Tender For Maintenance Of Strong Room And Repair And Renovation Of Washrooms At Bishnah
Tender Value
1.30 Lakhs
Estimated cost
Bid Submission
01 Apr 2024
0 days left
EMD
2600
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bishnah → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance Of Strong Room And Repair And Renovation Of Washrooms At Bishnah Please Refer To Boq
BOQ
| Sl. No. | Item Description |
| 1 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 2 | White washing with lime to give an even shade. Old work (two or more coats) |
| 3 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and fixing specified board medium density exterior grade (Grade I) to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) :=9.19.1 Flat pressed 3 layer particle board or graded wood particle board IS:3087 (18mm thick) for closing ventilators |
| 6 | Brick work with common burnt clay (non-modular) bricks of classdesignation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 7 | 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 8 | Repair of rolling shutters including locking arrangement and closing of one no. rolling shutter by way of embedding angles in concrete flooring and welding the same with shutters including cost of labour and welding all complete Job (as per LMR) |
| 9 | Providing and fixing Mild steel sheets of 1.00 mm thickness for doors. |
| 10 | Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges with Stainless Steel screws etc. complete. 100x58x1.90 mm |
| 11 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : size 150x10 mm |
| 12 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. size 100 mm |
| 13 | Providing and fixing uplasticized PVC connection pipe with brass unions (45 cm length,15 mm nominal bore) |
| 14 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 15 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 (short nose) |
| 16 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizesrespectively. |
| 17 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 18 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. |
| 19 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 20 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Semi rigid pipe32 mm dia |
| 21 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. 20mm nominal outer dia pipes. |
| 22 | Engaging of fitter/ plumber for making requisite connections of pipes, and checking of connections, etc as per requirement at site. |
| 23 | Engaging of welder for welding of steel doors/ sheets including cost of welding material, carriages, labour, all complete job. |
| 24 | Engaging of labour for making removal of mulba, loading/ unloading, shifting of material, etc. as per requirement at site. |
| 25 | Carriage of material by mechanical transporting including loading /unloading and stacking at site |
| 26 | Sand and Stone aggregate for an avg. lead 10 KM MT |
| 27 | Bricks for avg. 10km lead |
AI Tender Summary
Tender Timeline
Mar 26, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedApr 01, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 01, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender