Lucknow Development Authority has published Tender For External Electrification Work Of Commercial Plots (Quads) Constructed Behind Plasio Mall In Cwg City Scheme.. Submission Date for this Tender is 05-04-2024. Electrification Work Tenders in lucknow Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | 11 KV RING MAIN UNIT Providing 11 KV, 630 amp, 21 KA for 3 sec, outdoor mounting Ring Main Unithaving hinged arc proof cable doors, cable termination from the front enclosed in robotically sealed/welded stainless steel tank having IP 67 degree of protection comprises of 11kV outdoor type non extensible CCV type Compact switchgear unit in SF6 enclosure having 2 No. 630 amp fault making type load break switches along with earthing switches and1 Nos. 630 amp vacuum circuit breaker in SF6 enclosure with Self powered numerical relay (IDMTL O/C + E/F ) as HT switchgear along with earth switch. (Make : ABB/ Schneider/Crompton ) |
| 2 | Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swgand inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.(PWD SOR-725(A)/2018) |
| 3 | Installation, testing and commissioning of11 KV Ring Main Unit complete with all interconnections, construction of foundation and masonry platform of suitable size in 1:4 Brick work and 1:2:4 cement conctere as per manufacturers specifications complete in all respects. |
| 4 | 11 KV CABLES Supply and laying of3 core standered aluminium conductor XLPE(Cross linked polyethylene)insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connectedwith earth conductor by clamps etc. (Make : Polycab / CCI / Havells/KEI) (i)240 sq. mm 3 core |
| 5 | Supply and making of heat shrinkable type Indoor end termination Kit of 11 KV XLPE cable.(Make : Dansen / 3 M / M-seal / Raychem) 240 sq. mm 3 core |
| 6 | Supply and making of heat shrinkable type Outdoor end termination Kit of 11 KV XLPE cable.(Make : Dansen / 3 M / M-seal / Raychem) 240 sq. mm 3 core |
| 7 | Supply of Decorative Zig Zag Street light pole of height approximate 11 mtr high pole with double arm at heights of 11 mtr and 9 mtr respectively, as shown in drawing. Total pole length of 11 mtr of section of 12.436 mm length of 113.5 x 113.5x6 mm for a total height of 11 mtr in accordance to the drawing, with lumnaire mounting at 11 mtr and 9 mtr respectively. Pole made of MS square pipe of nominal wall thickness 6 mm + 10 % as per IS 4923:1997 standard. The pole shall have inbuilt junction box weather proof flush door junction cover fixing arrangement for pole at 600 mm above the base plate. Junction chamber of pole to accomdate 6 Amp MCB heavy duty connector block installed on bakelite sheet for inslulation from pole body. The pole shall be made of square hollow section (SHS) of 113.5 x 113.5 x 6 mm + 10 % for zig zag arm along with a heavy duty base plte dimensions 300 * 300 * 20 mm thickness. 8 rigid supports to connect pole to base plate to insure stability of pole to foundation plate and pole strength. (Analysis Rate) |
| 8 | Supply and fixing of 2 metres high cage fabricated with 3 mm thick expanded metal fixed on 50 mm x 50 mm x 6 mm angle iron frame having vertical members spaced at 1 to 1.25 mts. and horizontal members spaced at 1mt. The vertical members shall be grouted in floor and horizontal members in the wall to a depth of 300 mm with ends forked. The cage shall have 2000mm x 1000mm size one leaf door with locking device having door frame fabricated with 35mm x 35mm x 6mm angle iron and 3mm expanded metal duly fixed with the cage member with hinge etc. the cage shall be painted with red oxide primer and synthetic enamel paint. The job includes all materials, labour T & P etc. for proper completion of work.(PWD-SOR-1142/2018) |
| 9 | Supply and fixing of LED street light fitting having die cast aluminium body and diffuser/ reflector with driver set suitable for 90watt. (100 luman per watt)Confirming to IP 66 protection complete in all respect. ENDURA PLUS of Havells or equivalent make approved in UPPWD .(PWd, SOR-1423/2018) |
| 10 | S\L of HDPE (DWC) pipe includind coupler for road crossing etc. (except for cable support on poles) at depth of 750mm below ground level for LT cable and 900mm below ground level for HT cable as cable carrier as per E/I (Make Dura – line or Reck) 50 mm (ID) |
| 11 | S/F of 40A. TPN capacity of automatic Street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 Series with contactors HRC fuses, isolating Switch metering instrument box with CTS etc. in case of TPN, Complete in all respect as per approval by E/Ic.(PWD, SOR-807-F/2018) |
| 12 | Supply and laying of 80mm dia G.I. "B" class pipe as cable carrier as per direction and approval of E/Ic.(PSR Rs 697.00-18%= 590.00) |
| 13 | S/F of 6 amp single pole MCB,Havells make all complite as per direction of E/Ic CAT- A(PWd, SOR-1002/2018) |
| 14 | cable trench Construction of cable trenches withbricks in cement mortal 1:4 (1 cement :4 coase sand) Base foundation concrete in 1:4:8 mix (1 cement :4 sand :8 graded stone aggregate 40 mm normal size) inside & topplastering of wall with 12 mm thick with cement mortal 1:3 ( 1 cement and including precast removable type RCC slab with 1:2:4(1 cement :2soarse sand and 4 gradedstone aggregate of 20 mm size) Including centering shuttering excvation refilling and disposal of surplus earth as directed all complete in all respect as per drawing and design as per direction by the E/ Ic(as per approved desig) |
| 15 | Supplyandlayingof aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. SIN. 501 |
| 16 | 16 sq. mm 4 core |
| 17 | 25 sq. mm 3-1/2 core |
| 18 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. SIN 504 |
| 19 | 16 sq. mm 4 core |
| 20 | 25 sq. mm 3-1/2 core |
| 21 | Deduct in item no. 501 (I) 501 (t) and 506 (a) to (f) when cables is passed through G.I./M.S. or Hume pipe in road crossing or along the wall. The cost of the G.I. pipe, hume pipe is to be extra when and where required. SIN 507 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
