Tender For Rate Contract For Composite Works (Mechanical And Electrical Works) For Development Of Different Type Of Cng Station At Bokaro Ga, Deoghar Ga And Koderma Ga In The States Of Bihar And Jharkhand, Koderma-Jharkhand

TDR : 43016639

Tender Notice
Corrigendum Details
BOQ

Expired

Koderma , Jharkhand

Tender Brief : Corrigendum : Tender For Rate Contract For Composite Works (Mechanical And Electrical Works) For Development Of Different Type Of Cng Station At Bokaro Ga, Deoghar Ga And Koderma Ga In The States Of Bihar And Jharkhand

Document Fees
Refer document

EMD
₹ 971000.0 /-

Tender Value
Refer document

Submission Date
06-05-2024

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	30-04-2024	Addendum-3	Date	06-05-2024
2	19-04-2024	Addendum-2	Date	29-04-2024
3	10-04-2024	Corrigendum-1	BOQ	18-04-2024

Name of Work: Rate Contract for Composite Works (Mechanical and Electrical Works) for development of different type of CNG station at Bokaro GA, Deoghar GA & Koderma GA in the States of Bihar and Jharkhand

Sl. No.	Item Description
1	GST % for the tender Please select the rate of GST in cell AY13. Rate selected shall be applicable for the entire BoQ.
2	Composite Works
3	Mechanical and Piping Works
4	SECTION-A SS TUBE and FITTING - SUPPLY, LAYING and TESTING
5	Laying, testing and commissioning of SS tubes along with fittings as per Technical Specification, Typical P and ID for type of CNG s tation and scope of work, handling, lifting, transportation from stores toCNG stations.
6	3/4inchOD X 0.095inch min Wall thk.SS TubeReferTS Section III - A
7	1/2inchOD X 0.083inch min Wall thk.SS TubeReferTS Section III - A
8	SUPPLY OF SS TUBES as per Technical Specification
9	3/4inchOD X 0.095inch min Wall thk.,Material SS316SS TubeReferTS Section III - A
10	1/2inchOD X 0.083inch min Wall thk.,Material SS316 SS TubeReferTS Section III - A
11	Supply of SS Fittings,ValvesQuick Connect Body and Stem
12	QRC of 3/8inch NPT , end connection 1/2inch Tube OD, for stem and 1/2inchNPTFfor body MaterialSS316Rated pressure 5000 PSIat 70degreeF Temperature0degreeF to 400degreeF
13	Plug
14	Size 1/2inch OD, Material SS316Rated pressure 5000 PSI at 70degreeF Temperature 0degreeF to 400degreeF
15	Size3/4inch OD, Material SS316Rated pressure 5000 PSI at 70degreeF Temperature 0degreeF to 400degreeF
16	Caps
17	Size 1/2inch OD, Material SS316Rated pressure 5000 PSI at 70degreeF Temperature 0degreeF to 400degreeF
18	Size3/4inch OD, Material SS316Rated pressure 5000 PSI at 70degreeF Temperature 0degreeF to 400degreeF
19	Union
20	Size3/4inch OD, Material SS316Rated pressure 5000 PSI at 70degreeF Temperature 0degreeF to 400degreeF
21	Size 1/2inch OD, Material SS316Rated pressure 5000 PSI at 70degreeF Temperature 0degreeF to 400degreeF
22	Reducing Union
23	Tube OD 3/4inch x Tube OD 1/2inch, Material SS316Rated pressure 5000 PSI at 70degreeF Temperature 0degreeF to 400degreeF
24	Equal Tee
25	Size 1/2inch OD x 1/2inch OD x 1/2inch OD, Material SS316Rated pressure 5000 PSI at 70degreeF Temperature 0degreeF to 400degre eF
26	Size3/4inch OD x3/4inch OD x3/4inch OD, Material SS316 Rated pressure 5000 PSI at 70degreeF Temperature 0degreeF to 40 0degreeF
27	Reducing Union Tee
28	3/4inch OD x 1/2inch OD x3/4inch OD, Material SS316 Rated pressure 5000 PSI at 70degreeF Temperature 0degreeF to 400degreeF
29	Tube End Connection
30	1/2inch Tube End and3/4inch OD with Ferrule Fitting, SS316Rated pressure 5000 PSI at 70degreeF Temperature 0degreeF to 400de greeF
31	Nut
32	3/4 inch OD, Material SS316 Rated pressure 5000 PSI at 70degreeF Temperature 0degreeF to 400degreeF
33	1/2inch OD, Material SS316 Rated pressure 6000 PSI at 70degreeF Temperature 0degreeF to 400degreeF
34	Front Ferrule
35	3/4inch OD, Material SS316 Rated pressure 5000 PSI at 70degreeF Temperature 0degreeF to 400degreeF
36	1/2inch OD, Material SS316 Rated pressure 5000 PSI at 70degreeF Temperature 0degreeF to 400degreeF
37	Back Ferrule
38	3/4inch OD, Material SS316 Rated pressure 5000 PSI at 70degreeF Temperature 0degreeF to 400degreeF
39	1/2inch OD, Material SS316 Rated pressure 5000 PSI at 70degreeF Temperature 0degreeF to 400degreeF
40	Male Connector
41	Size1/4inch NPTMx 3/8inch OD, SS316 Rated pressure 5000 PSI at 70degreeF Temperature 0degreeF to 400degreeF
42	Size 1/2inch NPTMx 3/8inch OD, SS316 Rated pressure 5000 PSI at 70degreeF Temperature 0degreeF to 400degreeF
43	Cross
44	3/4inch OD X 3/4inchX 3/4inch OD X3/4inch OD Material SS316 Rated pressure 5000 PSI at 70degreeF Temperature 0degreeF to 400 degreeF
45	SS Ball Valves, conforming to Technical Specification No. MEC/TS/05/62/048 for SS Ball Valves of following sizes, specifications as indicated below
46	2-Way Floating Normal Bore Ball Valve3/4inch
47	2-Way Floating Normal Bore Ball Valve 1/2inch
48	3-Way Trunnion Mounted, Reducer BoreBall Valve 1/2inch OD end Connection and1/4inch NPTFbottom end connection
49	Conductive Core Thermoplastic Hose
50	3/8inch ID Conductive Core Thermoplastic Hose for CNG Service with break away coupling 3 Meter
51	\"Supply , Laying, testing and commissioning of SS 304 Tubes along with isolation valves, reducers and fittings etc.as per Technical Specification, Typical schematic drg. for Ins. air line of CNG station and scope of workincluding handling, storage,lifting, trans portation upto CNG stations. Note Total no.offerrule fittings may be considered as one jointing ferrule at every 5.0 m \"
52	1/4inchOD X 0.035inch min Wall thk.SS TubeReferTS Section III - A
53	SECTION-B ERECTION OF MECH. EQUIPMENT
54	Handlingincluding lifting and transportation from Client\"s store within city toCNG stations and erecting in position, the foll owing equipmenteither on the foundation at Ground level or on roof at 3.5 m above ground level.Contractor\"s scope shall include supply of all material and accessories including but not limited to any fixtures, clamps, gasket, nut bolts, etc.
55	Cascade 4500/3000 L water capacity. Erection at + 4.0 M levelReferTS Section III - B
56	Cascade 4500/3000 L water capacity, Erection at + Ground levelRefer TS Section III - B
57	Dispenser Erection at + Ground Level
58	\"Note The quantities given above against individual items are indicative and shall not be considered to be binding.The quantities may in crease or decrease at site at the time of actual execution and as per the discretion of Owner/ Engineer-in-charge.The unit rate sh all be operated to work out the final payment due to Contractor.\"
59	\"SECTION-B.1 ERECTION OF MECH. EQUIPMENT TRANSPORTATION NOT REQUIRED \"
60	Handlingincluding lifting within CNG stationsand erecting in position, the following equipmenteither on the foundation at Grou nd level or on roof at 3.5 m above ground level.Contractor\"s scope shall include supply of all material and accessories including but not limited to any fixtures, clamps, gasket, nut bolts, etc.
61	Cascade 4500/3000 L water capacity. Erection at + 4.0 M levelReferTS Section III - B
62	Cascade 4500/3000 L water capacity, Erection at + Ground levelRefer TS Section III - B
63	Dispenser Erection at + Ground Level
64	\"Note The quantities given above against individual items are indicative and shall not be considered to be binding.The quantities may in crease or decrease at site at the time of actual execution and as per the discretion of Owner/ Engineer-in-charge.The unit rate sh all be operated to work out the final payment due to Contractor.\"
65	SECTION-C SUPPLY, ERECTION and COMMISSIONING OF MISCELLANEOUS ITEM
66	Supply, erection and commissioning of following miscellaneous items as per technical specification and at locationswithin the stat ionsas directed by EIC Fire fighting EquipmentsReferTS Section III - C
67	DCP -10 Kg
68	DCP -75 Kgtrolley mounted
69	CO2 – 4.5 Kgportable
70	Sand Bucket with stand and canopy4 Nos. on each stand
71	Wind Socks
72	SECTION-D SUPPLY AND INSTALLATION OF ABOVEGROUND STEEL PIPING AT CNG STATIONS.
73	SUPPLY OF ASSORTED PIPE, FITTINGS AND FLANGES
74	Complete work of supply of pipes, flanges and fittings including all taxes, duties, transportation and inspection charges but not li mited to, the following itemsin accordance with PMSpiping material specification , relevant specifications and drawings indicate d in scope of work indicated in SCC and instructions of Engineer-in-charge and as per all provisions of the CONTRACT DOCUMENT.Handli ng including lifting, transportation from Contractor Stores to CONTRACTOR\"s workshop for fabrication and/ or to work site for field fabrication and erection for all piping items supplied by Contractor.
75	Carbon Steel Pipe
76	Size Rating/ Schedule
77	4inch NB, BEASTM A106, Gr. BCharpy , Seamless, BE S80
78	2inch NB, BE ASTM A106, Gr. BCharpy , Seamless, BEXSXS
79	1inch NB, BE ASTM A106, Gr. B, Seamless, PEXSX S
80	3/4inch NB, BE ASTM A106, Gr. B, Seamless, PE S160 XS
81	Flanges
82	\"Weld NeckB-16.5, A105 Charpy , 125 AARH, RFEnd Thickness to match pipe thickness \"
83	Size Rating/ Schedule
84	4inch NB, RF 300
85	2inch NB, RF 300
86	Socket WeldedB-16.5, A105, 125 AARH, SW end to B16.5
87	1inchNB,RF 300
88	3/4inch NB RF300
89	Blind FlangesB-16.5, A105Charpy , 125 AARH, RF
90	Size Rating/ Schedule
91	4inch NB, RF 300
92	2inch NB, RF 300
93	Blind FlangesB-16.5, A105, 125 AARH, RF
94	1inchNB,RF 300
95	3/4inch NB RF300
96	Elbow
97	ELBOW, 90degree ElbowA234, Gr. WPBCharpy , B-16.9, 1.5D , BW
98	SizeRating/ Schedule
99	4inch NB S80
100	2inch NBXS
101	ELBOW, 45degree ElbowA234, Gr. WPBCharpy , B-16.9, 1.5D , BW
102	Size Rating/ Schedule
103	4inch NB S80
104	2inch NBXS
105	TeesSeamless
106	TEE, Equal / Reducing TeeA234, Gr. WPBCharpy , B-16.9, 1.5D , BW
107	Size Rating/ Schedule
108	4inchNB S80
109	2inchNB XS
110	4inchx 2inchNBS80 x XS
111	SockoletA105 ,SW,6000 ,MSS-SP 97
112	Size Rating/ Schedule
113	4inch x 1inchNBS40 x XS
114	4inch x3/4inch NBS40 x S160
115	2inch x 1inchNB XS x XS
116	2inch x3/4inch NBXS x S160
117	End CapsA 234 Gr. WPBCharpy , BW
118	Size Rating/ Schedule
119	4inch NBS80
120	ReducerA234 Gr. WPB, B.16.9
121	Size Rating/ Schedule
122	4inch NB x 2inch NBS80 x XS
123	\"Note iThe quantities mentioned above are tentative. iiFor all the supply items mentioned above, procurement shall be made as per specification after due approval of Engineer-in-charg e. \"
124	Supply of valves
125	Complete work of supplyof valves including all taxes,duties,transportation and inspection charges but not limited to ,the followin g items in accordance with relevant Specifications and relevant Data Sheets indicated inscope of work indicated in SCC, drawings, specification and instructions of EIC and as perall provisions of the CONTRACT DOCUMENT.
126	Flanged/ Welded ValvesFull Bore/ Reduced Bore
127	Plug Valves BW
128	Size Rating/ Schedule
129	2inch NBBW 300
130	Ball
131	SizeRating/ Schedule
132	4inch NBBW , FB300
133	2inch NBBW , FB300
134	2inch NBFE ,FB300
135	Sockolet Welded ValveBall Valve
136	SizeRating/ Schedule
137	1inch NB SW, FB 800
138	3/4inch NBSW, FB 800
139	Complete Carbon Steel aboveground Piping Work with painting including all fittings, flanges and supply of all required gaskets, ventflappers, studs bolts and nuts etc. as described under item 1.0 above
140	Carbon Steel PipeA 106, Gr. B, Seamless, B-36.10
141	Size Rating/ Schedule
142	4inch NB, BEASTM A106, Gr. BCharpy , Seamless, BES80
143	2inch NB, BE ASTM A106, Gr. BCharpy , Seamless, BEXS XS
144	1inch NB, BE ASTM A106, Gr. B , Seamless, PEXS XS
145	3/4inch NB, BE ASTM A106, Gr. B, Seamless, PE S160 XS
146	\"Note 1Pipe Specification and thickness may vary depending upon availability of pipe.No extra payment shall be made for this. 2All butt welded fittings end shall generally match with connecting pipe wall thickness. However, in case of misalignment, Contrac tor shall have to do end preparation without any extra cost. 3All coupling, nipples stud, bolts, nuts, gaskets and vent flapper etc. as required shall be suplied by contractor but no separatepayments shall be made as it is covered under erection rate.\"
147	RADIOGRAPHY
148	Performance of radiographic inspection by gamma radiation as per scope of work and as per specifications in piping of all types and thickness including providing/hiring of all necessary equipments, supply of all consumables, and whatever else even though not expre ssely mentioned but required to perform the work as per specifications and instructions of Engineer-in-Chargefull circle re-radiog raphy of the repaired joint and additional radiography necessitated due to poor performance of contractor\"s welder shall be carried out by the Contractor at his own cost and shall not be paid extra by Company .Radiographs shall be submitted to the Engineer-in-Ch arge for acceptance, whose decision shall be final and binding.
149	Size
150	4inch NB
151	2inch NB
152	\"Note iThe quantities mentioned above are tentative.\"
153	Aboveground erection of Valves
154	Handling including lifting and transportation from COMPANY\"s warehouse to CONTRACTOR\"S Stores and/or work site and installation of a ll types of valves, insulating joint, flow tee including assembly of valve accessories,if anyby bolting, threading or welding, s upply and insertion of gaskets, nuts and bolts, nipples, etc. at all elevations of pipe sleepers, supports or overhead on racks, equ ipments nozzle, skid and painting etc. supply of all consumables, manpower, equipment, etc. for completion of all works as per scopeof work and as per drawings, specifications and instructions of Engineer-in-charge including servicing/ cleaning of valve wherever requried.
155	Flanged/ Welded ValvesFull Bore/ Reduced Bore
156	Plug Valves BW
157	SizeRating/ Schedule
158	2inch NBBW 300
159	Ball
160	SizeRating/ Schedule
161	4inch NBBW , FB300
162	2inch NBBW , FB300
163	2inch NBFE ,FB300
164	Sockolet Welded ValveBall Valve
165	SizeRating/ Schedule
166	1inch NB SW, FB 800
167	3/4inch NBSW, FB 800
168	PRESSURE GAUGES
169	Supply, installation and calibration of pressure Gauges and their accessories inclusive of supply of necessary piping materials/tubi ngs alongwith all necessary valves and fittings, fabrication and installation of impulse lines/manifolds as per D. S. No. MEC/23H7/0 5/E5/I/001/DS-PG.
170	STRUCTURAL WORKS
171	Pipe Supports and Other Structures
172	Supply, fabrication and erection of all types of pipe supports like clamps, saddle, guide stops, cradles, turn buckles, anchors, T-p ostsstockade/ trestle and pipe bridge for overhead pipingframes for canopy, approach ladders and platforms, crossover, cable tra y supports, etc. including painting suitable for highly corrosive area as per specificationlabour and supervision and complete wor k as per drawings, specifications and instruction of Engineer-in-charge.Bolts, nuts, washers, PVC coated U-clamps etc. for support ing shall be supplied by the Contractor within the rates quoted.These items will not be measured and paid seperately .The work i s to be completed in all respect as per scope of work and specification.
173	NotesThe quantities indicated above are tentative estimated values and hence are approximate. Final payment will be made based on actual quantities to be certified by the Owner/Owner representative. The cost of MS boltspermanent and service , washers, electrod es, putty, gases, cost of straightening the raw materials, cutting of flats from plates and providing splices, paints, tools, plantsetc., as required for the work shall be deemed to be included in the quoted rates. All handling and transport charges of raw materi als and fabricated structures including double handling, as required, for completion of work in accrodance with time schedule, are d eemed be included in the quoted rates.
174	PLAIN CEMENT CONCRETE
175	Providing, laying in position, construction and handing over of PCC in all types of concrete works including levelling courses belowfoundations, mass concrete works, chambers, cable trench, under floors and any other locations which are not covered as part of r espective items of SOR , at all levels and locationsetc complete in all respects as per scope of work, detailed construction dra wings, technical specifications and direction of Engineer-in-charge.
176	aPCC M-151 2 4 [ 1 Cement2 coarse sand 4 stone aggregate 20 mm nominal size]
177	Note 1. Rate to include cost of all labour, tools,tackles, equipment, hire charges, supply of all materials such as minimum 43 grade cement, coarse sand and coarse aggregates, otherminor construction materials, shuttering, staging, shoring/strutting, finishing, etc. with all bye works and sundry works.2. To be read in conjunction with relevent clause of PJS.
178	Conversion of DBS to Online/Mother Station
179	Decommissioning of SS tubing, Dismentalling of SS tubing, providing connections with online compressor/cascade/dispenser as requiredincluding installation of fittings and relacement of damaged fittingssupply to be as per relevant SOR item, Retesting of alread y laid tubings, installation of valvessupply as per relevant SOR , providing as build PandID drawings, etc.completing all tubing /mechanical work to complete the conversion of DBS to Online station. Any fresh supply and laying of SS tubing to be paid separatelyas per relevant SOR item.
180	Disconnecting / reconnecting all air piping/tubing , loading, transportation and unloading of compressor at designated locaationwi thin GA boundary ,
181	Disconnecting all electrical connections with booster compressor/panel/other equipment, relaying/testing of used cables if required,disconnection of earthing grid from compressor/panel/other equipment and recoonection with online compressor, repair of earth elecr odes etc. Any fresh supply and laying of cable/GI strip/earthing electrod to be paid as per relevant SOR
182	Architectural Works
183	Supplying and Installing Mandatory Sign made of 4mm thick. ACMAlstrong/ Aludecor/ Alucobondsheets cladded on structural framewor k. Matter/Logo in Retro Reflective SheetingAvery / 3M / equ. Type XI DG3 Microprismetice as per ASTM D 4956-09 duly pasted on ACM in required size and shape, all complete with by works, as approved.
184	300mm X 600mm
185	ELECTRICAL WORKSSUPPLY
186	Design, engineering, manufacture, shop testing, supply includingpacking and forwarding, transportation, delivery at storage and fr om storage to site of power distribution boardPDBand Lighting Distribution BoardLDB
187	\"415 V, 30 KA single front Floor mounted type indoor PDB to receive input power at CNG Station consisting ofbus bar chamber, cablealley,complete with wiring, indication lamp, ammeter, voltmeter, MFMMulti Function Meteretc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliariesetc complete in all respects as specifie d in technical specification, data sheet and SLD no. MEC/--/05/E9/E/1081A and as per standard Specification No. MEC/TS/05/E9/076. Dual Incomer 125 Amp 4P MCCBwith Micro processor and based O/C,S/C and E/F RELASE with LSIG and Shunt trip with Electrical inste rlock Auto/Mannualby Power Contactors ,Start/Stop push button with adjustable NO/NC. Outgoing with 2 nos. 80 Amp TPN MCCBwith TM based O/C,S/C and E/F RELASE with U/V Protection for Booster feeder only Outgoing with HRC Fuses -2 nos. 32 Amp TPN MCB Outgoing with fuse 3 Nos. DP MCB 10 Amp with Timer 24HrsAuto/Mannual and with fuse 3 Nos. DP MCB 10 Amp without timer.\"
188	\"415 V, 30 KA single front Floor mounted type indoor PDB to receive input power at CNG Station consisting ofbus bar chamber, cablealley,complete with wiring, indication lamp, ammeter, voltmeter, MFMMulti Function Meteretc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliariesetc complete in all respects as specifie d in technical specification, data sheet and SLD no. MEC/--/05/E9/E/1081A and as per standard Specification No. MEC/TS/05/E9/076 . Dual Incomer 100 Amp 4P MCCBwith Micro processor and based O/C,S/C and E/F RELASE with LSIG and Shunt trip with Electrical inste rlock Auto/Mannualby Power Contactors ,Start/Stop push button with adjustable NO/NC. Outgoing with 2 nos. 63 Amp TPN MCCBwith TM based O/C,S/C and E/F RELASE with U/V Protection for Booster feeder only Outgoing with HRC Fuses -2 nos. 32 Amp TPN MCB Outgoing with fuse 3 Nos. DP MCB 10 Amp with Timer 24HrsAuto/Mannual and with fuse 3 Nos. DP MCB 10 Amp without timer.\"
189	\"415 V, 36 KA single front Floor mounted type indoor PDB to receive input power at CNG Station consisting ofbus bar chamber, cablealley,complete with wiring, indication lamp, ammeter, voltmeter, MFMMulti Function Meteretc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliariesetc complete in all respects as specifie d in technical specification, data sheet and SLD no. MEC/--/05/E9/E/1081A and as per standard Specification No. MEC/TS/05/E9/076 . Dual Incomer of 400 Amp 4P MCCBwith Micro processor and based O/C,S/C and E/F RELASE with LSIG and Shunt tripand 63A 4P MCCBwi th Micro processor and based O/C,S/C and E/F RELASE with LSIG and Shunt tripwith Electrical insterlock Auto/Mannualby Power Cont actors ,Start/Stop push button with adjustable NO/NC. Outgoing with - 2 nos. 400 Amp TPN MCCBwith TM based O/C,S/C and E/F RELASE Outgoing with HRC Fuses -2 nos. 32 Amp TPN MCB, 2 Nos 32 Amp TPN MCB Outgoing with fuse 3 Nos. DP MCB 10 Amp with Timer 24HrsAuto/Mannual and with fuse 3 Nos. DP MCB 10 Amp without timer.\"
190	\"415 V, 36 KA single front Floor mounted type indoor PDB to receive input power at CNG Station consisting ofbus bar chamber, cablealley,complete with wiring, indication lamp, ammeter, voltmeter, MFMMulti Function Meteretc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliariesetc complete in all respects as specifie d in technical specification, data sheet and SLD no. MEC/--/05/E9/E/1081A and as per standard Specification No. MEC/TS/05/E9/076 . Dual Incomer of 315 Amp 4P MCCBwith Micro processor and based O/C,S/C and E/F RELASE with LSIG and Shunt tripand 63A 4P MCCBwi th Micro processor and based O/C,S/C and E/F RELASE with LSIG and Shunt tripwith Electrical insterlock Auto/Mannualby Power Cont actors ,Start/Stop push button with adjustable NO/NC. Outgoing with - 2 nos. 250 Amp TPN MCCBwith TM based O/C,S/C and E/F RELASE Outgoing with HRC Fuses -2 nos. 32 Amp TPN MCB, 2 Nos 32 Amp TPN MCB Outgoing with HRC fuse 3 Nos. DP MCB 10 Amp with Timer 24HrsAuto/Mannual and with fuse 3 Nos. DP MCB 10 Amp without timer.\"
191	Floor mounted APFC panel of 40KVAR capacitor bank in steps of 4X2.5, 4X5, 10 and 20 capacitor of MIN 10 nos, consisting ofbus ba r chamber, cable alley, incoming FSU ,all outgoing feeder FSUsas specified in tender drg. no. MEC/-----/05/E9/E/1081B and as per s pecification no. MEC/TS/05/E9/076
192	Floor mounted APFC panel of 50KVAR capacitor bank in steps of 4X2.5, 4X5, 10 and 20 capacitor of MIN 10 nos, consisting ofbus ba r chamber, cable alley, incoming FSU ,all outgoing feeder FSUsas specified in tender drg. no. MEC/-----/05/E9/E/1081B and as per s pecification no. MEC/TS/05/E9/076
193	Floor mounted APFC panel of 10KVAR capacitor bank in steps of 4X2.5capacitor of 4 nos, consisting ofbus bar chamber, cable alley , incoming FSU ,all outgoing feeder FSUsas specified in tender drg. no. MEC/-----/05/E9/E/1081B and as per specification no. MEC/T S/05/E9/076
194	Outdoor type dust and weather proof sheet steel2 mm thickenclosed MCCB of following rating for mounting on wall or pedestal. 125 A, 415V, 3 Pole and Neutral AC-23 duty and suitable for termination of 3.5 x 95/50 sq.mm A2XFY cable on incomer terminals andoutgo ing terminals.
195	Outdoor type dust and weather proof sheet steel2 mm thickenclosed MCCB of following rating for mounting on wall or pedestal. 315 A, 415V, 3 Pole and Neutral AC-23 duty and suitable for termination of 3.5 x 120/95 sq.mm A2XFY cable on incomer terminals andoutg oing terminals.
196	Outdoor type dust and weather proof sheet steel2 mm thickenclosed MCCB of following rating for mounting on wall or pedestal. 400 A, 415V, 3 Pole and Neutral AC-23 duty and suitable for termination of 3.5 x 240/150 sq.mm A2XFY cable on incomer terminals andout going terminals.
197	Outdoor type dust and weather proof sheet steel2 mm thickenclosed MCCB of following rating for mounting on wall or pedestal. 100 A, 415V, 3 Pole and Neutral AC-23 duty and suitable for termination of 3.5 x 95/50 sq.mm A2XFY cable on incomer terminals andoutgo ing terminals.
198	Design, engineering,supply includingpacking and forwarding, transportation, delivery at storage, of the complete earthing and ligh tning protection system, earth electrodes/ pit, earth main ring, earthing of electrical equipments, instrument panels, field instrum ents, process equipments and pipes/ flanges including all associated civil work with all materialLike Bitumen coatingand labour as per specification and drawings approved by the company in with IS 3043.
199	Earth Pits- GI PIPE Electrode with 6 mm thick chequered plate cover
200	Earth Pits- Copper plate Electrode with 6 mm thick chequered plate cover
201	GI Strip50X6mm
202	GI Strip25X3mm
203	GI lightning rod 25 mm dia. 1800 mm long including supply of all hardware bare copper rope labour etc. complete as per approved draw ings, specifications and directions of Engineer-In-Charge.
204	Advance maintenance free earthing system with 3mtr earth electrode of low carbon steel with 250 micron copper coating with carbon ba sed backfill compound as per IS 3043/IEEE-80.
205	25 sq mm green fexible copper wire Approx 10mtrsalong with two nos Clamps harware etc shall be complete including mettalic cover b ox suitable for outdoor,size 400X400X200 in all respect to earthing/ground of LCV at two points.
206	Design, engineering,supply includingpacking and forwarding, transportation, delivery at storage, of the 1.1kV grade XLPE insulated , PVC sheathed, FRLS power and control cablesconforming to IS 7098 and specificationof following sizes in trenches/ excavated un der ground trench /trays, pulling through pipes and its proper sealing, cutting of paved area, roads etc.
207	3.5x 150 mm2 A2XFY
208	3.5x 120 mm2 A2XFY
209	3.5x 50 mm2 A2XFY
210	4x 25 mm2 A2XFY
211	4x10 mm2 2XWY
212	4x 6 mm2 2XWY
213	4x 2.5 mm2 2XWY
214	2x 1.5 mm2 2XWY
215	Supply includingpacking and forwarding, transportation, delivery at storage of lighting fixtures complete with mounting bracket, f lame proof/non flame proof, control gear box as per the type of fixture, lamps etc. including civil work with pipe inserts for cable s and connecting work, with all material and labour as per specifications, drawings and instruction of Engineer-in-charge. Work to b e completed in all respects.
216	Street lighting, integral flame proof well glass fixtureCMIFR approved for Zone-1/2 gas group IIA and IIBwith 100 W LED luminair e with flame proof control gear Model no. FLPW-1095 of Baliga make or equivalent
217	Supply of Integral flame proof Flood Light fixtureCMIFR approved for Zone-1/2 gas group IIA and IIBwith 100 LED luminaire Baligamake or equivalent
218	Supply of the underlights for the canopy as specified including lighting fixture flame proof enclosure for Bulk Head FittingBH/OA/ 124, 1 x LED, 150W of Sudhir make or equivalent, juction boxes etc. as requried.
219	Street lighting pole 6mtr high GI octagonal poleType BOP-6030 of Bajaj make or equivalentcomplete with bracket, GI clamps for fi xing flame proof control gear box as per standard drawingMEC/SD/05/E9/77/04and specificationMEC/TS/05/E9/077B .
220	Supply of point wiring as per details in construction drawing and specificationincludesPVC conduits in ceiling, complete wiring including flexible wireFR PVC , switch boxes and switchesANCHOR ROMA make or equivalent , Multi strand Flexible HR PVC insulatedcopper conductor wires/cables for following items-
221	Light Point
222	Surface/ recess mounted LED light fixrure with LED lamptype LCTL-18 -CDL of CG make or equivalent .
223	Industrial Flame proof fluorescent lamp/LED fitting with lamptype EXTL 240 of CG make or equivalent .
224	Flame ProofCMIFR approved12inch Exhaust Fan.0.25HP motor,1440 rpm.Preferred MakeBaliga, FCG, CGL, Prompt
225	Socket outlet5/15 Amp combinationof ANCHOR ROMA make or equivalent
226	Wall mounted fan with electronic regulator Energy efficent, 50W,etc complete in all respect for wall mounting
227	UPS SYSTEM
228	Design, supply, packing, forwarding, delivery by equipment supplier at site including commissioning spares as requiredof UPS syste ms as per specification, block diagram and following rating
229	3KVA, 230 V Single phase, 50 Hz, single industrial type, UPS system suitable for input Power supply voltage of 320V-460V- TPN184-2 65V/Ph, output 230 V +/- 1 percent, AC with Bypass supply, Battery Bank ,ACDBIncomer 32A DP MCB and Outgoing 2 Nos. 6A DP MCB an d 6 nos.10A DP MCBand 4.0 hrs. Battery backupVRLA, 12Vand battery capacity shall not be less than 18 KVAhwhere KVAH = batter y AH x 12 V x No. of Batteries . Main input transformer rating Shall not be Less than 9 KVA,As per Block diagram, Specification and Data sheet and shall be complete in all respect. .All interconnecting cables among UPS, Rectifier, battery stand, ACDB/DCDBetc20mtr shall be considered between battery bank and UPS panel, 20 mtr cable shall be considered between ACDB and UPS panel and any oth er cable which is not defined here but necessary for satisfactory operation of the UPS system .MakeM/s Hirel, M/s Dubas and M/s Sy nergy Systems
230	Supply of following sizes ofHDPE Pipein required length ,supply of clamps, small iron structures, spacersplugs, sealent etc. a nd materials complete as per approved drawingsand directions of Engineer-In-Charge.
231	50 mm NB
232	100 mm NB
233	Supply of following Hot Dip Galvanized Ladder/Perforated Typecable traysas per IS 2629including bends, tee, crosses,horizontaland vertical splices along with cable tray cover Wherever required for Asthetic look etc. as required including supply of all G.Ihardwares, all labour and material as required as per standard drawings, specification and direction ofEngineer-in-charge. Perfor ated type, made from 50mm height and 2.5 mm thick sheet steel and galvanized86 micronsof following sizes.
234	150mm wide
235	300mm wide
236	Erection Material
237	Supply of MS base frame support for switch gear and bracket for misc. electrical equipment,cable tray support out of roled MS sectio n,pipes,plates etc including welding, bolting, reveting, supply of necessary anchor bolts and grouting etc supply of paints applyingone coat of anti rust primer two finish coats of approved synthetic enamel paints including bracking walls, floors etc for structur e as required including supply of all GI hardware materials including all labour and materials complete as required and the directio n of Engineer-in-charge.
238	For Mother Station Gas Engine
239	For Mother Station Motor
240	For ON-LINE Motor
241	For DBS Motor
242	Supply of the following including the supply of necessary clamp, bolts, rawl plugs etc. breaking and making good of walls, if requir ed , and including all labour and materials complete as per directions of Engineer-In-Charge, applicable standards and Indian Electr icity rules.
243	Shock hazard charts complete with frame and glass
244	First Aid Boxes
245	Carbon-di-oxide CO2type fire extinguisher 4.5 Kg capacity Complete with gunmetal valve conforming to IS 3224 With ISI mark , Dis charge horn with bend and wall fixing Bracket With Mfg. Test certificate
246	Caution boardsDanger, High Volatageincluding supply of necessary clamps, bolts and other hardware.
247	Single Line Diagram complete in glass frame. Size 600X800mm
248	Supply ofInsulating Mats 11kV gradeas per IS 15652 - 2006of 1000mm width, required for maintenance of electrical equipment in substation as required including cutting to required shape in running length and including all labour and materials etc. complete an d as per directions of Engineer-In-Charge as per applicable Indian or International standards and Indian Electricity Rules.
249	Supply of electrical accessories including, cable tags, cable tie ,Flexible pvc conduit,cable marker, nickle plated lugs, double com pressed brass cable glands,brass adaptar/reducers/nipples, fixing of metallic anchor fasteners for supporting of cable trays and mis c. electrical switchgear including all labour and materials complete as required and as per directions of Engineer-In-Charge.
250	For Mother Station Gas Engine
251	For Mother Station Motor
252	For ON-LINE Motor
253	For DBS Motor
254	Telephone and LAN
255	Supply of telephone sockets Piano reed Typein recess PVC conduit including PVC conduit,telephone socket,cable,accessories etc asrequired.
256	Supply of LAN sockets in recess PVC conduit including PVC conduit,telephone socket,cable,accessories etc as required.
257	Supply of 2 pairs,0.61mm,Telephone Cable/Wire, includingaccessories etc as required.
258	Supply of UTP cableCAT 6 , Make D Link/Amp/Lucent
259	ELECTRICAL WORKSERECTION
260	Erection, Testing and Commissioning of power distribution boardPDBand Lighting Distribution BoardLDB
261	\"415 V, 30 KA single front Floor mounted type indoor PDB to receive input power at CNG Station consisting ofbus bar chamber, cablealley,complete with wiring, indication lamp, ammeter, voltmeter, MFMMulti Function Meteretc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliariesetc complete in all respects as specifie d in technical specification, data sheet and SLD no. MEC/--/05/E9/E/1081A and as per standard Specification No. MEC/TS/05/E9/076 . Dual Incomer 125 Amp 4P MCCBwith Micro processor and based O/C,S/C and E/F RELASE with LSIG and Shunt trip with Electrical inste rlock Auto/Mannualby Power Contactors ,Start/Stop push button with adjustable NO/NC. Outgoing with 2 nos. 80 Amp TPN MCCBwith TM based O/C,S/C and E/F RELASE with U/V Protection for Booster feeder only Outgoing with HRC Fuses -2 nos. 32 Amp TPN MCB Outgoing with fuse 3 Nos. DP MCB 10 Amp with Timer 24HrsAuto/Mannual and with fuse 3 Nos. DP MCB 10 Amp without timer.\"
262	\"415 V, 30 KA single front Floor mounted type indoor PDB to receive input power at CNG Station consisting ofbus bar chamber, cablealley,complete with wiring, indication lamp, ammeter, voltmeter, MFMMulti Function Meteretc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliariesetc complete in all respects as specifie d in technical specification, data sheet and SLD no. MEC/--/05/E9/E/1081A and as per standard Specification No. MEC/TS/05/E9/076. Dual Incomer 100 Amp 4P MCCBwith Micro processor and based O/C,S/C and E/F RELASE with LSIG and Shunt trip with Electrical inste rlock Auto/Mannualby Power Contactors ,Start/Stop push button with adjustable NO/NC. Outgoing with 2 nos. 63 Amp TPN MCCBwith TM based O/C,S/C and E/F RELASE with U/V Protection for Booster feeder only Outgoing with HRC Fuses -2 nos. 32 Amp TPN MCB Outgoing with fuse 3 Nos. DP MCB 10 Amp with Timer 24HrsAuto/Mannual and with fuse 3 Nos. DP MCB 10 Amp without timer.\"
263	\"415 V, 36 KA single front Floor mounted type indoor PDB to receive input power at CNG Station consisting ofbus bar chamber, cablealley,complete with wiring, indication lamp, ammeter, voltmeter, MFMMulti Function Meteretc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliariesetc complete in all respects as specifie d in technical specification, data sheet and SLD no. MEC/--/05/E9/E/1081A and as per standard Specification No. MEC/TS/05/E9/076 . Dual Incomer of 400 Amp 4P MCCBwith Micro processor and based O/C,S/C and E/F RELASE with LSIG and Shunt tripand 63A 4P MCCBwi th Micro processor and based O/C,S/C and E/F RELASE with LSIG and Shunt tripwith Electrical insterlock Auto/Mannualby Power Cont actors ,Start/Stop push button with adjustable NO/NC. Outgoing with - 2 nos. 400 Amp TPN MCCBwith TM based O/C,S/C and E/F RELASE Outgoing with HRC Fuses -2 nos. 32 Amp TPN MCB, 2 Nos 32 Amp TPN MCB Outgoing with fuse 3 Nos. DP MCB 10 Amp with Timer 24HrsAuto/Mannual and with fuse 3 Nos. DP MCB 10 Amp without timer. \"
264	\"415 V, 36 KA single front Floor mounted type indoor PDB to receive input power at CNG Station consisting ofbus bar chamber, cablealley,complete with wiring, indication lamp, ammeter, voltmeter, MFMMulti Function Meteretc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliariesetc complete in all respects as specifie d in technical specification, data sheet and SLD no. MEC/--/05/E9/E/1081A and as per standard Specification No. MEC/TS/05/E9/076 . Dual Incomer of 315 Amp 4P MCCBwith Micro processor and based O/C,S/C and E/F RELASE with LSIG and Shunt tripand 63A 4P MCCBwi th Micro processor and based O/C,S/C and E/F RELASE with LSIG and Shunt tripwith Electrical insterlock Auto/Mannualby Power Cont actors ,Start/Stop push button with adjustable NO/NC. Outgoing with - 2 nos. 250 Amp TPN MCCBwith TM based O/C,S/C and E/F RELASE Outgoing with HRC Fuses -2 nos. 32 Amp TPN MCB, 2 Nos 32 Amp TPN MCB Outgoing with HRC fuse 3 Nos. DP MCB 10 Amp with Timer 24HrsAuto/Mannual and with fuse 3 Nos. DP MCB 10 Amp without timer.\"
265	Floor mounted APFC panel of 40KVAR capacitor bank in steps of 4X2.5, 4X5, 10 and 20 capacitor of MIN 10 nos, consisting ofbus ba r chamber, cable alley, incoming FSU ,all outgoing feeder FSUsas specified in tender drg. no. MEC/-----/05/E9/E/1081B and as per s pecification no. MEC/TS/05/E9/076
266	Floor mounted APFC panel of 50KVAR capacitor bank in steps of 4X2.5, 4X5, 10 and 20 capacitor of MIN 10 nos, consisting ofbus ba r chamber, cable alley, incoming FSU ,all outgoing feeder FSUsas specified in tender drg. no. MEC/-----/05/E9/E/1081B and as per s pecification no. MEC/TS/05/E9/076
267	Floor mounted APFC panel of 10KVAR capacitor bank in steps of 4X2.5capacitor of 4 nos, consisting ofbus bar chamber, cable alley , incoming FSU ,all outgoing feeder FSUsas specified in tender drg. no. MEC/-----/05/E9/E/1081B and as per specification no. MEC/T S/05/E9/076
268	Outdoor type dust and weather proof sheet steel2 mm thickenclosed MCCB of following rating for mounting on wall or pedestal. 125 A, 415V, 3 Pole and Neutral AC-23 duty and suitable for termination of 3.5 x 95/50 sq.mm A2XFY cable on incomer terminals andoutgo ing terminals.
269	Outdoor type dust and weather proof sheet steel2 mm thickenclosed MCCB of following rating for mounting on wall or pedestal. 250 A, 415V, 3 Pole and Neutral AC-23 duty and suitable for termination of 3.5 x 120/95 sq.mm A2XFY cable on incomer terminals andoutg oing terminals.
270	Outdoor type dust and weather proof sheet steel2 mm thickenclosed MCCB of following rating for mounting on wall or pedestal. 400 A, 415V, 3 Pole and Neutral AC-23 duty and suitable for termination of 3.5 x 240/150 sq.mm A2XFY cable on incomer terminals andout going terminals.
271	Outdoor type dust and weather proof sheet steel2 mm thickenclosed MCCB of following rating for mounting on wall or pedestal. 100 A, 415V, 3 Pole and Neutral AC-23 duty and suitable for termination of 3.5 x 95/50 sq.mm A2XFY cable on incomer terminals andoutgo ing terminals.
272	Erection, Testing and Commissioning of 415V/240V lighting/power panels, Surface/Recess mounting type in weather/flame proofwith hi nged coversheet steel enclosure of approved make having 4 Pole MCCB LSIG /RCCBMCB + ELCBas incoming andSP/DP/TP MCB9KA typ efor out going circuit complete with wiring,indication lamp, ammeter etc including all labour and materials as per specification a nd the direction of Engineer-in-charge.
273	Earth Pits- GI PIPE Electrode with 6 mm thick chequered plate cover
274	Earth Pits- Copper plate Electrode with 6 mm thick chequered plate cover
275	GI Strip50X6mm
276	GI Strip25X3mm
277	GI lightning rod 25 mm dia. 1800 mm long including supply of all hardware bare copper rope labour etc. complete as per approved draw ings, specifications and directions of Engineer-In-Charge.
278	Advance maintenance free earthing system with 3mtr earth electrode of low carbon steel with 250 micron copper coating with carbon ba sed backfill compound as per IS 3043/IEEE-80.
279	25 sq mm green fexible copper wire Approx 10mtrsalong with two nos Clamps harware etc shall be complete including mettalic cover b ox suitable for outdoor,size 400X400X200 in all respect to earthing/ground of LCV at two points.
280	Laying, termination,glanding, testing of the 1.1kV grade XLPE insulated, PVC sheathed, FRLS power and control cablesconforming to IS 7098 and specificationof following sizes in trenches/ excavated under ground trench /trays, pulling through pipes and its prope r sealing, cutting of paved area, roads etc.
281	3.5x 150 mm2 A2XFY
282	3.5x 120 mm2 A2XFY
283	3.5x 50 mm2 A2XFY
284	4x 25 mm2 A2XFY
285	4x10 mm2 2XWY
286	4x 6 mm2 2XWY
287	4x 2.5 mm2 2XWY
288	2x 1.5 mm2 2XWY
289	Erection, Testing and Commissioning of lighting fixtures,Pole complete with mounting bracket, flame proof/non flame proof, control g ear box as per the type of fixture, lamps etc. including civil work with pipe inserts for cables and connecting work, with all mater ial and labour as per specifications, drawings and instruction of Engineer-in-charge.Work to be completed in all respects.
290	Street lighting, integral flame proof well glass fixtureCMIFR approved for Zone-1/2 gas group IIA and IIBwith 72 W LED luminairewith flame proof control gear Model no. FLPW-1095 of Baliga make or equivalent
291	Integral flame proof Flood Light fixtureCMIFR approved for Zone-1/2 gas group IIA and IIBwith 72 W LED luminaire Baliga make or equivalent
292	Underlights for the canopy as specified including lighting fixture flame proof enclosure for Bulk Head FittingBH/OA/124, 1 x LED, 150W of Sudhir make or equivalent, juction boxes etc. as requried.
293	Street lighting pole 6mtr high GI octagonal poleType BOP-6030 of Bajaj make or equivalentcomplete with bracket, GI clamps for fi xing flame proof control gear box as per standard drawingMEC/SD/05/E9/77/04and specificationMEC/TS/05/E9/077B .
294	Erection, testing and Commissioning of point wiring as per details in construction drawing and specificationincludesPVC conduitsin ceiling, complete wiring including flexible wireFR PVC , switch boxes and switchesANCHOR ROMA make or equivalent , Multi str and Flexible HR PVC insulated copper conductor wires/cables for following items-
295	Light Point
296	Surface/ recess mounted LED light fixrure with LED lamptype LCTL-18 -CDL of CG make or equivalent .
297	Industrial Flame proof fluorescent lamp/LED fitting with lamptype EXTL 240 of CG make or equivalent .
298	Flame ProofCMIFR approved12inch Exhaust Fan.0.25HP motor,1440 rpm.Preferred MakeBaliga, FCG, CGL, Prompt
299	Socket outlet5/15 Amp combinationof ANCHOR ROMA make or equivalent
300	Wall mounted fan with electronic regulator Energy efficent, 50W,etc complete in all respect for wall mounting
301	UPS SYSTEM
302	Erection, Testing and Commissioning by equipment manufacturer at site including commissioning spares as requiredof UPS systems as per specification, block diagram and following rating
303	\"3KVA, 230 V Single phase, 50 Hz, single industrial type, UPS system suitable for input Power supply voltage of 320V-460V- TPN184- 265V/Ph, output 230 V +/- 1 percent, AC with Bypass supply, Battery Bank ,ACDBIncomer 32A DP MCB and Outgoing 2 Nos. 6A DP MCB a nd 6 nos.10A DP MCBand 4.0 hrs. Battery backupVRLA, 12Vand battery capacity shall not be less than 18 KVAhwhere KVAH = batte ry AH x 12 V x No. of Batteries . Main input transformer rating Shall not be Less than 9 KVA,As per Block diagram, Specification andData sheet and shall be complete in all respect. MakeM/s Hirel, M/s Dubas and M/s Synergy Systems.All interconnecting cables amon g UPS, Rectifier, battery stand, ACDB/DCDBetc20 mtr shall be considered between battery bank and UPS panel, 20 mtr cable shall b e considered between ACDB and UPS panel and any other cable which is not defined here but necessary for satisfactory operation of the UPS system .\"
304	Erection of following sizes of HDPE Pipe including bend route as required length ,clamps, small iron structures, spacersplugs, sea lent etc. and materials complete as per approved drawingsand directions of Engineer-In-Charge.
305	50 mm NB
306	100 mm NB
307	Erection, Testing and Commissioning of following Hot Dip Galvanized Ladder/Perforated Typecable traysas per IS 2629including b ends, tee, crosses,horizontal and vertical splices along with cable tray cover Wherever required for Asthetic look etc. as require d including all G.I hardwares, all labour and material as required as per standard drawings, specification and direction ofEnginee r-in-charge. Perforated type, made from 50mm height and 2.5 mm thick sheet steel and galvanized86 micronsof following sizes.
308	150mm wide
309	300mm wide
310	Erection Material
311	Erection, Fixing and Commissioning of MS base frame support for switch gear and bracket for misc. electrical equipment,cable tray su pport out of roled MS section,pipes,plates etc including welding, bolting, reveting, necessary anchor bolts and grouting etc paints applying one coat of anti rust primer two finish coats of approved synthetic enamel paints including bracking walls, floors etc for structure as required including all GI hardware materials including all labour and materials complete as required and the direction of Engineer-in-charge.
312	For Mother Station Gas Engine
313	For Mother Station Motor
314	For ON-LINE Motor
315	For DBS Motor
316	Erection and Commissioning of the following including necessary clamp, bolts, rawl plugs etc. breaking and making good of walls, if required , and including all labour and materials complete as per directions of Engineer-In-Charge, applicable standards and Indian Electricity rules.
317	Shock hazard charts complete with frame and glass
318	First Aid Boxes
319	Carbon-di-oxide CO2type fire extinguisher 4.5 Kg capacity Complete with gunmetal valve conforming to IS 3224 With ISI mark , Dis charge horn with bend and wall fixing Bracket With Mfg. Test certificate
320	Caution boardsDanger, High Volatageincluding supply of necessary clamps, bolts and other hardware.
321	Single Line Diagram complete in glass frame. Size 600X800mm
322	Laying and pasting ofInsulating Mats 11kV gradeas per IS 15652 - 2006of 1000mm width, required for maintenance of electrical e quipment in substation as required including cutting to required shape in running length and including all labour and materials etc.complete and as per directions of Engineer-In-Charge as per applicable Indian or International standards and Indian Electricity Rul es.
323	Erection,Commissioning and fixing of electrical accessories including, cable tags, cable tie ,Flexible pvc conduit,cable marker, n ickle plated lugs, double compressed brass cable glands,brass adaptar/reducers/nipples, fixing of metallic anchor fasteners for supp orting of cable trays and misc. electrical switchgear including all labour and materials complete as required and as per directions of Engineer-In-Charge.
324	For Mother Station
325	For Bus Depo
326	For DBS/RO/ONLINE
327	For DCU
328	Telephone and LAN
329	Installation,testing and commissioning of telephone sockets Piano reed Typein recess PVC conduit including PVC conduit,telephonesocket,cable,accessories etc as required.
330	Installation,testing and commissioning of LAN sockets in recess PVC conduit including PVC conduit,telephone socket,cable,accessoriesetc as required.
331	Installation,testing and commissioning of 2 pairs,0.61mm,Telephone Cable/Wire, includingaccessories etc as required.
332	Installation,testing and commissioning of UTP cableCAT 6 , Make D Link/Amp/Lucent
333	All works relating to statutory approvals of the installation from competent authority like Electrical Inspectorate, CEA, DGMS, SEB etc. including carrying out of all required modifications in design / Manufacturer / Installation to meet the requirement of Indian Electricity rules and other statutory regulations in force, carrying out necessary paper work and liasion with the authorities to ob tain all necessary clearances for charging of installation as per relevant national standards for Mother CNG station. However the of ficial fees towards the approvals shall be reimbursed by the client.

Also Visit

Tenders

Jharkhand Tenders

Electrical Industry Tenders

Electrical Work Tenders

Electrical Maintenance Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Rate Contract For Composite Works (Mechanical And Electrical Works) For Development Of Different Type Of Cng Station At Bokaro Ga, Deoghar Ga And Koderma Ga In The States Of Bihar And Jharkhand, Koderma-Jharkhand

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Rate Contract For Composite Works (Mechanical And Electrical Works) For Development Of Different Type Of Cng Station At Bokaro Ga, Deoghar Ga And Koderma Ga In The States Of Bihar And Jharkhand, Koderma-Jharkhand

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us