|
| 1 | Repairs to pot holes any depth, not exc 1 Sqm each incl sweeping free from dust and mud or water scoring sunkan surfaces in roads paths etc cutting around edges to at least 25mm in depth making good by applying tack coat at 5kg per 10 Sqm putting in premixed bitumeminuous macadam, well rammed and sealed with binder 9.8 kg per 10 Sqm blinded with 0.09 cum of stone chipping 6.3mm size and again well rammed (incl supply of premixed macadam binder and chippings) depth of pot holes exc 30mmcomplete all as specified and directed |
| 2 | M&L Preparingunsurfaced water bound macadam by brush with wire brush for removing caked, mud, etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, complete all as specified and directed. |
| 3 | M&L for 75 mm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mmsize) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required. |
| 4 | M&L Applying paving bitumen evenly a priming/tack coat with bituminous primer VG-10at the rate of10 kg per 10 sq metre of road surface complete all as specified and directed. |
| 5 | M&L Bituminous premixasphaltic concrete semi dense carpet40 mm compacted thickness with 5.5% binder content VG-30by weight of total mix, rolled and compacted to required camber and gradient complete all as specified and directed. |
| 6 | Material and labour for bituminous macadam laid , rolled and compacted to required gradient and camber (consolidated thickness not exc 75mm) with paving bitumen @ 4% by weight of total mix complete all as specified and directed by Engr-In-Charge. |
| 7 | M&L PreparingBlack top surfaces by brush with wire brush for removing caked, mud, etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, complete all as specified and directed. |
| 8 | M&L Bituminous premixasphaltic concrete semi dense carpet30 mm compacted thickness with 5.5% binder content VG-30by weight of total mix, rolled and compacted to required camber and gradient complete all as specified and directed. |
| 9 | M&L Applying paving bitumen evenly a priming/tack coat with bituminous primer VG-10at the rate of5 kg per 10 sq metre of road surface complete all as specified and directed. |
| 10 | M&L Continuous brick edging; with width equal to the width of the brick of whole sub class \"B\" bricks laid dry on end vertically to sides of roads, including necessary excavation embedding bricks in the ground to depth as required tempering around bricks and removing surplus spoil to a distance not exc. 50 m etc complete all as specified and directed. |
| 11 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified. |
