Pradhan Mantri Gram Sadak Yojana-PMGSY has published Tender For Up Gradation Of Motor Road Work - Mrl18 - Maneri Jakhol Motor Road Upgradation( Bituminous Concrete With Waste Plastic ). Submission Date for this Tender is 07-05-2024. Road Work Tenders in uttarkashi Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 06-Apr-2024 | Corrigendum No 41 regarding date extention | Date | 27-04-2024 |
| 2 | 25-Apr-2024 | Corrigendum No 42 regarding date extention | Date | 07-05-2024 |
| 3 | 28-Apr-2024 | Corrigendum for correction in Section 3 Qualification Information of Clause 1.2 by letter no 125 | Other | 07-05-2024 |
| FileName | File Description | File Size |
| 996d1489-b3b5-491d-be81-545d4be5c2bb.html | Tender Notice | 0 KB |
| BOQ_208900.xls | Tender Document | 0 KB |
| Final_SBD-Jakhol.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Earth work in Hill Road (Hill side cutting): Excavation in hilly area for Construction of road in all types of Soils, Rocks and E&B ect. As met at site, true to lines as per Pland, L-Section, Cross Slope, Super Elevation as required, also including uprooting & cutting of bushes, dressing of road surface to the required level and slopes with all Lifts & Leads required for safe disposal of surplus excavated material at suitable dumping places indicated in Drawings by mechanical means/manual means without otherwise damaging the Forest, Forest Land, Utilities, Private and Public Properties, including Slip clearance till the completion of the work. |
| 2 | Excavation in foundation for structures in all types of soils and rocks including all lead, lift and disposal of surplus material as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014. |
| 3 | Construction of C.Rstone masonarylaidin 1:4 cement sand mortar including supply of all materials, labour, t&p & royalty etc, required for propercompletion of workasdirected by Engineer-in-chargeand MoRD specifications Clause 704.4. |
| 4 | Construction of C.Rstone masonarylaidin 1:5 cement sand mortar including supply of all materials, labour, t&p & royalty etc, required for proper completion of workasdirected by Engineer-in-chargeand MoRD specifications Clause 704.5. |
| 5 | Construction of R. R. stone masonary in cement mortar 1:5 including supply of all materials, labour, t&p & royalty etc, required for proper completion of workasdirected by Engineer-in-chargeand MORD specifications Clause 700 &1604. |
| 6 | Random rubble stone masonry for structures laid dry by locally available approved stonencluding supply of all materials, labour, T&P etc required for proper completion of work as per Drawing and MORD specification for, retaining walls, brest walls & other smimilar structures etc as per direction of Engineer-in-charge.. |
| 7 | HP stone filling in back of structures including supply of all material, labour, T&P etc. required for proper completion as directed by Engineer-in-charge andMORD specificationclause 1604.7. |
| 8 | Providing and Laying of Mechanically Woven Double Twisted Hexagonal shaped Gabions (Zinc plus PVC coated), of size 3.00mx1.00mx1.00m with two diaphragms at 1m interval, having mesh opening 100mmx120 mm,mesh wire diameter 2.7mm/3.7mm, edge/selvedge wire diameter 3.4/4.4 mm and lacing wire diameter 2.2/3.2 mm. (The work includes filling boulders in the gabions) |
| 9 | Cement plum Masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P etc. required for proper completion of the work. as per drawings and technical specifications Clause 802, 803, 1202 & 1203 of MORD Specifiction |
| 10 | Random Rubble stone masonary in Coolie walling including supply of all material, labour, T&P etc. required for proper completion of the work.(As per PWD Uttarakhand specifications) |
| 11 | Providing and laying of concrete for P.C.C grade M 10. in open foundations for structures including supply of all materials, labour,t&p & royalty etc,required for propercompletion of work as directed by Engineer-in-charge and MORDspecifications Clause 800,1202 & 1203 |
| 12 | Providing and layingof plain cement concretefor structures including supply of all materials, labour, t&p, shuttering, centering , royalty etc. required for propercompletion of workasdirected by Engineer-in-chargeand MORD SpecificationClause 800 forP.C.C grade M 25. |
| 13 | Providing and laying of concrete for R.C.C grade M 25. for super structures including supply of all materials, labour,t&p & royalty etc,required for propercompletion of work as directed by Engineer-in-charge and MORD specificationsClause 800 |
| 14 | Supplying, cutting , and placing ofHYSD bar reinforcement in superstructure complete(IS1786:2008 clause no. 1.6) Steel shallnot be fromrerolling plants and shallconform to relevent IS Codeincluding supply of all materials, labour,t&p&royalty etc,required for proper completion of work as directed by Engineer-in-charge as per MORD specification no. 1000 (Culvert, Bridge, Causeway, Scupper etc.) |
| 15 | Supply, fitting and placing HYSD bar reinforcement in substructure complete as per drawing and technical specification Clauses 1002, 1005,1010 & 1202 & as per MORD |
| 16 | Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire (@ 32 Kg/ 10 Sqm) conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg eachas per drawing andtechnical specificationsClause 1301 |
| 17 | Drainage spouts complete as per drawing and technical specifications Clause 1209 |
| 18 | supplying and laying of NP3 hume pipe |
| 19 | Pointing with cement mortar 1:3 including supply of all materials, labour,t&p&royalty etc,required for propercompletion of workasdirected by Engineer-in-chargeand MORDspecificationsClausesNo.613.3 |
| 20 | Providing and layingof concrete for plain concretefor substructure including supply of all materials, labour,T&P,royalty etc. required for propercompletion of workasdirected by Engineer-in-chargeand MORD Specification for Rural Roads 2014.P.C.C gradeM 20. |
| 21 | Repairs of damages caused by rain/spillage of waterPreparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimming to the required line, grade, profile and rolling with three wheel 80-100 kN static roller, complete as per Technical Specification Clause 301.5.5.1 (Sub grade preparation) |
| 22 | 15 mm thick Plasteringwith cement mortar 1:4 including supply of all materials, labour,t&p&royalty etc,required for proper completion of work as directed by Engineer-in-chargeand MORDspecificationsClausesNo.613.4. |
| 23 | White washing of parapet walls of CD work and tree truncks White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1915 |
| 24 | Construction of unlined surface drains (trapezoidal) of average cross-sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307. |
| 25 | Providing and fixing in position pipe railing consisting of IS Rolled steel joist posts designation IS MB 100 (100x75) at 2.5 m interval and three rows of 50 mm dia steel pipes (light) including fixing in position on bridge deck complete as per drawing and technical specifications Clause 1208.2 |
| 26 | Construction of Embankment of Sub grade preparation Pattri filling with Material Obtained from Roadway Cutting Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5. |
| 27 | Making of Super Elevation Excavation of cutting in soil by manual means with lead upto 50 m Excavation for roadway in soil using manual means for carrying of cut earth to embank ment site with a lift upto 1.50 m and lead upto 50 m as per Technical Specification Clouse 302.3 |
| 28 | Dismantling offlexible pavements and disposal ofdismantled materialsupto alead of 100 m, stacking serviceable and unserviceable materials separately as per Technical Specification Clause 202 |
| 29 | Granular sub-base/base/surface course with local materials Using naturally occuring gravel, Local GSB (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical (Using naturally occuring gravelSpecification Clause 408. |
| 30 | WBM Grading 2 By Mechanical Means Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, crushable stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. |
| 31 | WBM Grading 3 By Mechanical Means Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, crushable stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. |
| 32 | Prime Coat Low porosity Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502. |
| 33 | Tack Coat Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 34 | BProviding and laying Bituminous Concrete with the use of batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. (Using Shreded Waste Plastic Technology, specifications as per IRC SP 98 or Latest guidline issued by NRIDA).. |
| 35 | AFP(Aluminum-backed flexible prismatic sheeting) Hazard Marker: Providing and fixing Aluminum-backed flexible prismatic sheeting consisting of Yellow colored flexible prismatic sheeting with non-metallic prismatic lens as retro reflective elements and conforming to ASTM D 4956-09 Type VI specification values for reboundable sheeting. AFP sheeting shall be of 1ft width and laminated at the back with a 50 micron thick Aluminum (Al) foil with pressure sensitive adhesive and liner. AFP sheeting shall have screen printed arrow/slant line pattern in black color on top & shallnot crack when testedfor flexibility as persection S2.2.2of ASTM D 4956-09. The AFP sheeting shall be applied with a neoprene contact adhesive with Polychloroprene as base & the edges of the product shall be sealed all around with a two-part epoxy based structural adhesive and shall be extremely resistant to peel-off & product specification shall confirm to IRC Accreditation. |
| 36 | Road Studs / Cat Eye Providing and fixing Bi-directional Road Studs (Cat Eye) / Reflective Pavement Marker (RPM) with single body twin shank and plastic body moulded from ASA (Acrylic Styrene Acrylonitrite) or HIPS (Hi-impact Polystyrene) or ABS (Acrylonitrile Butadiene Styrene) or any other suitablematerialapproved byEngineer incharge (Marker must supporta load of13635 kg tested in accordance with ASTM D 4280 and Reflective lenses conforming to ASTM D 788 or equivalent) bonded or anchored within the road surface for lane marking and delineation for night time visibility as per Clause No. 1707 of MORD and 804 of MORTH specifications. The RPM must have reflective panels with micro prismatic lens where area of each retro reflective surface shall not be less than |
| 37 | Solar Road Studs Providing and fixing Solar Powered Road Studs (Rectangular) of size not less than 100mm x 100 mm x 10 mm or (Circular) of dia 130+/- 6mm and height 30 +/- 2mm (with 8 super bright LEDs for long visibility from distance greater than 800 m) having twin shank and body made of aluminium alloy and poly carbonate material which shall be absolutely weather resistant and strong enough to support a load of 13635 kg tested in accordance with ASTM D 4280 and water resistance as per IP 65 in accordance with IS 12063:1987, fixed to the road surface using adhesives and the procedure recommended by the manufacturer as per Clause No. 804.6 and 804.7 of MORTH specifications. |
| 38 | Road Delineators / Vertical Guide Posts: Providing and fixing of Standard Metal Delineator consisting of minimum retro reflective unit exposed area of 330 sqcm, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron. The posts shall have ellipsoidal orcircular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 anchored with PCC M-15 onto the ground. The front and back faces of the delineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20o and 30 o, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have sufficient arrangement to make the reflective sheets vandal-proof. Including all test report and warranties as per IRC 67 and IRC 79. |
| 39 | Providing and laying of hot applied thermoplastic compound of ISI Mark Approved Quality of 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. |
| 40 | Type - A, "W" : Metal Beam Crash Barrier Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 ( if Concrete Required for Vertical post Fixing will be paid extra) |
| 41 | Providing and fixing of. Edge Stones 12cm x 12cm x 60cm size precast in M15 cement concrete with 4 nos. 8 mm dia HYSD vertical bars and 3 nos 6mm dia MS bar stirrups as per approved drawing including two coat white washingon valley side of formation. |
| 42 | Providing and fixing of kilometer stone as per standard drawing made of precast R:C:C 1:2:4 fixed with C.C 1:3:6 including excavation of pit, painting and printing letters on kilometer stone with two coat of approved synthetic enamel paint of approved . |
| 43 | Same as above item No. but for Hectometer stone |
| 44 | Same as above item No. but for 5th Km. stone |
| 45 | Providing and fixing of PMGSY Logo board at end point and every 2 Km, as per attached standard drawing duly painted and writen as per MORD specification and direction by Engineer in charge |
| 46 | Providing and fixing of Title Information Board with PMGSY Logo at suitable place in the starting of the road as per attached standard drawing duly painted and writen as per MORD specification and direction by Engineer in charge |
| 47 | Providing and fixing of Citizen information board with PMGSY Logo at at starting and prominent location (where maximum no. of fitizens can view the detail of the road)as per attached standard drawing duly painted and writen as per MORD specification and direction by Engineer in charge |
| 48 | Providing and fixing of Maintenance information board with PMGSY Logo at at starting and prominent location (where maximum no. of fitizens can view the detail of the road)as per attached standard drawing duly painted and writen as per MORD specification and direction by Engineer in charge |
| 49 | Providing and fixing of semi reflective trafic sign board (cautionary, mandatory and informatory) sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD 2014. 900 mm equilateral triangle |
| 50 | Same as above item No. but for 600 mm circular |
| 51 | Same as above item No. but for 600 mm x 450 mm rectangular |
| 52 | Providing and fixing of semi reflective Direction and Place identification sign boards more then 0.90 sqm as per attached drawing and direction by Engineer in charge |
| 53 | Under PBMC |
| 54 | 1] Trimming of grass and weeds from the shoulders/berms and disposing off the same to suitable locations as per technical specifications Clause 1914. 2] Maintenance of road side Drains includingminor slip clearence , reshaping ,deepening and ,regrading ,as well ascatch water drains as per technical specification Clause 1907. 3]Maintenance of shoulders to the required level by filling/cutting the soil and its compacting including disposal of the surplus materialin approved muck disposal points as per specification clause 1903. 4] Maintenance of scuppers &Culverts by way of clearing, Cleaning, Erosion repair, repairs to cracks, parapet walls and Protection works as per drawing and technical specification Clasue 1908. 5] Maintenance of Causeway by way of minor Surface repairs, replacing Guide Posts, repair of flood gauges, removal of debris, providing boulders and protection work and painting as per technical specification Clause 1909. 6] Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as per drawings and technical specification Clause 1910. 7] Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technical specification Clause 1912. 8} Repairing of potholes by removal ofloose material, trimming ofsids, cleaning of surface and providing tack coat bitumen imulsion and patch repair with 20 mm thick premix carpeting and Type B seal coatusing bitumen or catonic bitumen imulsion(in 3rd and 5th year). 9] Two coatwhite washing onparapet walls of CD work ,edge stones, tree truncks, and prominent rock patches on hill sides including preparation of surface by cleaning scraping etc. as per technical specifications Clause 191. |
| 55 | Ist Year |
| 56 | 2nd Year |
| 57 | 3rd Year |
| 58 | 4th Year |
| 59 | 5th Year |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
