Orissa Tourism Development Corporation Limited has published Tender For Barkul Peripheral Development At Khordha.. Submission Date for this Tender is 08-04-2024. Civil Work Tenders in khordha Odisha. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 03-Apr-2024 | Barkul Peripherial Development at Khordha. | Date | 08-04-2024 |
| Sl. No. | Item Description |
| 1 | Civil works |
| 2 | Earth work in all kinds of soil within 50m, initial lead and 1.5m, initial lift including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge. |
| 3 | Supplying, filling in foundation and plinth with sand including watering and ramming with cost, conveyance, royaltiesof sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only). |
| 4 | Providing & layingPlain Cement concrete (PCC )of proportion (1:3:6) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and ,es of all materials with all labour, cess and T&P required for the work etc. complete in all respect. |
| 5 | Providing Brick work with Fly ashbricks Foundation & Plinth 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 withdimensional tolerance +/ - 2percent in cement mortar (1:6) ( 1 cement: 6 sand), with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour,conveyance, loading ,and aunloadining, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge. |
| 6 | Providing, lifting, hoisting and laying Reinforced cement concrete of following different RCC structure ofM-200 grade as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed andcleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portlandslag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. |
| 7 | a Foundation |
| 8 | b) Plinth Beam |
| 9 | c) Beam/Colum |
| 10 | d) Slope Roof |
| 11 | Providing DecorativeOrnamental cement plaster like Bamboo/Bullaha/Straw/Plank design as per specification and didection of E.I.C.on structural wall or roof with the plaster is to be made of cement mortar of proportion (1:3) with cement oxide colour or any other approval material including cost,material,conveyance,and labour charges etc. |
| 12 | Providing Granite stone prepolished 20mm thick of areaabove 0.40 Sqm in flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royaltiesof all materials, cost of all labour, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. |
| 13 | Providing, fixing and placing ofTor steel (HYSD) Fe-500 of SAIL/ TATA/RINL/JINDAL/SHYAM STEEL for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, bindingwelding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Chargecomplete |
| 14 | Providing 12 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and ,es of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge. |
| 15 | Finishing wall surface of walls with wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, labour T&P etc. complete the work as per the direction of engineer incharge. |
| 16 | Wall painting two coats with 100% Acrylic emulsion paint ( 1st quality) exterior grade of approved make & shade manufactured by reputed manufacturer like NEROLAC/ ASIAN/ BERGER/DULOX or equivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete. |
| 17 | Providing & laying pre cast M-30 Grade paver block of 60 MM thickover 50mm thick compacted bed of sand hydraulically pressed and mechanically compacted ,preparation of sub base with 100mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge. |
| 18 | Providing & fixing precast ,precured Cement Concrete [1: 1.5 :3 ] kerb stone [450 x300x175mm] with gradedstone aggregates& fixing in position & pattern as shown in drawingin cement mortar [1cement: 6 coarse sand] & pointing in cement mortar [1cement: 2 coarse sand] including necessary excavation& filling side treanches etc. including cost of all materials, labour, tax, lead, T&P etc. complete in all respects as per the direction of Engineer/ Architect-in-charge. |
| 19 | Providing and lying plain cement concrete of proportion (1:2:4) in foundation and floorsusing Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification anddirection of Engineer-in-charge. |
| 20 | Providing Granite stone prepolished 20mm thick of areaabove 0.40 Sqm in flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royaltiesof all materials, cost of all labour, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. |
| 21 | Clearing heavy jungle including uprooting stumps of trees and trees above 1M girth and thick bushes |
| 22 | Dismantling brick or stone masonry in cly under 3m height including stacking the useful materials for reuse and removing the debris within 50m lead. |
| 23 | Supplying , fitting and Fixing of Stainless steelof 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr C/C and stainless steel square pipe bracing of size 32mm x 32mm x 2mm in three rows in staircase as per approved design and specification , buffing, polishing etc. with cost, conveyance, ,es of all materials, labour, T&P, etc. required for the complete in all respects. |
| 24 | Supply of Oyester Palm tree at4 to 5 ft 10 x10 inch poly bag size |
| 25 | Supplying, filling in directed area with sand in 22 cm (9”) thick layers including watering and ramming with cost, conveyance, royalties and taxes of sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only). |
| 26 | Painting to external surface of building with two coats of weather seal coat of approved shade and quality of approved designafter cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge. |
| 27 | Dismantling of Play equipments, transportation & re-installation |
| 28 | Electrical works |
| 29 | Recessed Wiring to light/ Fan/ Exhaust Fan point in 5/8" or 3/4"dia. Good quality PVC pipe with 1.5 sq.mm PVC insulated Cu.wire (2 run) &1.0 sq.mmPVC insulated Cu.wire (1 run) for running earth complete with 1 no .6Amp.1way plate type Modular switch, (Polycarbonate)and G.I box of adequate size including PVC bend, saddle, elbow, etc and other necessary materials & labour complete as per the direction of Engineer-in-Charge. |
| 30 | Group -A |
| 31 | Group -B |
| 32 | Group -C |
| 33 | Recessed Wiring to light/ Fan point in 5/8" or 3/4"dia. Good quality PVC pipe with 1.5 sq.mm PVC insulated Cu.wire (2 run) &1.0 sq.mmPVC insulated Cu.wire (1 run) for running earth complete with 1 no .6Amp. 2 way plate type Modular switch, (Polycarbonate)and G.I box of adequate size including PVC bend, saddle, elbow, etc and other necessary materials & labour complete as per the direction of Engineer-in-Charge. |
| 34 | Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copperconductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch ,phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVCinsulated single core multistrand copper conductor for loop earthing etc. as required. ( Make of wire Finolex /L&T / Anchor / Havels / V Guard/RR ) |
| 35 | Supply and fixing of 6A modular switch & socket outlet complete with 1 no of 240 volt 6 amp 5 pin universal round/flat pin combined shuttered socket outlet & 1 no. of240 volt 6 amp control switch mounted on modular grid plate, all housed in a 3 module recessed zinc chromate passivated flush metalbox including mosaic white cover plate of approved make with all other accessories etc. as required complete as per the direction of Engineer-in-Charge. |
| 36 | Supply and fixing of 6A modular switch & socket outlet complete with 2 no of 240 volt 6 amp 5 pin universal round/flat pin combined shuttered socket outlet & 2 no. of240 volt 6 amp control switch mounted on modular grid plate, all housed in a 3 module recessed zinc chromate passivated flush metalbox including mosaic white cover plate of approved make with all other accessories etc. as required complete as per the direction of Engineer-in-Charge.( Make of Switch & Socket - L&T / Anchor roma / Havells / Legrand ) |
| 37 | Supply and fixing of 16A modular switch & socket outlet complete with 1 no of240 volt 16 amp 5 pin universal round/flat pin combined shuttered socket outlet &240 volt 16 amp control switch mounted on modular grid plate, all housed in a 3 module recessed zinc chromate passivated flush metalbox including mosaic white cover plate of approved make with all other accessories etc.as required. as per the direction of Engineer-in-Charge.( |
| 38 | Supplying and fixing of metal box of 32A D.P modular switch on surface or inrecess with 2 Madular metal box with cover in front including providing and fixing, connection etc as required as per the direction of Engineer-in-Charge. |
| 39 | Supplying and fixing of metal box of 20A modular socket on surface or inrecess with 2 Madular metal box with cover in front including providing and fixing, connection etc as required as per the direction of Engineer-in-Charge. |
| 40 | Supply and fixing of capacitor switching circuit,works at 120 to 280 volts,Heavy duty, Noiseless 100W step type Fan regulator complete with all other necessary materials & labour. |
| 41 | Supply and fixing ofTV antennaSocket outlet completelyproviding 1 no. of TV antenna socket & Top , moulded case metal box & plate of adequate size includingPVC bend, saddle, elbow, etc. & other necessary materials &labour complete as per the direction of Engineer-in-Charge. complete as per the direction of Engineer-in-Charge.( Make of Switch & Socket - L&T / Anchor roma / Havels / Legrand ) |
| 42 | Supply and fixing of Telephone point completelyproviding1 no.of telephone socket & Top, Metal plate made of polycarbonate moulded casemetal box with metal plate of adequate size including PVC bend, saddle, elbow etc and othernecessary materials & labour complete as per the direction of Engineer-in-Charge.complete as per the direction of Engineer-in-Charge. ( Make of Switch & Socket - L&T / Anchor roma / Havels / Legrand ) |
| 43 | Sub-main wiringin20/25/32mm dia. good quality ISI mark PVC Conduit withfollowing sizes PVC insulated un-sheathed Single Core FRLS Cu. conductor wire of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. |
| 44 | (2 x 1.5 + 1 x 1.5) sq.mm copper wire |
| 45 | (2 x 2.5 + 1 x 1.5) sq.mm copper wire |
| 46 | (2 x 4 + 1 x 2.5) sq.mm copper wire |
| 47 | (2 x 6 + 1 x 2.5) sq.mm copper wire |
| 48 | (4 x 4 + 1 x 2.5 ) sq.mm copper wire |
| 49 | (4 x 6 + 1 x 2.5 ) sq.mm copper wire |
| 50 | (4 x 10 + 1 x 4 ) sq.mm copper wire |
| 51 | 0.5mm 2 pair telephone wire |
| 52 | RJ-6 Coaxial TV wire |
| 53 | Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe with charcole / coke and salt etc. as required as per the direction of Engineer-in-Charge. |
| 54 | Supplying and laying 10 Sq mm copper conductor ISI marked at 0.5 meter below grond level as strip earth electrode including soldering etc. as required as per the direction of Engineer-in-Charge. |
| 55 | Supply & fixing of 12 way Single pole and Neutral sheet steel MCB double door distribution box complete with tinned copper busbar, neutral link, earth bar, din rail, detachable gland plate includingcommissioning including all other materials etc. as required as per the direction of Engineer-in-Charg. |
| 56 | Supply & fixing of 4 way Triple pole and Neutral sheet steel MCB double door distribution box complete with tinned copper busbar, neutral link, earth bar, din rail, detachable gland plate includingcommissioning including all other materials etc. as required as per the direction of Engineer-in-Charg. |
| 57 | Supply & fixing of 4 way Triple pole and Neutral vertical double door load line distribution board complete with tinned copper busbar, neutral link, earth bar, din rail, detachable gland plate includingcommissioning including all other materials etc. as required. |
| 58 | Supply and fixing of 5 amp to 32 amp rating 240 V "B" series single pole miniature circuit breaker suitable for lighting and other loadsin the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required. |
| 59 | Supply and fixing of 40 amp DP miniature circuit breaker suitable for inductive loads in the existing MCB DB of approved make with all other accessories etc as required complete as per the direction of Engineer-in-Charge. |
| 60 | Supply and fixing of 40 amp DP RCCB of approved make with all other accessories etc as required complete as per the direction of Engineer-in-Charge. |
| 61 | Supply and fixing of 63 amp TPN miniature circuit breaker suitable for inductive loads in the existing MCB DB of approved make with all other accessories etc as required complete as per the direction of Engineer-in-Charge. |
| 62 | Supply and fixing of 63 amp TP miniature circuit breaker suitable for inductive loads in the existing MCB DB of approved make with all other accessories etc as required complete as per the direction of Engineer-in-Charge. |
| 63 | Supply and fixing of 63/100 Amp 4 pole MCCB of approved make with all other accessories etc as required complete as per the direction of Engineer-in-Charge. |
| 64 | Supply and fixing of 63 Amp 4 pole RCCB of approved make with all other accessories etc as required complete as per the direction of Engineer-in-Charge. |
| 65 | Supply, Installation, Testing, and commissioning of decorative ceiling fan 900/1200 mm sweep 230/250 volts, 50HZ complete with suitable, clamp, downrod (as per site requirement), blades, canpoy,rubber, shackle, and connections with 1.5 sq.mm PVC insulated copper conductor cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 66 | Supply, Installation, Testing, and commissioning of ventilating Plastic Body Exhaust fan 150 mm dia suitable to work on 230/250 volts, 50HZ complete with mounting frame and louvers including making the hole to suit the size of above fan, making good the damage, connections, with 1.5 sq.mm PVC insulated, copper conductor, single core cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 67 | Supply, Installation, Testing, and commissioning of ventilating metal Body Exhaust fan 150 mm dia suitable to work on 230/250 volts, 50HZ complete with mounting frame and louvers including making the hole to suit the size of above fan, making good the damage, connections, with 1.5 sq.mm PVC insulated, copper conductor, single core cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 68 | Supply, Installation,Testing & commissioning ofSurface mounting 18 W LED tube light fitting includingluminairs of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 69 | Supply, Installation,Testing & commissioning ofSurface mounting 9 W LED tube light fitting includingluminairs of approved make complete with all materials & labour. |
| 70 | Supply, Installation,Testing & commissioning ofSurface mounted Celing 9 watt LED luminariessuitablefor indoor applications of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 71 | Supply, Installation,Testing & commissioning ofSurface mounted Celing 18 watt LED luminariessuitablefor indoor applications of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 72 | Supply, Installation,Testing & commissioning ofRecessed mounted 3 watt LED spot luminaries suitable for indoor applications of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 73 | Supply, Installation,Testing & commissioning ofRecessed mountedCeling 9 watt LED luminaries suitablefor indoor applications of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 74 | Supply, Installation,Testing & commissioning ofRecessed mountedCeling 12 watt LED luminaries suitablefor indoor applications of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 75 | Supply, Installation,Testing & commissioning ofFlexibleLEDstripwide viewing angle for good light distribution & IP 65 protection, linkable and easy to install, complete with separate replaceable electronic driver approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 76 | Supply, Installation,Testing & commissioning of surface mounted IP 65 LED Bulk head luminaries of 10 W Capacity of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 77 | Supply, Installation,Testing & commissioning of SPARKLER WL 1LS E27 BRS BL PC Minimalistic design of wall lights without shade in different finish and design in E27 base. Recommended to use with energy saving LED Filament lamp 7.5 Watt of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Havells LHFHANDBTN1K007/ Jaquar/Klite/Philips) |
| 78 | Supplying, storing, laying, testing and commissioning of 2c x 6 Sq. mm A2XFY Al armoured Cable1100 Voltsetc. as required of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 79 | Supplying, storing, laying, testing and commissioning of 4 c x 10 Sq. mm A2XFY Al armoured Cable1100 Voltsetc. as required of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 80 | Supplying, storing, laying, testing and commissioning of 3.5 c x 35 Sq. mm A2XFY Al armoured Cable1100 Voltsetc. as required of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 81 | Supplying, storing, laying, testing and commissioning of 3c x 2.5 Sq. mm A2XFY flexible copper conductor etc as required of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 82 | Supplying, storing, laying, testing and commissioning of 4c x 4 Sq. mm copper Armourd cable etc as required of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 83 | Supply, installation, testing & commissioning of 3050 mm long decorative lighting pole with mild steel body step pole with grey/black powder coting fnish. The control gear tray made up off diecast alluminium body & prewired with 2.5 sqmm copper cable, 6 Amp SP MCB, 32 Amp 4 pole connector, 5 Amp 3 way terminal connector & earthing point. The Pole shall have base Plate of size (200x12) mm with provision for founation bolt fittings.Compatible for all suitable size for cable entry & exist as required of approved make with all materials & labour as per the direction of Engineer-in-Charge.(Make: K- Lite Flat Series KP-4786/ Havells / BAJAJ/CG/Jaquar). |
| 84 | Supply, installation, testing & commissioning of coil earthing etc as required as per the direction of Engineer-in-Charge. |
| 85 | Supply, installation, testing & commissioning of 30 watt LED post top light fittings integrated with LED Modules, Clear Polycarbonate optical cover, Protection class IP 65, Integral power supply, Earth connection, BIS Mark as required of approved make etc complete with all materials & labour as per the direction of Engineer-in-Charge. (Make: K -lite Avira KL- 4976/ Havells / BAJAJ/CG/Jaquar). |
| 86 | Supplying, installation, testing and commissioning of 9W LED Bollard Luminaire body made of extruded aluminium alloy with die castaluminium components and non corrosive SS fasteners. Luminaire height 800 mm supplied with 2/3 core cable length and a IP67 connector.etc complete with connection as required for the work and as per direction of Engineer-in-Charge.(Make: K- Lite KL - 6951/Havells/ BAJAJ/ CG/Jaquar). |
| 87 | Supplying, installation and commissioning of 35W LED post top light luminaries having Versatile pressure die-cast aluminium IP66 with high power LED as light source to be fixed on the ends of pole etc complete with connection as required for the work and as per direction of Engineer-in-Charge.(Make: Havells Ruby /K- Lite/ BAJAJ/ CG/Jaquar). |
| 88 | Supply, installation, testing & commissioning of Hot dipGalvanized 8 mtr long Octagonal poles with base plate fabricated from special steel plates as per BSEN 10025/IS 5986 single section Top Dia: 70mm, Bottom Dia:130 mm, Sheet Thickness:3, base plate size :200*200*16mm with foundation base plate of size 250 mm x 250mm x 16mm thick Hot Dip Galvanization of both internal and external surface with minimum thickness of 86 Microns more that 600 gm/ sqm as per IS: 4759 specification. 1mtrlong(Galvanized ) single arm bracket made out of 60 mm outer diameter Hot dip tubular pipesand welded to fit the top of the above pole and Plate for rigidity between cap and pipe with provision of passing the electrical cable from the pole to the end of the arm for connection of the luminaries, with provison of Electrical Termination junction in side the pole at a height of 1mtr(maximum) from the bottom of pole, with clamps, 4way 100Amps / 400Volts connector, 6/10 Amps / 230 Volts / 10KA SP MCB, Cable gland at bottom of suitable size for cable entry & exist. |
| 89 | Supply, installation, testing & commissioning ofIP 65 LED street Light of 90 W Capacity 6000K Colour temperature with pressure die-cast Aluminium body havingin built electronic driver which have 50000 burning hour road way luminaries of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 90 | Supply, installation, testing & commissioning ofIP 65 LED flood Light of 200 W Capacity 6000K Colour temperature with pressure die-cast Aluminium body havingin built electronic driver which have 50000 burning hour road way luminaries of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 91 | Supply, installation, testing & commissioning of LED spike light Environmental friendly, compact, light weight, energy saving, IP66 LED spike light.Multi purpose application like column lighting, tree up-lighting, statue accentuation etc. can be addressed with ease.of approved make etc complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make:Havells Eros/ K Lite/ BAJAJ/CG/Jaquar). |
| 92 | Supply, installation, testing & commissioning of Out door type Main pannel board2mm thick C.R. sheet individual box GI angle frame febricated welded hinges, powder coated body & danger board. Incoming 400 Amp 36 KA 4 pole MCCB 1 no, 500A TPN copper bus bar-1 Set,indicator lamp, struggle switch & fuses -3 Nos. Digital voltage current meter -1 No., 100/5A CT coil-3 Nos O/G - 200 Amp 36 KA 4 pole MCCB 2 No, 160 Amp 36 KA 4 pole MCCB 1 No, 100 Amp 25 KA MCCB3 nos & wire for wiring of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. |
| 93 | Supply, installation, testing & commissioning of Out door type Feeder pannel board2mm thick C.R. sheet individual box GI angle frame febricated welded hinges, powder coated body & danger board. Incoming 160 Amp 36 KA 4 pole MCCB 1 no, 200A TPN copper bus bar-1 Set, indicator lamp, struggle switch & fuses -3 Nos. O/G - 63 Amp4 pole RCCB 4 No, 40 Amp Double pole RCCB 4 No & wire for wiring of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. |
| 94 | Supply, installation, testing & commissioning of Out door type Feeder pannel board2mm thick C.R. sheet individual box GI angle frame febricated welded hinges, powder coated body & danger board. Incoming 100 Amp 25 KA 4 pole MCCB 1 no, 160A TPN copper bus bar-1 Set,indicator lamp, struggle switch & fuses -3 Nos. O/G - 63 Amp4 pole RCCB 2 No, 40 Amp Double pole RCCB 2 No & wire for wiring of approved make etc complete with all materials, labour &transportation as required as per the direction of Engineer-in-Charge. |
| 95 | R.C.C. work ofM-20having minimum compressive strength of 200kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth including centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance & royaltiesof all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge. |
| 96 | Signage |
| 97 | Fabrication, supply and fixing of informatory retro reflective signboards using super high efficiency, TYPE XI sheeting as per IRF 67-2012 Code with white color bonded on to 4mm Aluminium Composite panel (0.25+3.50+0.25 -PVCF coated) cover which alphabets and unberals are reverse cut made using Electro cut able film with comuterized cuttng plotter. the board shall be provided with frame mode out of stainless steel pipes of 304 grade. it shall be maunted on vertical posts made out of 80mm NB Stainless pipe including necessary excavation for M-20 foundations concreting/reveling, etc necessary for fixing fo the board and conveyance of all materials, equipment, machinery and labour with all leads and lifts, loading and unloading charges all taxes etc complete in all respect as per specification & direction of Engineer-in-Charge. |
| 98 | a) Required retro reflective boards of white, yellow, green, blue , brwon colour with necessary signage as per specification & direction of Enginner-in-charge |
| 99 | Required stainless steel frame of 80mm NB made out of 304 grade steel pipe including cost, all taxes , transportation complete as per specification & direction of Engineer-in-Charge. 35Kg per Signage |
| 100 | Providing and laying plain cement concrete of proportion (1:.2:4) in foundation and floors using Portland slag cement (PSC) with 12mm size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleared including hoisting, lowering, laying corncrete, ramming, watering and curing etc complete to required levels laid in layers not cxceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalities an dtaxed all materials and cost of all labours, sundries T&P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specifiation and direction of Engineer-in-Chrge. (0.45x0.45x0.63 = 0.1275) x2= 0.255 Cum Per Nos |
| 101 | Pre fab equipments |
| 102 | Earthwork in excavation in all kinds of soil upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in following types of soil including moorum, hard stony earth, earth mixed with boulders, DI rocks etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. |
| 103 | Supplying and filling in foundation trenches and plinth, ditches with sand well-watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only). |
| 104 | Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floorsusing Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification anddirection of Engineer-in-charge. |
| 105 | Providing, lifting, hoisting and laying Reinforced cement concrete of following different RCC structure ofM-200 grade as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed andcleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portlandslag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. |
| 106 | A)Column Base/Foundation |
| 107 | B)Plinth Beam |
| 108 | Providing and lying plain cement concrete of proportion (1:2:4) in foundation and floorsusing Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification anddirection of Engineer-in-charge. |
| 109 | Providing 12 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:4) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and ,es of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge. |
| 110 | Providing Brick work with Fly ashbricks Foundation & Plinth 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 withdimensional tolerance +/ - 2percent in cement mortar (1:6) ( 1 cement: 6 sand), with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour,conveyance, loading ,and aunloadining, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge. |
| 111 | Providing, fixing and placing ofTor steel (HYSD) Fe-500 of SAIL/ TATA/RINL/JINDAL/SHYAM STEEL for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, bindingwelding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Chargecomplete |
| 112 | Providing Granite stone prepolished 20mm thick of areaabove 0.40 Sqm in flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royaltiesof all materials, cost of all labour, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. |
| 113 | Providing edge moulding to 18 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloadingof all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. |
| 114 | GAZEBO[Specifications -Supply of hexagonal Gazebo is made of marine grade composite(marine grade corrosion resistant & Hydrocarbon solvent |
| 115 | Bore well |
| 116 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only |
| 117 | a) Drilling of 200mm dia bore |
| 118 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. |
| 119 | a) Lowering of 200mm dia GI/P.V.C/MS casing pipes |
| 120 | b) Cost of 150mm dia P.V.C schedule-80 pipe |
| 121 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge |
| 122 | Supplying all materials and labour,tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level(as per drawing)to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock the bottom to ensure sanitary sealing(excluding cost of cement which willbe supplied by the Department). |
| 123 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.40mm dia brass or gun metal Non-return valve |
| 124 | Supplying 1.5 HP(1.10KW Model No-CORA 50(HH)/25 PLUS ELX PLUS(S) submerssible pump etc. |
| 125 | DOL controll pannel |
| 126 | 4.00sqmm cable |
| 127 | 32mm dia steel short piece |
| 128 | Steel rope with cover |
| 129 | Well cap |
| 130 | 50mm size CI bracket |
| 131 | 25 mm C-PVCpipes |
| 132 | 50 mm C-PVCpipes |
| 133 | Labour charges for lowering of subersible pumpset with pipes and cables etc.with testing and commissioning at site. |
| 134 | Supplying, fitting & fixing of Pressure Pump etc. completed.Model no.- MULTIBOOST(KHM0803 2.0 HP, 24LTR) |
| 135 | Over head tank and water supply system and Repairing of STP |
| 136 | Supplying all materials, labour, T&P and fittings and fixing of 2000 ltr Poly Propelene white tripple layer water storage Tank of approved make confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto terrace level and placing the tank to the required position etc all complete as per PH specification and direction of Engineer-in-charge. (To provided with brick masonary guard walls which will be paid separately) |
| 137 | Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipeconfirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. |
| 138 | a) 32 mm dia |
| 139 | b) 40 mm dia |
| 140 | c) 50 mm dia |
| 141 | Supplying all materials, labour, T&P, fitting & fixing of different size brass / GM Full way Valve of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance & taxes of all materials, T&P etc. all complete as per P.H. specification and as per the direction of the Engineer-in-charge. |
| 142 | a) 40mm dia |
| 143 | b) 50mm dia |
| 144 | Supplying all materials,labours,T&P and cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI /CPVC /PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. |
| 145 | Supply all materials, labour,T&P for fitting and fixing of 10 litres capacity cistern (Single flush)of HINDWARE Sleek fresh orequivalent type of approved make complete with all parts and internal fittings of approved make with ISI mark and supplying of necessary brackets, screws etc 32mm dia flush bend, 15mm dia 450mm long PVC water connecting pipeof Jaquar make having cat no ALD 803AB with CP or brass union nuts at each end as per PH specification all complete as per direction of Engineer-in-charge. |
| 146 | Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock with wall flengeJaquar Cat. No.-FUS2953 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 147 | Supplying all materials, labour, T&P and fixing health faucet of Jaquar Cat. No.- ALD 573 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 148 | Supplying all materials, labour, T&P and fixing standard two Way Bib cockwith wall flange, Make JaquarCat No. FUS-29041or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 149 | Supplying & Fixing long bodyBib cockofCP brass of Jaquar continetnal cat no- CON-107/ eqv of crabtree / lauretincluding making good the damages including tools, plant, all material,labour , scaffolding etc. complete. |
| 150 | Supplying all materials, labour, T&P and fixing standard sized concealed stop cockof Jaquar Cat. No.-ALD-089 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 151 | Supplying all materials, labour, T&P and fixing standard sizedStainless Steeltowel rail 450mm long complete with Chromium Plated brassbrackets fixed to wooden plugs with Chromium Plated brassscrews as per specification and direction of the Engineer in charge(Jaquar ACN-1111BSM) |
| 152 | Supplying all materials, labour, T&P and fixing standard sized pillar cock of Jaquar Cat. No.-FUS-29001 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 153 | Fixing 600x450mm bevelled edge mirror of superior glass mounted on6mm thick A.C sheet or plywood sheet and fixed to woodenplugs with Chromium Plated brass screws and washers complete as per specification and direction of the Engineer in charge |
| 154 | Supplying all materials, labour, T&P and fixing standard sizedCP Soap dish holder of Jaquar Cat. No.-CAN-1131N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 155 | Supplying all materials, labour, T&P and fixing standard Over head Shower of Jaquar Cat. No.- OHS1989or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 156 | Providing and fixingcircular type stainless steeljalli (grating) with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge |
| 157 | Supply and fitting Godrej Lock with Handle : matiz-7359 Antique Brass finish etc. completed. |
| 158 | Supply and fitting Door stooper etc. completed. |
| 159 | Supply and fitting Tower Bolt(200mm x 10mm)etc. completed. |
| 160 | Supply and fitting Door closer heavy duty(UL RATED, 68Kg) etc. completed. |
| 161 | Reparing of STP(10/20/30)KLD. |
| 162 | Bar Scren(Course Bar Screen,MOC:mild steel with Epoxy Paint Type;10-15mmGrid Blocks. |
| 163 | Cleaning of Equalization Tank(Cleaning of equalization tank through cesspool vehicle through vaccume cub. |
| 164 | Cleaning of Filter Feed Tank(Dewatering and cleaning of Filter Feed Tank) |
| 165 | STP System Revamping Work -i) Cleaning of STP Unit(cleaning of aeration tank,sedimentation tank ) for 1 LOT ii) Required Fabrication & FRP docting/coating(STP unit maintainence work,fabrication work & FRP docting/coating) 1 LOT iii) Internal & external muffing & painting(STP unit internal & external muffing and painting work) 1 LOT iv) Bacteria formation & MBBR media change(EMO culteration and biological treatment policies) 1 LOTv) Installation of New Filteration unit[MGF&ACF unit each set of filter combined with:size of filter:14"x65"-1no:MOC:FRP Vessels 40NB multiport valve-1no.100NB steinner-2no.Filter media- 1 Llot(sand,pebbles,gravels&activated carbon)] 2 Set |
| 166 | Dismentaling and assembling of new pipe line(Dismantaling & assembling of new pipe line of STP unit,MOC:MSFRP coated/UPVC) |
| 167 | Installation of Hypo Dosing System(Hypo Dosing system 40 ltr.Dosing Tank -1no.0-6 LPH Dosing Pump-1no) |
| 168 | Replacement of External Pipes(Replacement of external pipes MOC:UPVC) |
| 169 | Blower Servicing:a) v-belt change b) paper filter change c) Gear oil change d) Complete Greeasing e) Bearing change. |
| 170 | Motor & Pump Servicin:a) Water/Mechanical seal changeb) Bearing change for Motor& Pump c) Revarnishing of Motors and Temp.Tr |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
