Urban Improvement Trust-UIT has published Tender For Construction Of Yoga Shed, Installation Of Various Gym Equipment And Swing In Devasish City Police Line. Submission Date for this Tender is 13-05-2024. Cutting Crimping and Punching Tools Tenders in kota Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 21-Mar-2024 | Corrigendum Date Extend | Date | 18-04-2024 |
| 2 | 18-Apr-2024 | Corrigendum2 | Date | 02-05-2024 |
| 3 | 02-May-2024 | Corrigendum3 | Date | 13-05-2024 |
| FileName | File Description | File Size |
| 4ecf67bb-36fd-4049-90ea-eebd12ec9225.html | Tender Notice | 0 KB |
| BOQ_694269.xls | Tender Document | 0 KB |
| Special_Condition_23.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. |
| 2 | 1: 3: 6 or richer mix. |
| 3 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils |
| 4 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. |
| 5 | M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). |
| 6 | Providing and laying in position specified grade ofcement concrete forall RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix |
| 7 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. |
| 8 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ("Original producers" who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) |
| 9 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : |
| 11 | Two or more coats on new work |
| 12 | Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. |
| 13 | Providing and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of size. |
| 14 | Welded mesh 50 mmx 25 mm x 2.1 mm |
| 15 | Providing and Fixing corrugated colour G.I sheet having thickness 0.50mm roofing fixed with G.I.J or L Hooks bolts and nuts 8mm dia meetr with bitumen and G.I Limpet washers or with G.I Limpet washers filled with white lead and including over lapping of sheet complete ( upto a pitch of 60 degree) & excluding the cost of purlins rafters and trusses etc complete in all respect. |
| 16 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 17 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. |
| 18 | M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size). |
| 19 | Double Swing : Double Swing is suitable for 4 to 14 years Children and frame is made of NB pipes which should be following specifications : Area : 3.0 mtr x 2.50mtr. Safe play area : 4.0 mtr x 3.50 mtr. Height : 2.40 mtr. (on ground level) Leg support : 40mm NB pipes Top bar : 50mm NB pipe Seat : 9mm thick reinforced rubber (Non skid chequired top, bearing : Housing special casting heavy duty bail bearing, suspension : 7mm dia Electro Galvanized chain |
| 20 | Single See Saw : The Single See Saw suitable for 4 to 8 years children and made of MS pipes which should be following specification : Area Required : 1.50 mtr.x 3.0 mtr. Height : 0.90 mtr. Main Pipe : 50 NB pipe Plank : 40 NB pipe Handle : 20 NB pipe Seats : MsS sheet (5mm thick) FRP |
| 21 | Parallel bars : Parallel Bars is suitable for 10 to 16 years children and main verticle frame made of 50mm NB pipe and horizontal bars made of 32mm NB pipes. Horizontal bars having length 2.10 mtr. and height is 1.20 mtr. On ground level. Total area of this parallel is 2.0 mtr. x 1.0 mtr. |
| 22 | Up and Down Ladder : Providing and Fixing of up-down ladder made out of MS pipe 40mm, 25mm size of length 10xheight should be less than 6" pipe should be ISI marked of heavy weight. |
| 23 | Wave Slide : The sliding chute of wave slide is made of 6mm thick fibre glass reinforced plastic. (Binani or equivalent make) with a smooth surface consist of 3 sliding mould of 2.00 ft. (approx). The platform made out of 10 gauge MS sheet and shall be supported on 33mm OD 14 gauge. The ladder shall be 60cm wide (approx) and will be made of 25mm NP pipe with 15mm dual steps. The slide shall be supported on three parallel supports of different length. the size of the slide above the ground level shall be as follows platform height 2.40, slide length 4.20m and slide width 0.50 mtr. (approx) |
| 24 | S/F of following outdoor Gym (fitness) Equipment including excavation of foundation in all kind of soil/hard roack. construction of foundation as per requirement of Gym Equipment or atleast 0.40x0.40x0.60m size in RCC M-20 mix or as per direction of engineer in charge. Gym equipment should be as per enclosed drawing and design in special conditions folowing make Kilkari/Regal/Arihant/Arogyam. |
| 25 | Double Bar: Features : -H-4"6", L-6"6", W-3" -4 Inch Dia. Galvanized Steel Pipe -Handle 1/1.25 inch Dia. M.S. Pipe Powder Coated 100-110 microns |
| 26 | Sit Up Board: Features : -H-3"9", L-4"6", W-2"1" -4 Inch Dia. Galvanized Steel Pipe -Handle 1/1.25 inch Dia. M.S. Pipe Powder Coated 100-110 microns |
| 27 | Double Surf Board: Features : -H-4"4", L-3"10", W-3"2" -4 Inch Dia. Galvanized Steel Pipe -Handle 1/1.25 inch Dia. M.S. Pipe -Powder Coated 100-110 microns - FRP Foot Rest |
| 28 | Sky Walker: Features : -H-4"8", L-5"1", W-1"8" -4 Inch Dia. Galvanized Steel Pipe -Handle 1/1.25 inch Dia. M.S. Pipe - Powder Coated 100-110 microns - FRP Seat & Foot Rest |
| 29 | Cross Trainer: Features : -H-5"3", L-4"5", W-1"11" -3 Inch Dia. Galvanized Steel Pipe -Handle 1/1.25 inch Dia. M.S. Pipe - Powder Coated 100-110 microns - FRP Seat & Foot Rest |
| 30 | Shoulder Builder Triple: Features : -H-6"3", L-4"8", W-3"6" -3 Inch Dia. Galvanized Steel Pipe -Handle 1/1.25 inch Dia. M.S. Pipe - Powder Coated 100-110 microns |
| 31 | Double Twister Seating : Features : -H-4"4", L-7"1", W-2"2" -4 Inch Dia. Galvanized Steel Pipe -Handle 1/1.25 inch Dia. M.S. Pipe - Powder Coated 100-110 microns |
| 32 | Ches Press Double: Features : -H-6"8", L-5"5", W-2"3" -4 Inch Dia. Galvanized Steel Pipe -Handle 1/1.25 inch Dia. M.S. Pipe - Powder Coated 100-110 microns - FRP Seat & Foot Rest |
| 33 | Rower Double: Features : -H-3"8", L-7"6", W-2"7" - 2x2 Inch Square CRCA Pipe -Handle 1/1.25 inch Dia. M.S. Pipe - Powder Coated 100-110 microns - FRP Seat & Foot Rest |
| 34 | Peck Deck Double: Features : -H-6"2", L-6"1", W-3,2" -3 Inch Dia, Galvanized Steel Pipe -Handle 1/1.25 inch Dia. M.S. Pipe - Powder Coated 100-110 microns - FRP Seat & Foot Rest |
| 35 | Leg Press Double: Features : -H-5"8", L-6"4", W-1"7" -4 Inch Dia. Galvanized Steel Pipe -Handle 1/1.25 inch Dia. M.S. Pipe - Powder Coated 100-110 microns - FRP Seat & Foot Rest |
| 36 | Providing and supplying of Garden bench (Victorian) at site both side of garden bench is made of cast iron having back height of 720 mm and seating height of 390 mm (approx.) it may vary at some places and both side of Garden bench is connected with 10 Nos. MS tube of rectangular section size 65×25×3mm having length of 1520 mm for seating purpose with extra support 25×5 mm MS flat for extra stability. All sharp and rough edges of bench is to be grinded with grinder and all fill up with m-seal, and fixed at required position and this bench is having the provision of hold & fast system weight not less than 95Kg(for grouting) bench is complete with a coat of 1st class red oxide and with three coats of synthetic enamel of 1st class quality paint in green colour finally bench is assembled with nuts and fixing at the site complete with the direction of E-I-C. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
