Uttar Pradesh Housing And Development Board-UPAVP has published Tender For Construction Of 11 Kv Line 33/11 Kv Sub-Station Sector-3A To Pmay Sector-8A At Jagrati Vihar (Extension) Scheme No.-11, Meerut.. Submission Date for this Tender is 08-04-2024. Transmission Line Tenders in Meerut Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | S/Erection of 11 KV section/dead end double pole structure made of 11 Mts. long410 SP-55 types of supports duly grouted. Plinthplastered and painted in the same manner as already specified for respective supports with one no. M.S. channels of size 100x50mm and 75x40mm, 2 Nos. bracing of angle iron size 50x50x6mm 3m length fixed with packing piece, bolts and nuts as required including cost of material, labour and T & P required for proper completion of work as per direction of E/I. [MAKE :- ONLY THOSE MANUFACTURER WHOSE G.T.P. IS APPROVED BY PVVNL] |
| 2 | Supply/laying of 300 Sqmm 3 Core high conductivity aluminum strand compacted circular conductor XLP (E) armoured 11KV cable neutral earthed system confirming to IS 7098-Part-II(1985) with latest amendment at a depth of 1 Mtr. Below ground level over a cushion of 75mm thick sand around and protection with brick on sides, top of cable shall be properly connected with the earth conductor by clamps etc. with the cost of all material, labour, T&P etc. required for proper completion of the work.[MAKE :-POLYCAB/ GLOSTER/ STERLITE/ L.S./HAVELL"S/ UNIVERSAL/ KEI ONLY AFTER GETTING G.T.P. APPROVED BY PVVNL] |
| 3 | Supply & Making of 85 to 240Sqmm 3 Core Indoor/ Outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as Required. |
| 4 | Indoor |
| 5 | Outdoor |
| 6 | S/F of 100mm dia (10.2kg/mts.) of G.I. pipe "B" class for cable clamped with supports by 3 Nos. clamps made of 20x3mm M.S. flat and suitable size of nut bolt and washer required for proper completion of work as per direction of E/I.[MAKE :-TATA/SAIL/JINDAL] |
| 7 | S/F of HDPE pipes (upto Pn 6kg pressure Rating material Grade PE 80, Nominal Dia (OD) 160mm 9.1mm thicknes for cable Complete in all respect as per relevants IS Technical Specification. |
| 8 | Drilling of road Parallely & road crossing at depth 2 to 3 mtr as required and laying charges of cable & Diffrent size HDPE pipe (PN-6, PE 80 grade) complete with all material, labour, drilling machine and required T&P etc. |
| 9 | Making suitable earth of H.T. overhead line pole with 2.5 Mts. long 20mm M.S rod connected with 7/16 SWGG.S. wire duly clamped & binded on pole including the cost of materials, labour and T & P required for proper completion of work as per direction of E/I. |
| 10 | S/F of danger board (H.T.) size 200x250 mm at suitable height of pole as per direction of E/I |
| 11 | S/F of barbed wire (1.5kg) duly clamped with 20x3mm M.S. flats at both ends on steel poles at suitable height as per direction of E/I. |
| 12 | Supply & Fixing of Cable Route Marker made of 1:2:4 R.C.C. Block size 1000x400x100 mm grouted with 1:3:6 cement stone grit coarse sand 30 cm below G.L. with painting numbering & marking etc. complete with all required material T&P etc. complete in all respects as per direction of E/I. (As per drawing attached) As Page No.. |
| 13 | S/F of.1.380M. longsize 100x50mmstraight M.S. channel with M.S. Clamp 75 x 10 mm M.S. Clamp for fixing up Pin Insulator Complete in all respect. As per direction of E/I.As Page No. - |
| 14 | Supply & Fixing of 2.24M long 65x65x6mm size straight M.S. Angle iron with held up 75 x 10 mm Clamp for fixing up H.T. Cable complete in all respects as per diredtion of E/I. |
| 15 | Supply & Fixing of 11 KV Pin Insulator with G.I. Pin complete in all respects as per diredtion of E/I. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
