Military Engineer Services-MES has published Tender For Repair / Maintenance Of Cranes, Travers In Esh Sheds And Other Storage Sheds Connected Items At Army Area Banar Under Ge Banar. Submission Date for this Tender is 16-04-2024. Cranes Tenders in Jodhpur Rajasthan. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 21-Mar-2024 | CorrigendumNo.01 | Other | 04-04-2024 |
2 | 04-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-04-2024 |
3 | 11-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-04-2024 |
Sl. No. | Item Description |
1 | M&L for periodic inspection/servicing, to be carried out in every six months, and making/keeping the cranes serviceable, for cranes/mono rail crane of 2 Ton/ 3 Ton/5 Ton/10Ton capacity installed in various sheds, including the following:- (i) LONG/CROSS TRAVERSE & HOIST MOTION (a) Checking Gear box oil level and filling with required oil and rectification of leakages if any. (Note: Gear Oil shall be measured and paid separately at supply only rates) (b)Checking of Assembly vibration (c)Brake adjustment (d)Checking of Long/cross traverse wheel for any noise/malfunctioning (e)Checking grease of Geared couplings, nut tightening and replacement of grease nipple. (f)Checking of oil in Hydraulic thruster brake, rectification of leakages if any and filling with required quantity of oil. (Note: Brake Oil shall be measured and paid separately at supply only rates) (g) Checking of electric motor connections, insulation resistance value. (h) Checking the cut-off at extreme ends with the limit switch. (j) Checking and greasing of plumber block. |
2 | (k) Checking of main bearings of the Rope Drum including greasing the same of hoist motion. (l) Checking wire rope for any damage & greasing the rope of hoist motion. (m) Adjustment of the rotary limit switch. (n) Checking of Bearing of the Hook and greasing the same of hoist motion. (ii)ELECTRICAL NETWORK (a) Checking the contactors for overheating or flashing. (b) General checking of contacts and connections. (c) Cleaning of control panels and checking of connections. (d) Checking of connections of VVVF drives/other drive, calibrating VVVF drive to get smooth movement & maximum efficiency / other drives for smooth functioning of the same. (e) checking the serviceability of cable including power/control cable, checking the service ability of cable carrier/cable trolleys ,adjusting as possible to get maximum free for movement of moving part/ Aprons of EOT cranes |
3 | (iii) DOWN SHOP LEAD (a) Checking the alignment and rectification. (b) Cleaning of the moving/sliding objects. (iv) GROUND MOTION CONTROL PANEL (a) Checking function ability of motion push buttons, function lock key operated switch, "ON &OFF" indication lamps Note: All expenditure for minor Material & Labour, T&P shall be included in quoted amount. 2. Major material shall be measured and paid separately under relevant items of sch "A" |
4 | Dismantling of existing reduction gear box with device for hoist /CT/ LT motion traverse for carry out replacement of following U/S Parts/Carry out Misc repair and refixing the gear box after checking alignment of brake drum & motor and motor & gear box, in existing position, complete all as specified and as directed by the Engr-in-Charge (a) Replacing the worn out shaft seals & bearing (b) Replacement of internal cover gasket, (c) Replacement of gear oil completely (Note: Gear Oil shall be measured and paid separately at supply only rates) (d) U/S Gear couplingwith nuts & bolts complete |
5 | Dismantling of existing Electrically operated hydraulically damped lever operated drum brake,415/230 volt,3 phase/ single phase, drum size 150 mm/100mm for controlling, braking & holding of plumber blocks of hoist /CT/ LT motion, carry out replacement of following U/S Parts/Carry out Misc repair and refixing the brake assembly after checking alignment of pulley, in existing position, of any capacity/power complete all as specified and as directed by the Engr-in-Charge (a) Replacing the worn out activator seals & bush/bearing (b) Replacement of internal cover gaskets, (c) Replacement / top up of Hydraulic oil/fluid (Note: Hydraulic Oil shall be measured and paid separately at supply only rates) (d) Checking the alignment of activator, levers & other mechanism. (e) Checking solenoid switch coil & insulation value, spring torque etc Note: 1.minor material such as seals, bush/bearing, cover gasket, nut bolt, washer, pins, lubricants, waste cloth shall be included in quatoted amount. |
6 | M&L for dismantling ,taking down at elevated height & servicing of squirrel cage flameproof TEFC motor, dismantling of brake drum, motor coupling etc, replacement of U/s bearing, seal, bushes, shaft, assembling & aligning the same after repair work for hoist, CT (cross travel) and LT (long travel) motion motor ,complete all as directed by Engr-in-Charge.Periodic checking, to be carried out in every three months, for making/keeping the cranes serviceable all as directed.re-assembling, Testing and Commissioning the following capacities. |
7 | (a) 0.5 HP to 2 HP |
8 | (b) 3 HP |
9 | (c) 5 HP |
10 | (d) 7.5HP |
11 | (e) 10HP |
12 | M & L for transporting to civil workshop, dismantling, rewinding the defective flame proof squirrel cage induction motor of single/ three phase, any make of any duty or any class of insulation, removing burnt out winding from stator / rotor, rewinding with suitable gauge of super enameled copper wire of approved make and replacinginsulation materials, varnishing with approved make, heating on electric oven till to get required insulation resistance value, replacing terminal block, re-assembling, Testing and Commissioning the following capacities. |
13 | (a) 0.5HPto2 HP |
14 | (b)3 HP |
15 | (c ) 5 HP |
16 | (d) 7.5HP |
17 | (e) 10HP |
18 | Supply and fix, in repairs, plummer block with bearing complete,suitable forLT/ CT motion of 5 Ton capacity EOT crane, complete all as specified and as directed by Engr-in-Charge. |
19 | M&L for replacement of flame proof push buttonpendent for all motions of crane including micro motion of2 to 10 Ton capacity EOT crane all as directed by Engr-in-Charge. |
20 | Supply only Gear oil 20W 90 OMD for top upping/replacing/taken on E/M store, all as specified and directed by Engr-in-Charge. |
21 | Supply only Transformer oil to hydraulic thruster brake,for top upping/replacing/taken on E/M store all as specified and directed by Engr-in-Charge. |
22 | Taking out unserviceable contactor of any make, model and capacityfrom the existing position and supply and fix 4 Pole contactor with NHD contacts 2 No+2NC, 32 Amp, Make BCH or equivelent in L&T/Schnieder |
23 | Taking out unserviceable contactor of any make, model and capacity from the existing position and supply and fix 3 Pole contactor with NHD contacts 2 No+2NC, 32 Amp, Make BCH or equilent in L&T/Schnieder |
24 | Supply and replacement of 3 pole power contactor following capacity |
25 | a) 3 TF 31,32,33with auxilary contact 2NO +2NC |
26 | b) ML 2 with auxilary contact 2NO +2NC |
27 | c) 9 Amps,AC3 MX type |
28 | Supply and replacement of over load relay direct mounted type 3 pole type, for ML type/ MX type contator following range |
29 | a) 6 to 10 Amps |
30 | b) below 6 Amps |
31 | c) 9 to 14 Amps |
32 | d) 13 to 21 Amps |
33 | Supply & replacement of single phase preventer make L&T. |
34 | Dismantling of existing U/s male-female combination of crane socketfrom existing position and replace the same withflame proof rotary switches 32 Amp with cable termination Box in LM-6 for 5 Ton capacity EOT crane and refixing the same all as directed by Engr-in-Charge. Make:Sudhir or Equivalent. |
35 | Supply and fix/lay, in any position, PVC insulated PVC sheathed fire retardant multistranded copper conductor cable, 4 core 6 sq mm size, with all lugs, thimbles, fixing arrangement etc. and testing after laying, including disconnecting & taking down of existing unserviceable cable from existing position, complete all as specified and as directed by Engr-in-Charge. |
36 | All as per item No. 16 above but 4 core 4 sq mm size, for hoist motion of 3Ton/5Ton EOT crane, complete all as specified and as directed by Engr-in-Charge. |
37 | Supply and fix, in repairs, PVC cable carrier /Cable Trolley, of size P-20 suitable for carrying cable of size up to 4 core 4 sq mm, complete all as specified and as directed by Engr-in-Charge. |
38 | Supply and fix, in repairs, PVC cable carrier /Cable Trolley, of size P-50 suitable for carrying cables of sizes up to 24 core 1.5 sq mm &4 Core 10 Sq mm, complete all as specified and as directed by Engr-in-Charge. |
39 | Supply and fix, in repairs, flame proof limit switch with lever, for LT/CT motion suitable for 3 Ton/5 Ton capacity EOT crane, complete all as specified and as directed by Engr-in-Charge. |
40 | Supply and fix, in repairs, flame proof limit switch, for hoist motion suitable for 3 Ton/5 Ton capacity EOT crane, complete all as specified and as directed by Engr-in-Charge. |
41 | Supply and fix, in repairs, flame proof limit switch suitable for electrically operated door ofcapacity 8Ton, complete all as specified and as directed by Engr-in-Charge. |
42 | Supply and fix, in repairs, brake liner of LT / CT/hoist brake drum, of 100mm/150mm dia and 8-10mm thickness, suitable for 3 Ton/5 Ton capacity EOT crane, complete all as specified and as directed by Engr-in-Charge. |
43 | S&F, in repairs, push button with NO + NC contact, switch spring type, in red/ green/ blue colour, suitable for 3 to 5 Ton capacity EOT crane, complete all as specified and as directed by Engr-in-Charge. |
44 | S&F, in repairs, Ground motion control panel locking switch (Emergency switch) , key operated , suitable for flame proof EOT crane, complete all as specified and as directed by Engr-in-Charge. |
45 | S&F,in repairs,Ground motion control panel "ON & OFF" indication lamp, LED type, GREEN/RED suitable for flame proof EOT crane, complete all as specified and as directed by Engr-in-Charge. |
46 | S&F, in repairs, MCB TPN 40 Amp rating, ‘C’ Series, 10 KA breaking capacity, suitable for 415 volts, 50 Hz, AC supply complete all as directed by Engr-in-Charge. |
47 | All as per item No. 27 above but TP, 32 Amp rating |
48 | S&F ungalvanised wire rope of 12 mm dia and 6x36 construction suitable hoist application for crane of 5 Ton capacity. Make: Usha Martin. |
49 | S&F ungalvanised wire rope of 6 mm diasuitable hanging application of crane ground movement control panelfor EOT crane including locking clamp etc . Make: Usha Martin |
50 | Supply & replacement of U/S flame proof surface mounted type integral/inbuilt control gear luminaries, with LED flameproof well glass fitting, heat resistant clear toughened glass IP 65, 40wattand other fixing accessories complete all as directed . |
51 | Supply, programme, testing & commissioning of AC drive, 5.5kW, V/F control ,input 3 phase, 415Volt,AC,out put 3 phase, 415Volt,AC for hoist control,CT/LT motor of EOT crane. |
52 | All as per item No. 32 but 7.5KW |
53 | S&F ungalvanised wire rope of 16 mm dia and suitable hoist application for crane of 10 Ton capacity. Make: Usha Martin |
54 | Supply and fix, in repairs, flame proof hydraulic thrustor brake with terminal encloser,maxium thrust up to 12kg,suitable stroke, suitable for 3 Ton/5 Ton capacity EOT crane, complete all as specified and as directed by Engr-in-Charge. |
55 | Supply and fix, in repairs, flame proof hydraulic thrustor brake pad,maxium thrust up to 12kg,suitable stroke, suitable for 3 Ton/5 Ton capacity EOT crane, complete all as specified and as directed by Engr-in-Charge. |
56 | Carry out load test on (Deflection) EOT Crane under 100% of full load capacity of crane on hoisting, long & cross travel, micro checking in performance including loading, unloading, Transportation, handling and returning the test load obtained from concerned unit for EOT crane capacity up to 5Ton EOT Crane (Mobile Crane, Truck & Trailer arranged by contractor) |
57 | All as per item no 37 above but 10 Ton capacity |
58 | M&L for allinging of lifting arrangment, Beam type,5Ton capacity,collecting the lifting arrengement from storage shed, transport to civil workshop, dismantling the lifting arrengement, allinging the beam by hydroulic press, rewelding the web with necessary reinforcment, refixing the chain with replacing weak link, replacing 4 nos hook locking arrengments, testing with full load for deflection, balancing test, painting with fire retartant paint complete all as directed |
59 | M&L for periodic inspection/ servicing of travel trolley of capacity 10 Ton. |
60 | (a) motor,gearbox with break assembly |
61 | (i) Inspecting the alignment of motor ,gear box assembly |
62 | (ii) Topping up gear oil in gear box, inspecting leakage, replacing oil seal if required, oil shall be measured and paid separately |
63 | (iii) Adjecting break, inspecting electric connection etc. |
64 | (iv) Inspecting of alignment of bull gear and pinion |
65 | (v) greasing all moving parts. |
66 | (b) limit Switch & control wiring |
67 | (i) Adjesting limit switch contacts. |
68 | (ii) inspecting control wiring connection & terminals |
69 | (iii) inspecting cable carring arrengement, |
70 | (c)drive and control panel |
71 | Checking of connections of drive, calibrating drive to get smooth movement & maximum efficiency / other drives for smooth functioning of the same. |
72 | (d) Rollers & wheels |
73 | (i) Geasing of roller bearing,door wheel bearing |
74 | Supply & replacement of roller shadder motor with integral electrical actuataded breaking system, manual operating system with chain,sutable gear box, motor capacity 1hp, 415 volt, 3 phase,suitable for shadder makerakash complete all as directed |
75 | Servicing of roller shadder motor with mechanism,manual operating system complete all as directed with following work |
76 | (a) motor,gearbox with break assembly |
77 | (i) Inspecting the alignment of motor ,gear box assembly |
78 | (ii) inspecting pandent with switchs |
79 | (iii) Adjecting break, inspecting electric connection etc. |
80 | (iv) Inspecting of alignment of bull gear and pinion |
81 | (v) greasing all moving parts. |
82 | (b) limit Switch & control wiring |
83 | (i) Adjesting limit switch contacts. |
84 | (ii) inspecting control wiring connection & terminals |
85 | Supply & replacement of remote operaing pandent with two switch, with control wire from top to operting positionsuitable for operating roller shadder motorcomplete all as directed. |
86 | Dismantling, takingdown and M&L new wheels of Long Travel/cross travel 160mm dia of Flame proof EOT crane 2 to 5 Ton capacity with galvanised coating including other necessary nut. bolts, T & P required at site for replacement of wheels complete as directed and site by Engr-in-charge including testing and commissioning. |
87 | Supply and fix Intrinsically Safe Relay card suitable for 10 TON EOT crane for smooth functioning of crane Make - Rank. |
88 | Supply and fix/lay, in any position, PVC insulated PVC sheathed fire retardant multistranded copper conductor cable,4 core 2.5 sq mm size, with all lugs, thimbles, fixing arrangement etc. and testing after laying, including disconnecting & taking down of existing unserviceable cable from existing position, complete all as specified and as directed by Engr-in-Charge. |
89 | Supply and fix wheel bearing for LT & CT side EOT crane up to 10 Ton capacity complete all as specified and directed by Engineer-in charge. |
90 | M&L for scrapping and cleaning with wire brushes the old paintedsteel surfacesofEOT crane of capacity up to 5 Ton, Long span upto 38 m with guide rails and all exposed parts of crane of any description including removing the oil and grease stains using cleaning agents and applying two coats of synthetic enamel paint (golden yellow) by spraying method complete all as specified and directed by Engineer-in charge. |
91 | S & F in replacement 440V/110V trasformer suitable for 2 ton to 10 ton EOT crane fix in panel complete all as specified and directed by Engr-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail