Military Engineer Services-MES has published Tender For Provision Of Bath Room And Toilet Near Bldg No T-83(Ii) And Construction Of Footpath (150 Mtr) In Office Area At Tezu Under Ge Lekhapani. Submission Date for this Tender is 22-04-2024. Footpath Work Tenders in lekhapani Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 01-Apr-2024 | CORRIGENDUM8781 | BOQ | 09-04-2024 |
| 2 | 09-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-04-2024 |
| 3 | 16-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-04-2024 |
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation getting out soft loose soil for laying of cable / taking out of pipe / laying of pipes complete all as specified and directed |
| 2 | Material & Labour for plain cement concrete (1:4:8), type D-2, (using 40mm graded stoneaggregates)in foundations, filling, mass concrete etccomplete all as specified and directed. |
| 3 | Material and labour forRCC 1:2:4 type B1 nominalmix (using 20mm graded aggregate) as in beam / lintel and similar RCC works complete all as specified and directed. |
| 4 | Material and labour forRCC Type B1 (nominal Mix) using 20 mm graded aggregate in slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed. |
| 5 | Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels. Cantilevers, shelves including supports, overhangs, etc also splays between floor and beam etc for rough finished flat surfaces of cocrete complete all as specified and as directed. |
| 6 | Material and labourfor formwork to soffits of suspended slabs such as roof slabs, landings and similar work not exc 200mm thick (Horixontal or sloping) for rough finished flat surfaces of concrete complete all as specified and as directed. |
| 7 | M&L forTMTbars 10mm dia and over, cut to length, bent to shaperequired, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia orsecuring with clips complete all as directed. |
| 8 | All as per Item No 7.00 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as directed. |
| 9 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 10 | M&L Brickwork with subclass ‘B’ bricks, straight for curved on plan to any radius as in half brick thick walls built in CM 1:4 complete all as specified and as directed. |
| 11 | M&L for rendering 15mm thick in CM 1:4 and finished fair and evencomplete all as specified and as directed . |
| 12 | M&L for Prepration of newly plastered surface of wall and applying two coat of cement base paintcomplete all as specified and as directed. |
| 13 | M&L for rendering 10.mm thick plaster in cm 1:6 on fair faces of brick work or concrete surfacesincluding finishing top even and smooth without using extra cement complete all as specified & directed. |
| 14 | M&L for preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified & directed. |
| 15 | M&L for glazed coloured ceramic tiles of size450 x 300 x 7mmthick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles as in vertical surface laid over & including 10 mm thick rendering as in backing wall plaster in cement mortar (1:4) complete all as specified & directed. |
| 16 | Material & Labour for 75 mm thick Plain cement concrete ( 1:4:8 ), type D-2 (using 40 mm gradedstone aggregate), as insub base of floor complete all as specified and as directed. |
| 17 | M&L for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile not exceeding 0.11 Sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over andincluding 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified & directed. |
| 18 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment tomatch with shade of granite all as specified and directed. |
| 19 | S&Fsteel ventilators (Factory made) fixed type complete with glazing bars dovtailed or welded complete all as specified and as directed. |
| 20 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plainflushdoor shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisturproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 21 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ S & F Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 22 | S&F4mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5sq. m in each panecomplete all as specified and as directed |
| 23 | S&F Galvanised steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed withsteel wire staplescomplete all as specified & directed. |
| 24 | S&F 150 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed completeall as specified and as directed. |
| 25 | S&F 100mm butt hinges, type B-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised & fixed to PVC door complete all as specified & as directed. |
| 26 | S&F 150mm size aluminium handles, cast type, anodized and fixed complete all as specified & as directed. |
| 27 | Supply & Fixing mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240 complete all as specified and directed. |
| 28 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework ofwater tanks and similar work conforming to Fe.290.Gde-E-165. |
| 29 | S&F, Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheets, 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws as specified and directed. |
| 30 | S&F, Pre-painted galvalume aluminum zinc coating GI based Plain steel sheets, 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, etc. fixed with self tapping screws complete all as specified & directed. |
| 31 | Material & Labour for 75 mm thick Plain cement concrete ( 1:3:6 ), type C-1 (using 20 mm gradedstone aggregate), as inplinth protection complete all as specified and as directed. |
| 32 | S&F 15mm dia bore of pipes, medium grade, galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed. |
| 33 | S&F 20mm dia bore of pipes, medium grade, galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed. |
| 34 | S&Fin repair Single piece vitreous China suite european water closet and cistern, white colour, with UF seat cover withfittings complete all as specified and as directed MakeParryware Cat Part No C8906 (S-300) or equivalent model of Hindware / Cera / Jaquar / RAK as approved by GE. |
| 35 | S&F hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish and Wall Hook with N.R.V (Back Flow Preventer) with clamp complete all as specified and as directed. |
| 36 | S&F Wash basins white, vitreous China, Ovel type, size 580x450mm,excluding taps, waste, chain and plug and porcelain stopper but including bracketsfixed to wall complete all as specified & directed. |
| 37 | S&F 15mm bore chrome finish single lever range Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed |
| 38 | S&F32mm waste coupling of PTMT (half or full threaded) (minimum weight 40mm-60 gms) fixedin repair complete all as specified and as directed. |
| 39 | S&F 15mm bore dia stop valves / angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed. |
| 40 | S&F fancy type15mm dia Bib taps cast copper alloy,long body chromium plated screwed down to iron pipe or for brass ferrule & fixed complete all as specified & directed. |
| 41 | S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified & directed. |
| 42 | S&F Looking mirror of 4 mm thick selected quality glass,fixed to wooden plugs with chromium plated projected type brackets and cup washerscomplete all as specified and directed. |
| 43 | S&F Tubular towel rail, brass CP20mm dia, D type, 60cm long between flanges all as specified |
| 44 | S&F Toilet paper holder of of brass, chromium plated or stainless steel fixed to walls with chromium plated (CP) brass screws all as specifeid |
| 45 | S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixedcomplete all as specified & directed. |
| 46 | S&F rotational moulded polyethylene water storage tanks of 1000 ltr capacity,(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I & as directed. |
| 47 | S&F 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe & fixed (Minimum weight 210 gms) complete all as specified & as directed. |
| 48 | M&L 75mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement in repair complete all as specified and directed. |
| 49 | M&L Preparation of newsteeland iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paintover a coat of red oxide primer complete all as specified & as directed. |
| 50 | S&F PVC (SWR) pipes 110mm diasingle socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 51 | S&F PVC (SWR) pipes 75mm diasingle socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed. |
| 52 | S&F PVC (SWR) pipes 75mm diasingle socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 53 | S&F PVC (SWR) bends 110mm dia any radius as in repair all as specified and directed. |
| 54 | S&F PVC (SWR) bends 75mm dia any radius as in repair all as specified and directed. |
| 55 | Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm of soft loose soil. |
| 56 | Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 57 | Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605mm x 605mm in true horizonatal level, hot dipped galvanised steel sections consisting of main “T” runner with suitably spaced joints to get required length and size 24mm x 38mm made from 0.30mm thick (Min) sheet spaced at 1200mm centre to centre and cross “T” of size 24mm x 28mm made of 0.30mm thick (Min) sheet, 1200mm long spaced between main “T” at 600mm centre to centre to form a grid of 1200mm x 600mm and secondary cross “T” of length 600mm and size 24mm x 28mm made of 0.30mm thick (Min) sheet to be interlocked at middle of the 1200mm x 600mm panel to form grids of 600mm x 600mm and wall angle of size 24mm x 24mm x 0.4mm. Main “T” runner to be suspended from purlins or truss member using 2 to 3 mm dia GI wire, 1200mm x 600mm centre to centre all complete for all heights as per specifications and as directed by Engineer – in - Charge. |
| 58 | M & L for 4 mm thick high pressure, oceanic pre-primed, self embossed, non asbestos fibre cement decorative board, water, termite and fire resistant for insulation ad acoustic purpose to be placed in grid system hold down clips with provision of high fixtures, air conditioning, diffuser and ducts, sprinkler, smoke detector etc, complete all as per manufacturer instructions |
| 59 | Excavating in trenches, n exc 1.5 m wide andexc 1.5 m and n.exc 3 mtr in depth for foundation etc or for shafts , wells , cesspits , manholes ,etc n.exc 10 sqm on plan andgetting out soft loose soil complete all as specified and directed |
| 60 | Surface Excavation not exceeding 30cm deepand averaging 15cm deep and getting out in soft / loose soil for roads to required slope gradient, chamber etc complete all as directed |
| 61 | Material & Labour forPCC 1:3:6 type C2 using 40mm graded aggregate as in foundation, filling, sub base etccomplete all as specified and as directed. |
| 62 | M & L for Chequred cement corcrete tile 25cm x 25xm x 22 mm thick with grey cement and pigments, set, jointed and pointed in grey cement slurry and pigments as in floor laid over and incl 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed. |
| 63 | M&L for Providing, cement concrete 1:2:4 type B1 using 20mm graded aggregatein roof kerbs or mud stops, rounded or chamfered on edgescomplete all as specified and directed. |
| 64 | M&L Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:6. |
| 65 | M&L RCC type B-1, 1:1 1/2:3 B-1 (20mm graded aggregate) as in as cover slab for manholes, septic tank, soak well etc set in cement mortar 1:4 with plain fair faces incl chamfered, weathering, throating etc incl necessary use & waste of form workcomplete all as specified and directed |
| 66 | M&L for loose filling with broken brick aggregates of gauge 80 to 150mm in soakage pit, soak well etccomplete all as specified and directed |
| 67 | S&F PVC (SWR) pipes 110mm diasingle socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 68 | S&F PVC (SWR) bends 110mm dia any radius as in repair all as specified and directed. |
| 69 | Surface excavation n.exc30cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 70 | Material & Labour forPCC 1:3:6 type C2 using 40mm graded aggregate as in foundation, filling, sub base etccomplete all as specified and as directed. |
| 71 | M&L Chequered cement concrete tiles of size 25cm x 25cm x 22mm thick, cast in rubber moulded glossy finished with mixture of white and gray cement in equal proportions and pigments set and jointed and pointed in neat cement slurry in floors incl layers over 15 mm thick bedding of CM (1:6) complete all as specified and as directed |
| 72 | M&L for Providing, cement concrete 1:2:4 type B1 using 20mm graded aggregatein roof kerbs or mud stops, rounded or chamfered on edgescomplete all as specified and directed. |
| 73 | Material and labour for point wiring (concealed type) with PVC insulatedFRLSH cable 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate sizewith fittings and accessoriesas required at site including suitable size of modular GI boxes of thickness not less than 0.8 mm thick with suitable size of modular inner and outer cover combine plate and accessories complete for fixing of modular switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way modular switch complete all as specified as directed. |
| 74 | Supply and fix modular switch 1 way, 6 A, 1 module all as specified and as directed. |
| 75 | Supply & fix ceiling rose, 3 terminals, surface bakelite / PVC / Polycarbonate, isolated body to be fixed on wall/ceiling complete all as specified and directed. |
| 76 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete withall accessories and fixing the light fitting to walls / roof complete all as specified & directed |
| 77 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete withall accessories and fixing the light fitting to walls / roof complete all as specified & directed |
| 78 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection completeall as specified & directed. |
| 79 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm ,and fixing the fitting to walls complete all as specified & directed |
| 80 | S&F single pole and neutral DB wall mounting type,240 Volts,4 Way with 200 Amps rated bus bar,double door suitable for fixing MCB"s including connecting etc complete all as specified and directed. |
| 81 | Supply andfix MCB single pole & neutral32 amps, 240 volts, 10 KA, "C" series with all incoming / outgoing connections with proper size of aluminium lugs completeall as specified as directed |
| 82 | Supply andfix MCB single pole6 to 32 amps, 240 volts, 10 KA, "C" series with all incoming / outgoing connections with proper size of lugs completeall as specified as directed. |
| 83 | Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire meshincluding necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways completeall as specified & directed by Engineer-in-Charge. |
| 84 | Material and labour for sand cushioning with a layer of sand 8cm thick before laying of cable and 10 cm thick after laying of cable in trenches complete all as specified. |
| 85 | Material and labour for brick protection using old size sub class ‘B’new bricks, laid flat dry but jointed, laid length wiseperpendicular to theaxis of cable all as specified and directed. |
| 86 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core complete all as directed. |
| 87 | Supply and laying 40 mm bore GI tubing light grade laid in trenches/wallfor cable protection. |
| 88 | Cutting existing steel tubing for alteration or addition (each cut measured ) bore of pipe 40 mm / 50 mm /80mm |
| 89 | Screwing existing steel tubign for alterations or additions (or lengthening screw on pipe to form connector) |
| 90 | S&F steel water tubing galvanised " medium grade"of size 25mm bore with all fittings and accessories complete in trenches/ on wall/under road complete all as specified and directed. |
| 91 | S&F steel water tubing galvanised " medium grade"of size 40mm bore with all fittings and accessories complete in trenches/ on wall/under road complete all as specified and directed. |
| 92 | S&F gate, globe valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe and fixed bore of size 25 mm |
| 93 | S&F gate, globe valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe and fixed bore of size 40 mm |
| 94 | M & L brick masonry with brick valve chamber of internal size 90 cm x 90 cm x 90 cmwith 23 cm thick wall in CM 1:6 including excavation, earth work in any strata & PCC 1:4:8 foundation type D-2, 75 mm thick including 20 mm thick PCC 1:2:4 type B1 in & plastering the internal surface with 10 mm thick cement mortar 1:4 providing 3.15 mm MS sheet chamber cover double opening arrangement center lock system with40x40x6mm angle iron frame duly painted with two coat of black bituminous paint over one coat of red oxide primer complete all as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
