on plan including disposal of excavated earth up to 50 m. lead and lift up to 1.5m. disposed soil to be levelled and neatly dressed etc., as requiredand as directed by the Engineer-in-Charge complete. |
| 14 | Cutting and uprooting bushes / thorny bushes over 15 cm. and upto 75 cm. girth and disposed at the place shown by the Engineer-in-charge within a lead of 1km.etc., as required and as directed by the Engineer-in-Charge complete. |
| 15 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm. measured at a height of 1 M above ground level and removal of rubbish up to a distance of 50 m. outside the periphery of the area cleared, etc., as required and as directed by the Engineer-in-Charge complete. |
| 16 | Plain cement concrete 1:3:6 nominal mix (using 220 kg of cement per m3 of finished concrete) using 40 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, tamping, finishing, curing etc., as required and as directed by the Engineer-in-charge complete. All labour and materials. |
| 17 | Plain cement concrete 1:4:8 nominal mix (using 170 kg of cement per m3 of finished concrete) using 40 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, tamping, finishing, curing etc., as required and as directed by the Engineer-in-charge complete.All labour and materials. |
| 18 | Plain cement concrete M-20 mix using 20 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position tamping or vibrating, finishing, curing etc., including necessary form work (boxing etc.,) etc., as required and as directed by the Engineer-in-charge complete. All labour and materials. |
| 19 | Plain cement concreteM-20 mix using 20 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position vibrating or tamping, finishing, curing etc., as required and as directed by the Engineer-in-charge complete.All labour and materials |
| 20 | Plain Cement Concrete 1:3:6 nominal mix (using 220 Kg. of cement per m3 of finished concrete) using 20 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, vibrating or tamping, finishing, curing etc., including form work (boxing) in bed blocks, plinth courses and similar types of works etc., as required and as directed by the Engineer-in-charge complete. All labour and materials. |
| 21 | Plain Cement Concrete 1:3:6 nominal mix (using 220 Kg. of cement per m3 of finished concrete) using 20 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, tamping or vibrating, finishing, curing etc., as required and as directed by the Engineer-in-charge complete. All labour and materials. |
| 22 | Plain Cement Concrete M-20 mix using 20 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position tamping or vibrating finishing, curing etc., in encasing rail posts and structural steel members, staircase steps, copings or similar type of works including boxing etc.,as required and as directed by the engineer in charge complete. All labour and materials. |
| 23 | RCC M 30 mix in all types of beams, lintels, columns, square, Circulars or rectangular etc., using 20 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, vibrating, finishing, curing, cost of superplasticizer etc., including necessary shuttering as required, complete. All labour and materials but excluding cost of reinforcement. |
| 24 | RCC M 30 mix in column footings, strip footings, raft foundations, plinth beams, bed blocks, cellular raft, plinth courses and similar types of works etc., using 20 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, tamping and or vibrating, finishing, curing, form work, cost of superplasticizer etc., as required and as directed by the EIC complete all labour and material but excluding cost of reinforcement. |
| 25 | RCC M-30 mix in roof slabs, landing slabs, staircase slabs, culvert slabs and similar type of slabs etc., using 20 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, vibrating, finishing, curing, cost of super plasticizer etc., including necessary shuttering as required and as directed by the engineer in charge complete. All labour and materials but excluding cost of reinforcement. |
| 26 | Plain Cement Concrete M-30 mix using 20 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, tamping or vibrating, finishing, curing etc., including necessary form work (boxing etc., as required and complete. All labour and materials. |
| 27 | Plain Cement Concrete M 20 mix using 12 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing depositing in position, tamping or vibrating, finishing, curing etc., as required and as directed by the EIC. Complete.All labour and materials. |
| 28 | Repair grouting 20 cm. depth to aprons and revetment with CC 1:3:6 nominal mix (using a Min. 220 Kg. of cement per m3 of finished concrete) using 20 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing depositing in position, tamping, finishing, curing and pointing with CM 1:3 etc., as required and as directed by the EIC complete. All labour and materials. |
| 29 | RCC M-20 mix in precast jalley work of 50mm thick using 6mm passing through 10mm sieve and retained on 2.36mm sieve) granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, tamping, finishing, curing, cost of super plasticizer etc., necessary shuttering as required and as directed by the EIC complete. All L&M but excluding cost of reinforcement. |
| 30 | RCC M-20 mix in precast slabs, fencing posts etc., using 20mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, tamping, finishing, curing, cost of super plasticizer etc., including necessary boxing as required, lifting and placing in position etc., as required and as directed by EIC complete. All labour and materials, but excluding cost of reinforcement. |
| 31 | RCC M-20 mix in chajjas, fins etc., of average thickness 80 mm including drip moulded cornices using 20 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, tamping finishing, curing, necessary shuttering cost of super plasticizer etc., as required and as directed by the engineer in charge complete. All labour and materials but excluding cost of reinforcement. |
| 32 | RCC M-30 for pre-cast units using 20 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, tamping, finishing, curing cost of super plasticizer etc., including necessary boxing as required, transportation to any where in Port area by lorry or other means up to and including 5 KM. lead handling, loading, unloading by Mechanical means (i.e. by crane) lifting and placing in position etc., as required and as directed by the engineer in charge complete. All labour and materials but excluding cost of reinforcement. |
| 33 | Reinforced cement concrete M20 mix in all types of beams, lintles, columns square or circular or rectangler etc., using 20 mm. graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing depositing in position, vibrating, finishing, curing cost of super platicizer etc., including necessary shuttering as required and as directed by the Engineer-in-charge complete. Al labour and materials but excluding cost of reinforcement. |
| 34 | Supplying, placing and maintaining in position Ribbed Tor Steel or Mild Steel reinforcing bars varying from 6 mm. to 40 mm. dia including straightening, cutting, bending, tying grills with annealed steel binding wire of 18 gauge (1.22 mm. dia) including cost of binding wire, transportation to site etc., as required and as directed by the Engineer-in-charge, complete.All labour and materials. |
| 35 | Providing brick work in C.M. 1:5 in superstructure using approved quality standard bricks of Class Designation 35 including, scaffolding lift, curing etc., as required and as directed by the EIC complete. All labour and materials. |
| 36 | Providing random rubble masonry in CM 1:5 in plinth and foundations including necessary dressed stones at corners and junctions, curing etc, as required and as directed by the EIC complete.All labour and materials. |
| 37 | Extra lift of 3 Mtrs for brick or stone masonry work over an initial lift of 3Mtrs etc., as required and as directed by the EIC complete. All labour and materials.First Floor. |
| 38 | Extra lift for Brick or stonework for second floor level etc. as required and as directed by the EIC complete. All labour and materials. |
| 39 | Providing brick work in CM 1:4 in super structure using approved quality standard bricks of Class Designation 35 including scaffolding, lift, curing etc., as required and as directed by the EIC complete. All Labour & Materials. |
| 40 | Providing half brick masonry in CM 1:4 in superstructure using approved quality standard bricks of Class Designation 35 including scaffolding, lift, curing etc., as required and as directed by the engineer in charge complete. All Labour&Materials |
| 41 | Providing rough stone dry packing including filling and wedging with spalls for aprons and revetments etc., as required and as directed by the EIC complete. Alllabour and materials. |
| 42 | Providing Random Ruble masonry in CM 1:5 in superstructure including necessary dressed stones at corners and junctions, jambs and sills of doors, windows etc., scaffolding, lift, curing etc., as required and as directed by the EIC complete. All labour and materials. |
| 43 | Supplying and fixing ACC sheets in roofing or walling as per IS including necessary G.I hook bolts as per I.S 730 G.I Nuts G.I Bitumen washers etc., as required and as directed complete. All L&M but excluding supplying and fixing ridges. |
| 44 | Supplying and fixing AC two pieces close fitting adjustable ridges for ACC sheet roofing as per I.S including necessary G.I hook bolts as per I.S 730, G.I Nuts, G.I and Bitumen washers etc. as required and as directed by the engineer in charge complete. All labour and materials. |
| 45 | Supply of AC ridges two pieces close fitting adjustable for corrugated sheets at site of work etc., as required and as directed by the EIC complete. All labour and materials. |
| 46 | Supply of AC Plain sheets 6 mm thick at site of work etc., as required and as directed by the EIC complete. All labour and materials |
| 47 | Supplying and fixing Pre-Painted galvalume trapezoidal profile roofing / walling sheets of approved make with 0.5mm thickness, coating aluzinc coating AZ 150gsm, tensel strenth: 550Mpa paint coating: Regular modified polyster painting, painting thickness: (Top) 18 to 20 microns, bottom 5 to 7 microns, with regular range colours in roofing or wallingincluding hooks, bolts, nuts, washers and screws etc.,as required and as directed by the engineer in charge complete.All labour and materials but excluding cost of ridge pieces. |
| 48 | Supplying and fixing AC plain sheets 6 mm thick for ceiling, walls etc., including cutting cost of screws, washers etc., as required and as directed by the EIC complete. All L&M but excluding cost of framework. |
| 49 | Supplying and fixing expanded polystyrene (thermo Coal) ceiling 25 mm thick complete. All L&M etc., as required and as directed by the EIC but excluding wood or metal frame work. |
| 50 | Supplying and fixing fibre glass reinforced polyester transluscent corrugated sheets of 1.5 mm thick in walling or roofing including necessary G.I Hook Bolts, G.I Nuts and washers bitumen washers etc.,as required and as directed by the EIC complete. All L&M. |
| 51 | Supplying and providing water proofing treatment with polymeric water proofing membrane of 1.75 KG/M2 (Plastifelt 2104 of five layers inclusive of all layers 2 + 0.2 mm thick manufactured by M/s. Plastifelt India, Calcutta or approved equivalent) after cleaning the surface with wire brush and priming the surface with roof primer (base bitumen 20/30 having low filler content, specific gravity of 1.04) fixing plastifelt 2104 having thickness of 2+0.2mm using hot blown bitumen of thickness 1 mm to 1.5mm of 85/25 grade and providing 7.5 cm overlaps, topping with cement screed of 20mm thickness in CM 1:4 ratio with wire mesh of 26 SWG etc., as required and as directed by the EIC complete. All labour and materials. |
| 52 | Providing special repairs to the ceiling of roof slab with anti corrosive coating Nito zinc epoxy primer or equivalent to the exposed reinforcement 1 Kg / 6Sq.mtrs. and application of bonding agent Nitobond EP or equivalent for bonding the existing cementitious surface at 1 Kg/2-3 Sq.M, and filling the patches with polymer mortar Nitobond AR or equivalent mixed with CM 1:3 at 10 Ltrs/50Kg. Cement after that chemical curing with concure WB or equivalent @ 1 Ltr to area of 5 Sq.M. including necessary scaffolding cleaning exposed reinforcement area etc., as required as directed by the EIC complete. All L&M. |
| 53 | Providing water proofing treatment on roof slabs with cement mortar 1:3, 12 mm thick over a layer of 38 mm thick cement concrete 1:2:4 nominal mix (using 320 Kg. of cement per m3 of finished concrete) using 6 mm (passing through 10 mm sieve and retained on 2.36mm sieve) granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, tamping, finishing, curing etc., including supplying, embedding chicken mesh of 18 gauge as reinforcement in concrete etc., as required and as directed by the engineer in charge complete. All labour and materials. |
| 54 | Supplying and fixing sal or maddi wood wrought and put up in beams, joists etc., as required and as directed by the EIC complete. All labour and materials. |
| 55 | Supplying of sal or kamba wood planks of all sizes at site of work etc., as required and as directed by the Engineer in charge complete. All labour and materials. |
| 56 | Supplying and fixing sal or maddi wood frame work for doors, windows ventilators, etc as per I.S. 4021/1983 or of approved make including two coats of coal tar on wall sides etc., as required and as directed by the Engineer in charge complete. All labour and materials |
| 57 | Supplying and fixing sal wood 30 mm thick fully panelled (16 mm thick panel) window shutters as per I.S. 1003 (Pt.II) or of approved make including necessary oxidised iron fittings such as but hinges, tower bolts, hooks and eyes, handles, nettle fold screws etc., as required and as directed by the EIC complete all labour and materials. But excluding frame work. |
| 58 | Supplying and fixing half door shutters fully panelled with approved teak wood styles and rails of 75x20mm size and 6mm thick both side teak veneered ply wood panels, including necessary approved oxidised iron double acting spring hinges and blank hinges etc., as required and as directed by the EIC,Complete. All L&M. |
| 59 | Supplying and fixing hold fasts with M.S. flats 40 x 5 mm size 200mm. long to doors windows, ventilators, etc., as per I.S. 7196 with holes necessary screws, bitumen finishing etc., as required and as directed by the engineer in charge complete. All labour and materials |
| 60 | Supplying and fixing MS bars including MS flats at required spacing in wooden frames of Windows, Ventilators etc., as required and as directed by the Engineer in charge, complete.All labour and materials. |
| 61 | Supplying and fixing welded steel wire mesh of size 75x25 mm and dia of wire 5 mm x 3.15 mm etc., as required and as directed by engineer in charge complete. All labour and materials (Excluding frame work) |
| 62 | Supplying and fixing 2/3 weld mesh of 75 x 25 mm size with 5 mm x 3.15 mm dia wire and 1/3 panelled sal wood double leaf door shutters internal or external 35 mm thick as per I.S. 1003 (Part-I) or of approved make including necessary approved oxidised iron fitting such as but hinges, tower bolts, handles, aldrops, door latches, locking arrangements nettle fold screws, bolts, wooden stoppers etc., as per standards and as required and as directed by the EIC complete all labour and materials but excluding frame work. |
| 63 | Shelves and planks of sal or maddi wood including necessary brackets of wood and fixing to wall etc., as required and as directed by engineer in charge complete. All labour and materials |
| 64 | Supplying and fixing factory made flush door shutters both sides decorative teak veneered double leaf 35 mm. thick as per IS 2202 Part-I solid black board core and plywood face panels, including necessary approved anodized aluminum fittings such as tower bolts, aldrops, handles, door latches locking arrangements, wooden stoppers, oxidized iron butt hinges, nettle fold screws, bolts etc., as per standards and as required and as directed by the Engineer-in-charge complete. All labour and material but excluding frame work. |
| 65 | Supplying and fixing factory made flush door shutters both sides decorative teak veneered single leaf 35 mm. Thick as per I.S. 2202 Pt.I solid black board core and plywood face panels including necessary approved anodized aluminum fittings such as tower bolts, aldrops, handles, door latches locking arrangements, wooden stoppers, oxidized iron but hinges nettle fold screws, bolts, etc., as per standards etc., as required and as directed by the EIC complete, all labour and material. But excluding frame work. |
| 66 | Supplying and fixing fully paneledSal wood double leaf door shuttersexternalorinternal 35 mm thick as per I.S 1003 (part-I) or of approved make including necessary approved oxidized iron fittings such as butt hinges, tower bolts handles, aldrops, door latches, locking arrangements, nettle fold screws, bolts, wooden stoppers etc., as per standards and as required and as directed by the engineer in charge complete. All labour and materials. But excluding frame work. |
| 67 | Supplying fixing fully paneled Sal wood single leaf door shutters external or internal 35 mm thick as per I.S 1003 (Part-I) or of approved make including necessary approved oxidized iron fitting such butt hinges, tower bolts, handles, aldrops, locking arrangements door latches, stopper, nettle fold screws, bolts, wooden stoppers etc., as per standards and as required and as directed by the Engineer-in-charge, complete. All labour and materials. But excluding frame work. |
| 68 | Supplying and fixing Salwood fully panelled cup board shutters of approved make styles and rails of 100x25 mm. size and 16 mm. thick panels including necessary anodised aluminium fittings such as tower bolts, handles hooks and eyes hasps and staples oxidized iron butt hinges, nettle fold screws etc., as required and as direted by th e engineer in charge complete. All labour and materials but excluding frame work. . |
| 69 | Supplying and fixing glass panes of 3mm thick plain glass in steel windows, ventilators, glazed partitions, etc. including polishing after fixing, etc., as required and as directed by Engineer-in-charge complete. All labour and materials, including cost of putty or wooden fillets or clips as required (1st and 2nd floors) |
| 70 | Supplying fixing in position 3mm thick plain or colour acrylic sheet panel in steel windows, ventilators, glazed partitions including polishing after fixing etc., and as required and as directed by the EIC complete. All labour and materials including cost of putty or wooden fillets or clips as required in (1st and 2nd floors) |
| 71 | Supplying and fixing 3 mm thick pin head glass panes of approved quality in steel windows, ventilators glazed partitions etc., in G.F. including polishing after fixing etc., as required and as directed by the engineer in charge complete. All labour and materials. Including cost of Putty or wooden fillets or clips as required. |
| 72 | Supplying and fixing 5.5 mm thick plain glass in steel windows, ventilators, glazed partitions etc., in G.F. including polishing after fixing etc., complete. All labour and materials including cost of putty or wooden fillet or clips as required and as directed by the engineer in charge complete. |
| 73 | Supplying and fixing 4.00mm thick plain glass in steel windows, ventilators, glazed partitions etc., in G.F. including polishing after fixing etc., complete. All labour and materials including cost of putty or wooden fillet or clips as required and as directed by the engineer in charge complete. |
| 74 | Supplying and fixing nylon fly proof mesh to doors, windows, cupboards etc., including fixing etc., as required and as directed by the engineer in charge complete. All labour and materials. But excluding frame work. |
| 75 | Supplying and fixing pelmets 150 mm wide to doors, windows including teak wood frame with one layer of 6 mm thick teak veneered plywood, 20 mm dia aluminum pipe including necessary fittings, varnishing two coats etc., frame consisting reepers of 20 x 20 mm, and side planks of 150x120 (Avg) x 20mm. etc., as required and as directed by the EIC complete. All labour and materials. |
| 76 | Supplying and fixing godrej or equivalent make 6 levers 75 mm size mortice lock with handles etc., as required and as directed by the Engineer-in-charge complete. All labour and materials. |
| 77 | Supplying and fixing 3 mm thick commercial ply wood board of required size and shape with approved glues, nails, screws etc., as required and as directed by the Engineer - in - charge complete. All L&M, but excluding framework. |
| 78 | Supplying of 3 mm thick plain glass panes of required size at site of work etc., as required and as directed by the EIC complete. All labour and materials. |
| 79 | Supplying of plain glass panes 5.5 mm thick at site of work etc.,as required and as directed by the EIC complete.All labour and materials. |
| 80 | Supplying and fixing sun control film of approved colour and shade. For Glass doors, windows of different elevations including cost of such control film, transportation to site of work. All leads and lifts as required and as directed by the EIC, complete. All labour and materials. |
| 81 | Supply of Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979 - PVC Coated - 3"x3" (76 mm x 76 mm) - 8 Gauge at site of work etc., as required and as directed by the EIC complete. All labour and materials. |
| 82 | Providing and fixing Cast Iron Body Bottle Type Hydraulic Door Closer (IS: 3564) with double speed adjustment, with necessary accessories and screws etc. as required and as directed by the engineer in charge complete. All labour and materials. |
| 83 | Providing and fixing Aluminium Extruded Section Body Tubular Type Hydraulic Door Closer (IS: 3564) with double speed adjustment with necessary accessories and screws etc. as required and as directed by the engineer in charge complete (Type-3: for width of doors 851 to 1000 mm). All labour and materials. |
| 84 | Supplying and fixing PVC Windows(Wintech-UPVC profiles)basement window with two shutter opening with duly fabrication to suit to the required size including plain glass of 6mm thick installation and if any gaps between masonary and frame should be sealed with synthetic adhesives etc., as required and as directed by the Engineer-in-charge complete.All labour and materials. |
| 85 | Providing and fixing factory made uPVC white colour casement/Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to Upvc profile),uPVC extruded glazing beads of appropriate dimension,EPDMgasket,zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point lockinghavingtransmission gear, cylinder with keeps and one side key, G.Ifasteners100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut andfusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealent . Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.-Casement door with 3D hinges made of (big series) frame 67x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). etc., as required and as directed by the Engineer-in-charge complete.All labour and materials. |
| 86 | Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of doorupto 2.50 sqm), etc., as required and as directed by the Engineer-in-charge complete.All labour and materials. |
| 87 | Providing and fixing factory made uPVC white colour sliding glazed doorcomprising of uPVC multi- chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy(white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (ifrequired), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steelscrews etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes,wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made, etc., as required and as directed by the Engineer-in-charge complete.All labour and materials. |
| 88 | Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thicknessof 2.3 ± 0.2 mm and single glazing bead / double glazingbead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) |
| 89 | Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of(big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) |
| 90 | Providing and fixing of factory made of High Density High MoistureResistant Wood Fibre (HDHMR) single shutter Duradoor made up of FRAME: Door frame manufactured with High Density High MoistureResistant Wood Fibre (HDHMR) of 36mm width x 100mm depth , laminated with 0.2mm thick PVC Foil using hot press andPUR adhesive, fitted with Gasket for energy efficiency and noise protection,affixed to the wall using high strength expandable PU Foam/ self-expandable wall fixing screws.Max dimensions in MM of 280 (depth) x 2440 (height)SHUTTER: Factory made 41mm thick shutter sandwiched with High Density High Moisture ResistantWood Fibre (HDHMR) of 5.5mm thick skinson both sides and HDHMR of 30mm thickness as skeleton,core of high density Honey Comb and Laminated Veneer Lumber (LVL) for holding the lock body andhardware, laminated with 0.2mm thick PVC Foil and edge-banded with 1mm thick PVCedge-band using hot press and PUR adhesives. Max dimensions in MM of 1200 (width) x 41(thickness) x 2400 (height), ARCHITRAVE: Factory made Architrave of size 80mm x 12mm fitted to pre-made grooves within the frame for addedaesthetics. Four design variants available, made with Density High Moisture Resistant Wood Fibre(HDHMR) of different thicknesses depending on the design variant, laminated with 0.2mm thickPVC Foil using hot press and PUR adhesive, fitted to the wall using strong quick actingadhesives. HARDWARE & ACCESSORIES: Imported hardware including door handles – 1 no, cylindrical magnetic lock -1 no ,SS hinges – 3 nos. Including cost and conveyance of all material, Hardware, Labour charges and transportation complete for finished item of work |
| 91 | Supply and fixing of Bath/Toilet Door frame and shutter with 8mm laminated (IS.15786)using with 50mmx35mmx1.3mmthick aluminum door frame of weight 220grm per Rft with a rebate of 30 mm for provision for shutter , shutter made with 45mmx25mmx1.3mm thick aluminum section of weight 210grms per Rft with 8mm groove to accommodate 8mm thick laminated (IS.15786) and shutter having 3nos of ss 304gr Butt hinges of 100mm long, 100mm aluminum handles -2nos, and also 2 nos of 200mmx12mm aluminum aldrops ,the rates inclusive of all labor fixing at site and 50microns Ivory powder coated for aluminum door frame and shutter sections etc., as required and as directed by the engineer in charge complete finished item of work . |
| 92 | Supplying and fixing Sintex / Nandi or equivalent product PVC framework for doors etc., made out of multi chamber hallow PVC Section (40 x 57 mm) with EPDM gasket and GI reinforcement. The corner shall be made metre cut and welded or joined with necessary fixtures etc., as required and as directed by the EIC complete. All labour and materials. |
| 93 | Supplying and fixing Sintex, Nandi or Equivalent PVC door shutters single leaf comprising styles and rails made of Sintex, Nandi or equivalent PVC section (58 mm x 23 mm) and panel in fill comprising of Sintex, Nandi or equivalent product multi chamber hallow PVC sections (200mm x 20mm x 1 mm) with dovetail locking arrangement with necessary anodised aluminum fittings etc., as required and as directed by the EIC complete. All labour and materials. |
| 94 | Removing and refixing glass panes of 3mm to 6 mm thick in Ground floor.in steel windows, ventilators, glazed partitions including polishing etc., as required and as directed by the EIC complete. Labour charges only. But including cost of putty or wooden fillets or clips as required |
| 95 | Fixing glass panes of 3 mm to 6 mm thick in Ground floor in steel windows, ventilators, glazed partitions etc., including polishing after fixing etc., as required and as directed by the EIC complete. Labour charges only but including cost of putty or wooden fillets or clips as required |
| 96 | Supplying Structural steel angle / channel / beam / barsat site of work including transportation etc., as required and as directed by the EIC complete. All L&M. |
| 97 | Supplyingstructural steel M.S.plate at site of work including transportation etc., as required and as directed by the EIC complete. All L&M. |
| 98 | Supplying and fixing ornamental MS grills of approved pattern using MS square or round bars and MS flats etc., of approved size to doors, windows, Jafferies, balconies, gates etc., as required and as directed by the EIC complete. All L&M. |
| 99 | Fabricating, welding or rivetting or bolting steel built up sections, trusses and framed work including cutting, drilling holes, hoisting, fixing in position and applying a priming coat of red oxide paint, as required and as directed by the EIC complete. All L&M but excluding cost of steel. |
| 100 | Welding of mild Steel rails, angles, grills, rods, channels etc., as required and as directed by the EIC complete. All L&M,but excluding cost of steel. |
| 101 | Supplying and fixing rolling shutters self coiling type (Push Pull type) or manual type 18 gauge (1.25 mm) lath sections as per IS 6248 including hood cover 1 mm thick, bracket plates, pipe shafts, pulleys, springs, ball bearings, guide channels 3.15 mm thick, Lock Plates 3.15mm thick with handles, sliding locks at either end hold fasts, stoppers etc., finished with a coat of red oxide primer etc., as required and as directed by the engineer in charge complete. All L& M |
| 102 | Supplying and fixing collapsible gates as per IS 10521 Single or double panelled with rolled steel vertical channels 18 x 9 x 3 mm size and crossing with 18 x 5 mm MS flats, bottom runner with T or E Section having web of 40 x 12 mm and flange 40 x 6 mm top runner with MS flats 40x12mm size including roller wheels, latches, locking arrangements, handles, stoppers, hold fasts etc., finishing with one coat of red oxide primer etc., as required and as directed by the engineer in charge complete. All Labour& Materials. |
| 103 | Providing and fixing G.I. tubular gates (double shutters) with 40 mm dia GI Pipes and specials including diagonal pipes and frame welded to approved weld mesh of 75 x 25 mm size (3.15mm x 5mm dia) including painting with one priming coat and two coats of synthetic enamel paint of approved colour and shade (total 3 coats) etc., with locking arrangements, necessary MS flats, Iron pintels etc., including fixing in CC bed blocks as directed with 12mm dia bolts and nuts, and washers etc., as required and as directed by the EIC complete. All labour and materials. |
| 104 | Repairs to rolling shutters such as welding of shaft etc., greasing, repairs to thepanels,and putting the shutters in working condition etc., as required and as directed by the EIC complete. |
| 105 | Supplying and fixing 18 gauge T.M.s. panels (Blades) to rolling shutters etc., as required and as directed by the Engineering-in-charge complete.All labour and materials. |
| 106 | Polishing the mosaic surface by using polishing machine and manual polishing with suitable grit stones, cleaning the surface, removing old wax and cleaning with oxalic acid to obtain smooth surface and finishing with mansion polish etc., as required and as directed by the EIC complete. AllLabour and materials |
| 107 | Supplying and laying White Adanga marble tiles 60x 45 CM size or 60x60cm size for flooring dado or skirting etc., of thickness 18 to 24 mm conforming to IS 1130 laid on a bed of C.M.1: 4, 20 mm thick including rubbing and polishing etc., as required and as directed by the EIC complete.All labour and materials. |
| 108 | Flooring with C.C. 1:2:4 nominal mix 40mm thick (using 17kg of cement per sq.m) using 20mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in alternate panels, tamping, finishing with a floating coat/ rendering neat and smooth with cement including cement slurry, curing etc., as required and as directed by the engineer in chargecomplete.All labour and materials. |
| 109 | Half Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same |
| 110 | Full Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same. |
| 111 | Supply of High Polished Granite 16 to 18 mm thick up to 2.43 M other than black/ premium colours at site of worketc., as required and as directed by the engineer in charge complete.All labour and materials. |
| 112 | Supply of High Polished Granite 16 to 18 mm thick up to 2.43 M other than black and regular colours at site of worketc., as required and as directed by the engineer in chargecomplete.All labour and materials. |
| 113 | Providing and fixing flooring with full depth jointing and pointing to the Marble/ Granite flooring for any sizes with epoxy emulsion grout/ synthetic / resin based adhesive in width of 3-5 mm excluding cost of tiles. etc., as required and as directed by the engineer in charge complete. |
| 114 | Providing and fixing flooring with full depth jointing and pointing to the Marble/ Granite flooring for any sizes with cement based adhesive in width of 3-5 mm excluding cost of tiles. Etc., as required and as directed by the engineer in charge complete. |
| 115 | Supplying and fixing dressed double polished cuddapah slabs for cooking platforms and similar type of works etc., fixing with CM 1:3 etc., including black oxide powder, drilling holes etc, as required, and as directed by the EIC complete. All labour and materials. |
| 116 | Supplying and laying 2 mm thick flexible PVC floor tiles or sheets conforming to IS 3462 including cost of adhesive etc., as required and as directed by the EIC complete. All labour and materials. |
| 117 | Supplying and laying linolium flooring with 2 mm thick plain sheets or tiles of approved colour and shade conforming to IS 653 and laying as per IS 1198 including cost of adhesive etc., as required and as directed by the EIC, complete. All labour and materials. |
| 118 | Supplying and fixing glazed tiles whiteof minimum 5 mm thick of approved quality, laid on a bed of 12 mm thick CM 1:3 including pointing with white or colour cement curing etc., as required and as directed by the EIC complete. All labour and materials. |
| 119 | Supplying and fixing glazed tiles colour of minimum 5 mm thick of approved quality, laid on a bed of 12 mm thick CM 1:3 including pointing with white or colour cement, curing etc., as required and as directed by the EIC complete. All labour and materials. |
| 120 | Supplying and fixing pressed ceramic tiles of first quality tiles with water absorption greater than 10% conforming to IS : 15622-2006 of approved pattern colour and shade, glazed or unglazed tiles for walls and risers of steps laid on a bed of 12 mm thick CM1: 3 including pointing with White or colour cement, curing etc., as required and as directed by the Engineer-in-charge complete. All L&M. Tiles of minimum thickness 8 mm for greater than or equal to 30x30cm and 7mm for less than or equal to 20x30 cm size. |
| 121 | Supplying and fixingpressed ceramic tiles of commercial quality tiles with water absorption greater than 10% conforming toIS : 15622-2006 of approved pattern, colour and shade, glazed or unglazed tiles for walls and risers of steps laid on a bed of 12 mm thick CM 1:3 including pointing with white or colour cement, curing etc., as required and as directed by the EIC complete. All L&M. Tiles of minimum thickness 8 mm for greater than or equal to 30x30 cm and 7 mm for less than or equal to 20x30 cm size. |
| 122 | Supplying and fixing pressed ceramic tiles of first quality tiles with water absorption 3 to 6% conforming toIS : 15622-2006 of approved pattern, PEI Grade, Colour and shade, glazed or unglazed tiles for floors, treads of steps and landings laid on a bed of 12 mm thick CM 1:3 including pointing with white or colour cement, curing etc., as required and as directed by the Engineer-in-charge complete. All L&M Tiles of minimum thickness 8 mm for greater than or equal to 30x30 cm and 7 mm for 20x20 cm size. |
| 123 | Supplying and fixing vitrified tile Johnson make marbonite Jupiter of size 600x600x10mm. of approved pattern colour and shade and design for floors laid on a bed of 12 mm. thick in CM 1:3 including painting with white or colour cement, curing etc., as required and as directed by the engineer in charge complete. All labour and materials. |
| 124 | Polishing marble floors/walls by using polishing machine and by manual polishing including cleaning the surface with oxalic acid to obtain smooth surface etc., as required and as directed by the EIC, Complete. All labour and materials. |
| 125 | Supplying and laying marble slabs White Adanga Marble. for floorings stairs, facings, table tops etc., of thickness 20 mm, width 30 to 100 cm and length 150 to 250 cm as required conforming to IS 1130 laid on a bed of CM 1:4, 20 mm thick including rubbing and polishing as required and as directed by the EIC. Complete. All L&M. |
| 126 | Chequered terrazzo tiles flooring 22mm thickDark shades using ordinary cement tiles conforming to IS 13801 approved colour and shade laid on a bed of CM 1:3, 20 mm thick, jointed with neat cement slurry to match the shade of the tiles including rubbing and polishing etc., as required and as directed by the Engineer, complete.All labour and materials |
| 127 | Flush or ruled pointing to stone masonry work with C.M.1: 3 including raking out joints, cleaning the surface curing etc., as required and as directed by the EIC complete. All labour and materials. |
| 128 | Plastering with C.M.1:4, 12 mm thick including raking out joints, cleaning the surface, curing etc., as required and as directed by the EIC complete. All labour and materials. |
| 129 | Plastering with C.M.1:4, 20 mm thick including raking out joints, cleaning the surface, curing etc., as required and as directed by the EIC complete.All labour and materials. |
| 130 | Plastering with C.M.1:3, 20 mm thick including raking out joints, cleaning the surface, curing etc., including mixing water proofing compound pudlo or impermo 2% by weight of cement etc., as required and as directed by the EIC complete. Alllabour and materials. |
| 131 | Plastering with CM 1:5, 20 mm thick including raking out joints, cleaning the surface, curing etc., as required and as directed by the EIC complete. All labour and materials. |
| 132 | Plastering with CM 1:5, 12mm thick including raking out joints, cleaning the surface, curing etc., as required and as directed by the EIC complete. All labour and materials. |
| 133 | Supplying and fixing chicken mesh of 18 Gauge wire and 25 mm aperture of approved make and quality and plastering both sides with CM 1:3, 25 mm thick (total thickness to be 50 mm) for parapet, facia handrail, rear side of almairahs, cup boards and similar type of works etc., as required and as directed by the EIC complete Alllabour and materials. |
| 134 | Finishing with plaster of paris of 5 mm thick on walls and ceilings etc. including cost of water, mixing, sand papers, brushes etc., as required and as directed by the EIC complete. All labour and materials. |
| 135 | Plastering with C.M.1:3, 12 mm thick including racking out joints, cleaning the surface, curing etc., including mixing water proofing compound pudlo or impermo 2% by weight of cement etc., as required and as directed by the EIC. Complete. All labour and materials. |
| 136 | Plastering with CM 1:4, 20 mm thick including mixing water proofing compound pudlo or impermo 2% by weight of cement including raking out joints, cleaning the surface curing etc., as required and as directed by the EIC complete. All labour and materials |
| 137 | Painting priming coat with approved wood primer pink on new woodwork including cleaning the surface etc., as required and as directed by the Engineer-in-charge, complete. All labour and materials. |
| 138 | Painting priming coat with approved red oxide (anti corrosive) on new ironwork including cleaning the surface etc., as required and as directed by the EIC complete. All labour and materials. |
| 139 | Painting with coal tar one coat including cleaning the surface etc., as required and as directed by the EIC complete. All labour and materials. |
| 140 | Polishing with one coat of French polish of approved variety on wood work including scraping, smoothening and cleaning the surface etc., as required and as directed by the EIC complete. All labour and materials. |
| 141 | PaintingTwo coats to new wood work with synthetic enamel paint of approved colour and shade except white enamel paint including cleaning the surface and scraping the surface wherever required etc., as required and as directed by the EIC complete. All L&M. |
| 142 | Painting Two coats to new iron work with synthetic enamel paint of approved colour and shade except white enamel paint including cleaning the surface and scraping the surface wherever required etc., as required and as directed by the EIC complete. All L&M. |
| 143 | Painting priming coat with white cement ACC/ Birla/ JK brand or equivalent Quality of approved make to walls, ceiling etc.including cleaning the surface and scraping the surface and washing with soap water and including watering etc., as required and as directed by the EIC complete Alllabour and materials. |
| 144 | Painting Two coats to old iron work with approved ready mixed aluminum paint including cleaning the surface scraping the surface wherever required etc., as required and as directed by the EIC complete. All labour and materials. |
| 145 | Painting Two coats to new iron work with approved ready mixed aluminum paint including cleaning the surface scraping the surface wherever required etc., as required and as directed by the EIC complete. All labour and materials. |
| 146 | Supply of wood primer pink of approved make like Asian orBerger or any other approved quality at site of work etc., as required and as directed by the EIC complete.All labour and materials. |
| 147 | Varnishing one coat to woodwork including cleaning the surface etc., as required and as directed by the EIC complete. All labour and materials. |
| 148 | Painting priming coat to walls and ceiling surfaces with approved liquid cement primer including cleaning the surface scraping the surface and washing with soap water etc., as required and as directed by the Engineer-in-charge, complete.All labour and materials. |
| 149 | Painting one coat to walls and ceiling surfaces with approved plastic emulsion paint including cleaning the surface etc., as required and as directed by the Engineer-in-charge, complete.All labour and materials. |
| 150 | Snowcem or other equivalent quality water proof cement paint one coat of approved colour and shade to walls etc., on plastered and concrete surfaces including watering etc., as required and as directed by the Engineer-in-charge, complete.All labour and materials |
| 151 | Snowcem or other equivalent quality water proof cement paint TWO coats of approved colour and shade to walls etc., on plastered and concrete surfaces including watering etc., as required and as directed by the Engineer-in-charge, complete.All labour and materials |
| 152 | Scraping the old walls and removing the existing white wash or colour wash or distemper etc., and exposing the existing plastering surface and cleaning the surface etc, as required and as directed by the Engineer-in-charge, complete. |
| 153 | Providing two coats of white cement based putty Birla or JK or equivalent quality of approved make to walls, ceiling surfaces etc., with putty blade or trowel including cleaning the surface, scraping the surface with fine water proof emery paper after consecutive coats make the surface ready for painting etc., as required and as directed by the engineer in chargecomplete. All labour and materials |
| 154 | Providing Painting two coats with weather coat smooth exterior paint or equivalent approved quality colour and shade etc,on plastered / concrete surface including cleaning the surface, watering etc, as required and as directed by the engineer in charge complete.All labour and materials. |
| 155 | Supplying and fixing long pattern 580 mm size with two foot rests (white) vitreous water closets squatting pan (Indian type) of approved make conforming to I.S 2556 (Pt.III) with P or S trap including cutting and making good the walls and floors etc., as required and as directed by the EIC complete. All labour and materials. |
| 156 | Supplying and fixing 10 Ltrs. plastic flushing cistern for Indian type water closet conforming to IS 7231 including fittings, C.P Flush pipe, 15 mm CP Brass stop valve etc., cutting and making good the walls and floors etc., as required and as directed by the EIC complete. All labour and materials. |
| 157 | Supplying and fixing vitreous white flat back or angle back lipped front bowl type urinal conforming to I.S 2556 (Pt.VI / Sec.I) of approved make including fixing wooden plugs, screws, 32mm PVC Waste pipe etc. cutting and making good the walls etc., as required and as directed by the EIC complete. All labour and materials. |
| 158 | Supplying and fixing Vitreous white flat back half stall urinal conforming to I.S 2556 (Pt.VI Sec.2) of approved make 450 x 350 x 300 mm size including C.P Brass spreader with unions and clamps, C.P Brass bottle trap, C.P Brass waste fittings fixing wooden plugs and screws cutting and making good the walls etc., as required and as directed by the EIC complete. All labour and materials. |
| 159 | Supplying and fixing ball valve of approved quality as per I.S 1703 as required including polyethylene float as directed by the EiC complete. All Labour and materials.-15 mm nominal size. |
| 160 | Supplying and fixing 20mm nominal size ball valve of approved quality as per I.S 1703 as required including polyethylene float as directed by the EiC complete. All Labour and materials. |
| 161 | Supplying and fixing Flat back 630 x 450mm white vitreous wash basin of approved make, single 15 mm C.P Brass pillar tap, 15 mm C.P Brass stop valve, C.P Brass chain and rubber plug 32mm C.P Brass waste fittings, 32 mm PVC Waste pipe painted C.I brackets etc., including cutting and making good the walls etc., as required and as directed by the EIC complete. All L&M. |
| 162 | Supplying and fixing Flat back 550 mm x 400 mm white vitreous wash basin of approved make, single 15 mm C.P Brass pillar tap, 15 mm C.P Brass stop valve, C.P Brass chain and rubber plug 32mm C.P Brass waste fittings, 32 mm PVC Waste pipe painted C.I brackets etc., including cutting and making good the walls etc., as required and as directed by the EIC complete. All L&M. |
| 163 | Supplying and fixing cast iron floor trap / nahani trap with 100 mm dia grating and 50 mm dia out let including cutting and making good the floor etc., as required and as directed by the EIC complete. All Labour and materials. |
| 164 | Supplying and fixing 600 x 450 mm bevelled or rounded edge mirror, 5 mm thick of superior glass with 6 mm thick asbestos sheet at rear, fixing wooden cleats, C.P Brass screws and washers etc., as required and as directed by the EIC complete. All labour and materials. |
| 165 | Supplying and fixing aluminum towel rail 750 mm x 18 mm with aluminum brackets, fixing wooden cleats, C.P Brass screws etc., as required and as directed by the EIC complete. All labour and materials. |
| 166 | Supplying of 150 mm dia pipes salt glazed stoneware pipes (standard length 60 cm) at site of work etc., as required and as directed by the EIC complete. All labour and materials. |
| 167 | Supplying of 100 mm dia pipes salt glazed stoneware pipes (standard length 60 cm) at site of work etc., as required and as directed by the EIC complete. All labour and materials. |
| 168 | Supplying of salt glazed stoneware junctions 100 mm x 100 mm dia Single T or Y(standard length 60 cm) at site of work as required and as directed by the EIC complete. All labour and materials. |
| 169 | Supplying of salt glazed stoneware junctions 150 mm x 100 mm dia Single T or Y(standard length 60 cm) at site of work as required and as directed by the EIC complete. All labour and materials. |
| 170 | Supplying of salt glazed stoneware bends 150 mm dia at site of work etc, as required and as directed by the EIC complete. All labour and material |
| 171 | Supplying of salt glazed stoneware bends 100 mm dia at site of work etc, as required and as directed by the EIC complete. All labour and material |
| 172 | Laying of 150mm dia pipes salt glazed stoneware pipes and fittings Grade ‘A’ as per IS 651 including necessary excavation of trenches lowering and setting the pipes to the required gradient jointing the pipes with spun yarn soaked in neat cement slurry or tarred gaskets and with CM 1:1 curing, testing, refilling the trenches and making good the excavated surface etc., as required and as directed by the engineer in charge complete. All Labour and materials but excluding cost of pipes and fittings. |
| 173 | Laying of100 mm dia salt glazed stoneware pipes and fittings Grade ‘A’ as per IS 651 including necessary excavation of trenches lowering and setting the pipes to the required gradient jointing the pipes with spun yarn soaked in neat cement slurry or tarred gaskets and with CM 1:1 curing, testing, refilling the trenches and making good the excavated surface etc., as required and as directed by the engineer in charge complete. All Labour and materials but excluding cost of pipes and fittings. |
| 174 | Providing and fixing 15mm Dia medium grade GI Pipes and specials (as per I S 1239) including cutting the pipes, threading etc., and fixing specials such as bends, tees, sockets, unions, reducers etc., by lead wool etc., wherever necessary including earth work excavation of trenches to required depth and refilling after laying etc., and making good as per original etc., as required and as directed by the engineer in charge complete. All L&M. |
| 175 | Providing and fixing20mm Dia medium grade GI Pipes and specials (as per I S 1239) including cutting the pipes, threading etc., and fixing specials such as bends, tees, sockets, unions, reducers etc., by lead wool etc., wherever necessary including earth work excavation of trenches to required depth and refilling after laying etc., and making good as per original etc., as required and as directed by the engineer in charge complete. All L&M. |
| 176 | Providing and fixing 25mm Dia medium grade GI Pipes and specials (as per I S 1239) including cutting the pipes, threading etc., and fixing specials such as bends, tees, sockets, unions, reducers etc., by lead wool etc., wherever necessary including earth work excavation of trenches to required depth and refilling after laying etc., and making good as per original etc., as required and as directed by the engineer in charge complete. All L&M. |
| 177 | Providing and fixing40mm Dia medium grade GI Pipes and specials (as per I S 1239) including cutting the pipes, threading etc., and fixing specials such as bends, tees, sockets, unions, reducers etc., by lead wool etc., wherever necessary including earth work excavation of trenches to required depth and refilling after laying etc., and making good as per original etc., as required and as directed by the engineer in charge complete. All L&M. |
| 178 | Providing and fixing50mm Dia medium grade GI Pipes and specials (as per I S 1239) including cutting the pipes, threading etc., and fixing specials such as bends, tees, sockets, unions, reducers etc., by lead wool etc., wherever necessary including earth work excavation of trenches to required depth and refilling after laying etc., and making good as per original etc., as required and as directed by the engineer in charge complete. All L&M. |
| 179 | Supply gunmetal 15mm Dia wheel valves half way with socket ends of approved make at site of work etc., as required and as directed by the engineer in charge complete. All Labour and materials |
| 180 | Supply gunmetal20mm Dia wheel valves half way with socket ends of approved make at site of work etc., as required and as directed by the engineer in charge complete. All Labour and materials |
| 181 | Supply gunmetal 25mm Dia wheel valves half way with socket ends of approved make at site of work etc., as required and as directed by the engineer in charge complete. All Labour and materials |
| 182 | Supply 50mm Dia gun metal wheel valves half way with socket ends of approved make at site of work etc., as required and as directed by the engineer in charge complete. All Labour and materials |
| 183 | Supplying and fixing vitreous white ware wash down water closet (European type) conforming to IS 2556 (Pt.II) with P or S trap plastic seat and cover CP Brass hinges and rubber buffers, 10 Ltrs. low level vitreous flushing cistern conforming to I.S 774 with fittings, C.P flush pipe 15mm C.P Brass stop valve etc., including cutting and making good the walls and floors etc., as required and as directed by the engineer in charge complete. All L&M. |
| 184 | Supplying approved quality and colour of plastic seat and cover for European type water closets at site of work with necessary plastic or rubber buffers CP Brass bolts, nuts etc., as per IS 2548 etc., as required and as directed by the engineer in charge complete. All L&M. |
| 185 | Supplying and fixing 15 mm. dia (400 grms) Brass screw down bib taps of approved quality and makeetc., as required and as directed by the engineer in charge complete. All L&M. |
| 186 | Supplying and fixing cast iron man hole covers and frame single seal. Light duty square typeClear opening of 610 mm x 610 mm size Minimum weight of cover 25 Kg. and frame 13 Kg. as per IS.1726, etc., as required and as directed by the engineer in charge complete. All labour and materials. |
| 187 | Supplying and fixing in position rain water trapezoidal Gutter using MS plate, MS angle, clamps at 1.5m center to center fixed to purlin including necessary stop ends and drop ends nozzles including sheet bending to shape, welding, cutting holes, bolts, nuts and rivets etc., as required and as directed by the Engineer-in-charge complete. All labor and materials. |
| 188 | Supplying and fixing CP Brass pillar cock of 15 mm dia with check nuts for wash hand basin etc., at site of work etc., as required and as directed by the engineer in charge complete. All L&M. |
| 189 | Supplying and fixing S or P traps for IWC etc., at site of work etc., as required and as directed by the engineer in charge complete. All L&M. |
| 190 | Supplying and fixing 15 mm dia plastic taps (PVC) of approved make and quality etc., with necessary fittings etc., as required and as directed by the engineer in charge complete. All L&M. |
| 191 | Supplying and laying un-plasticized PVC (Poly vinyl chloride)20mm outside dia pipes for potable water supplies, as per I.S:4985 in plumbing work including cutting the pipes, threading, clamps etc., fixing specials such as bends, tees, sockets unions, reducers etc., as required including making good the cuttings such as floors, walls etc., as per original etc., as required and as directed by the engineer in charge complete. All L&M. |
| 192 | Supplying and laying un-plasticized PVC25 mm outside dia (Poly vinyl chloride) pipes for potable water supplies, as per I.S:4985 in plumbing work including cutting the pipes, threading, clamps etc., fixing specials such as bends, tees, sockets unions, reducers etc., as required including making good the cuttings such as floors, walls etc., as per original etc., as required and as directed by the engineer in charge complete. All L&M. |
| 193 | Supplying and fixing500 Ltrs. Capacity polyethylene water storage tank conforming to IS 12701, rotational moulded cylindrical vertical type including top cover with locking provision, necessary GI Fittings for inlet out let overflows and washout including lifting, hoisting in position fixing etc., as required and as directed by the engineer in charge complete. All L&M |
| 194 | Supplying and fixing 1000 Ltrs. Capacity polyethylene water storage tank conforming to IS 12701, rotational moulded cylindrical vertical type including top cover with locking provision, necessary GI Fittings for inlet, outlet, overflows and washout including lifting, hoisting in position, fixing etc., as required and as directed by the engineer in charge complete. All L&M |
| 195 | Supplying and fixing 2000 Ltrs. Capacity polyethylene water storage tank conforming to IS 12701, rotational moulded cylindrical vertical type including top cover with locking provision, necessary GI Fittings for inlet, outlet, overflows and washout including lifting, hoisting in position, fixing etc., as required and as directed by the engineer in charge complete. All L&M |
| 196 | Supplying and fixing 5000 Ltrs. Capacity polyethylene water storage tank conforming to IS 12701, rotational moulded cylindrical vertical type including top cover with locking provision, necessary GI Fittings for inlet, outlet, overflows and washout including lifting, hoisting in position, fixing etc., as required and as directed by the engineer in charge complete.All L&M |
| 197 | Supplying GI reducing elbows as per I.S. of approved make 20 x 15 mm at site of work etc., as required and as directed by the engineer in charge complete. All Labour and materials. |
| 198 | Supplying GI Unions as per I.S of approved make at site of work etc., as required and as directed by the engineer in charge complete. All labour and materials. |
| 199 | 15 mm dia |
| 200 | 20 mm dia |
| 201 | 25mm Dia |
| 202 | Supplying GI Nipples as per I.S of approved make at site of work etc., as required and as directed by the engineer in charge complete. All Labour and materials |
| 203 | 20 mm dia X 50mm long |
| 204 | 15 mm dia X 50MM long |
| 205 | Supplying the following GI specials at site of work etc., as required and as directed by the engineer in charge, complete.All labour and materials. |
| 206 | 15 mm dia Tee |
| 207 | 20 mm dia Tee |
| 208 | 25 mm dia Tee |
| 209 | 50 mm dia Tee |
| 210 | 15 mm dia Elbows |
| 211 | 20 mm. dia Elbows |
| 212 | 25 mm. dia Elbows |
| 213 | 50 mm. dia Elbows |
| 214 | Nipple-25x75mm long |
| 215 | Nipple-15x100mm long |
| 216 | Nipple-15x150mm long |
| 217 | Nipple-20x75mm long |
| 218 | 20 x 15mm. Reducer elbow |
| 219 | 20 x 15mm. Reducer socket |
| 220 | 15 mm dia GI socket |
| 221 | 20 mm.dia GI socket |
| 222 | 25mm dia GI socket |
| 223 | Supplying 20 mm. x 100 mm. nipples |
| 224 | Supplying 20 x 150 mm. nipples |
| 225 | Supplying 25 x 50 mm. dia nipples |
| 226 | Supplying 25 x 100 mm. Nipples |
| 227 | Supplying 25 x 150 mm nipples |
| 228 | Supplying 25 x 300 mm. Nipples |
| 229 | Supply of GI nipple 20 mm. dia with check nuts and rubber washer (to suit for PVC tank connection) at site of work etc., as required and as directed by the engineer in charge, complete. All Labour and materials |
| 230 | Supplying of brass sitting (to suit 15 mm. brass bib cocks) at the site of work etc., as required and as directed by the engineer in charge, complete.All labour and materials. |
| 231 | Supply of Nylon Rubber Washer (to suit 15 mm. dia brass taps) at site of work etc., as required and as directed by the engineer in charge, complete.All labour and materials. |
| 232 | Supplying of 15 mm. Dia GI pipes medium grade as per IS-1239 at site of work including transportationetc., as required and as directed by the engineer in charge complete.All labour and materials. |
| 233 | Supplying of 20 mm. Dia. GI pipes medium grade as per IS-1239 at site of work including transportation etc., as required and as directed by the engineer in charge complete.All labour and materials. |
| 234 | Supplying of 50 mm. Dia. GI pipes medium grade as per IS-1239 at site of work including transportationetc., as required and as directed by the engineer in charge complete. All labour and materials. |
| 235 | Supplying and fixing 15 mm dia polythene pipe connection as required with brass plumbing union of approved make and quality, including cost of caulking materials etc., as required and as directed by the engineer in charge complete. All L&M. |
| 236 | Supplying un-plasticized PVC 110 mm dia Pipe as per IS 13592:1992 type B (6 Kg/Cm2) (Rigid PVC) soil waste and rain water pipes, and fittings and accessories at site of work including cost of rubber rings for jointing purposes etc., as required and as directed by the engineer in charge complete. All L&M. |
| 237 | Supplying 160 mm. dia pipes un-plasticized PVC (Rigid PVC) soil waste and rain water pipes, and fittings and accessories including cost of rubber rings for jointing purposes at site of work, etc., as required and as directed by the engineer in charge complete.All L&M. Pipes IS 13592:1992 type B (6 Kg/Cm2) |
| 238 | Supplying 75 mm dia pipe un-plasticized PVC (Rigid PVC) soil waste and rain water pipes, and fittings and accessories including cost of rubber rings for jointing purposes at site of work, etc., as required and as directed by the engineer in charge complete. .All L&M. Pipes IS 13592:1992 type B (6 Kg/Cm2) |
| 239 | Supplying un-plasticized PVC (Rigid PVC) soil waste and rain water pipes, and fittings and accessories including cost of rubber rings for jointing purposes at site of work, etc., as required and as directed by the engineer in charge complete. All L&M.-110 mm dia Plain bend 87.5 degres |
| 240 | Supplying un-plasticized PVC (Rigid PVC) soil waste and rain water pipes, and fittings and accessories including cost of rubber rings for jointing purposes, at site of work, etc., as required and as directed by the engineer in charge complete.All L&M.-110 mm. dia single Tee With door |
| 241 | Supplying un-plasticized PVC (Rigid PVC) soil waste and rain water pipes, and fittings and accessories including cost of rubber rings for jointing purposesat site of work, etc., as required and as directed by the engineer in charge complete.All L&M. -75 mm. dia single Tee With door |
| 242 | Supplying un-plasticized PVC (Rigid PVC) soil waste and rain water pipes, and fittings and accessories including cost of rubber rings for jointing purposes, etc., as required and as directed by the engineer in charge complete. At site of work.All L&M. -75 mm dia door bend 87.5 Degrees |
| 243 | Supplying un-plasticized PVC (Rigid PVC) soil waste and rain water pipes, and fittings and accessories including cost of rubber rings for jointing purposes, etc., as required and as directed by the engineer in charge complete. At site of work.All L&M.-75mm dia offset bend 6 Inches |
| 244 | Supplying un-plasticized PVC (Rigid PVC) soil waste and rain water pipes, and fittings and accessories including cost of rubber rings for jointing purposes at site of work, etc., as required and as directed by the engineer in charge complete. All L&M.-75 mm dia Vent cowl |
| 245 | Supplying 110 mm dia Pipe clips un-plasticized PVC (Rigid PVC) soil waste and rain water pipes, and fittings and accessories including cost of rubber rings for jointing purposes at site of work, etc., as required and as directed by the engineer in charge, complete. All L&M. |
| 246 | Supplying 75 mm dia PVC Pipe clips un-plasticized PVC (Rigid PVC) soil waste and rain water pipes, and fittings and accessories including cost of rubber rings for jointing purposes at site of work, etc., as required and as directed by the engineer in charge, complete. All L&M. |
| 247 | Supplying 110 mm dia offset bend 6 inches un-plasticized PVC (Rigid PVC) soil waste and rain water pipes, and fittings and accessories including cost of rubber rings for jointing purposes at site of work, etc., as required and as directed by the engineer in charge complete. All L&M. |
| 248 | Supplying 110 mm dia vent cowl un-plasticized PVC (Rigid PVC) soil waste and rain water pipes, and fittings and accessories including cost of rubber rings for jointing purposes at site of work., etc., as required and as directed by the engineer in charge, complete. All L&M. |
| 249 | Supplying and fixing 32 mm. dia PVC waste pipe etc., as required and as directed by the engineer in charge complete. All L&M |
| 250 | Laying of 160/110/75 mm dia PVC soil waste and rain water pipes and fittings or specials including cutting the pipes, chamfer the pipe ends, cost of solvent cement/ lubricant, jointing, fixing pipe clips, leak proof testing etc., including cutting masonry/concrete as required at floors and walls etc., and making good the same as per original and etc., as required and as directed by the engineer in charge complete. All labour and materials but excluding cost of pipes and fittings or specials. |
| 251 | Supplying 15 mm dia Jayson make aluminum alloy tap (waste not cock) at site of work etc., as required and as directed by the engineer in charge complete. All L&M. |
| 252 | Supplying and fixing vitreous white half round channels, corner channels, stop ends etc., of internal radius 50 mm with or without out-let conforming to IS 2556 (Part-VII) fixing in CM 1:3 and jointing with white cement etc., as required and as directed by the engineer in charge complete.All labour and materials. |
| 253 | Supplying of gravel or moorum at site of work including stacking etc., as required and as directed by the engineer in charge complete. All Labour and materials |
| 254 | Supplying of river or gedda sand at site of work including stacking etc., as required and as directed by the engineer-in-charge complete. All Labour and materials |
| 255 | Supplying and stacking graded granite metal of size range 63 mm to 45 mm at site etc., as required and as directed by the engineer-in-charge, complete. All Labour and materials |
| 256 | Picking up and scarifying old metalled surface 50 to 100 mm deep including removing the picked up stuff and stacking at a place shown etc., as required and as directed by the engineer-in-charge, complete. |
| 257 | Spreading sand or moorum or gravel in layers, compaction with Power Roller, watering etc., including hire of roller, operational charges, tools and plant, copious watering etc., as required and as directed by the engineer in charge complete. All Labour and materials but excluding cost of sand or moorum or gravel. |
| 258 | Spreading sand or gravel or moorum or cinder in layers compaction with hand roller and with rammers, watering etc., as required and as directed by the engineer in charge complete. All Labour and materialsbut excluding cost of sand or gravel, moorumor cinder. |
| 259 | Cutting and removing old tar macadam surface etc. and disposing the debris within a lead of 50 m.etc., as required and as directed by the engineer in charge complete. |
| 260 | Supplying granite metal of 6 MM. Size at site of work including loading, transporting, unloading and stacking etc., as required and as directed by the engineer in charge complete.All labour and materials |
| 261 | Supplying crushed dust at site of work including stacking and spreading in layers etc., as directed by the EIC complete. All Labour and materials |
| 262 | Dismantling reinforced cement concrete and removing the debris within a lead of 50 m including cutting reinforcement bars and stacking the useful materials including handing over the bars to Stores etc., as required and as directed by the engineer in charge complete. |
| 263 | Dismantling lime or cement concrete and removing the debris within a lead of 50 m. etc., as required and as directed by the engineer in charge complete. and stacking the useful materials. |
| 264 | Dismantling brick or stone masonry in lime (or) C.M. and stacking within a lead of 50 m. the useful materials and removing the debris , etc., as required and as directed by the engineer in charge complete. |
| 265 | Dismantling pitching or dry walling and carefully stacking the useful materials within a lead of 50 m. and removing the debris etc., as required and as directed by the engineer in charge complete. |
| 266 | Dismantling AC Sheet or CGI Sheet roofing and / or walling including ridges etc., and stacking the useful materials and removing the debris within a lead of 50 m. etc., as required and as directed by the engineer-in-charge complete. |
| 267 | Dismantling lime or cement plastering from walls and raking out joints up to 20 mm deep and cleaning the surface etc., including disposing the debris within a lead of 50 m etc., as required and as directed by the engineer-in-charge complete. |
| 268 | Removing old door with frames for repairs and refixing including dismantling masonry and making good the same etc., as required and as directed by the engineer-in-charge complete. All Labour and materials |
| 269 | Removing old window with frames for repairs and refixing including dismantling masonry and making good the same etc., as required and as directed by the engineer-in-charge complete. All Labour and materials |
| 270 | Raggling of masonry or concrete surface etc. and dispose the debris within a lead of 50 m.etc., as required and as directed by the engineer-in-charge complete. |
| 271 | Dismantling barbed/plain wire fencing including making rolls and stacking within a lead of 50 m., etc., as required and as directed by the engineer-in-charge complete. |
| 272 | Dismantling and stacking RCC and / or Steel fencing posts or struts within 50m lead including earthwork, refilling, dismantling of concrete etc., in the base etc., as required and as directed by the engineer-in-charge complete. |
| 273 | Supplying and fixing MS fan hook including dismantling concrete and making good as per original, curing etc., as required and as directed by the engineer-in-charge complete. All L&M |
| 274 | Supplying and fixing galvanized steel barbed wire fencing 4 points 2 ply 12 gauge wire (points at a distance of 75 mm) including passing through the holes left, tightening, tying with G.I binding wire as required, transportation to site of work, cost of binding wire etc., as required and as directed by the engineer-in-charge complete. All labour and materials. |
| 275 | Supplying cattle manure at site of work including stacking etc., as required and as directed by the engineer-in-charge complete. complete. All labour and materials. |
| 276 | Supplying and fixing rolling springs of required size and make such as English or Swedish or its equivalent spring steel wire for rolling shutters as required level and reconditioning the shutters etc., as required and as directed by the engineer-in-charge complete. All labour and materials. |
| 277 | Supplying and fixing approved superior variety curtain for doors and windowsof Polyester cottonincluding stitching charges for 4 sides,stiffner cloth on top and providing plastic hanging ringsetc., as required and as directed by the engineer in charge complete. All labour and materials payment will be made for finished curtain measurements only.For curtain cloth cost should not be less than Rs.200/Sqm. |
| 278 | Extra labour charges for lead and lifts of materials etc., for plastering ceiling etc. in various floors.- Lift for 1stfloor |
| 279 | Extra labour charges for lead and lifts of materials etc., for plastering ceiling etc. in various floors.Lift for 2nd floor |
| 280 | Extra labour charges for lead and lifts of materials etc., for plastering ceiling etc. in various floors. Lift for 3rdfloor |
| 281 | Extra labour charges for lead and lifts of materials etc., for plastering ceiling etc. in various floors. Lift for 4thfloor |
| 282 | Extra labour charges for lead and lifts of materials etc., for plastering ceiling etc. in various floors. Lift for 5thfloor |
| 283 | De-siltation of drains including removing silt, slush, pebbles, garbage, iron ore, iron ore fines etc., including removing the sand from under water if existing within a lead of 10 m and lift of 2 m and transportation of the same after drying up to ½ Km and levelling the same etc., as required and as directed by the engineer in charge complete. |
| 284 | Transporting debris / excavated earth within including stacking, loading and unloading and levelling the unloaded materials at a place of unloading as required and as directed by the EIC complete. -Up to a lead of 6 KM |
| 285 | Transporting debris / excavated earth within including stacking, loading and unloading and levelling the unloaded materials at a place of unloading as required and as directed by the EIC complete. -Up to a lead of 10 KM |
| 286 | Chipping and removing existing plastering in duct walls to expose brick masonry or concrete surface including cleaning the surface and disposing the debris within a lead of 50 m. or at the place shown etc., as required and as directed by the engineer in charge complete. |
| 287 | Lifting and removing the RCC pre-cast slabs of various sizes over the drains, sub ways, cable ducts, man holes etc., carefully replacing the same in position wherever required without causing damage to the slabs, drains, subways, cable ducts and Manholes etc., as required and as directed by the engineer in charge complete.with all labour, tools, etc., |
| 288 | Providing scaffolding including ballies, ropes, nails etc., as required and as directed by the engineer-in-charge complete. All labour and materials. From 3 M to 6 M height(first floor) |
| 289 | Providing scaffolding including ballies, ropes, nails etc., as required and as directed by the engineer-in-charge complete. All labour and materials. From 6 M to 9 M height(second floor) |
| 290 | Providing scaffolding including ballies, ropes, nails etc., as required and as directed by the engineer-in-charge complete. All labour and materials. From 9 M to 12 M height(third floor) |
| 291 | Providing scaffolding including ballies, ropes, nails etc., as required and as directed by the engineer-in-charge complete. All labour and materials. From 12 M to 15 M height(fourthfloor) |
| 292 | Providing scaffolding including ballies, ropes, nails etc., as required and as directed by the engineer-in-charge complete. All labour and materials. From 15 M to 18 M height(fifth floor) |
| 293 | Providing scaffolding including ballies, ropes, nails etc., as required and as directed by the engineer-in-charge complete. All labour and materials. From 18 M to 21 M height(sixth floor) |
| 294 | Supply of Man Mazdoor / Women Mazdoor / Watchmen, Gangmen / Mazdoor (unskilled) to work in any site conditions etc., as required and as directed by the EIC complete. |
| 295 | Supply of Second class Artisans such as Carpenter/ Mason / painter / Fitter / Welder etc., as required and as directed by the EIC complete. |
| 296 | Supplying and fixing of anodised aluminum doors, windows, ventilators etc., of standard sections of INDAL or Equivalent joints mitred and welded manufactured to relevant IS standardspecification including providing and fixing 4 mm thick plain glass, rubber packing, glazing clips, anodized aluminum beadings, fittings such as hinges, handles, etc., as required applying and removing lacquer coat etc., as directed by the EIC complete. All L&M.-Aluminium Doors |
| 297 | Supplying and fixing of anodised aluminum doors, windows, ventilators etc., of standard sections of INDAL or equivalent joints mitered and welded manufactured to relevant IS standard specification including providing and fixing 4 mm. tick plain glass rubber packing, glazing clips anodised aluminum beadings, fittings such as hinges handles etc., as required applying and removing lacquer coat etc., as directed by the Engineer-in-charge complete. All labour and materials.--Aluminum windows sliding |
| 298 | Supplying and fixing of anodised aluminum doors, windows, ventilators etc., of standard sections of INDAL or equivalent joints mitered and welded manufactured to relevant IS standard specification including providing and fixing 4 mm. thick plain glass rubber packing, glazing clips anodised aluminum beadings, fittings such as hinges handles etc., as required applying and removing lacquer coat etc., as directed by the Engineer-in-charge complete. All labour and materials. Aluminum partitions or door sidelights fully glazed or partly glazed and partly fixed with pre-laminated particleboard6 mm thick OSL Exterior grade ECO Board or equivalent. |
| 299 | Supplying and fixing of anodised aluminum doors, windows, ventilators etc., of standard sections of INDAL or equivalent joints mitered and welded manufactured to relevant IS standard specification including providing and fixing 4 mm. tick plain glass rubber packing, glazing clips anodised aluminum beadings, fittings such as hinges handles etc., as required applying and removing lacquer coat etc., as directed by the Engineer-in-charge complete. All labour and materials. Aluminum windows side hung fully openable with glazing bars. |
| 300 | Providing aluminum beading to MS. Window shutters, ventilators and fixed glazing to hold PVC or Acrylic sheet panel in position with aluminum angle 20 x 12 x 1.5 mm or aluminum flat 20 x 1.5 mm size fixed with aluminum rivets and suitable size including drilling holes, mitre cutting etc., as required and as directed by the engineer-in-charge complete. All labour and materials. |
| 301 | Acid cleaning the floors and dados by application of cleaning acid with sponge and cleaning with water-jet including removing stubborn stains by scraping and applying white / colored cement grout wherever necessary etc., as required and as directed by the engineer-in-charge complete. All labour and materials. |
| 302 | Cleaning the existing nylon/woolen carpet by removing dust and stains, cleaning with suitable chemicals including cost of chemicals, equipment, hire charges etc., as required and as directed by the EIC. Complete. All labour and materials. |
| 303 | Supplying and fixing coir door mat of thickness 32 mm of required size shape and colour including removing and disposing of old door mats etc., as required and as directed by the engineer-in-charge complete. All labour and materials. |
| 304 | Writing sign boards on walls and concrete surfaces by scraping the existing surfaces, finishing, approved colour of synthetic enamel paint, writing letters of size 150mm to 350mm etc., as required and as directed by the engineer-in-charge complete. All labour and materials. |
| 305 | Supplying aluminum handles 100mm long of approved make (ISI make) including nettle fold screws etc., as required and as directed by the engineer-in-charge complete. All labour and materials. |
| 306 | Supplying and fixing PVC cover for PVC Water tanks with necessary PVC hinges locking arrangementsetc., as required and as directed by the engineer-in-charge complete. All labour and materials for all sizes of tanks. |
| 307 | De-siltation of Septic tanks using automatic vacuum loader including removing of sludge, sewage, water etc., and lifting & placing the existing manhole covers (pre cast slabs) including transportation of removed material in a closed container, within a lead of 15 Km and disposing the same at VMC sewage area or and other sewage areas etc., as required and as directed by the engineer-in-charge. including excavation and sludge pits and leveling the same etc., complete. All labour and materials. |
| 308 | Supply and fixing of new wall paper (Easy to clean) of approved quality and make including removing the old paper, cleaning the surface, scraping including cost of adhesive etc., as required and as directed by the engineer-in-charge complete.All labour and materials. |
| 309 | Supplying G.I. Plain sheets 18 guage at site of work etc., as required and as directed by the engineer-in-charge complete.All labour and materials. |
| 310 | Re-canning chairs with plastic cane etc., as required and as directed by the engineer-in-charge complete, including all labour and materials. |
| 311 | Removing and refixing the grills of windows / ventilators for fixing of glass pans / sun control film and etc., as required and as directed by the engineer-in-charge complete.All labour and materials. |
| 312 | Providing sealing compound to ACC sheet roofing bolts of the shed including scaffolding removing the old sealing compound if required, cleaning etc., as required and as directed by the engineer-in-charge complete.All labour and materials but excluding cost of sealing compound. |
| 313 | Supply of oxidised iron fittings at site of work etc., as required and as directed by the engineer-in-charge complete.All labour and materials. -Aldrops 300 mm long 16 mm dia |
| 314 | Supply of oxidised iron fittings at site of work etc., as required and as directed by the engineer-in-charge complete.All labour and materials.-Tower bolts 100 mm long |
| 315 | Supply of oxidised iron fittings at site of work etc., as required and as directed by the engineer-in-charge complete.All labour and materials.-Tower bolts 150 mm long |
| 316 | Supply of oxidised iron fittings at site of work etc., as required and as directed by the engineer-in-charge complete. All labour and materials.-Tower bolts 200 mm long |
| 317 | Supplying 300 mm long aluminium aldrop (16 mm) ISI Mark at site of work etc., as required and as directed by the engineer-in-charge complete.All Labour and materials. |
| 318 | Supplying 250 mm long aluminium aldrop (16 mm) ISI Mark at site of work etc., as required and as directed by the engineer-in-charge complete.All Labour and materials. |
| 319 | Supplying 300 mm long aluminium tower bolt (10mm dia) ISI Mark at site of work etc., as required and as directed by the engineer-in-charge complete.All Labour and materials . |
| 320 | Supplying 250 mm long aluminium tower bolts (10mm) ISI Mark at site of work etc., as required and as directed by the engineer in charge complete. All L&M |
| 321 | Supplying 150 mm long aluminiumdoor handle ISI Markat site or worketc., as required and as directed by the engineer-in- charge complete. All L&M |
| 322 | Supply of glass putty at site of work and etc., as required and as directed by the engineer-in-charge complete. All L&M |
| 323 | Supply of aluminum fixtures at site of work as perIS etc., as required and as directed by the engineer-in-charge complete. All Labour and materials -Alluminium tower bolt 12mm. dia 300mm. Long |
| 324 | Supply of Door Stopper at site of work etc., as required and as directed by the engineer-in-charge complete. All Labour and materials |
| 325 | Supplying and fixing khus-khus thatties including grass and new bamboo frame etc., as required and as directed by the engineer-in-charge complete. All Labour and materials |
| 326 | Supplying of rubber washers for 10 litres capacity PVC flush tanks of required size and shape at site of work etc., as required and as directed by the engineer-in-charge complete.All Labour and materials |
| 327 | Providing and fixing medium Grade G.I. pipes 15mm dia and specials (as per IS 1239) including cutting the pipes, threading etc., and fixing specials such as bends, tees, sockets, unions, reducers etc., by lead wool clamps etc., wherever necessary including fixing in house plumbing system and making good the cuttings as per original etc., as required and as directed by the engineer in charge complete. All labour and materials. |
| 328 | Providing and fixing 20mm dia medium Grade G.I. pipes and specials (as per IS 1239) including cutting the pipes, threading etc., and fixing specials such as bends, tees, sockets, unions, reducers etc., by lead wool clamps etc., wherever necessary including fixing in house plumbing system and making good the cuttings as per originaletc., as required and as directed by the engineer-in-charge complete. All labour and materials. |
| 329 | Providing and fixing 25mm dia mediumGrade G.I. pipes and specials (as per IS 1239) including cutting the pipes, threading etc., and fixing specials such as bends, tees, sockets, unions, reducers etc., by lead wool clamps etc., wherever necessary including fixing in house plumbing system and making good the cuttings as per original etc., as required and as directed by the engineer-in-charge complete. All labour and materials. |
| 330 | Providing and fixing 32mm diamedium Grade G.I. pipes and specials (as per IS 1239) including cutting the pipes, threading etc., and fixing specials such as bends, tees, sockets, unions, reducers etc., by lead wool clamps etc., wherever necessary including fixing in house plumbing system and making good the cuttings as per original etc., as required and as directed by the engineer-in-charge complete. All labour and materials. |
| 331 | Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) PE100 Grade-Outer Dia 20mm etc., as required and as directed by the engineer-in-charge complete.All labour and materials. |
| 332 | Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) PE100 Grade-Outer Dia 25mm etc., as required and as directed by the engineer-in-charge complete.All labour and materials. |
| 333 | Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) PE100 Grade-Outer Dia 40mm etc., as required and as directed by the engineer-in-charge complete.All labour and materials. |
| 334 | Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) PE100 Grade-Outer Dia 50mm etc., as required and as directed by the engineer-in-charge complete.All labour and materials. |
| 335 | Supplying and fixing of Gyp board design false ceiling using 12.50 mm. thick Gyp board conforming to IS 2095-1982 fixing to Gyp steel channels frames work using perimeter channel (20x30x27x0.55 mm.) intermediate channel (45 x 15 x 15 x 0.90 mm.) and ceiling channels 51.50x26x10.50x0.55 mm. thick jointing and finishing using joint compound and paper tape etc., as required and as directed by the engineer-in-charge complete, finishing as per specification without painting including all labour leads and lifts with materials. |
| 336 | Supplying of push cocks for urinal basins connectionsat site of work etc., as required and as directed by the engineer-in-charge, complete. All Labour and materials. |
| 337 | Supplying of M-seal for leaking arresting gumat site of work etc., as required and as directed by the engineer-in-charge, complete. All Labour and materials. |
| 338 | Supplying of CP angle cocks i.e., 15mm diaat site of work etc., as required and as directed by the engineer-in-charge complete. All Labour and materials. |
| 339 | Supplying of Taffalon tape for pipes and specials tighteningat site of work etc., as required and as directed by the engineer-in-charge complete. All Labour and materials. |
| 340 | Supplying of Shellack bottle for pipes and specials tighteningat site of work etc., as required and as directed by the engineer-in- charge complete.All Labour and materials. |
| 341 | Supplying of Brass spindles for taps & pillar cocksat site of work etc., as required and as directed by the engineer in charge complete.All Labour and materials. |
| 342 | Supplying of new "U" PVC pipes i.e., 15mm dia(each 3.05m length) at site of work etc., as required and as directed by the engineer-in- charge complete.All Labour and materials. |
| 343 | Supplying of new "U" PVC pipes I.e., 20mm dia(each 3.05m length) at site of work etc., as required and as directed by the engineer-in-charge, complete.All Labour and materials. |
| 344 | Supplying of new "U" PVC pipes i.e., 25mm dia(each 3.05m length) at site of work etc., as required and as directed by the engineer-in- charge, complete.All Labour and materials. |
| 345 | Supplying of FAPT -15 mm dia sockets at site of work etc., as required and as directed by the engineer-in-charge, complete.All Labour and materials. |
| 346 | Supplying of FAPT -20 mm dia sockets at site of work etc., as required and as directed by the engineer-in-charge, complete.All Labour and materials. |
| 347 | Supplying of FAPT -25 mm dia sockets at site of work etc., as required and as directed by the engineer-in-charge, complete. All Labour and materials. |
| 348 | Supplying of FAPT -15 mm dia Elbows at site of work etc., as required and as directed by the engineer-in-charge, complete.All Labour and materials. |
| 349 | Supplying of FAPT -20 mm dia Elbows at site of work etc., as required and as directed by the engineer-in-charge, complete.All Labour and materials. |
| 350 | Supplying of FAPT -25 mm dia Elbows at site of work etc., as required and as directed by the engineer-in-charge, complete.All Labour and materials. |
| 351 | Supplying of FAPT -15 mm dia Tees at site of work etc., as required and as directed by the engineer-in-charge, complete.All Labour and materials. |
| 352 | Supplying of FAPT -20 mm diaTees at site of work etc., as required and as directed by the engineer-in-charge, complete.All Labour and materials. |
| 353 | Supplying of FAPT -25 mm dia Elbows at site of work etc., as required and as directed by the engineer-in-charge, complete.All Labour and materials. |
| 354 | Supplying of MS pipe of 40 mm dia including loading and unloading and stacking at site of work etc., as required and as directed by the engineer-in- charge, complete. All labour and materials. |
| 355 | Supplying and transportation of treated drinking water in lorry /tankers including filling and delivary of water at site of work, crew charges fuel charges hire charges, waiting charges, hose pipes, taxes if any with all equipment charges etc, as required and as directed by engineer-in-charge complete, all hire and operational charges. (water will be supplied by the VPT). |
| 356 | Supplying the following jaquar specials and items at site of work etc., as required and as directed by the engineer-in-charge complete. All labour and materials- |
| 357 | Supplying of Two way taps model.no.35041 |
| 358 | Supplying of health faucet |
| 359 | Supplying of angel cock model.no.35053F |
| 360 | Supplying of pillar cocks model.no.35001 |
| 361 | Supplying of glass shelf model.no.AKP35771P |
| 362 | supplying of Towel rod model.no.1111NM |
| 363 | Supplying of soap dish model.no.18003 |
| 364 | Supplying of concealled stop cock |
| 365 | supplying of paper holder |
| 366 | Supplying of cp waste coupling |
| 367 | supplying and fixing concealed stop cock 12.7mmdia(1/2")indian make heavy duty seika/senior/nice or equivalent etc.as required and as directed by the EIC, complete.All labour and materials |
| 368 | Supplying of plain glass of 6mm thick at site of work including conveyence etc., as required and as directed by the engineer-in-charge, complete.All labour and materials |
| 369 | Supplying of Motor Truck for the transportation of all sorts of materials such as sand, gravel, metal, steel, cement, boulders, debris, furniture, water supply pumps and motors including fuel charges driver charges etc., as required and as directed by the engineer-in-charge complete.(payment will be made for number of hrs worked at site only) |
| 370 | Supply JCB (3D) earth mover for excavating, levelling and removing earth / debris etc., including fuel ,operatorcharges and incidental charges etc., as required and as directed by the engineer-in-charge complete. (Payment will be made for No.of hours worked at site only) . |
| 371 | Supplying of EX-200 excavator at site of work for excavation/levelling and removing debris etc., as directed by the EIC with fuel,operator charges,incidental charges, hire charges and transporting the equipment to the site of work.All labour and equipment and fuel and spares etc., as required and as directed by the engineer-in-charge, complete. (Payment will be made for No. of hours worked at site only) |
| 372 | Supplying of DOZER on hire for dozing the debris / earth at site of work including transportation of dozer to site of work, POL, tools and tackles and crew charges etc., as required and as directed by the engineer-in-charge, complete. (Payment will be made for number of Hours worked at site only) |
| 373 | Hire and operational charges of trailerincluding operator Charges, fuel etc., as required and as directed by the Engineer-in-charge, complete. |
| 374 | Hire and operational charges of 8/10-ton mobile crane including operator fuel etc., as required and as directed by the Engineer-in-charge, complete. |
| 375 | Supply of road roller diesel 10 t capacity on hire basis incuding transportation to site of work,hire charges,fuel and operator charges etc,as required and as directed by the Engineer-in-charge, complete.All L&M. |
| 376 | Hiring of SUV(Non A/C)(Tata-sumo/ Bolero/Travea or equivalent or higher version) of model 2018 or later including driver"s salaries and maintainence charges,hire and operational charges, etc., as required and as directed by the engineer-in-charge, complete. with 1800 km mileage per month. |
| 377 | Dismantling RCC/PCC to the required lines and levels by using mechanical equipment of jack ,hammer including necessary compressor equipment, cutting bits,fuel operator charges,tools etc., or any other equipment machinery and removing the debirs with a lead of 50m including cutting the reinforcement bars and stacking the useful materials, handing over the bars to stores etc., as required and as directed by the engineer-in-charge, complete. |
| 378 | Supplying and fixing venitian blinds of required size and shape including top frame and pulling Chain and bottom channel with all necessary accessories including removing the old frames and finishing with cement plastering or any other material as required and as directed by department authorities and making good the same including transport, lead, lift charges etc all together All labour and materials, complete |
| 379 | Removing C.C. Blocks in pavements carefully without damaging the blocks and reuse the same wherever necessary including removing the mortar joints around block and stacking them within a lead of 50 m. as required and as directed by the Engineer-in-charge, complete. |
| 380 | Supplying and spreading gravel or moorum for sub-base in layers not exceeding 150 mm compacted thickness compaction with power roller to the required density as per IRC at optimum moisture content including hire of roller, operational charges, tools and plant, watering etc., as required and as directed by the engineer-in-charge, complete. All labour and materials. (Payment will be made for the quantity of finished work based on levels only) |
| 381 | Supplying and stacking good earth, tank silt or alluvial soil at site (at desired points as direct by the Engineer-in-charge) good earth to be obtained from the approved source and measured in stacks and 20% deduction will be made for voids to arrive net quantity.etc., as required and as directed by the engineer in charge, complete.All labour and materials. |
| 382 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadamas per specification including premixing the materials with water at OMC inmechanical mix plant,carriage of mixed material by tipper to site,laying in uniform layer with paver in sub base /Base course on well prepared surface and compacting with vibratory roller to acheive the desired density etc,. as required and as directed by the EIC complete, All labour and material . |
| 383 | Providing Dry Lean Cement concrete 1:3:6 nominal mix (using 220 kg. of cement per m3 of finished concrete) using 20 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position and spreading in layers, compaction with power roller, finishing, curing etc., as required and as directed by the Engineer-in-charge complete. All labour and materials (W/C ratio shall be finalized by trial rolling at field, well in advance). |
| 384 | Supplying, stacking and spreading 12.50 mm and 6 mm granite metal in 60:40 ratio to the required lines and levels for bedding PCC blocks etc., as required and as directed by the engineer-in-charge, complete. All labour and materials. |
| 385 | Paving with cement concrete solid blocks of size 30 x 20 x 20 cm including laying the same to the required line and level on a bed of 12.50mm graded granite metal and grouting the 10mm thick joints with clean dry screened river or gedda sand and flushing with water using jet pump etc., including rolling with power roller as required and as directed by the Engineer-in-charge, complete. All labour and materials but excluding cost of 12.50 mm graded granite metal bed and cement concrete blocks. |
| 386 | Paving with cement solid blocks of size 30 x 20 x 15 cm including laying the same to the required line and level on a bed of 12.50 mm graded granite metal and grouting the 10mm thick joints with clean dry screened river or gedda sand and flushing with water using jet pump etc., including rolling with power roller as required and as directed by the Engineer-in-charge, complete. All labour and materials but excluding cost of 12.50mm graded granite metal bed and cement concrete blocks. |
| 387 | Paving with cement solid blocks of size 30 x 15 x 20 cm including laying the same to the required line and level on a bed of 12.50 mm graded granite metal and grouting the 10mm thick joints with clean dry screened river or gedda sand and flushing with water using jet pump etc., including rolling with power roller as required and as directed by the Engineer-in-charge, complete. All labour and materials but excluding cost of 12.50 mm graded granite metal bed and cement concrete blocks. |
| 388 | i) Providing tack coat with bitumen emulsion RS gradeOn normal bituminous surfaces @ 2.50 kg / 10 m2. as per IRC specification including scrapping the old surface, cleaning, spraying emulsion etc., as required and as directed by the engineer-in-charge, complete. All labour and materials but excluding cost of emulsion. |
| 389 | Preparation of sub-grade to the specified grade and camber, compaction with power roller, making good the undulations including excavating earth to an average of 22.5cm depth and disposal of surplus earth to a lead of 50 m including hire and operational charges of roller, tools, plant etc., as required and as directed by the engineer-in-charge, complete. |
| 390 | Supplying and laying pre-cast concrete kerbs of size 150 x 300 mm conforming to IS 5758 using C.C. 1:1½:3 nominal mix including jointing with C.M 1:3 etc., as required and as directed by the engineer-in-charge, complete.All labour and materials. |
| 391 | SIGNAGE SYSTEM: supplying and fixing road signage fixtures as per IRC Standards and specifications on finished black top surface and road kerbs including sign boards etc., as required and as directed by the engineer-in-charge, complete. All Labour and Materials. |
| 392 | Road studs |
| 393 | A)WARNING SINGS left hand curve/Right hand curve /GUARDED etc. |
| 394 | B)MANDATORY SINGS-Un Guarded |
| 395 | Thermo plastic road marking as per sec 803 of MORTH"s for speed brakers and road markers. |
| 396 | Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & diameters for - 304 Grade |
| 397 | Labour charges for Fabrication of stainless steel railing works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish |
| 398 | Providing cess @ 1% |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
