Military Engineer Services-MES has published Tender For Repair/Maintenance Of Pumps Motors, Borewell Control Panels And Other Connected At Afs Amla. Submission Date for this Tender is 09-04-2024. Control Panel Tenders in Betul Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 21-Mar-2024 | Corrigendum No 1 | Other | 02-04-2024 |
| 2 | 02-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-04-2024 |
| Sl. No. | Item Description |
| 1 | Material and labour for dismantling centrifugal pump set from the existing foundation after disconnecting the inlet/out let pipe connections, disconnecting the electric supply cables and transporting to repair work shop complete, servicing the pump set including replacement of unserviceable spare parts reassembling and re-fixing to its original position, making mechanical & electrical connections and testing pumping set complete all as specified and directed for the following:- Note: - (i) Spares to be replaced shall be measured and paid separately as supply only in respective items of BOQ. (ii) Rewinding/ Lathing shall be measured and paid separately in respective items of BOQ. (iii) In addition to above the rate quoted by contractor deemed to be includes of transportation, lifting of pump set and replacement of worn out minor parts other than the supply only items such as bushes, check nut etc., if any required for proper functioning of pump set. Note- The Contactor will depute his rep/ sup to take complaint of pump /motor/ centrifugal pump/ submersible pump motor and other necessary complaint of pump house from office daily and rectify accordingly through skilled machinics and give details to concerned JE/MCM so the complaint from user end /pump house can be managed in time. |
| 2 | Centrifugal pump set coupled with electric motor of capacity 1hp3 phase, 415 Volts 50 HZ. Make: Crompton/ Kirloskar |
| 3 | Centrifugal pump set coupled with electric motor of capacity 20 HP 3 phase, 415 Volts 50 HZ. Make: Crompton/ Kirloskar |
| 4 | Centrifugal pump set coupled with electric motor of capacity 35 HP to 50 HP3 phase, 415 Volts 50 HZ. Make: Crompton/ Kirloskar |
| 5 | Centrifugal pump set coupled with electric motor of capacity 60 HP 3 phase, 415 Volts 50 HZ. Make: Crompton/ Kirloskar |
| 6 | Material and labour for servicing complete centrifugal pump motor changing its US bearing,mechanical seal, wear rings,O rings gasket, along with greasing and lathe machine works if necessary after disconnecting from its position carrying it to workshop for servicing and after servicing refixing it to its original position complete checking/ making allignment all the mechinical and electrical connection properly testing pump set complete at siteall as specified and as directed by Engr-in-charge. Note:- Cost of all the material required for servicing is deemed to be included in this rate. |
| 7 | 1 HP Single phase, 415 Volts 50 HZ |
| 8 | 3 to 5 HP 3 Phase 415 Volts 50 HZ |
| 9 | 20 HP 3 Phase, 415 Volts 50 HZ |
| 10 | 35 HP 3 Phase, 415 Volts 50 HZ |
| 11 | 45 HP/ 50 HP,3 Phase, 415 Volts 50 HZ |
| 12 | 60 HP 3 Phase, 415 Volts 50 HZ |
| 13 | Material and labour for rewinding the centrifugal pump set motor by providing high quality of class "B" paper insulation inside the slots, and rewinding with super enamel copper wire of same size and gauge as per existing rapping up with high quality cotton tape and varnishing with super quality oil including drying upto desired temperature and desired time complete including taking old burnt out copper winding, insulation material and cleaning the slots complete all as specified and directed for the following capacity motor for Item no.1(a) to 1(d). :- |
| 14 | 1 HP 3 phase, 415 Volts 50 HZ |
| 15 | 20 HP 3 Phase, 415 Volts 50 HZ |
| 16 | 35 HP 3 Phase, 415 Volts 50 HZ |
| 17 | 45 HP/ 50 HP,3 Phase, 415 Volts 50 HZ |
| 18 | 60 HP 3 Phase, 415 Volts 50 HZ |
| 19 | M&L for lathe machine work for pump repaired vide item no 1.(a) to 1.(d) here in before including necessary transportation if any complete all as directed. |
| 20 | M&L for lathe machine work for motor repaired vide item no 3.(a) to 3.(e) here in before including necessary transportation if any complete all as directed. |
| 21 | Supply only the following spares parts of centrifugal pump set suitable for replacing under item no 1.(a) to 1.(d) and item No 3(a) to (e) here in before: - |
| 22 | Impeller made of brass for 20 HP pump |
| 23 | Impeller made of brass for 35 HP pump |
| 24 | Impeller made of brass for 60 HP pump |
| 25 | Pump shaft made of stainless steel for 20 HP pump |
| 26 | Pump shaft made of stainless steel for 35 HP pump |
| 27 | Pump shaft made of stainless steel for 60 HP pump |
| 28 | Sleeve made of stainless steel for 20 HP pump |
| 29 | Sleeve made of stainless steel for 35 HP pump |
| 30 | Sleeve made of stainless steel for 60 HP pump |
| 31 | Bearing made of stainless steel for 20 HP pump |
| 32 | Bearing made of stainless steel for 35 HP pump |
| 33 | Bearing made of stainless steel for 60 HP pump |
| 34 | Shaft Lock |
| 35 | Gland Cap made of brass for 20 HP pump |
| 36 | Gland Cap made of brass for 35 HP pump |
| 37 | Gland Cap made of brass for 60 HP pump |
| 38 | Gland Cap bolts made of stainless steel |
| 39 | Coupling assembly with keyfor 20 HP pump |
| 40 | Coupling assembly with key for 35 HP pump |
| 41 | Coupling assembly with key for 60 HP pump |
| 42 | Bakelite electrical 6/3 pole terminal for 20 HP motor |
| 43 | Bakelite electrical 6/3 pole terminal for 35 HP to 60 HP motor |
| 44 | Fan Blade of required size |
| 45 | Dismantling suction pipe and S & F in repairs suction/Discharge pipe of size 100 mm dia medium grade GI tubing including necessary fitting such as Socket,elbow,reducer,nipple, bend, flange, nut & bolts etc required and also making good disturbed surfaces to match the existing surface complete all as specified and directed |
| 46 | Dismantling suction pipe and S & F in repairs suction/discharge pipe of size 80 mm dia medium grade GI tubing including necessary fitting such as Socket,elbow,reducer,nipple, bend, flange nut & bolts etc required and also making good disturbed surfaces to match the existing surface complete all as specified and directed |
| 47 | Dismantling suction pipe and S & F in repairs suction pipe of size 50 mm dia Heavy grade GI tubing including necessary fitting such as Socket,elbow,reducer,nipple, bend, flange nut & bolts etc required and also making good disturbed surfaces to match the existing surface complete all as specified and directed |
| 48 | M&L Taking out defective submersible (vertical) pump set of capacity upto 7.5 HP from borewell/shallow well for repair by lifting borewell pipe of any type and size from 40 m to 70m depth well after disconnecting electrical and pipe line connection, complete by means of chain pully block or other T and P, transporting to store for safe custody or work shop for repair complet and reinstalling back to borewell, lowering after reconnecting electrical and pipe line connection, commissioning and testing on full load compete all as specified and directed. Note :- (i) Taking out submersible pump motor and lowering of submersible pump motors will be done by highly skilled machnics andthe work will be done under contactor supervision. (ii)Repairing of pump set only will be measured and paid separately in respective items of BOQ. |
| 49 | Material and labour for repair of 50 mm bore GI pipe taken out vide item No 10 above by cutting down and removing rusted /damaged threaded portion of pipe(one length pipe) from both ends and making thelong deep threads on both ends of the pipe and supply and fix a long ended socket heavy grade screwed and welded at one end complete all as specified and directed. |
| 50 | M&L for repairing of submersible (vertical) pump set upto 7.5 HP vide item no 10 above capacity by opening the pumpset and replacement of unserviceable parts, oiling/greasing the lubricating the parts and reassembling, painting of submersible pumpset with one coat of synthetic enamel paint after clearing and scrubbing complete including testing for satisfactory operation all as specified and directed. Note:- (i) The rewinding, Lathe work, replacement of unserviceable parts with new parts will be measured and paid separately under respective items of BOQ as supply only and labour element for fixing including greasing, overhauling and packing of pump set will be included in the unit rate quoted. (ii) Cost of other minor items / spares such as nut, bolts, washer, gaskets, paints which are not covered under Sch "A" but required for effective functioning of the plant shall be deemed to included in quoted rate. |
| 51 | Material and labour for rewinding the submersible pump set motor 5 HP capacity using suitable size PVC insulated copper wires, replacing the worn out bushes, bearing etc., and reassembling pump and motor including testing for satisfactory operation complete all as specified and directed. |
| 52 | M&L for lathe machine work for pump repaired vide item no 12 here in before including necessary transportation if any complete all as directed. |
| 53 | M&L for lathe machine work for motor repaired vide item no 13 here in before including necessary transportation if any complete all as directed. |
| 54 | Supply only the following spares parts of submersible pump set suitable for replacing under item no 13 here in before: - |
| 55 | Top bowl housing assembly |
| 56 | "O" ring valve metal seat |
| 57 | Brass sleeve/distance piece |
| 58 | Key set |
| 59 | Stage Bowl |
| 60 | Thrust Bearing assembly |
| 61 | Strainer (with screwing etc.) |
| 62 | Brass bush (4 No"s set) |
| 63 | Coupling assembly |
| 64 | Impeller made of stainless steel |
| 65 | Pump shaft |
| 66 | Diffuser |
| 67 | Cable guard made of stainless steel |
| 68 | Cheese head cap screw |
| 69 | Casing strip with threaded bolt end |
| 70 | Sand guard |
| 71 | Stud |
| 72 | Rotor shaft pump |
| 73 | CIR clip |
| 74 | Lower end of the shield of motor |
| 75 | Supply and lay in repairs to 3 core flat cables water proof with bare bunched copper conductor insulated and sheathed with PVC 1100 Volts grade of size 4 sqmm for submersible pump complete all as directed |
| 76 | Supply and lay in repairs to 3 core flat cables water proof with bare bunched copper conductor insulated and sheathed with PVC 1100 Volts grade of size 6 sqmm for submersible pump complete all as directed |
| 77 | Material and labour for taking out horizontal submersible pump set 5 HP capacity from static water tank/open well and repairing by opening the pumpset and replacement of unserviceable parts, oiling/greasing the lubricating the parts and reassembling, painting of submersible pumpset with one coat of synthetic enamel paint after clearing and scrubbing complete including testing for satisfactory operation all as specified and directed. Note:- (i) The rewinding, Lathe work, replacement of unserviceable parts with new parts will be measured and paid separately under respective items of BOQ as supply only and labour element for fixing including greasing, overhauling and packing of pump set will be included in the unit rate quoted. (ii) Cost of other minor items / spares such as nut, bolts, washer, gaskets, paints which are not covered under Sch "A" but required for effective functioning of the plant shall be deemed to included in quoted rate. |
| 78 | Material and labour for rewinding the horizontal submersible pump set motor 5 HP capacity using suitable size PVC insulated copper wires, replacing the worn out bushes, bearing etc., and reassembling pump and motor including testing for satisfactory operation complete all as specified and directed. |
| 79 | M&L for lathe machine work for pump repaired vide item no 19 here in before including necessary transportation if any complete all as directed. |
| 80 | M&L for lathe machine work for motor repaired vide item no 19 here in before including necessary transportation if any complete all as directed. |
| 81 | Supply only the following spares parts ofhorizontal submersible pump suitable for replacing under item no 19 here in before: - |
| 82 | Key |
| 83 | Brass bush |
| 84 | Thrust Bearing |
| 85 | Impeller made of stainless steel |
| 86 | Supply and fix in repairs PVC air cock for air release dia15mm to be fixed on pump including dismantling old from the existing location all as specified and directed. |
| 87 | Material and labour for disconnecting and taking up defective vertical turbine pump set of capacity 45 HP from the existing well and repairing the unserviceable pump & motor by replacing of unserviceable spare parts reassembling, including rewinding of motor and fixing to its original position, making mechanical connections and testing pumping set complete all as specified and directed. Make of pump – WPL, Make of motor - Jyoti Note: (i) Lathe work, Spares to be replaced shall be measured and paid separately as supply only in respective items of BOQ. |
| 88 | M&L for lathe machine work for motor repaired vide item no 25 here in before including necessary transportation if any complete all as directed. |
| 89 | M&L for lathe machine work for pump repaired vide item no 25 here in before including necessary transportation if any complete all as directed. |
| 90 | Supply only the following spares parts ofvertical turbine pumpset suitable for replacing under item no 25 here in before: - |
| 91 | Impeller |
| 92 | Pump shaft |
| 93 | Sleeve |
| 94 | Impeller sleeve |
| 95 | Brass bush |
| 96 | Pipe connecting sleeve |
| 97 | Socket |
| 98 | Gland rope packing |
| 99 | Gland rope fitting |
| 100 | Bearing 7307/7310 (SKF) |
| 101 | Shaft socket |
| 102 | Vt pump roller Bearing7316BEP Make:- SKF, Tata, NBC(NEI) |
| 103 | S & FPVC insulated copper conductor stranded type, 1100 volts grade of size 4 sqmm 3 core electric cable, including connecting to motor & starter with suitable thimble, laidin the conduitincluding dismantling old one complete all as specified and as directed. |
| 104 | S & FPVC insulated copper conductor stranded type, 1100 volts grade of size 16 sqmm 3 core electric cable, including connecting to motor & starter with suitable thimble, laidin the conduitincluding dismantling old one complete all as specified and as directed. |
| 105 | S & FPVC insulated copper conductor stranded type, 1100 volts grade of size 25 sqmm 3 core electric cable, including connecting to motor & starter with suitable thimble, laidin the conduitincluding dismantling old one complete all as specified and as directed. |
| 106 | S & F in repairs pressure gauge, 100 mm size dial , 0-14kg rating fitted on delivery side of pump set , including all necessary items required like ball valve and connecting pipe & dismantling the old one complete all as specified and as directed.(Make : H-Guru/Fiebig) |
| 107 | S & F Voltmeter, digital type,0 to 600V range, flush mounting type, three phase,415V, AC with 3 phase selector switch, including dismantling old one complete all as specified and as directed. |
| 108 | S & F Ammeter, digital type,0 to 100 A range, flush mounting type, three phase,415V, ACwith inbuilt 3 phase selector switch, including dismantling old one complete all as specified and as directed. |
| 109 | S & F indicator lamp LED type, 230 Volts, AC (different colours for indicating R, Y, B phases) with necessary fixing arrangementin panel incl dismanlting old one complete all as specified and as directed. |
| 110 | M& L preparation of old painted surface of pump installation by removing / scraping old paint all dirt, dust, grease, oil etc and painting complete with two coats of synthetic enamel paint of approved colour (Smoke grey, red, black, white, white e.t.c) over a coat of red-oxide primer on Pump set - 03 Nos including their sluice valves, NRV and delivery/suction pipe line, air vent pipe of UG sump , iron ledof UG Sump& channel base frame and cement base paint on cement base in FIlteration pump house all as specified & directed. |
| 111 | M& L preparation of old painted surface ofvalve pit chamber by removing/ scraping old paintdirt, dust, grass, roots etc and painting complete valve pit cover with two coats of synthetic enamel paint of approved colour (Smoke grey or black, e.t.c) over a coat of red-oxide primer - 15 Nos valve pitincludingred colour on sluice valves handle, and delivery/suction pipe line in chamber &cement base paint on inside and out side of valve pitin FIlteration pump house all as specified & directed |
| 112 | M& L preparation of old painted surface of pump installation by removing/ scraping old paintdirt, dust, grease, oil etc and painting complete with two coats of synthetic enamel paint of approved colour over a coat of red-oxide primer on Pump set - 02 Nosincluding their sluice valves,NRV and delivery/suction pipe line channel up to UG sumpin Site C all as specified & directed |
| 113 | M& L preparation of old painted surface ofvalve pit chamber by removing / scraping old paintdirt, dust, grass, roots etc and painting complete valve pit cover with two coats of synthetic enamel paint of approved colour (Smoke grey or black, e.t.c) over a coat of red-oxide primer - 4 Nos valve pitincludingred colour on sluice valves handle, and delivery/suction pipe line in chamber &cement base paint on inside and out side of valve pitin Site Call as specified & directed |
| 114 | M& L preparation of old painted surface of pump installation by removing/ scraping old paintdirt, dust, grease, oil etc and painting complete with two coats of synthetic enamel paint of approved colour over a coat of red-oxide primer in Pump set - 04 Nos including their sluice valves,NRV and delivery/suction pipe line channel in Malanjhiri pump house all as specified & directed |
| 115 | M& L preparation of old painted surface ofvalve pit chamber by removing/scraping all dirt, dust, grass, roots etc and painting complete valve pit cover with two coats of synthetic enamel paint of approved colour (Smoke grey or black, e.t.c) over a coat of red-oxide primer - 10 Nos valve pitincludingred colour on sluice valves handle, and delivery/suction pipe line in chamber &cement base paint on inside and out side of valve pit in Malanjhiri pump house all as specified & directed |
| 116 | M& L preparation of old painted surface of pump installation by removing all dirt, dust, grease, oil etc and painting complete with two coats of synthetic enamel paint of approved colour over a coat of red-oxide primer in Pump set - 02 Nos including their sluice valves,NRV and delivery/suction pipe line channel in Kudmud/Mohad nala pump house all as specified & directed |
| 117 | M& L preparation of old painted surface ofvalve pit chamber by removing/scraping all dirt, dust, grass, roots etc and painting complete valve pit cover with two coats of synthetic enamel paint of approved colour (Smoke grey or black, e.t.c) over a coat of red-oxide primer - 2 Nos valve pitincludingred colour on sluice valves handle, and delivery/suction pipe line in chamber &cement base paint on inside and out side of valve pit in Khudmud /Mohad nala pump house all as specified & directed |
| 118 | M & L for replacingIron rubber coupling set complete ofany pumpset at different pump house along with all nuts/ bolts/washer of required size and fixing the new coupling set by skilled pump machnic and installing by proper allignment of pump set and pump motor complete all as specified and as directed at site. |
| 119 | M & L for replacing only rubber coupling of coupling set of any pumpset at different pump house complete all as specified and as directed. |
| 120 | M & L for replacingRubber Star Couplingof coupling set of any pumpset at different pump house and fixing the new coupling set by skilled pump machnic and installing by proper allignment of pump set and pump motor complete all as specified and as directed at site. complete all as specified and as directed. |
| 121 | M & L for replacingCIStar Couplingof coupling set of any pumpset at different pump house complete all as specified and as directed. |
| 122 | S & F in repairs Single phase preventer and connected to existing strater, suitable for centrifugal pump set of capacity 03 HP to 60 HP (Make : Minilec/L&T/BCH) |
| 123 | S & F in repairs MCCB 125 Amps, 3 pole415 V 36 KA suitable for motor back up protection in exisitng panel along with all connected accessories and arrangement including dismantling the old MCCB all as specified and directed. |
| 124 | S & F in repairs MCCB 100 Amps, 3 pole415 V 36 KA suitable for motor back up protection in exisitng panel along with all connected accessories and arrangement including dismantling the old MCCB all as specified and directed. |
| 125 | S & F in repairs MCCB 160 Amps, 4 pole415 V 36 KA thermal magnetic release with overload setting of 80-100% in existing panel along with all connected accessories including dismantling old MCCB all as specified and direted |
| 126 | S & F in repairs MCCB 250 Amps, 4 pole415 V 50 KA thermal magnetic release with overload setting of 80-100% in existing panel along with all connected accessories including dismantling old MCCB all as specified and direted |
| 127 | MCCB, 4 pole of current rating 63 Amps thermal releaseand rupturing capacity 16 KA -01 Nos in existing panel along with all connected accessories including dismantling old MCCB all as specified and direted |
| 128 | Thermal over load relays 9-12 amps 3 pole in exisitng panel along with all connected accessories and arrangement including dismantling the old Thermal over load relay all as specified and directed. |
| 129 | Supply and fixing in repairspower contactor MNX,3 pole, AC, 110 Amps complete all as specified and as directed. (MakeL& T or equivalent in Siemens/C&S) |
| 130 | Supply and fixing in repairspower contactor MNX,3 pole, AC, 85 Amps rating complete all as specified and as directed. (MakeL& T or equivalent in Siemens/C&S) |
| 131 | Supply and fixing in repairspower contactor,3 pole, AC, 55 Amps complete all as specified and as directed. (MakeL& T or equivalent in Siemens/C&S) |
| 132 | Supply and fixing in repairspower contactor,3 pole, AC,25 Amps with auxillary contacts if required complete all as specified and as directed. (MakeL& T or equivalent in Siemens/C&S) |
| 133 | Supply and fixing in repairs, bi-metallic thermal overload relay type mounted on the contactor with current carrying capacity ranging from 66-110A complete all as specified and as directed. (Make : L&T or equivalent in Siemens/ C&S). |
| 134 | Supply and fixing in repairs, bi-metallic thermal overload relay type mounted on the contactor with current carrying capacity ranging from 45-75A complete all as specified and as directed. (Make : L&T or equivalent in Siemens/ C&S). |
| 135 | Supply and fixing in repairs, bi-metallic thermal overload relay type mounted on the contactor with current carrying capacity ranging from 9-15A complete all as specified and as directed. (Make : L&T or equivalent in Siemens/ C&S). |
| 136 | Supply and fixing in repairs electronic timerST-100 type ranging from 3 - 10 sec/ 12-120 sec (Make : L&T or equivalent in Siemens/ C&S). |
| 137 | Supply and fixing in repairs MCB TPN 63 Amps in existing panels all as specified and directed (Make : Havells or equivalent in Siemens/ C&S/ L & T). |
| 138 | S & F in repairs MCBtriple pole "C" series 6-32 amps in exisitng panels as specified and directed Make: L & T, Legrand, schneider |
| 139 | Suppy and fix in repair DOL starter 3 to 5 HP.Make L&T |
| 140 | Suppy and fix in repair Star Delta starterthree phase 7.5 HP 13.2 - 20 Amp submersible pump controller .Make-Havells |
| 141 | M&L Testing, servicing, inspecting of solar water heater 500 LPD capacity flat plate collector heat exchanger type installed in air men / DSC billets or cook houses make it functional including replacement of defective nuts, bolts, clamps, other minor parts and spare parts complete at any height or position including one coat of painting for complete set all as specified and directed as Engineer in charge. Note: Spare parts will be measured and paid separately hereinafter, servicing will be carried out by authorised company technician of concerned make only |
| 142 | Supply & install in repair solar heat exchanger with complete set of tubes connection withmakeup water tank suitable for 500 LPD solar water heater. Make: Sudarshan |
| 143 | Distilled water for make up water tank. |
| 144 | Supply only electrical heating element with thermostat not less than 2 KW including required length of appropriate size of wire. |
| 145 | Supply onlysolar water geyser heat exchange tubes of measurement 2100x58 mm Make :Tata BP solar,Sudarshan solar |
| 146 | Supply and fix in repairs hose pipe not less thanfrom panel to water tank and viceversa at any height or position all as directed as engineer in charge. |
| 147 | Supply and fix in repairs CPVC pipes SDR 11 & Plain CPVC SDR 11 with outer dia20 mm fittings on walls/ceiling or laying in floors for hot water supply from tank to water supply point at any height or position all as directed as Engineer in charge. |
| 148 | Supply and fix in repairs CPVC pipes SDR 11 & Plain CPVC SDR 11 with outer dia 25 mm fittings on walls/ceiling or laying in floors for hot water supply from tank to water supply point at any height or position all as directed as Engineer in charge. |
| 149 | Taking down unserviceable stop cock S&F stop cock 15 mm dia borehigh pressure with for CPVC pipe or for union All as directed by Eng-in-Charge. |
| 150 | Taking down unserviceable ball valve, S&F CPVC ball valve suitable for 25 mm dia (outer dia) CPVC pipeincluding all connected accessories as directed |
| 151 | M & L Earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick, buried directly in ground vertically earth pit not less than 2.25 mtr deep below the ground level with top to edge of the plate n. less than 1.5 mtr below ground level connected to galvanized earth strip 25x4 mm dia by means of blots, nuts, check nut and washer of galvanized steel, includingnecessary earth work and excavation in any strata and PCC 1:3:6 type C2 chamber and RCC cover and medium grade GI pipe 40 mm dia pipe of requiredlength for protection of GI strip and water funnel and wire mesh with GI pipe medium grade 20mm dia etc complete all as per electrical plate No 3 of SSR part - I and all as directed |
| 152 | S&F GI strip of size 25 x 4 mm with saddles and fixing screws, etc, down conductors/ pump motors/ pannels where requiredcomplete all as specified and directed. |
| 153 | Restringing & Stretching of LT OH lines ACSR conductor of any size including cleaning of insulators & aluminium wire for binding of conductor,cutting/trimming of tree branches on both sides of conductor all as directed 3 phase 3 wire system measured as single run all as directed |
| 154 | M&L for cutting/ trimming of trees branches in Malanjhari pump house /filteration pump house/ khudmud pump house and mohad nala pump house and after trimmingbranches should be thrown far awayfrom the boundary of pump house/filter house. The treaming will be done according to site requirmentarea and will be according to Engr-in-Charge . All required T&P and safety prequation equipmentshould be provided by the contractor at his own cost. |
| 155 | Labour only for maintenance and cleaning of surrounding area of water filteration plant, borewell, malanjhari pump house, by cutting/taking out grasses, Shrubs & bushes, small tree and branches by employing labour / majdoor including using own T&P as required to do the Job and thrown all waste material outside the pump house/ filteration pump house all as specified and as directed by Engr-in -charge. |
| 156 | Supply and fix in repair vice type connectors consisting of two brass plates, and two steel bolts and nuts for 2 conductors of equal or unequal sizes, for non-tension connections "including treatment of connector and ACSR conductor with conducting jelly for conductor size 4 to 7 mm dia all as speicified and directed |
| 157 | S & F in repairPin typeporcelian vitreous brown or white insulator suitable for 1100 Volt working pressure of size 100 mm height, 65 mm dia including one galvanised mild steel spindle, two galvanised iron washer and one GI nut complete including dismantling existing old insulator from position. |
| 158 | S & F in repairshackle typeporcelian vitreous brown or white 1100 Volt working pressure of size, 90 mm dia and 75mm height including GI strap of size of 31 X 3 mm insulator bolt of 12mm dia, nuts and washers for working pressure 1100 V complete incuding dismantling existing old insulator from position.. |
| 159 | M&L for Repair of Electro Chlorination plant by repairing chlorinator cell andWiring of Power pack panel with PVC insulated FR grade multistranded copper conductor of existing size, Repairing & Cleaning and overhauling ofelectrolyser cell complete for its proper functioning, Scrubbing out old rusted paint from outside & inside the panel boxand then spray painting with one coat of red oxide primer and two coats of synthetic enamel paintfor hypochloride solution tank,power pack body and greasing of wheels ensuring free movement along with scrapping old paint from iron ladder support and painting one coat of red oxide and and one coat of black paint and also repair/replacement of UPVC pipe fixed in bottom of the tank along with all accessories complete all as directed at site. |
| 160 | Supply and fix the following Electro Chlorination plantmaterials during repairs of Electro Chlorination plant including making copper cable connections with lugs, connectors, ferrule, glands of suitable sizeas per requirement etc complete all as directed. |
| 161 | Push button ON / OFF switch flush head |
| 162 | Rotary Switch 3 pole 4 way |
| 163 | Thermal Overload Relay MN type (4 to 7.5 amps) compaitable with MNX-9 contactors |
| 164 | Contactor 3 phase 415 V upto 9 Amps |
| 165 | Connector 3 way |
| 166 | Connector 4 way double row bakelite. |
| 167 | Toggal switch |
| 168 | Fuse holder with fuse |
| 169 | Diode |
| 170 | S & F in repair exhaust fan 150 mm sweep single phase with copper wire of appropriate guage |
| 171 | 1000 V DC ,1 Micro farad capacitors with appropriate resistor |
| 172 | CPVC Ball Valve 50mm Make-Supreme/Ketron |
| 173 | Supply & Laying DWC HDPE pipe 63 mm bore of pressure rating 6kgf/sq cm with all fitting complete all as specified and directed |
| 174 | S & F in repairs single phase induction motor 120 watts 1000 rpm 6 ple face/ pad mounting suitable for fixing on frp lid alongwith all accessories including transporting to store for safe custody complete all as directed |
| 175 | M & L for lifting of non clog submersible pump set of upto capacity 5HP 3 Phase 415 V 50 Hz from sewage sump of depth from 4M to 7M by diconnecting the electrical connection ,column pipes of various sizes, submersible cable, removing carefully to store for safe custody or transportaion to workshop for repair and back and reinstallation after repair of pump set and testing all as specified complete all as directed by EIC. |
| 176 | M & L for opening the non clog submersible pumpset , cleaning the pump by opening the opening or carrying out the repairs including rewinding and replacement of unserviceable spares reassembling and connecting up with the electric motor all as specified and directed |
| 177 | Supply only Chloroscope/ chlorine test kit with coloured ample complete with all testing fitment and OT solution in rexene finish boxfor measurement of chlorine level in water showing indication 0.1,0.2,0.5,1.0,1.5,2.0 & above including box type indicator showing indication along with two numbers test tube and reagent complete all as specified and directed. Make- Rmco |
| 178 | Material and labour for cleaning of underground static water tank (SWT) of capacity 20,000 -25,000 gallon after scrapping out the scales/deposits from all inner surfaces of tank thoroughly, washing with bleaching powder solution (mixed @ 0.5 Kg of bleaching powder of chlorine content 30% per 1000 liters of water), bailing out the settled materials completely away from the site within 100 metres distance, cleaning the tank with clean water and finally sterilizing the tank as mentioned in notes below and writing “TANK CLEANED ON…..”(date), “DUE DATE ON…..(date) with 10 cm size white letters on black back ground by engaging skilled artist using best quality synthetic enamel paint all as specified and directed by Engr-in-Charge :- Notes : The contractor should follow the following procedure in addition to above which demeed to be included in the contractor quoted rate. (a) Mechanizedremoval of all dirty water by using highcapacity submersible pumps. (b) Removalof sludgeby using vaccum operated pump (c) Cleaningof walls, ceiling and groundby highpressurerotaryjet of 12 Kg/sqcm pressure. (d) Removal of all dirtparticles by industrial wet vaccum cleaner leavingthe tank physicallycleaned as per Engr-in- Charge satisfaction. (e) Sterilization of tankby agents eco-friendly,bio-degradable and highlyeffectiveagainstall pathogens, or approved chemical. (f) Sterilization of tank atmosphere byindustrial UVradiator leaving the tank completesterilized (g) All the required Tools and plants, lubricants/oils and materials will be supplied by the contractor during the work. |
| 179 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation of poles stays laying of electric cables, pipes etc and getting out in soft/loose soil complete all as specified and directed. |
| 180 | Returning, filling in,including spreading, leveling watering and well ramming in layers not exceeding25cm in soft/loose soil complete all as specified and directed. |
| 181 | Removing surplus soil to a distance not exceeding 50 m and depositing where directed at level not exc. 1.5 m above starting point. |
| 182 | M&L for 110 mm dia DWC HDPE (Double wallcorrugated pipehigh density poly ethlyne pipe) of pressure 6 kgf /cm2for road crossingof cable or for cable protection laid in trenches or above ground surface all as specified and as directed. Make- Ketron |
| 183 | M & L road cutting of size 30 cm width x 45 cm depth for laying of cables incl making good the road with necessaryreturning filling and bituminious portion with concret and bituminious mixture and cemented portion with PCC in 1:2:4 , 15 cm thick from top and matching the surfaces with existingall as directed. |
| 184 | S&F in repairGI bend of size 50 mm dia with flange welded/ threaded for bore well pipe line and pump houseincluding welding works at the borewell site complete with rubber gasket and nuts bolts complete required at site all as specified and as directed by Engr-in-Charge |
| 185 | S&F in repairGI bend of size 80 mm dia with flange welded/ threaded for bore well pipe line including welding works at the borewell site complete with rubber gasket and nuts bolts complete required at site all as specified and as directed by Engr-in-Charge |
| 186 | S&F in repairGI bend of size 100 mm dia with flange welded /threaded for bore well pipe line including welding works at the borewell site complete with rubber gasket and nuts bolts complete required at site all as specified and as directed by Engr-in-Charge |
| 187 | Supplying, laying, testing and Commissioning cable XLPE insulated aluminium conductor,stranded, armoured, PVC sheathed, LT 1100 volt grade, heavy duty as per IS-7098 and providing suitable lugs and cable glands, laid in trenches/ ducts/fixed to wall/ roof/ poles including taking down existing cables complete all as specified and directed of following sizes. |
| 188 | 16 sq mm 4 core |
| 189 | 25 sq mm3.5 core |
| 190 | 35 sq mm3.5 core |
| 191 | Supplying & laying GI Tubing 50 mm dia Light grade pipe with connecting acessories complete in trench for road andon surface/,wall for protection all as dirrected |
| 192 | M&L for flushing of bore well with compressed air (i.e, Truck with compressor) and by pumping muddy water and making bore well clear by contineously flushing borewell for not less than 6 hour incl all necessary tools and plants etc to be arranged by the contractor ( Note- Before flushingtaking out the submersible pump motor and after flushing and then lowering back it to the borewell all cost are deemed to be included in the quoated rate.) complete all as specified and satiesfaction of Engineer in charge at site . |
| 193 | Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch "A" while deriving the Contract Sum for Acceptance. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
