Military Engineer Services-MES has published Tender For Additional/Alternator/Improvement To Certain Building In Tech Area At Af Stn Ambala And Certain Md Accommodation At Af Stn Rajpura Under Ge (Af) Ambala.. Submission Date for this Tender is 17-04-2024. Mobile Generator Tenders in ambala Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 10-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-04-2024 |
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store andd rubbish off the premises, complete all as specified and directed. |
| 2 | Taking down cement or cement lime plaster, any description on stone walls etc incl raking out joints hacking for key, scrubbing down with water, etc, complete all as specified and directed. |
| 3 | Supply only water proofing compound, complete all as specified and directed. |
| 4 | M&L for Vitrified coloured ceramic tiles 10 to 12 mm thick (square/rectangular), area of each tiles exceeding 0.18 sqm but not exceeding 0.38sqm, in floors etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete as specified and directed. |
| 5 | M&L for Vitrified coloured ceramic tiles 10 to 12 mm thick (square/rectangular), area of each tiles exceeding 0.18 sqm but not exceeding 0.38sqm, as in skirting etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 6 | M&L for Virified Ceramic tiles light/dark shade 10 to 12 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 7 | M&L for Virified Ceramic tiles light/dark shade 10 to 12 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 8 | M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 9 | M&L for coloured glazed ceramic tiles of size 350x250x7mm/450 x 350 x 7mm thick on vertical surface such as skirting/dado, set and jointed in neat cement slurry and pointed in colour cement to match over 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 10 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) usingmarble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 11 | M&L for rounding to edges of stone slabs two edge full round,such as in steps,cooking platform and other similar situation complete all as specified and directed. |
| 12 | M&L for 75mm thick cement concrete 1:3:6 type C1, (using 20mm graded mechanically crushed stone aggregate) as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3)complete all as specified and as directed. |
| 13 | Material and labour for granule textured homogenous wall finishing system consisting of two component system of dry granules (25 Kgs Pack) made of 92 % silica particles coated with fade resistant pigments , 100% arcylic polymer bondring agent (5 Kgs Pack with the applied thickness of the coating being between 0.8 mm to 1.2 mm to be applied on cured , smooth level plastered surface including 15mm doubing coat of plaster in CM 1:4 on fair faces ofbrick work or concrete surfaces using water proofing compound @ 3% by weight of cement or as per manufacturer instructions, finished to receive granule textured homogenous, and to be applied by approved applicator of the manufacturer as per direction / supervision ofEngr-in-Charge, all complete , The above textured coating should confirm to surface spread of flame class of BS 476 part 7 : 1971 and pull off strength of the coating to meet JISA 6909 all as specified and as manufacturers specifications/ instruction . Make :- Bakelite Hylam Limeted or equivalent approved by GE. Note:- Supply only water proofing compound shall be measured and paid separately. |
| 14 | M&L for rendering 15mm thick cement plaster 1:6 on brick masonry surface or surface other than fair face of brickwork surface finished even and smooth without using extra cement,complete all as specified and directed. |
| 15 | M&L for rendering cement plaster 15mm thick and surface of brick workin two layer i(10+5)10mm thick 1st layer and 2nd layer is 5mm cement mortar (1:4) on fair faces ofbrick work or concrete surfaces using water proofing compound @ 3% by weight of cement or as per manufacturer instructions, finished even and smooth without using extra cementcomplete all as specified and directed. Note:-(i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 10% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years.However contractor may deposite the FDR of same amount in favour of GE.If contractor fail to rectify the defect pointed out during this period in writting,the defect shall be got rectified at contractor"risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee.Contractor"s quoted rate for this item shall deemed to be inclusive of this aspect. |
| 16 | M&L for preparing of new plastered or un-plastered surfaces and applying two coats of oil bound distemper includingpriming plastered and other surfaces with alkali resistant priming paint over 3mm thick wall care putty complete all as specified and directed. |
| 17 | M&L for complete removal of existing treatment and preparation of old plastered or un-plastered surfaces and applying two coats of oil bound distemper including 3mm thick JK birla wall care putty , complete all as specified and directed. |
| 18 | M&L for preparation for new plastered / concrete wall surfaces, etc. and for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over (camouflage pattern) and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfacesincl providing over a coat of wall care putty over plastered surface to prepare the surface even and smooth, complete all as specified and as directed |
| 19 | M&L for complete removal of existing treatment of wall andpreparationof old plastered or Un plasteredsurfaces of wall and for applying twocoats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over (camouflage pattern) and including providing over a coat of wall care putty over plastered surface to prepare the surface even and smooth, complete all as specified and as directed |
| 20 | M&L forpowder coated anodised aluminium doorand chowkhatsmade out of hollow extruded aluminium section as mentioned below. Each door shall beprovided with 02 Nos disc or Dtype aluminium handles, 02 Nos aluminium tower bolts 200mm long, one brass mortice lock of six levers with key in duplicate and shallbe regulated by provided double action hydraulic floor doorspring/hydraulic door closer (Make sandhu/RITZ).Shutter to be partly glazed with andincluding 5mm thick tinted glass and partlypanelled with and including 12mm thick prelaminated particle board with decorativelaminations on both sides, rubber beading/gasket, anodised aluminium beading, screws complete in all respect all as directed by the Engineer-in-charge. Chowkhat/frame: 101.6x44.45x1.5mm thickShutter top and bottom rail: 114.3x44.45x1.5mm thickShutter middle rail : 83.5x44.45x1.5mm thickShutter vertical/style : 83.5x44.45x1.5mm thick MAKE : (i) Anodised aluminium section : JINDAL, HINDALCO, INDALCO(ii)PARTICLE BOARD : NOVAPAN, KITPLY, BHUTAN BOARD (iii)Glass : saint gobin, modi guard, TATA. |
| 21 | Supply and fixing powder coated anodisedaluminium window / ventilator including aluminium grill made outof hollow extruded section as mentioned belowand glazed with tinted glass 5mm thick fixedwith glazing clips rubber beading/gasket anodised aluminiumbeading screw and lock type handlesof size 75mm, 2 Nos aluminium tower bolts 150mm long etccomplete all as specified anddirected with the following sizes:- Chowkat/Frame Size :101.6x44.45x1.5mm thick Mullion: Not less than 0.55Kg/RM Shutter : Not less than 0.55 Kg/RM |
| 22 | Taking down chowkats or frame (doors/windows) of any description not exceeding 1.5 Sqm each(without taking off shutters from the frames) complete all as specified and directed. |
| 23 | Taking down chowkats or frame (doors /windows) of any description exceeding 1.5 Sqm each and not exceeding 4 Sqm (without taking off shutters from the frames) complete all as specified and directed. |
| 24 | Supply and fixing MSframed work as in doors or gates of angle or other sections, bars with gusset plates, rails, braces, etc complete drilled for fixing to steel sheeting or other covering, doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing, including necessary screws, fastners etc, complete conforming to Fe-410-W complete all as specified and as directed by Engineer-in-Charge. |
| 25 | S&F MS framed work such as grills, guard bars of window and similar work with ends of bars shouldered and/ or riveted, or forged into spikes conforming to Fe 290(Gde E-165) complete all as specified and directed. |
| 26 | Supply andFixing for bands,straps, hold fasts ; wall ties, plate washers and similar small articles confirming to Fe-209 Gde-E-165 complete all as specified and directed. |
| 27 | Material and LabourPCC (1:3:6) type C1, (using 20 mm graded mechanically crushed stone aggregates) as in filling of MS sheet chowkats, fixing of hold fast and window, chajja etc including making the surface good and even, complete all as specified and directed. |
| 28 | S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 29 | M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 30 | M&L for Preparation of old painted wood and wood base surfaces of any description, not otherwise described over 10 cm width or girth and painting with a coat of sythetic enamel paint, complete all as specified and directed. |
| 31 | S&F 150mm size, aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 32 | S&F aluminium, anodised barrel tower bolt of extruded section and fixed 200 mm of size, complete all as specified and directed. |
| 33 | S&F 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel spring complete all as specified and directed. |
| 34 | S&F butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed. |
| 35 | S&F SS 25mm dia , powder coated, fancy type, aluminium decorative tubular curtain rod with decorative ball type side brackets, stops ,rollers etc, complete all as specified and directed. |
| 36 | Supply and fixing300mm long, Aluminium alloy,anodised sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sectionsor cast aluminium alloy, complete all as specified and directed. |
| 37 | Supply and fixing Solid PVC Door frame of size 50 mm x 47mm made out of 5mm plain PVC sheet reinforced with 19mm x 19mm M.S. Square tube profiles are mitred cut at corners and joined by inserting 2 Nos 150 mm long brackets of 15mm x 15 mm MS square tube shall 19 mm x 19 mm in square tubes and suitably screwed suppling & fixing in opening, complete all as specified and as directed by Engineer-in-Charge. |
| 38 | Supply and fixingFactory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawingcomplete all as specified and directed by Engineer-in-Charge. |
| 39 | Supply and fixingButt hinges 125 mm size, medium weight, cold rolled mild steel complete all as specified and directed.. |
| 40 | Supply and fixing150mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed. |
| 41 | Supply and fixing aluminium handles, cast type, anodised150 mm size complete all as specified and directed. |
| 42 | S&F, in repairs, 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws to timber frame work in cup boards, rebated or flat edged complete all as specified and directed. |
| 43 | M&L for 6mm thick external teak wood lipping fixed to18/19mm thick block or Veneered particle boards with nails complete all as specified and directed. |
| 44 | S&F continuous (piano) hinges, mild steel bright finish or electrogalvanised, width of flap 40 mm complete all as specified and directed. |
| 45 | S&F hasp & staples 125mm in size, safety type aluminiumanodised fixed with screws, complete all as specified and directed. |
| 46 | S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed. |
| 47 | S&F in repair sinks with drainage board made of stainless steel 1mm thick for kitchenwith plugs, washers and waste coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160m including 32 mm PVC waste pipe, complete all as specified and directed. |
| 48 | S&F in repairs, 15mm brass chromium plated fancy type bib cock with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 49 | S&F in repairs, 15mm stop valves /Angle valves/conceal stop cock, fancy type brass chromium plated for iron pipe or for unions and fixed to 15mm bore pipe, complete all as specified and directed. |
| 50 | S & F in repair 15mm pillar taps, brass chromium plated fancy typewith capstan heads, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed foriron pipe or for union and fixed to 15mm bore pipe, complete all as specified and directed. |
| 51 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm IN REPAIR, complete all as specified. |
| 52 | S&F in repair 600 x 450 mm mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 53 | S&F Towel ring 200 mm dia chromium plated fancy type conforming to the sample kept in the office of Engineer-in-Charge. |
| 54 | S&F 1200X600mm designer looking mirror of selected qualitywith chromium plated brass screws and cup washers and fixed in repairs, complete with accessories, complete all as specified and directed. |
| 55 | S&F brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges for wash hand basin area with brackets complete all as specified and directed. |
| 56 | Supply and fixing in repairs8mm dia Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positioncomplete in all respect as specified and directed. |
| 57 | S&F Toilet paper holder of brass chromium plated conforming to the samples kept in the office of Engineer-in-Charge. |
| 58 | Supply and fixing in repairs corner Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long , complete all as specified and directed. |
| 59 | S&F SS grating doom 100/125mm (with or without hole) including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), complete all as specified and directed. |
| 60 | S&F gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, 20mm bore, complete all as specified and directed. |
| 61 | S&F brass chromium plated soap dish complete all as specified and directed, complete all as specified and directed. |
| 62 | Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed. |
| 63 | Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed. |
| 64 | S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floorsfor 15mm bore of pipe complete all as specified and directed. |
| 65 | S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floorsfor 20mm bore of pipe complete all as specified and directed. |
| 66 | S&F rotational moulded polyethylene water storage tanks of capacity 500ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR-Part-Iincluding disconnecting and removal of old U/S PVC tank, complete all as specified and directed. |
| 67 | S&F in repairs 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed. |
| 68 | Dismantling of PVC pipes jointed in neat cement mortor and taking out of trenches if required, complete all as specified and directed. |
| 69 | Supply and fixing in repairs PVC bend any radius, conforming to IS:14735, suitable for uPVC soil waste discharge pipes 110 mm size, with oval and access door, complete all as specified and directed. MAKE: SUPREME, FINOLEX, PRINCE, DIPLAST. |
| 70 | Supply and fixing in repairs PVC bend any radius, conforming to IS:14735, suitable for uPVC soil waste discharge pipes 75 mm size, complete all as specified. MAKE: SUPREME, FINOLEX, PRINCE, DIPLAST. |
| 71 | Supply and fixing in repairs PVC cowl any radius, conforming to IS:14735 suitable for110 mm bore, complete all as specified and directed. MAKE: SUPREME, FINOLEX, PRINCE, DIPLAST. |
| 72 | Supply and fixing in repairs UPVC floor/ Nahani trap with PVC grating suitable for 75 mm external dia,type-B pipes, ISI markedincluding jointing to waste pipe fixed in cement concrete type B1 (1:2:4), complete all as specified and directed. MAKE: SUPREME, FINOLEX, PRINCE, DIPLAST. |
| 73 | Supply and fixing in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement for 110 mm external dia,type-B pipes, ISI marked complete all as specified. MAKE: SUPREME, FINOLEX, PRINCE, DIPLAST. |
| 74 | S&F PVC(SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, fixed to walls complete including faixing clamps, complete all as specified and directed. |
| 75 | S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls, complete all as specified and directed. |
| 76 | S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls, complete all as specified and directed. |
| 77 | Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loosesoil complete all as specified and directed. |
| 78 | Returning, filling in, including spreading, levelling, watering and well ramming in layer not exc 25cm in soft/loose soil, complete all as specified and directed. |
| 79 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified and directed. |
| 80 | M&L forcement concrete (1:4:8) type D-2 (using 40mm graded mechanically crushed stone aggregate) as in Foundations filling and mass concretecomplete all as specified and directed. |
| 81 | Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 82 | M&L forbrickwork with sub class"B" Bricks (old size), straight or curved on plan exc 6m mean radius, built in CM 1:4, complete all as specified and directed. |
| 83 | Demolition of brick work or stone boulder masonary built in cement mortar including all quoins, arches, pillars etccomplete all as specified and directed by Engineer - in - Charge. |
| 84 | Dismantling of asbestos cement /Galvalume auminum(corrugated, semi corrugated) sheets including ridges as in roof covering, complete all as specified and directed. |
| 85 | M&L forpre painted galvalume aluminium zinc coating GI based corrugated Steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mps as in roof covering/cladding to wall fixed with selftapping screwes complete all as specified and directed. |
| 86 | M&L for MS work as in tubular/angle roof trusses (framed), trusses, purlins crane gantries, rails and fastening and heavy brackets framing (beam, tee, angle, channel or flat sections) including distance pieces cleats etc conforming to Fe 410 W (Gde E 250) quality B complete all as specified and directed. |
| 87 | Material and labour for preparing surfaces of new or previously untreated surfaces ofsteel or metal works and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer over 10cm in width or girth complete as specified. |
| 88 | Material and labour for preparing old surfaces of steel or metal works and applying two coats of synthetic enamel paintover 10cm in width or girth complete all as specified and directed. |
| 89 | Dismantling of wall and ceiling boards (fibre,pulp, insulation, etc or insulation boards/slabs/blankets,any thickness including cover fillets, complete all as specified and directed. |
| 90 | M& for L 12mm thick Perforated particle board /tiles for insulation and accoustic purpose, 60x60 cm in size, decorative type with silver foil coating on back side, fixed with nails to timber frame work wth staples on to a snap grid, as in false ceiling and 4mm dia GI wire with nuts & bolts, adjustable arrangement and washers etc, complete all as specified and directed. |
| 91 | S& F powder coated Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thickhaving two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and directed. |
| 92 | S&F Hanger of GI (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long expension hold fastener 12.5mm dia. 40 mm long complete all as specified and directed. |
| 93 | S&F solid PVC wall lining consisting of 5mm thick plain colour PVC Sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawings, complete all as specified and directed. |
| 94 | S&F 5 mm thick PVC Sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing, complete all as specified and directed. |
| 95 | M & L for plain cementconcrete M-10 Nominal Mix (1:2:4) Type B-0 (using 12.50 mm graded mechanically crushed stone aggregate), as in lintels upto 1.5 m clear span, cills, steps,seismic and other similar bands, plinth course, string courses, lacinng courses, parapets and railings, copings, kneelers, apex stones, bed plates, hold fast, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 96 | Material and labour for 25mm thick PCC 1:2:4 type B1 (20mm graded mechanically crushed stone aggregate) in sub basecomplete all as specified and directed. |
| 97 | S&F, Chromium over head shower rose 200mm dia round/square shape single flow (ABS Body chrome plated with Gray face plate) with rubit cleaning system, with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 98 | Supply and fixing in repairs 32 mm bore dia wastepipe for WHBs/urinals/sinks, including all joints and necessary fitting , complete all as specified and directed. |
| 99 | S&F in repair, one piece vitreous china wash down water closet pan (Pedestal pattern), white with "p" or "s" trap (including flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. complete all as specified and directed. |
| 100 | S&F in repair, vitreous china wash basin table top, white, flat back of size 550mm x 400mm (oval/square/rectangular) including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed. Note :- Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately., complete all as specified and directed. |
| 101 | S & F whiteglazed earthen ware vitreous china wash hand basin of size 550x400mm with and including CI brackets, 32mm bore brass CP waste coupling Inlet/ outlet, 32mm PVC waste pipe and PVC connection/ flexible pipe 600mm size for 15 mm bore pipe with brass nut and washers etc complete all as specified and directed. |
| 102 | S&F, one piece vitreous china wash down water closet pan (Pedestal pattern), white with "p" or "s" trap (including flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. including its plastic seat cover white closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device and SS brass chromium plated jet spay fixed with seat cover, complete all as specified and directed. |
| 103 | Supply and fixing in repairsCP wall mixer for mixing hot & cold water screwed down for iron pipe (15mm bore), including divertor for hot and cold, and fixed all as specified and directed. |
| 104 | Supply and fixing in repairsCPmixer for WHB, for mixing hot & cold water screwed down for iron pipe (15mm bore), and fixed all as specified and directed. |
| 105 | M&L for 1st class hardwood (teak wood) 40mm thick panelled door shutter, decorative type (engraving design). The size of rail and stiles as per IS 1003 Part I, kiln seasoned and chemical pressure treated including teak wood chowkhat, with all necessary iron door hinges or required size, screws, holdfast, door handles (both sides), door stopper, hyraulic door closer, fancy secured door locks, (operated both sides i.e inside and outside) and including finishing the door/chowkhat surface with priming, wooden warnishing, painting etc, complete in all respect, as directed by Engr-in-Charge. Note: Pattern of engraving shall be approved by GE before execution. |
| 106 | M&L forframeless partition for window/door with acoustic insulated glass(saint gobain/modi make) of 12mm thick air gap+12 mm on two/three side filled with silicon cork sealants with desired frameless or wooden framework (using ply & sun mica, if required), also and fixing with dorma/ozone make single leg spider, ceiling/bottom to glass connector, glass to glass connector, handle, doorset, floor spring(as per reqmt), pivot etc. Glass will be fixed as per acoustic parameter to maximum cut low frequencies the necessary fittings upto all height including scaffolding, complete all as per the direction of Engineer-in-charge. |
| 107 | M&L for providing foam (as per requirement) for packing between ceilings for sound proofing,complete all as specified and directed. |
| 108 | M&L for Chequered cement concrete prepolished colour tiles 30 cm x30 cm x 25 mm thick,set jointed and pointed in neat cement slurry in floor using grey cement with pigment.including 20 mm thick screed bedding in CM 1:6 over 75 mm thick cement concrete sub base type D-2 1:4:8 (using 40 mm graded mechanically crushed stone aggregate) complete all as specified and directed |
| 109 | M&L rendering 10mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified & directed. |
| 110 | M & L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper all as specified and directed |
| 111 | M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and for any othersimilar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 112 | M & L for Reinforced cement concrete (nominal mix) cement concrete type B-0 1:2:4 (12.5mm graded mechanically crushed stone aggregate)in Slabs supported on walls, beams canopies, deck slabs and in any other discription complete all as specified and directed. |
| 113 | M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 114 | All as per BOQ srl item No. 113.00 here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed. |
| 115 | Supply andfixing steel window (box type) factory made double shutter (glazed and wire gauzed) with side hung shutters including pintle type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, including gauged and glazed Skelton shutter 30mm thick, complete with glazing bars dovetailed or welded including MS fillets, welding of 10 mm guard bars,galvanised mild steel wire cloth,0.63 mm nominal dia of wire, 3 mm thick sheet glass ordinaryquality andglazing with oil putty and onecoat of red oxide primer and two coat of synthetic enamal paint over window, frame & guard bars complete all as specified and directed. Notes: - (i) Windows shall be fabricated as per HQ CE Chandigarh Zone drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 with one amendment dated 22 Jun 07 in Sh 1/3 and dt 15 Jun 07 in sh 2/3 & 3/3 and these drgs may be referred from the office of GE (AF) Ambala. complete all as specified and directed by Engineer-in-Charge. |
| 116 | Supply and fixing 3 mm thick sheet glass ordinaryquality andglazing with oil putty in squares/ractangular not exceeding0.5 Sqm in each pane complete all as specified and directed. |
| 117 | Supply and fixing galvanised mild steel wire cloth,0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed. |
| 118 | M&L Pressed steel frames size125 x 60mm for doors with one or more rebates i including necessary fixing lugs, hinges, lock strike plate, hold fasts , PCC 1:3:6 type C-0 in filling inside frame & hold fasts etc complete all as specified and directed. Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhatsshall be repaired to match with existing finish .Cost of the same will be included in this item )etc., complete, as specified, supplied and fixed all as specified and directed. |
| 119 | S&F factory made flush shutters 30mm thick, 7 Ply,solid core construction, with block board core and plywood face panels, commercial type on both sides with both faces are covered and including painting with one coat of pink primer and two coats of synthetic enamel paint and supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm -3 Nos per leaf, (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 1 Nos per leaf, (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf, (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm- 1 Nos per leaf, , complete all as specified and directed by Engineer-in-Charge. |
| 120 | S&F 35mm thick glazed and skelton shutters of 2nd class Hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated including prepration of new wood surface ,applying two coats of synthetic enamel paint over a coat of pink primer all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.22mm) and the supply and fixing following items:-(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm -4 Nos per leaf, (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf, (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf, (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm- 1 Nos per leaf, (e) Stainless Steel (304 Grade) Finished helical spring- 1 Nos per leaf, complete all as specified and directed by Engineer-in-Charge. |
| 121 | Supply and fixing 35 mm thick, 2nd class hardwood rail and style plain, framed, panelled shutters (two panel) with lock rail and panel of 9 mmB.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both face.The size of rail and stile as per IS :1003 (Part I), kiln seasoned and chemically pressure treated including (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm -4 Nos per leaf, (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf, (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf, (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm- 1 Nos per leaf, (e) Stainless Steel (304 Grade) Finished Floor Door Stooper- 1 Nos per leaf, complete all as specified and directed by Engineer-in-Charge. |
| 122 | Supply and fixing galvanised mild steel wire cloth,0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed. |
| 123 | M&L for repair Mild steel,300 mm, helical door springincluding roller and roller plate, ISI marked, complete all as specified and directed. |
| 124 | Material and labour for preparing surfaces of new or previously untreated surfaces ofsteel or metal works and applying two coats of synthetic enamel paint over one coat of red oxide over 10cm in width or girth complete all as specified and directed. |
| 125 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and directed by Engr-In-Charge. |
| 126 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.50 sqm but not exceeding 4sqm each complete all as specified and as directed. |
| 127 | M&L for Mild steel plain, black 1.25mm thick sheet in steel gates and similar work , cut to size, fixed to steel framing gates with plain 40mm lap joint with welded or riveted complete all as specified and directed. |
| 128 | S&F prepainted galvalume aluminium zinc coating GI based corrugated steelsheet 0.50 mm thick of an colour having tensile strength 550 MPA as in roof covering/ cladding to wall, fixed withself tapping screws / L type or J type hook complete all as specified and directed. |
| 129 | S&F 15 mm bore GI tubing mediumgrade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed. |
| 130 | Supply and fixing, 15 mm bore Bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 131 | Supply and fixing, 15 mm bore pillar taps,fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 132 | S&F Angle stop cock, of 15mm bore chromium plated Stop valves, cast copper alloy, screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 133 | Supply and fixing, PVC valveless, syphonic action type, flushing cistern (ISI marked) of 10 litres capacity, low level (white) with inlet, ball valve, float and handle including bracket and flush pipe complete all as specified and directed. |
| 134 | Supply and fixing, vitreous China squatting pan, "Orissa"pattern, size 580 x 440 mm white with integral foot rest and "P" or "S" trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc including all accessories reqd complete all as specifiedand directed. |
| 135 | M & L for brick work with sub class `B" bricks old size in CM 1:4 straight or curved on plan exceeding 6m mean redius in damaged man holes septic tank/soak well etc all as specified and directed. |
| 136 | S & F Vitreous china premium/ 1st quality wash down water closet EWC white/ ivory/off white (closed pattern including all necessary accessories including flushing cistern (single piece) complete in all respect completeall as specified and as directed. Make-Parryware, Jaquar, Hindware, Cera |
| 137 | S&Fvitreous china wash down water closet pan floor mounting (pedestal pattern/EWC) P trap white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and including. plastic seat cover, complete all as specifiedand directed.. |
| 138 | S&F health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 139 | S&F in repair Vitreous China wash basin with padstal white, flat back size 550x400mm excluding taps, waste chain and plug and porcelian stopper but including brackets complete all as specified and directed. |
| 140 | Supply and fixing Grating doom 125 mm dia with waste hole complete all as specified and directed. |
| 141 | M & L for Cement concrete 40mm thicktype B-0 1:2:4(12.5mm graded mechanically crushed stone aggregate) in floor/sub base complete all as specified and directed. |
| 142 | Materialand labourfirstquality, glazed ceramic color tiles in vertical surfaces size 450x300x7mm thick,including 10mm thick rendering as backing in CM (1:4), set and jointed with grey cement slurry and pointed in white or coloured cement to match complete including Dismantling of wall tiling including cement mortar bedding and backing all as specifiedand directed by Engineer-in-charge. |
| 143 | Taking down carefully aluminium/copper point wiring (light, fan socket or power) complete including fittings & fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of walls, floors etc complete all as required and keeping serviceable light fittings in safe custody for reuse in the work complete all as specified and directed.. |
| 144 | M&L for point wiring with single corePVC insulatedFRLS unsheathed,1100 volt grade cable with multi strand copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic concealedPVC conduit,25mm, medium grade, as directed/ ground requirement, ISI markedof suitable size,ceiling with GI screws, rawlplugswith all fittings including Tee, Junction boxes and provision of pressed steel terminal box powder coated or PVC Boxof suitable size with3 mm thicklaminated or PVC sheet coverfor mounting switch sockets and regulators and drawing continuous earth wire ofPVC insulatedFRLS unsheathed 1100 Volts grade cable withstrandedcopper conductor of size 1.5 Sq mm (Nominal area) complete all as specified and directed. |
| 145 | One light/ ceiling fan/exhaust fan point controlled by one 5Amps switch, complete all as specified and directed. |
| 146 | One 3 pin 5 Amps socket point controlled by one switch on same board, complete all as specified and directed. |
| 147 | One 3 pin 5 Amps socket point controlled by one switch on independent board,complete all as specified and directed. |
| 148 | One bell point controlled by one bell push, complete all as specified and directed. |
| 149 | All as per BOQ srl item No.144.00 here-in-before but with 2.5 Sqmm for 3 pin 16 Amps socket point controlled by one switch on independent board and 2.5 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed. |
| 150 | M&L for submain wiringwith 2 runs of copper conductor FRLS PVC insulated unsheathed cable 1100 volt grade 2.5 sqmm drawn through PVC conduit25mm dia ISI marked as per IS specification fixed concealedin wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 2.5 Sqmm FRLS multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified. Note : Four runs of 2.5 sqmm cable alongwith one run of 2.5 Sqmm PVC insulated unsheathedcopper conductor as earth wire, conduitand conduit accessories will be measured as one length. |
| 151 | M&Lfor submain wiringwith 2 runs of copper conductor FRLS PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through PVC conduit25mm dia ISI marked as per IS specification fixed concealedin wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 4 Sqmm FRLS multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified. Note : Two runs of 4 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathedcopper conductor as earth wire, conduitand conduit accessories will be measured as one length. |
| 152 | M&L for submain wiringwith 4 runs of copper conductor FRLS PVC insulated unsheathed cable 1100 volt grade 6 sqmm drawn through PVC conduit25mm dia ISI marked as per IS specification fixed concealedin wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 6 Sqmm FRLS multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified. Note : Four runs of 6 sqmm cable alongwith one run of 6 Sqmm PVC insulated unsheathedcopper conductor as earth wire, conduitand conduit accessories will be measured as one length. |
| 153 | S&F switch piano flush type single pole, one way 5 amp complete all as specified and directed |
| 154 | S&Fsocket outlet 2 in 1 , 3 pin 5 Aflush type complete all as specified and directed. |
| 155 | S&F switch piano flush type single pole, one way 15 amp complete all as specified and directed . |
| 156 | S&Fsocket outlet 2 in 1 , 3 pin 15 Aflush type complete all as specified and directed. |
| 157 | S&Fceiling rose 65x50mm three terminals 230 volt complete all as specified and directed |
| 158 | S&F stepped type electronic fan regulator flush type complete all as specified and directed |
| 159 | Supply and fix bell push flush type 230 Volt complete all as specified and directed. |
| 160 | Supply and fix call bell ding dong 230 V single phase complete all as specified and directed. |
| 161 | S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 162 | S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 163 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete |
| 164 | S&F distribution board double door type(for incoming MCCB & outgoing MCBs) TPN 4 way vertical type sheet steel powder painted with bus bar ,neutral link & earth bar etc. with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing cables/circuit wiring complete all as specified and as directed. |
| 165 | S&F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA suitable for 4 TPN DB complete all as specified and directed. |
| 166 | S&F MCB three pole and neutral 415 Volts, 63 A, 10 KA complete all as specified and directed. |
| 167 | S&F MCBs 63 amp SPN C curve 240 Volts 10 KA complete all as specified and as directed. |
| 168 | S&F MCBs5 to 40 amp SP C curve 240 Volts 10 KA complete all as specified and as directed. |
| 169 | S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed. |
| 170 | S&F PVC body air freshner 220/230 mm sweep single phase 230 volts including lovers and fixing arrangement as per site requirement complete all as direceted. |
| 171 | M&L for taking down old unserviceable ceiling fans, sealing cable, dismantiling blades and depositing to the MES store complete all as specified and directed. |
| 172 | M&L for rewinding toceiling fan motor windedwith winding machinewith super enameled copper winding wire of existing size includinginsulated sleeves & paper, varnishing with ‘B’ class insulation varnish thimbles, connection with flexible cableof copper conducor of size 23/.0076upto connector block including painting and refixing back after repair on its position complete all as specified and directed. |
| 173 | S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) without remote complete all as specified and as directed. |
| 174 | M&L earthing complete with galvanized steel earth plate electrode 600x600x6.0 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand includinggalvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means ofnuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dollyall as shown in electrical plate No 3 of MES SSR part I and testing on completion includingnecessary excavation and earth work in any type of soil,PCC(1:3:6) type C1 chamber,pre-cast RCC slab 50mm thic in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,15mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc all as specified and as directed. Note: (i) cost of earth strip and GI pipe for protection of earth strip deemed to be included in unit rate up to 7.5 meter. (ii) On testing if the desired earth resistance is not obtained, entire earthing shall be re-done by contractor till desired earth resistance is not obtained without accruing any extra cost to the Department. |
| 175 | S&F single pole and neutral sheet metal enclosures with a two pin and earth plug and socket 240 V, 230 volts, 50HZ complete with one single pole MCB 20 A complete all as specified and directed. |
| 176 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sqmm 3.5 core including taking down of old unserviceable cable of any size complete all as specified and directed. |
| 177 | M&L river sand as in sand cushioning to under ground cable including punning down complete all as specified and directed. |
| 178 | M&L for brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick not exceeding 10mm complete all as specified and directed. |
| 179 | S&F GI tubing 80 mm bore light grade galavanised with all fitting complete for cable protection under road crossing/on pole/wall or similar position complete all as specified and directed. |
| 180 | M&L for Making bore to road/cement path/hard standing for providing GI pipe 80mmboth end socketed for passing armoured cable incl making good the disturbed surface complete all as specified and directed. |
| 181 | S&F energy efficient LED light fitting, 35W, input voltage 110V to 280VAC, 50Hz with ingress protection IP 66, LM 80, stranded luminries with efficiency 100lumen/Watt, with secondary optics, perfectly matched lenses, complying to IEC60598/IS10322, with auto shut down on high voltage, CRI>70, PF>0.95, with short circuit & reverse circuit protection against 10kV high surges, minimum 50000 burning hours (life), operating temperature 1 to 50oC, rectangular shape with pressure die cast aluminium housing with weather proof gasket for lamp and driver compartment with system wattage of 60W=10%W, rated lumens, 120o view angle, constant current type driver having THD<10%, including all fixing arrengment like clamps, nuts, bolts, washers, 35W LED (havng PF>0.9, input voltage 90-300V, IP-66, LM80) with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable with all necessary staging, etc. for fixing including taking out and disposing old fitting any type complete all as specified and as directed |
| 182 | Supply and fixing of electric water heater (Geyser), storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed. |
| 183 | M&L for point wiring with PVC insulated and unsheathed cable 2.5 Sqmm (nominal area) ISI marked multi-stranded copper conductor single core including 20mm dia medium grade PVC conduit concealed in wall / false ceiling, concealed terminal boxes not less than 1.6 mm thick of required size with top cover 3 mm thick of plastic laminated sheet (Hylum)of required colour completemetal flush terminal boxes with all accessories including 2.5 Sq mm PVC insulated and unsheathed stranded copper wire conductor cable to common earth and connecting to earth dolly including colour coding of cable shall be Phase - Red, Neutral- Black and Earth- Greenfor 15 Amps socket outlet complete all as specified and directed Note: Cost of making good disturbed surface matching with existing shall be beemed included in the quoted rate. |
| 184 | S&F Switch socket combination 3 pin 16A, flush type complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
