|
| 1 | Mitre / Segmental bend fabrication above 150 NB and upto 300 NB out of pipes. |
| 2 | TT Burner 660 and above |
| 3 | Modified Windbox Assembly (Involving Higher Hardness Tips) |
| 4 | Bellow Exp Jnt CS Including Rnd Crn Fab |
| 5 | Running Meter, Cut to Size of Plates & Sheets |
| 6 | Buckstay corner plate with machining. |
| 7 | Pressing (H), Punching |
| 8 | Drain Oil Tank |
| 9 | AS Fab (M) , SS Fab (L) |
| 10 | Boiler Trim Piping Supports |
| 11 | Machining-PGMA weight upto 1MT |
| 12 | STRAIGHT & BEND RODS WITH THREADING |
| 13 | Machining-PGMA weight more than 1MT |
| 14 | RETAINER A |
| 15 | RETAINER C |
| 16 | Plate Shear to Size (Wt> 0.2 Kg) (Spares) |
| 17 | THREADED CLEVIS M36X3(LH) |
| 18 | Small Despatchable Units involving GF Fabrication |
| 19 | Autoweld Beams, Box, Bracings, Posts (Bolted Design) |
| 20 | General Fabrication (Bolted Design) |
| 21 | Casing / Duct Wall (H) |
| 22 | Shearing (H) |
| 23 | SS Retainer |
| 24 | SS bellow including round corner fabrication |
| 25 | Bellow Type Expansion Joint - Stainless Steel |
| 26 | Strips,Plates,Stiffners,Lug, involving Shearing, Punching, Pressing |
| 27 | Tube/Protection Shield (Spares) |
| 28 | SS small Despatchable units |
| 29 | Pipe Clamp / Tube clipsupto & including 8mm thick both CS/AS |
| 30 | Roof Seal Band (Spares) |
| 31 | U shield ( straight )more than 1 mtr long |
| 32 | U shield bend type more than 1 mtr long |
| 33 | U plate (Spares) |
| 34 | Strap Saddle (Spares) |
| 35 | Corrugated Sheet |
| 36 | Scalloped bar AS/CS upto and including 10 mm thick |
| 37 | Pipe Clamp with guard plate above 6 mm thick both CS/AS. |
| 38 | Spacer Clip (Spares) |
| 39 | Peg fin |
| 40 | ORIFICE PLATE (Spares) |
| 41 | Plate Shear to Size (Wt< 0.2 Kg) (Spares) |
| 42 | SUPPORT PLATE (Spares) |
| 43 | WASHER PLATE (SS) (Spares) |
| 44 | Oil system Tray |
| 45 | Stopper plate (Spares) |
| 46 | Circular Expansion Bellows including Round corner fabrication |
| 47 | Expansion Plate panel and its Attachment |
| 48 | Bent pin upto Rod D12mm |
| 49 | AS FAB (H) |
| 50 | Cassette baffle (CS), (AS),(SS without cover plate) |
| 51 | GF(H),PP (M) |
| 52 | SS FIXING PIN |
| 53 | OilGunComp-GuidePipe&DiffAssy |
| 54 | Machining above 5kgupto 15kg |
| 55 | Machining of components similar to Rail Extension-RH/LH, Drain socket,Rocker shaft lever, rocker shaft, Spherical Rocker , Cable pipe cap assy , precision hex screwabove M30 , coupling nut upto & including M36 ,Turn Buckle,Union M20, Guage Connector, BRG HSG, DRAG LINK CASTING |
| 56 | Mixing Box Assembly involving pipe fabrication |
| 57 | Clevis pin, Welded stud |
| 58 | TT BURNER ATTACHMENTS |
| 59 | Heai Guide pipe assembly |
| 60 | NTPC AW (H) ,GF (M), Machining (L) |
| 61 | NTPC AS AW Buckstay(H) |
| 62 | NTPC AS AW Buckstay(M), AW CS (M) |
| 63 | Girder Pin Connection |
| 64 | Tension Bar |
| 65 | DUCT SUPPORTS - PGMA 48-XX5 GF (H) , HA (M) |
| 66 | GF(H) |
| 67 | GF (H) , Autoweld (M) |
| 68 | Machining above 2kgupto 5kg |
| 69 | Flange m/c (drg:3-43-000-00284,3-43-000-00285) |
| 70 | SUPPORT LUG (Spares) |
