Tender For Contract For Renovation Work Of Vishranti & Vasundhra Guest House Rooms And Sc/St Office In Township Area
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Apr 2024
0 days left
EMD
25000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
vijaipur → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Contract For Renovation Work Of Vishranti & Vasundhra Guest House Rooms And Sc / St Office In Township Area
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation in areas or foundations,trenches, pits, drains pits including dressing of sides and ramming of bottomsincluding getting out the excavated soil in:a) Black cotton soil/ yellow soil / moorum etc. |
| 2 | Providing and laying cement concrete in foundation,footing, sub bases of pavements, floors, beds excluding cost of centring and shuttering complete.1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20/12.5 mm size) |
| 3 | Providing and laying reinforced cement concrete in foundation, footing, sub bases of pavements, floors, beds excluding cost of centring and shuttering complete.1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20/12.5 mm size) |
| 4 | Brickwork with locally available bricks in foundations and plinth in cement mortar 1:6 (1 cement: 6 coarse sand). |
| 5 | Preparing surfaces of masonry and applying cement plaster 1:6 (1 cement: 6 fine sand) 12 mm thick. |
| 6 | Preparing surfaces of masonry and applying cement plaster 1:6 (1 cement: 6 fine sand) 15 mm thick. |
| 7 | Centering and shuttering including strutting,propping etc.,and removal of form work for foundations, walls, suspended floors etc. |
| 8 | Demolishing cement concrete in pavements, floors,plinth protections and sub bases in fence posts,pedestals including disposal of all materials to the approved dumping area as directed by Engineer-in-Charge. |
| 9 | Demolishing brick work/stone work including stacking of serviceable material and disposal of unserviceable material to the approved dumping area as directed by EIC. |
| 10 | Carriage of available surplus excavated earth /rock / construction debris by mechanical transport or any other means including,loading unloading and disposal of excavated earth / rock /construction debris any where in NFL complex /township area;disposed earth to be levelled and dressed as per directions of Engineer-in-Charge. |
| 11 | Providing and laying Vitrified tiles in floor with size 600X600mm (thickness to be specified by the manufacturer),with water absorption less than 0.08% and conforming to IS:15622, of approved brand &manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including chipping of floor and grouting of joints as per instruction of Engineer In Charge.Tiles shall be of following Manufacturer/ make only :- Kajaria ceramic, hindware homs ltd. , Somany ceramic, H R Johnson tiles Orient bell ltd, Varmora tiles Cera tiles India |
| 12 | Providing and laying matt finish good qualityCeramic tiles of approved make, shade, colour and patternof minimum thickness 8 mm in flooring, walls, working bench tops, dados in toilets&sides of kitchen shelves laid on a bed of 12 mm thickcement mortar 1:3 (1 cement: 3 fine sand) finished with flush pointing in white cement/matching colour complete.Tiles shall be of following Manufacturer/ make only :- Kajaria ceramic, Hindware Homs ltd. , Somany ceramic, H R Johnson tiles Orient bell ltd, Varmora tiles Cera tiles india. |
| 13 | Providing and fixing pressed steel Door/Window frames manufactured from commercial mild steel sheet of 1.25 mm thickness including hinge jamb,lock jamb, head and if requiredangle threshold of MSflat of section 50x25 mmor base ties of 1.25 mm pressed MS welded, adjustable lugs with split and tail to each jamb including MS butt hinges 2.5 mm thick with mortar guards, lockstrike plate and applying a coat of good quality steelprimer complete including removing the old damaged door/window frame as per directions of Engineer-in-Charge. |
| 14 | Fixing new panelled door shutters with12 mm thick commercial ply ofgood qaulity quality and manufacture with commercial veneering on both faces, all frame members of the shutters shall be straight, out of one piece without any warp or bow , including welding of MS butt hinges wherever required. |
| 15 | Providing fixing new fly proof wire gaugewindow shutters using galvanised MS wire gauge of designation 85 G with wire of dia 0.56 mm including welding of MS butt hinges wherever required. |
| 16 | Reinforcement for RCC work including cutting,bending, binding and placing in position complete using cold twisted bars or plain mild steel bars. |
| 17 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes confirming to IS 13592, Type A including jointing with seal ring leaving 10 mm gap for thermal expansion, Single socketed pipes |
| 18 | i) 110 mm diameter. |
| 19 | ii)Tee 110 mm diameter |
| 20 | iii)Bend 110 mm diameter |
| 21 | Providing & Fixing CP brass angle valve of approved quality for wash basin/geyser points.(15mm nominal bore) |
| 22 | Providing & Fixing CP brass connection pipe of approved quality with CP brass unions :a) 30/45 cm. Length 10/12 mm nominal bore |
| 23 | Providing and fixing CP brass toilet paper holder. |
| 24 | Providing and fixing CP brass bib cock long body with minimum length of 162 mm of approved quality.a) 15 mm dia. with long handle. |
| 25 | Providing and fixing of Stainless steel kitchen sink as per IS 13983 with CI brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls whever required. |
| 26 | Providing and fixing 600x120 mm glass shelf, edges rounded off and supported on aluminium angle frame with CP brackets and guard rail includingfixingwithwooden cleats, screws and washers and removal of old glass shelf complete ( 4 mm thick plain glass shall be used). |
| 27 | Providing and fixing CP brass towel rail 600 mm long 20 mm dia. with brackets including removal ofold rail, fixing new rail with screws on wooden plugs complete. |
| 28 | Supply & Installation of Pedestal washbasin PEDESTAL WASH BASIN of make only : Kohler ,Hindware, Jonhson,Kerovit,Jaquar, Cera, Parryware Conformityto Indian Standard IS: 2556 (Part -4) Latest Pattern Flat Back Weightof the Basin not less than 6000grams Height of the Pedestal not less than 96 cm Fixing ArrangementWall Hung WARANTEE 1 Year. |
| 29 | Supply & Installation of EWC2 in 1 with seat cover, EWC should be of following make only :-Kohler ,Hindware,Jonhson,Kerovit,Jaquar, Cera, Parryware Conformity to Indian Standard IS:2556 (Part-2) Latest Colour of Toilet Seat & Cover White WARANTEE PERIOD 1 Year |
| 30 | Supply & Installation Hand Shower/Health Faucet of Reputed Brand with following specifications:- Cast Brass Grade LCB-2 ofIS:292/1983 Inlet Length of Shower Pipe :1.5 m |
| 31 | Supply & Installation Basin mixer Taps of following make only :- Kohler ,Hindware, Jaquar, Cera,Johnson,Kerovit, Parryware with following specifications(Confirming to IS 8931/1993) ALL the body partsshall be of Brass Material Nominal Size 15(mm) Tap shall be Nickel Chrome Plated Aerator Device Fitted with Pillar TapMinimum Weight of the Tap 800(gram)Conform toIndian Standard IS:8931 Latest ISI marked |
| 32 | Supply & Installation Wall mixer Taps of following make only :- Kohler ,Hindware, Jaquar, Cera,Johnson,Kerovit, Parryware with following specifications Wall Mounting Combination Tap assembly (Confirming to IS 8931/1993) ALL the body partsshall be of Brass Material Nominal Size 15(mm) Tap shall be Nickel Chrome Plated Aerator Device Fitted with Pillar TapMinimum Weight of the Tap 800(gram)Conform toIndian Standard IS:8931 Latest ISI marked |
| 33 | Supplying and fixing fully glazed (15 micron) electrostatic powder coated (25 of approved shade) Aluminum doors/windows \"Indal\" or approved equivalent make extruded tubular aluminum section of minimum 2.50 mmthickness & 6.3 mm laminated safety glass fixed with rubber lining & anodized aluminum beading including fixing the frame to masonry/RCC with 16 mm wide 8.2 mm thick 100 mm x 70 mm galvanized L shaped slotted steel lugs screwed to the frame @ 600 mm maximum by counter sunk galvanized machine screws and fixed to masonry by grouting with M-15 grade concrete in minimum150 mm x150 mm x 50 mm size hole/96mm long 12 mm dia. dashfasteners, finishing and making good of any damaged work etc. all complete including making hole in the walls wherever required :Aluminum glazed door/window/ventilator (openable or fixed) with cup pivots of aluminium alloy conforming to IS designation NS-4 of IS 737 and IS designation A-5 M ofIS:617 and / IS: 2209 with aluminium handle on both sides, tower bolt, sliding bolt, safety lock and all fittings etc .complete for each shutter with plain anodized aluminum sections. |
| 34 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (woodpowder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge),minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Frame size 45 x 85 mm |
| 35 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. |
| 36 | Providing and fixing looking mirror of size 600x450mm of superior glass of good qaulity quality and make including providing and fixing asbestos sheet ground with screws wherever required complete. |
| 37 | Providing and fixing curtain rod of SS conduit pipes of 20 mm dia. and of required length complete. ( with brackets) |
| 38 | Taking out existing damaged door shutters and providing& fixing new panelled door shutters with12 mm thick commercial ply ofgood qaulity quality and manufacture with commercial veneering on both faces, all frame members of the shutters shall be straight, out of one piece without any warp or bow , including welding of MS butt hinges wherever required, removal of handles/ tower bolts/locking bolt from old shutters and refixing the same to new shutters with necessary screws |
AI Tender Summary
Tender Timeline
Mar 19, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedApr 22, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 23, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender