|
| 1 | Material and labour for preparation of old painted surfaces of steel tubular pole any type incl cross/arms and painting with two coat of aluminium paint over a coat of red oxide primer after cleaning/srappingof existing rusted surface incl cross arms, clamps etc for 8.5/9.00 meter long single pole complete including marking of pole No with white paint on black colour background with all arrangement for ladder etc all as specified and directed. |
| 2 | Material and labour for painting of bottom portion of the pole upto 0.75m from top of the copping with one coat of synthetic enamel paint of af colour over a coat of red oxide primer after cleaning of existing surface for steel tubular LT pole of any size complete all as specified and directed. |
| 3 | Material and labour fluoresent Retro-reflective Tape of size not less than 50 mm width high grade quality of yellow/Red colour fixed on pole after cleaning of existing surface complete all as specified and directed. (Note : 2 run of tape (Yellow & Red) will be count one run) . Make : 3M or equivalent approved make. |
| 4 | Taking downof old unserviceable/serviceablesteel tubular pole or concrete pole of(8.50/9.0) Mtr long with necessarydemolition of concrete foundation, stay wire if anyfrom existing position and kept in safe place for reusing of serviceable pole including excavation & earth work as reqd and removing complete all as specified and directed. |
| 5 | Fixing, transporting, errectingof old steel tubular pole obtained from item no. 4 at new location as directedall as specified and directed. Note : (i) Earth wks and PCC works shall be paid separately under respective items of this schedule. (ii) Cost for taking down and refixing of Old MS works/light fittings on old pole to new poles deemed to be inclusive in the quoted rate. |
| 6 | Supply and fix of stay assembly for LT poles complete, comprising of gavanised steel stranded stay wire 7/3.15mm, galvanised steel stay bow 400 x 14, galvanized steel rod 2150 mm long 20 mm dia with nut bolts and washers, steel plate 230 x 230 x 6mm thick, 2 nos thimble,including dismantling old one complete all as specified and as directed. ( Note : PCC and earth work willbe measuredand paid for seperately) |
| 7 | Supply and fix cable junction boxes IP 66/67/69weather proof for outdoor installation for loop connection of street light cable of size 205x255x112 mm (incl synthetic short entry thread metric with one piece sealing ring M32 x1.5 17-25mm, 155.32.25 - 2 nos and Locknuts M 32x1.5, 8232-01 nos and M 25x1.5, 10-17mm, 155.25.17-02 nos and Locknuts M 25x1.5, 8225-01 nos) fixed on pole steel/ PCC with suitable two flat iron clamp 25x4mm with nuts and bolts (duly painted with two coats of aluminium paint over a coat of red oxide primer) including provision for cable entry and exit and making holes on steel pole where required or directed, including dismantling old one complete all as specified and as directed.Make: HENSEL PART NO. KF 2525G or Drg No/ SHENEIDER/ RITTEL. |
| 8 | Material and labour for preparation of existing surface of Feeder pillar box /Junction Box/LT Panel and apply two coat of synthetic enamel paint by spray gun complete all as specified and directed |
| 9 | Material and labour for street light bracket made out of GI pipe light grade 40 mm dia 1.2mtr length bent to shape and reduced to required size at top upto 1.5m length by cutting, welding and well finishing including MS clamp of flat iron of size 40 x 6 mm suitable length 2 Nos complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer and dismantling old one. Make of GI pipe: JINDAL/PRAKASH/SURIYA/ZENITH |
| 10 | Material and labour for earthing complete with galvanized steel earth plate 60cmx60cmx6.00mm thick electrode, buried directly in ground (earth pit not less than 2.25mtr below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to earth lead of of 4mm dia galvanised iron or steel wireby means of bolts, nuts, check nuts and washer of GI or steel as required and provision of earth lead protection pipe 40 mm dia GI (medium grade) upto 7.5 meters and connected to earth bar, watering pipe with 20mm dia GI (medium grade), funnel, wire mesh, alternate layers of charcoal and salt as ordered including excavation and earth work, PCC 1:3:6 type C-2 pit, 50mm thick, Pre-cast RCC (1:1.5:3) type A-1 cover including 8mm dia deformed/TMT bars @ 150mm C/C both way, etc completeas shown in electrical Plate No.3 of SSR Part-I (2009) and connected to earthing test point including test point terminal box compete all as specified anddirected including testing on completion. Make of GI pipe: JINDAL/PRAKASH/SURIYA/ZENITHNote : To optimization of earthing earth pit-shall be filledwith vegitated black cotten soil and removal of surpls soil the cost for the same shall deemed to be inclusive in the quoted rate. |
| 11 | Supply and fixing MCCB, adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 36 KA breaking capacity, rating 400 Amps including all fixing accessories with both ends spreader links-02 No. after taking down old one. (Make :-Legrand/L&T/Havells/Indoasian) |
| 12 | Supply and fixing MCCB, adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 36 KA breaking capacity, rating 200 Amps including all fixing accessories with both ends spreader links-02 No. after taking down old one. (Make :-Legrand/L&T/Havells/Indoasian) |
| 13 | Supply and fixing MCCB, adjustable thermal magnetic release type, 3 poles, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity, rating 125 Amps including all fixing accessories with both ends spreader links-02 No . after taking down old one. (Make :-Legrand/L&T/Havells/Indoasian) |
| 14 | Supply and fixing MCCB, adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity, rating 63 Amps including all fixing accessories with both ends spreader links-02 No . after taking down old one. (Make :-Legrand/L&T/Havells/Indoasian) |
