Tender For “Supply, Installation, Testing And Commissioning Of Lt Control Panel And Distribution Boards At Workshop And Administrative Building, Nmpa”. 01 Design, Fabrication, Supplying, testing and Commissioning of Free standing Floor mounting Outdoor LT Control Panel board made out of 2mm GI sheet power coated , 3ph, & N, 440 volts, 50Hz, with accommodate a) 400A, 50Ka, 415V, Four Pole on load Manual Changeover Switch-1No. b) 250A, 25ka, 4P MCCB-01 No c) 160A, 25kA, 4P MCCB-3 Nos. d) 100A, 25kA, 4P MCCB-4 Nos. e) 63A, 10KA, 4P MCB, C-Curve- 08 Nos. f) RYB Indicator Lamp, g) 240V AC-1set h) CT-400/5A-3Nos. i) 6A, SP MCB-2Nos. j) Digital Voltmeter: 1No 0-500V+Selector Switch k) Digital Ammeter-1No 0-400A+Selector Switch l) Digital Multifunction meter-1No. m) Spreader-6 nos 50x10mm copper bus bar with heat shrinkable color sleeves, internal wiring and making suitable foundation etc. complete. (Approximate Dimension : W=2400mm, H=2000mm, D=575mm) (As per Technical Specification, Annexure) 02 Providing and Fixing MS stand made of angular frame size 2.5mtrs Length x 0.4metrs width made of 50mmx50mm, 6mm thickness with suitable angular legs size. 01 No 03 Design, Fabrication, Supplying, testing and Commissioning of Wall mounted Distribution Panel made out of 1.5mm thickness AISI 304 Grade Stainless steel, 3ph, & N, 440 volts, 50Hz, with accommodate a)125A, 25Ka, 415V, Four Pole MCCB-1 No. b) 40A, C-type, 4P MCB-05 Nos. c) 25A, C-type, SP MCB-10 Nos. d) 20A, C-type, SP MCB- 10 Nos. e) 10A, C-type, SP MCB-10 Nos. e) 35sqmm CBT cable connectors-50 nos f) Din Rail- 2mtrs. 25x10mm copper bus bar with heat shrinkable color sleeves, internal wiring using 2.5sqmm and 4sqmm copper wires and wiring complete. etc. (Approximate Dimension : 800mm(W)X1000mm(H)X 300mm(D) (As per Technical Specification, Annexure-) 03 No’s 04 Releasing of old Wall mounted Distribution Panel and its internal wiring, MCB, MCCB, Connectors etc complete. 700mm(L)X700mm(W)X200mm(D) 02 No’s 05 Releasing of 3.5 Core x 400 sq.mm 1.1KV, XLPE, PVC extruded inner sheathed Armoured LT Al armoured cable from Old existing LT Feeder Pillar and relaying to Workshop new LT Control Panel via Compound wall by using necessary MS angular clamps. ( 3.5 Core x 400 sq.mm= 2 runs) (Approximate= 50 Mtrs) 02 Sets 05 Supplying and making end terminations of cable of size with suitable glands, crimping the lugs with supply, fixing of all required hardware’s complete, etc. a) 3.5 Core x 400 sq.mm 02 Sets
