Purvanchal Vidyut Vitaran Nigam Limited has published Tender For Shifting Of 33 Kv, 11 Kv, Lt Line And Transformer Ravat Bhiti Gorakhpur. Submission Date for this Tender is 26-03-2024. Overhead Line Tenders in gorakhpur Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Part A (Materials Provided by contractor) |
2 | ST Pole 9 m long |
3 | ST Pole 11 m long |
4 | ACSR weasel Conductor |
5 | ACSR Dog Conductor |
6 | 3x400 mm² ‘XLPE’ cable 33 KV |
7 | 3x300 mm² ‘XLPE’ cable 33 KV |
8 | 3x185 mm² ‘XLPE’ cable 11 KV |
9 | 1x16 mm² LT cable |
10 | 2x10 mm² LT cable |
11 | 4x16 mm² LT cable |
12 | 3x95+1x70+1x16 mm² LT AB Cable |
13 | 4x25 mm² LT cable |
14 | 1x400 mm² LT Cable |
15 | 3.5x150 mm² LT Cable |
16 | 33 KV ‘XLPE’ C/J Kit 3x400 mm² Outdoor |
17 | 33 KV ‘XLPE’ C/J Kit 3x400 mm² St. through |
18 | 33 KV ‘XLPE’ C/J Kit 3x300 mm² Outdoor |
19 | 33 KV ‘XLPE’ C/J Kit 3x300 mm² St. through |
20 | 11 KV ‘XLPE’ C/J Kit 3x185mm² Outdoor |
21 | 11 KV ‘XLPE’ C/J Kit 3x185mm² St. Through |
22 | 33 KV feeder Pillar box |
23 | Number Plate with Clamp |
24 | Danger Board with Clamp |
25 | Barbed wire |
26 | Bolts, Nuts, & Washers |
27 | LT Schakle Insulator |
28 | MS Earthing Rod 20x2500 mm |
29 | GI wire 5 mm |
30 | LT AB Cable clamp with nut & bolt |
31 | I Hook |
32 | I clamp |
33 | Suspension clamp |
34 | Neutral PRC |
35 | Al. Paint |
36 | Red oxide Paint |
37 | 11 KV Top channel 100x50x2240 mm |
38 | 11 KV Cross Bracing Angle |
39 | 11 KV Top channel/Bracing angle clamp with nut bolt for ST Pole with nut bolt by 50x8 mm MS flat Iron make |
40 | Extra angle for cable support |
41 | Clamp for extra angle support |
42 | 11 KV Polymer Disc Insulator |
43 | 11 KV Polymer Disc fitting |
44 | PG clamp for weasel |
45 | 11 KV Stay Rod 16x1800 mm |
46 | 11 KV Stay clamp for ST Pole with Nut and Bolt by 50x8 mm MS Flat Iron make. |
47 | Stay wire 7/10 SWG |
48 | Different size al. lug as per requirement |
49 | New 100 KVA T/F |
50 | MS channel T-off 125x65x1300 mm |
51 | Clamp for T off |
52 | 11 KV TPMO |
53 | LT incoming pannel with metering equipment |
54 | Copper L piece 50x225x10 mm (LS) |
55 | MS channel Dropper for fuse set 100x50x2028 mm |
56 | T/F Base angle 75x75x6x2028 mm |
57 | Copper Z clamp |
58 | FRP fencing for T/F safety |
59 | Distribution Box (with pearsing connector, A clamp and other require materials) |
60 | Holding clamp for TPMO & fuse set and other. |
61 | 4 core MCB with Box (LS) |
62 | Clamp for Distribution box |
63 | Clamp for T/F |
64 | Eye bolt for service cale |
65 | 33 KV Top channel 125X65X3200 mm with clamp |
66 | 33 KV M.S. Angle Iron 65x65x6mm bracing with clamps |
67 | 33 KV Polymer Disc Insulator B&S type |
68 | 33 KV Polymer Disc Fitting |
69 | PG clamp for Dog conductor |
70 | 33 KV Stay Rod (20x1800MM) |
71 | 33 KV Stay clamp |
72 | Stay wire 7/8 SWG |
73 | PART - B- WORK |
74 | Erection of Single pole structure on 9 mtr ST Pole for LT AB Cable including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (LT clamps with bolt and nut danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete). |
75 | Erection of Double pole structure on 9 mtr ST Pole for 11 KVcable rising including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories for(M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 100 x 50 x 2240 mm with clamps, danger board with clamp,Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) . |
76 | Erection of Double pole structure on 11 mtr ST Pole for 11 KVone side overhead and one side cable rising including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories for(M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 100 x 50 x 2240 mm with clamps, danger board with clamp,Aluminium paint, red oxide paint, barbed wire earthing, etc. complete). |
77 | Erection of Double pole structure on 11 mtr ST Pole for 33 KVone side O/H and one side cable rising including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories for(M.S. angle iron bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp,Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) . |
78 | Erection of Double pole structure on 9 mtr ST Pole for 33 KVonly cable rising including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories for(M.S. angle iron bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp,Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) . |
79 | Erection of Four pole structure on 11 mtr ST Pole for 33 KVone side O/H and one side cable rising including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories for(M.S. angle iron bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp,Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) . |
80 | Installation of distribution Box |
81 | Labour charges for Hanging of LT AB Cable on new erected pole with LT AB Cable clamp complete. |
82 | Making plinth, Installation of feeder pillar box, connection, earthing and complete work. |
83 | Dismantling, shifting and Relaying (Hanging) of Existing LT AB Cable on new erected Pole as much as possible. |
84 | Charges for making section and jumpering with related Weasel/Dog conductor as per site requirement. |
85 | Laying of 33 KV 3x400 mm² ‘XLPE’ cable(D/C) by digging pit & making trench in Proper size (1M depth x1M wide) below ground level by fixing bricks(4½?) on both side of trench wall and 9? brick work at the centre of the trench along the cable. Fixing brick slab on top after filling sand around both the cable including cost of bricks and sand/HDD Method as per site required. |
86 | Extra cost for drilling horizontal hole 2 Mtr below the road & inserting 6” dia. HDPE Pipe PN-8 as per RESSPO for passing of 33 KV XLPE cable 3x400 mm² for Road /Pulliya Crossing at different places in the path of Laying of cable. (Complete work with Materials provided by contractor) |
87 | Laying of 33 KV 3x300 mm² ‘XLPE’ cable(D/C) by digging pit & making trench in Proper size (1M depth x1M wide) below ground level by fixing bricks(4½?) on both side of trench wall and 9? brick work at the centre of the trench along the cable. Fixing brick slab on top after filling sand around both the cable including cost of bricks and sand/HDD Method as per site required. |
88 | Extra cost for drilling horizontal hole 2 Mtr below the road & inserting 6” dia. HDPE Pipe PN-6 as per RESSPO for passing of 33 KV XLPE cable 3x300 mm² for Road /Pulliya Crossing at different places in the path of Laying of cable. (Complete work with Materials provided by contractor) |
89 | Laying of 11 KV (D/C) & LT cable by digging pit & making trench in Proper size (1M depth x1M wide) below ground level by fixing bricks(4½?) on both side of trench wall and 9? brick work at the centre of the trench along the cable. Fixing brick slab on top after filling sand around both the cable including cost of bricks and sand/HDD Method as per site required. |
90 | Extra cost for drilling horizontal hole 2 Mtr below the road & inserting 6” dia. HDPE Pipe PN-6 as per RESSPO for passing of 11 KV XLPE cable 3x185 mm² for Four lane /Pulliya Crossing at different places in the path of Laying of cable. (Complete work with Materials provided by contractor) |
91 | Rising of 33&11 KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work. |
92 | Jointing charge of 33 KV ‘XLPE’ C/J Kit Outdoor & Straight Through. |
93 | jointing charges of 11 KV XLPE C/J Kit Outdoor/Straight through. |
94 | special Pipe Earthing Complete for Cable jointing Kit with materials provided by contractor. |
95 | Disconnection and Reconnection of Existing LT cable connection in the path of Shifting of line as per follwoing details. |
96 | L.T. and Domestic Consumer connection cable. |
97 | Commercial and Power Consumer Connection cable. |
98 | Shifting, loading, Carriage and re-installation of Existing 400/250 kVA T/F From Existing place to Shifted Place with installation related all materials i.e. erection of pole and installation of fitting and equipment. as per site requirement and instruction of supervision authority. (including T/F plinth, installation of FRP fencing and earthing) |
99 | Providing and installation of New 100 KVA T/F 11/0.4 KV For Avoid Road crossing with installation related all materials i.e. erection of pole and installation of fitting and equipment. as per site requirement and instruction of supervision authority. |
100 | Shifting, loading, Carriage and re-installation of Existing 16/10 kVA T/F From Existing place to Shifted Place with installation related all materials i.e. erection of pole and installation of fitting and equipment. as per site requirement and instruction of supervision authority. (include earthing) |
101 | Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension. |
102 | Grouting of stay rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension. |
103 | Dismentling charges of existing Single Pole 9 mtr. ST Pole. |
104 | Dismentling charges of existing Single Pole 11 mtr. ST Pole. |
105 | Dismentling charges of existing Double Pole 11mtr. ST Pole. |
106 | Dismentling charges of existing Single pole on PCC Pole 8.5 mtr. |
107 | Dismentling charges of existing Single Pole 11 mtr. Rail/Joist Pole. |
108 | Dismentling charges of existing Double Pole 11mtr. Rail/Joist Pole. |
109 | Dismentling charges of existing Four Pole 11mtr. ST Pole. |
110 | Dismentaling of old ACSR Dog conductor and rolling in pieces. |
111 | Dismentaling of old ACSR Weasel conductor and rolling in pieces. |
112 | Shifting, Loading, Carriage & Unloading of old and damaged 33/11 KV/LT Line materials from work site to Store centre Gorkahpur Distt. Gorakhpur. |
113 | Cost for NOC from NHAI, Forest department & etc. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail