Bharat Sanchar Nigam Limited-BSNL has published Tender For Repairs To Toilets Of Staff Quarters By Replacing Water Supply Lines And Other Works At Ramagiri, Nalgonda. Submission Date for this Tender is 03-04-2024. Water Pipe Line Tenders in Hyderabad Telangana. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | 1) Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : |
| 2 | a) All kinds of soil |
| 3 | i) Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 4 | 2) Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 5 | a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 6 | 3) Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 7 | a) 250x16 mm |
| 8 | 4) Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 9 | a) 250x10 mm |
| 10 | 5) Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 11 | a) 100 mm |
| 12 | 6) Removing glass panes from windows and replacing them with new glass panes with putty and nails wherever necessary : float glass panes of thickness 4mm |
| 13 | a) For windows in ground floor and /or for windows which can be accessed from inside of the room / bolcony with a ladder. |
| 14 | b) for windows in upper floors (other than ground floor) up to 8 floors, fixing of glass panes with Jhoola arrangement. |
| 15 | 7) Cleaning of existing over head tank/ underground water storage tank by mechanical method of specified TANKCLEAN process in stages: |
| 16 | (a) Empty the tank/ sump and make it to near dry. (b) wash the tank internal surfaces and top of the tank with fresh water and clean/ rinse the inside surfaces of side walls, ceiling and floor surfaces perfectly by removing all scalling, fungus etc., with rotary jet mechanism. (c) Removing/ cleaning mud, silt, waste, sludge and garbage from the tankwith sludge pump/ vaccum cleaner and disposing outside the building. (d) After drying applt UV radiation with specified equipment in the tank for 15 minutes to kill the harmfull bacteria etc., complete all as per directions of the Engineer-in-charge. |
| 17 | (The rate includes filling of outlets of tank with cotton during cleaning marking of date of painting on the tanks and cleaning of all the dirt/ waste etc., from the terrace and submission of certificate from specialised agency). |
| 18 | 8) Repairing of existing MS windows at all floor levels including arranging welding machine at site and providing necessary pieces of MS sections, providing friction hinges, providing window locking arrangements and making window operatable complete as directed. (Cost includes all incidental materials required, all operations mentioned etc) |
| 19 | 9) Charges for minor Repairs to wooden panelled/flush doors / window setc., . Cost includes all labour for attending minor repairs like sides planing for proper functioning and refixing screws after attending necessary repairs etc., with necessary screws, nails etc., complete (Cost of wood will be paid separately, but i/c required screws ) - Wooden door / window/Cupboards |
| 20 | 10) Cleaning of canopy/ chajjas by removing leaves grass dust, rubbish and other deposited / accumulated materials etc including removal of blockages/ chockages of khurras/ spouts of terrace/chajjas etc by disposal of rubbish to the dumping ground out side periphery of the building. |
| 21 | a) Blocked chajas, in accessible canopy & like upto First floor level . |
| 22 | b) Blocked chajas, inaccessible canopy & like Above first floor level . |
| 23 | 11) Charges for Cleaning of terrace slab, rain water entry spouts, khurras/ depressions/ sunk slabs and surrounding areas etc., by removing leaves, silt, grass, dust, rubbish, small plants and other deposited / accumulated materials from terrace etc., for smooth flow of water including disposal of waste etc., complete as per the directions of Engineer-in-Charge. (entire Terrace of one building shall be measured as one unit for payment). |
| 24 | 12) Uprooting & removal of vegetation at walls/ roofs/ chajjas and floors/ drainage systems/ water supplying stream of the building/over head tanks or at all levels, any location and applying any special chemical to defective area to prevent vegetation growth and finishing the same with cement concrete/ mortar to match the surface of walls/ floors/ roofs., etc complete as per the directions of engineer-in-charge (cement concrete/ mortar to be paid in separate item.) (Uprooting of vegetation in each location will be measured as one job) |
| 25 | a) Up to floor two level |
| 26 | b) Above floor two level |
| 27 | 13) Providing and filling cement motar sanded grout mixed with Fosrock liquid water proofing compound in required quantity for grouting/ filling around the gaps of IWC, floor traps sides and inside traps including finishing the sides neately and grouting in holes at door bottoms etc., complete in the toilet rooms to fill the holes terrazo/ ceramic flooring tiles, around the W.C.pans, corners of rooms, floor trap openings after neatly cleaning/ scratching the joints etc., in all floors complete as per directions of Engineer-in-charge. (No. of quarters shall be measured for payment) |
| 28 | 14) Charges for making available the welding plant at site including to and from the shoap, providing necessary power supply arrangements, lugs etc., complete as per the direction of Engineer-in-charge. |
| 29 | 15) Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : |
| 30 | a) W.C. pan with ISI marked white solid plastic seat and lid |
| 31 | 16) Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. |
| 32 | 17) Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 33 | a) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 34 | 18) Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 35 | a) Rectangular shape 453x357 mm |
| 36 | 19) Providing and fixing PVC trap of self cleansing design with PVC grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 37 | a) 100 mm inlet and 75 mm outletfloor trap |
| 38 | 20) Removing the damaged sanitary and water supply fittings and replacing them with new fittings including necessary white lead/ lead wool etc complete as directed by the Engineer - in - charge. |
| 39 | a) P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete - 10 litre capacity - White |
| 40 | b) Solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid. |
| 41 | c) P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete - Semi rigid pipe : |
| 42 | i) 32 mm dia. |
| 43 | d) PTMT Waste Coupling of approved brand for wash basin and sink, of approved quality and colour. |
| 44 | i) 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 45 | e) Unplasticised PVC connection pipe 15 mm nominal dia and 45 cm long with brass unions : |
| 46 | f) PTMT bib cock 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. of approved quality and colour. |
| 47 | g) PTMT stop cock 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. of approved quality and colour. |
| 48 | h) PTMT pillar cock 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. of approved quality and colour . |
| 49 | i) PTMT grating 100 mm nominal dia. Circular type. of approved quality and colour. |
| 50 | j) PTMT shower rose - 15mm nominal bore |
| 51 | 21) Providing and fixing at all floors Type B - SWR grade uPVC pipes of approved make including all fittings such as plain / door bends, tees, elbows, equal or unequal junctions, heel rest sanitary bends, collars etc.( except floor traps/P traps) confirming to IS13592, IS 14735, including jointing with solvent and providing necessary supports, clamps/MS brackets at specified intervals. The joints of pipe and fittings shall be of drip seal jointing in exposed areas like in shafts etc. and pasted type (solvent ) for all other locations all complete and as per directions of Engineer - in - charge. MS brackets shall be paid separately |
| 52 | a) 75 mm |
| 53 | b) 100 mm |
| 54 | 22) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 55 | a) 20 mm nominal outer dia. Pipes. |
| 56 | b) 25 mm nominal outer dia .Pipes. |
| 57 | 23) Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 58 | a) 20 mm nominal bore |
| 59 | b) 25 mm nominal bore |
| 60 | 24) Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : |
| 61 | a) 100 mm diameter |
| 62 | b) 150 mm diameter |
| 63 | 25) Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : |
| 64 | a) 100 mm diameter S.W. pipe |
| 65 | b) 150 mm diameter S.W. pipe |
| 66 | 26) Cleaning of sewer lines, manholes etc.,at all depths. cost includes all labour for removing the sludge, silt, slush, waste etc., from the manholes and rodding the sewer lines by mobile sewer roding equipment from manhole to manhole to clear the blockage, including chokes in gully traps etc.and disposing the waste outside the compound etc., |
| 67 | 27) Cleaning of the choked Gully trap Chambers and sewer line upto next manhole from the water entry outlet point in drainage system using rodding,wire/cables etc., to remove all the waste, debris etc., including disposal etc., as per the directions of Engineer-in-charge |
| 68 | 28) Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
| 69 | a) With cement mortar 1:4 (1 cement : 4 fine sand). |
| 70 | 29) Supplying Structural steel work in single section, fixed with or without labou ,including cutting, hoisting, and applying a priming coat of approved steel primer all complete. |
| 71 | 30) Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 72 | 31) Providing and fixing mosquito mesh shutters to doors with standard frame work of Aluminium with required thickness, hinges, fittings and magnetic closures etc., all complete as per the directions of Engineer - in - charge. |
| 73 | 32) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. |
| 74 | (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 75 | a) 30 mm thick |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
