Military Engineer Services-MES has published Tender For Provision Of Furniture Store At Age(I) Naya Raipur At Naya Raipur Military Station. Submission Date for this Tender is 17-04-2024. Furnitures Tenders in raipur Chhattisgarh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 01-Apr-2024 | AMENDMENT TO UNIT OF SL ITEM NO 28 OF BOQ | Other | 10-04-2024 |
| 2 | 10-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-04-2024 |
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Excavationin trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out insoft/loose soilcomplete all as specified and directed. |
| 3 | Excavationin trenches, not exceeding 1.5m wide andexceeding 1.5mbut n exc 3.00 metre in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and exceeding 1.5mbut n exc 3.00 metre in depth for shafts, cesspits, manholes, pier holes, etc and getting out insoft/loose soilcomplete all as specified and directed. |
| 4 | Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 5 | Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed. |
| 6 | M&L for RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in Chajja all as specified and directed. |
| 7 | M & L 40mm thick PCC 1:2:4 damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. |
| 8 | M & L forMoorum / Red bajri filling in floors or pavings, laid in layers n.exc15 cm thick spread levelled and rammed incl watering etcall as specified & directed. |
| 9 | M&L hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for plinth protection/path complete all as specified and directed. |
| 10 | Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed. |
| 11 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surfaces of concrete, complete all as specified and directed. |
| 12 | Form worktosides of pillars, posts, struts, piers, columns etc , square or rectangular or polygonal, roughfinished surfaces of concrete, complete all as specified and directed. |
| 13 | M&L Form work to sides and soffits of beams, lintels etc, roughfinished surfaces of concrete, complete all as specified and directed. |
| 14 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick, flat, fair finished surfaces of concrete, complete all as specified and directed. |
| 15 | Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed |
| 16 | M&L for mild steel TMT bars10 mm dia and overas in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 17 | M&L for mild steel TMT bars 8 mm dia as in stirrups, spacers and binders for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 18 | M&L for providingRCC M-25 (Design Mix)using 20mm graded crushed stone aggregate, as in footing, foundation,beams, plinth beams, base for columns and mass concreteetc complete all as specifiedand directed. |
| 19 | M&L for RCC M-25 (Design Mix), using 20mm graded crushed stone aggregate,as in columns and pillars etc complete all as specifiedand directed. |
| 20 | M&L for RCC M-25 (Design Mix) using 20mm graded crushed stone aggregate, as in Beams, cantilevers, ressummers, lintels over 1.5m span concreteetc complete all as specifiedand directed. |
| 21 | M&L for RCCM-25 (Design Mix) using 20mm graded crushed stone aggregate, as in slabs supported on walls, beams and columnsetc complete all as specifiedand directed. |
| 22 | M&L for brick work with sub class "B"fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & directed. |
| 23 | Material & labour for brick work with sub class ‘B’ fly ashbricks, straight or curved on plan, exc. 6 metre mean radius built in CM(1:4)as in half brick thick walls complete all as specified and directed. |
| 24 | Supply onlyliquid water proofing compound ISI Marked,of make as approved by GE complete all as specified & directed. |
| 25 | M&L 15 mm thick rendering in CM 1:4 on external surfaces of walls & top surfaces of chajja/roof,mixed withliquid water proofing compound as per Manufacturer"s" instructions, surface finished even and smooth without using extra cement complete all as specified & directed. ( Note : Liquid water proofing compound will be measured and paid for separately against relevant item of BoQ) |
| 26 | M&L for rendering 12mm thick plaster on internal surfaces of wall in CM 1:6 on fair faces of brick or concrete surfaces finished smooth and even without using extra cement complete all as specified and as directed. |
| 27 | Material & labour for 5 mm thick plaster in CM 1:3 on ceiling surfaces, surfacesfinished even and smooth without using extra cement complete all as specified and directed. |
| 28 | M&L 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in floors finished even surface all as specified and directed. |
| 29 | M&L for Vitrified dark shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqmin floors etc., set and jointed in neat cement slurry and pointed in whiteor coloured cement to match with the shade of tile over andincluding 15mm thick screed bedin CM 1:6 completecomplete all as specified and as directed. |
| 30 | M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate for hold fast blocks, including necessary form work for rough finished surfaces etccomplete all as specified. |
| 31 | M&L for 100mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate assub basecomplete all as specified and directed. |
| 32 | M&L 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in path /plinth protection , finish even & smooth without using extra cementall as specified and directed. |
| 33 | Forming contraction (dummy) joint 65mm deep X 10mm wide filled with sealing compoung Grade "A", complete all as specified and directed. |
| 34 | Material & labour for preparation of new plastered surfaces of walls etcand applying two coats of cement base paint over a coat ofappropriate primercomplete all as specified & directed. |
| 35 | M&L for applying wall care putty 2mm thick and application of two coats of distemper, oil emulsion,white or tinted, on smooth and evensurfaces of wall complete all as specified and directed. |
| 36 | M&L 100mm thick Cement concrete Type B-2 (1:2:4) by using 40 mm graded aggregate as infloors finished even & smooth without using extra cement all as specified and directed. |
| 37 | M&LCement concrete Type E-2 (1:5:10) by using 40 mm graded aggregate as insub-base of floorscomplete all as specified and as directed |
| 38 | Forming Construction joint 30mm deep x 10mm wide filled with sealing compound of Grade "A" all as specified and direceted. |
| 39 | M&L for 10mm thick rendering over roof surfaces in CM (1:3) with using liquid water proofing compound as per manufacturer"s instructions, finished even and smooth without using extra cement complete all as specified & directed. Note: WPC shall be measured and paidfor separately as "Supply Only" under respective item of BOQ. |
| 40 | M&L for Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2, based solvent primer @ 0.3 Kg / Sqm complete all as specified and as directed. |
| 41 | M&L for Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm includingcleaning surfaces complete all as specified and as directed. |
| 42 | M&L for unrolled over the bitumen coated surface, 3mm thickspun bonded non-woven polyester reinforced APP modified water proofing membrane weighing not less than 3.0 Kg/Sqm with minimum side over lap of 100mm and end over lap of 150 mm shall be sealed by flame as per manufacturer"s instructions complete all as specified & directed. Note:- Suitable embedment of APP modified water proofing membrane shall be ensured into walls/parapet walls, special care shall be taken in laying APP modified water proofing membrane in situations such as drain/ expansion joints etc. |
| 43 | Supply & fixing pressed steel frames for doors with double rebates including necessary fixing lugs, hinges, lock strike plates etc complete,size of frame 125x60mm made out of 1.25mm MS sheets complete all as specified & directed. |
| 44 | M&L for factory made second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified & directed.Notes:- (i) glazing will be measured and paid for separately. (ii)Butt hinge will be measured and paid for separately as "Supply only". |
| 45 | Supply & fix 100mm size aluminium alloy handles cast type anodized complete all as specified & directed. |
| 46 | S&F aluminium tower bolts 150mm long, of extruded section complete all as specified and directed. . |
| 47 | S & F 250mm long aliminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alliminium allow and fixed sliding door bolts plate type extanlled black bright bolt not less than 12mm dia with and including a minimun 06 bolts and not less than plate and two on staple plate complete all as specified and directed. |
| 48 | M&L preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 49 | S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or weldedcomplete all as specified and directed. |
| 50 | S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete withoutglazing bars, dovetailed or weldedcomplete all as specified and directed. |
| 51 | S&Fmild steel framed work such as grills,gratings etc with ends of bars shouldered and/ or riveted,or forged into spikes, framed guard bars and similar work conforming to Fe- 290 ( Gde-E-165)complete all as specified and as directed. Note: The unit rate quoted by contractor is deemed to be inclusive of cutting to dead lenth where required, notching, drilling, fitting, rivetting and/or welding or connecting with bolts and nuts (including rivets or bolt and nuts).No claim whatso ever shall be entertained by Govt on this account. |
| 52 | Supply & fix 3mm thick sheet glass, ordinary quality, and glazing with oil putty/beading in square not exceeding 0.50sqm each pane complete all as specified & directed. |
| 53 | Supply & fix Galvanisedsteel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified & directed. |
| 54 | Supply & fix butt hinges, 100 mm long of stainless steel,complete all as specified & directed. |
| 55 | S&Ffancy type curtain rails harisson rails,mild steel , chormium plated with fixing bracket,stops,rollers etc for hangging curtain rod complete all as specified and directed |
| 56 | M&L for machine cut kota stone slab as in flooring, 20-25mm thick over & including 15mm thick cement screed bed in CM (1:6) laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified & directed. |
| 57 | M&L for machine cut kota stone slab as in skirting/ vertical surface, 15-18mm thick over & including 10mm thick rendering in CM (1:4) laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing andmirror polishing complete all as specified & directed. |
| 58 | M&L painting to newsteel surfaces of any description, over 10 cm in width or girth, not otherwise described incl preparation, pring with zinc chromate and two coats of synthetic enamelsteelpaint complete all as specified and directed. |
| 59 | S&F 30mm thick flush shutters, solid core construction with block board core and plywood face panels commercial typeon both sides complete all as specified.( Note : The unit rate quoted by the Bidder is deemed to include for provision of suitable blocks for taking mortice locks, latches , or other fittings) |
| 60 | Supplying and fixing/ laying of 80mm bore dia GI pipe light grade in trenches/ under roads/ along pole/ wall including all fittings, ISI marked as required for cable protection etccomplete all as specified and directed. |
| 61 | Point wiring with 1100 volts grade PVC insulated FR -LSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm diaISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenoliclaminated white sheet cover for mounting switches, sockets, fan regulators complete for the following :- |
| 62 | One light point controlled by one switch. |
| 63 | OneExhaust fan/ceiling fan point controlled by one switch. |
| 64 | One socket outlet 6 amp controlled by one switch on the same board with other switches. |
| 65 | One socket outlet 3 pin 6 amp controlled by one switch on indepdendent board. |
| 66 | Point wiring with 1100 volts grade PVC insulated FR LSH multistranded copper conductor cable 4 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm diaISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete. |
| 67 | S & F modular switch 1 way 6A 1 modulecomplete all as specified and directed. |
| 68 | S & F modular socket 6A 2/3 Pin combined 2 module complete all as specified and directed. |
| 69 | S & F modular socket outlet 1 way 6/16 Amps2/3 pins combined 2 module complete all as specified and directed. |
| 70 | S & F modular switch 1 way 16A 1 module complete all as specified and directed. |
| 71 | S & F Modularflush box 2 modulecomplete all as specified and directed. |
| 72 | S & F Modularflush box 3 modulecomplete all as specified and directed. |
| 73 | S & F modular white cover plate and frame 3 module.all as specified and directed. |
| 74 | S & F Modular/ metalflush box 6 module complete all as specified and directed. |
| 75 | S & F modular white cover plate and frame 6 module complete all as specified and directed. |
| 76 | S&F MCB distribution board SPN, 240 volts,8ways,double door, powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 200 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete all as specified and directed.. |
| 77 | S&F ceiling rose 6 amp, 3 plates polycarbonate body complete all as specified and directed.. |
| 78 | M&L for provision of sub main wiring with tworuns of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC conduit medium grade ISI marked not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 6 sqmm as earth continuity and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish complete all as specified & directed. Notes:- (i) Finished sub main wiring with tworuns of 6.0 sqmm cable & one run of 6 sqmm cable alongwith PVC conduit and its accessories shall be measured and paid as one unit length. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. (iii) Colour coding for wiring/ bus bar/ main connection shall be followed . |
| 79 | S & F modular white cover plate and frame 2 module complete all as specified and directed.. |
| 80 | S&F MCBs as per load requirement"C" series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:- |
| 81 | Single pole 6 to 32 amp. |
| 82 | Single pole and neutral (SPN) 40 amp. |
| 83 | M&L for earthing complete with galvansided steel earth plate electrode 600x600x6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised iron wire 4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 15mm bore GI pipe medium grade including necessary fittings for protection of earthing wire, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge (0.63 mm) 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS deformed bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth wire alongwith protection pipe and testing on completion complete all as specified and directed. Note:- GI wire and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by the contractor. |
| 84 | Supply and laying or fixing or passing in trenches/ on pole/ through pipes,1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 25 sqmm, 2 core including jointing materials such as cable glands & lugs etc Complete all as directed. |
| 85 | Supply and spreading clean and dry fine sand free from sharp materials (unwashed) laying in trenches around the cable for cushioning in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness complete all as specified and as directed ( Note: Punned thickness will be measured for payment). |
| 86 | Supply and laying un-reinforced precast concrete cable covers, Class HV, Type1, flat, size 300mm x 180mm x 40mm complete all as specified and as directed. |
| 87 | S&F single phase ceiling fan1200mm permanent magnet brushless DC motor 230 V 50 Hz single phase 26-30 watt rated current 0.16 amp pf 0.98 370/360 rpm air delivery 210m3rated service value 629m3/min/watt no of blades three type of blade leaf1.05 mm thick aluminium sheet remote control radio frequency 5 speed + off timer optionspeed regulation class of insulation two nos bearing including connection wire complete with all as required and directed. |
| 88 | S&F modular hum freeelectronic step fan regulator, 120 watt 2 module complete all as specified and as directed. |
| 89 | Supply and fixing LED lights fitting 1x 18W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed |
| 90 | Supply and fix in replacement of LED Security Light Luminaire 35 Watt 6000K with high power LED cool white . CRI 75, +/- 5% supply voltage 220/240/50 Hz, light engine driver base. Pole adapter. Powder coated pressure die cast medium grade not less than with 1.2m, long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts bolts and painding with aluminium paint complete all as specified and directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
