Bharat Sanchar Nigam Limited-BSNL has published Tender For Miscellaneous Civil Repair And Maintenance Work E Buildings Staff Qtrsin Bsnl Compounds Pahariya Ba Varanasi ( Sh: Three Nos Work I.E. Day To Day Maintenance, Armo, Mainhole ). Submission Date for this Tender is 30-03-2024. Civil Work Tenders in varanasi Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
2 | a) Cement mortar 1:6 (1 cement : 6 coarse sand) |
3 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : |
4 | a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
5 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : |
6 | a) 20 mm dia (heavy type) |
7 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. |
8 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
9 | a) 250x16 mm |
10 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
11 | a) 200x10 mm |
12 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
13 | a) 125 mm |
14 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade with necessary screws etc. complete. |
15 | a) Twin rubber stopper |
16 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
17 | a) Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
18 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : |
19 | a) With cement mortar 1:4 (1 cement : 4 fine sand). |
20 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
21 | a) Float glass panes of thickness 4 mm. |
22 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial de-silting of manholes and de-chocking of sewer lines. De-chocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm dia for all depth. |
23 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
24 | a) Orissa pattern W.C. pan of size 580x440 mm |
25 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
26 | a) 10 litre capacity - White |
27 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
28 | a) White solid plastic seat with lid |
29 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
30 | a) Flat back wash basin of size 550x400 mm. |
31 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
32 | Semi rigid pipe |
33 | 32 mm dia |
34 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
35 | Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes. Weighing not less than 60 gms. |
36 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
37 | a) 15 mm dia. nominal bore |
38 | b) 20 mm dia. nominal bore |
39 | c) 25 mm dia. nominal bore |
40 | d) 32 mm dia. nominal bore |
41 | e) 50 mm dia. nominal bore |
42 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
43 | a) 20mm nominal bore. |
44 | b) 25 mm nominal bore |
45 | c) 32 mm nominal bore. |
46 | d) 50 mm nominal bore |
47 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
48 | a) 100 mm diameter |
49 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
50 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
51 | a) 15 mm nominal bore |
52 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore |
53 | a) 15mm nominal bore |
54 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. |
55 | a) 15 mm nominal bore with 45 cm length. |
56 | White washing with lime to give an even shade : |
57 | a) Old work (one or more coats) . |
58 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
59 | a) Old work (one or more coats) . |
60 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
61 | a) Two or more coats on old work. |
62 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
63 | a) One or more coats on old work. |
64 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
65 | a) 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) |
66 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : |
67 | a) Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : |
68 | (i) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
69 | Extra for depth for manholes |
70 | a) Size 90x80 cm |
71 | (i) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
72 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : |
73 | a) For pipes 100 to 250 mm diameter |
74 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : |
75 | a) All kinds of soil |
76 | (i) Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
77 | Providing and fixing SWR PVC pipes (pressure not less than 4kg/cm2)of approved brand and manufacture as approved by Engineer-in-charge ,for sewage flow, including jointing with seal ring , leaving 10 mm gap for thermal expansion, |
78 | (i)Single socketed pipes. |
79 | a) 150 mm diameter |
80 | Providing and fixing PVC moulded fittings/ accessories for SWR PVC pipesincluding jointing with seal ringleaving 10 mm gap for thermal expansion. |
81 | a) Bend 87.5° |
82 | (i) 150 mm bend |
83 | Providing and fixing 100 mm CP grating for gully trap. |
84 | Providing and fixing FTA/MTA for cpvc pipeline |
85 | a) 15 mm nominal bore. |
86 | b) 20 mm nominal bore. |
87 | c) 25 mm nominal bore. |
88 | d) 32 mm nominal bore. |
89 | e) 50 mm nominal bore. |
90 | Providing and fixing PTMT bib cock of approved quality and colour. |
91 | a) 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
92 | Providing and fixing PTMT stop cock of approved quality and colour. |
93 | a) 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
94 | Providing and fixing PTMT pillar cock of approved quality and colour . |
95 | a) 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
96 | Providing and fixing CP brass Ball cock of approved quality, colour and make complete with L.P./ H.P.H.D. plastic ball. |
97 | Repairing of leakage in main and branch water pipe lines of dia 25 to 40mm (external) as and when required i/c the cost of joining material such as cement, jute etc. |
98 | Repairing of wooden door/ window frames and shutters with part replacement of wood work wherever required after taking out the shutter i/c cost of wood replaced as per direction of Engineer-in-charge, repair at each location of shutter shall be treated as one job). |
99 | Repairing of Aluminium door/ window frame and shutter with required cleat screws after taking out the shutter i/c cost of labour etc. all complete as per direction of E-in-C. |
100 | Providing manual assistance for plumbing sewer, masonry & carpentry work which are not covered above and are not possibleto measure. |
101 | Providing Spandle for repairing of piller cock wherever required. |
102 | P/F C.P. brass waste Jali for sink or wash basin. |
103 | a) 32 mm dia |
104 | P/F PVC cover to over head PVC water storage tank i/c necessary nuts & bolts. |
105 | Cleaning of Manhole with connecting sewer line and disposal of malva out side compound etc all complete as per direction of E-in-C. |
106 | Providing unskilled labour for day to day maintenance purpose. |
107 | P/F PVC Cistern flush handle/ball valve/long bend Of required colour and shape. |
108 | P/F MS bracket 40x40x5mm of size 40 cm. for fixing of wash basin and making good the same. |
109 | Replacing damaged G.I. Jali in Jali doors/windows i/c cost of material & labour all complete as per direction of Engineer-in-charge. |
110 | Removal of chockage of floor/nahani trap, Ptrap, rain water pipe G.I. Supply lines & sanitary / drainage pipe linesetc. complete as per direction of E.-in-C. |
111 | Cartage of welding machine from shop to site and sending back from site to shop including hire charges all complete as per directions of the Engr. In charge. |
112 | Uprooting and cutting plants grown on the walls of buildings i/c dismentling brick work wherever required and making the same good complete as per directios of the Engineer in Charge. |
113 | Disposal of malba out of compound upto municipal dump by mechanical means i/c loading and unloading complete as per directios of the Engineer in Charge. |
114 | Providing services duringOffice hourssuch as dusting of table and chair of the offices, dusting and cleaning of alumiminium patitionmembers such as boards glasses etc,delivery of letters to other offices and post office, , Filling water in air coolers, and all other functions assigned from time to time as per need basis(Payment on monthly basis) |
115 | Applying cement slurry admixed with water proofing chemical such as tapecrete or equivalent in proportion as recommended by the manufacturer to damp portion of wall in two coats complete as per direction of engineer in charge |
116 | Providing and fixing scaffolding using wooden ballies and ropes for works such as uprooting of trees on backside of staff qtrs and office buildings and for fixing of glass all complete as per directions of E-in-C |
117 | Deduct for crediting to the contractor old unserviceable material obtained after dismantentling, |
118 | a) PVC stop cock, bib cock, pillar cock,cistern, PVC water tanks etc. |
119 | b) C.P. brass stop cock, bib cock. Pillar cock angle cock, Gate valve etc. |
120 | c) damaged Flush door shutter |
121 | d) Hydraulic door closer |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail