Military Engineer Services-MES has published Tender For Additional/Alternator With Re-Appropriation To Bldg No P-04 (Sajjan Line) As Holiday Home For Jcos/ Ors At Udaipur Mil Stn. Submission Date for this Tender is 08-04-2024. Mobile Generator Tenders in udaipur Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 01-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-04-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level andremovingmaterial from site complete all as specified and directed. |
| 2 | Taking down chowkats or frames areanot exceeding 1.50 Sqm(w/o taking off shutters from frames) and removing from site, complete all as specified and as directed. |
| 3 | Taking down chowkats or frames area exceeding 1.50 Sqm andnot exceeding 4.00 Sqm (w/o taking off shutters from frames) and removing from site, complete all as specified and as directed. |
| 4 | Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each, from chowkhat complete all as specified. |
| 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 6 | Material & Labour for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed incement mortar 1:6 complete all as specified and directed. |
| 7 | Material & Labour for Double Charged Vitrified Ceramic tiles 600x600mmx10 mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to, in floors etc. set and jointed in neat cement slurry and inted in white or coloured cement to match over and including 15mm thick screed bed incement mortar 1:6 complete all as specified and directed. |
| 8 | All as per above but in skirting to walls including 10mm thick cement plaster in ement mortar 1:4 as backing coat on fair faces on stone surface all as specified and directed. |
| 9 | Material & Labour 40mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregate) as in flooring finished even and rough all as specified and directed. |
| 10 | Material & Labour for Coloured Glazed ceramic tiles in vertical surface 300x 600x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchincluding 10mm thick cement plaster in ement mortar 1:4 as backing coat on fair faces on stone surface all as specified and directed. |
| 11 | Material & Labour for Granite work (Jet/Telephonic Black) 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, counter basins, urinal partitions etc. and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types and including 15mm thick screed bed in CM 1:6set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces and half nose moulding (bull nosing) etc, complete all as specified and directed. |
| 12 | Material & Labour for Green Marble work 16 to 18mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types and including 15mm thick screed bed in CM 1:6set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces and half nose moulding (bull nosing) etc, complete all as specified and directed. |
| 13 | Material & Labour for 75 mm thick Cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection with fair finished complete. Note : Joints 12 mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection. |
| 14 | Dismantling of old pattern roofing tiles complete all as specified as directed. |
| 15 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering. |
| 16 | Supply and fixing pre-painted galvatume aluminium zinc coating (AZ-150) GI based corrugated steel sheet 0.60 mm thick of any colourhaving 550 Mpa tensile strength as in roof covering/ridge fixed with self tappingscrews, complete all as specified. Make : JSW (Coloron Plus) or equivalent. |
| 17 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 18 | Dismantling wrought iron or mild steel work as in rafter/purline and refixing after paiting in any position as directed by Engr-in -charge including necessory cutting, welding all as complete all as specified and as directed. Note :- Painting item shall be measured and paid separately. |
| 19 | Supply and fixing MS angle/FI for truss, purlins, crane ganties, rails and fastenings and heavy bracket framing including distance pieces, cleats etc. confirming to FE-410-W (Gde-E-250) quality-A all as specified as directed. |
| 20 | Supply and fixing Mild steel plain plates in available sizes (any thickness) confirming to Fe 410-W (Gde-E-250) quality-A as in base support to vertical members and support to horizontal members fixed to wall etc complete all as specified as directed. |
| 21 | Supply & Fixing framed work such as gates and similar works conforming to Fe-410 (Gde E-250) ornamental type as in gate work, complete all as specified and as directed by the EIC. |
| 22 | Material & labour for PCC 1:2:4 type B-1 (using 20mm graded mechanically crushed stone aggregate) as in bed blocks, copings, apex stones,side of interlocking tiles etc complete all as specified and directed. |
| 23 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified as directed. |
| 24 | Material & Labour for suspended false ceiling system using Chicago Metallic (E-grid) exposed suspended system, grid size 600mm x 600mm comprising of GI poweder coated main dunner fo dimensions 39mm x 24mm xx 0.8mm thick (thickness comprising of GI/0.4mm +PPPCGS/0.3mm & weight of runner 1.35 Kg for 3600mm length), cross tee of dimensions 29mm x 24mm x 0.8mm thick (thickness comprising of GI/0.4mm + PPPCGS/0.3mm & weight of Tee 0.195 Kg for 600mm length) and wall angle of dimensions 22.2mm x 22.2mm x 0.65mm thick (thickness comprising of GI / 0.35mm + PPPCGS/.3mm & weight of angle 0.70Kg for 3050mm length) with and including 4mm thick HPSC (High pressure steam cured) pre-primed, self embossed, tentured designed board to be placed in the grid system duly suspended with 4mm dia GI wire hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt-0.007 kg/clip), hold down clips (wt-0.0035 kg/clip), with provn of light fixture complete all as per manufacturer"s instructions and as directed. |
| 25 | Material & Labour PCC (1:4:8) Type D-2 using 40 mm graded stone aggregate in foundation, filling and mass concrete and sub base surface finished even & fair complete . |
| 26 | Material & Labour for Vitrified out door tiles 40 cm x 40 cm x 10-12 mm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement over & including over screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6 . |
| 27 | Material & Labour for modern design elevation tiles in vertical surfaces of columns, facades etc of sizes 300 x 200 x 5-10mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchincluding 10mm thick cement plaster in ement mortar 1:4 as backing coat on fair faces on stone surface all as specified and directed. |
| 28 | Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of steel reinforcementas required to facilitate demolition, complete all as specified. |
| 29 | Material and labour for providing reinforced cement concrete 1:2 :4 type B1 using (20mm graded stone aggregate ) as in cooking platform, slabs supported on wall, beam, cantilevers and kitchen cooking platform including necessary formwork complete all as specified. |
| 30 | Material and labour for providing precast reinforced cement concrete 1:2 :4 type B1 using (20mm graded stone aggregate ) as in MH covers etc including necessary formwork complete all as specified. (Reinforcement shall be measured and paid for under relevant item). |
| 31 | Material and labour for repair to RCC (1:2:4) type B-1 using 20 mm gradedstone aggregateas in chajjas, lintal including necessary formwork complete all as specified and directed. |
| 32 | Material and labour for repair to RCC (1:2:4) type B-1 using 20 mm gradedstone aggregateas in columns including necessary formwork complete all as specified and directed. |
| 33 | Material & Labour forTMT bars 10mm diaand over, cut to length,bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed)not less than 0.90mm dia. |
| 34 | Material andlabour mild steel TMT bars, 8 mm dia , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm diaor securing with clips, complete all as specified and directed. |
| 35 | Supplyand fixing, made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 65 mm x 125 mm(moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by "Rajshri/Echon or Eq" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed,. Material test certificate and authentication should be compoulsory provided by the manufacturing company. |
| 36 | Supply & Fixing for 2nd class hard wood 35mm thick Plain, framed, panelled shutters (06 number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete. |
| 37 | Supply and fixing IInd class (hollock) hard wood factory made 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed. |
| 38 | Supplyand fixing, made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 45 mm x 70 mm(moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by "Rajshri/Echon or Eq" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed,. Material test certificate and authentication should be compoulsory provided by the manufacturing company. |
| 39 | Supply & Fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N / m2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fie retardant WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engr-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately). |
| 40 | Supply & fixed 200 mm long aluminium anbodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 41 | Supply & fixed150 mm long 10mm dia Extruded aluminiumalloy handles, fabricatedtype anodised complete all as specified. |
| 42 | Supply & fixed100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed. |
| 43 | Supply & Fixedin repairs aluminium Hat and coat hooks, solid body, 175mm to 250 mm. |
| 44 | Supply & fixedPowder coatedaluminiumdoors/windows/ventilator fixed/openable/sliding type without sash bar, aluminium sectionweighing 0.55 kg/m including necessary jointing cleats, glazing clip,rubber packing, anodised aluminium snap beading, screw, handles etc complete all as specified. |
| 45 | Supply & fixed foranodised aluminium grill of (anodised transparent or dyedto required shade according to IS:1868 with minomum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass / stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised alumiinium standard section around the opening, all complete as per reuirement and direction of Engineer encharge. |
| 46 | Supply & fixed5 mm thick figured glass, ordinary quality and glazing rubber beading in square n exc 0.5 sqm in each pane complete. |
| 47 | Supply and fixingwire netting of stainless steel wire1.4mm dia (size of mesh 12mm) fixed with tinned tacks of stainless steel wire staples orfixing with beads to wooden joinery when fixed in panels of joinery, complete all as specified. |
| 48 | Supply & fixing in repairs stainless steel type curtain rod 22 to 25mm dia as per sample. |
| 49 | Supply & fixing of purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample as in repair. |
| 50 | Supply & fixing of stainless steel decorative fincals(round type with mirror optic finish)trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample as in repaie complete all as specified. |
| 51 | Supply & fixing of stainless steel decorative fincals wall to wall trade pattern suitable for decorative type curtain rods22 to 25mm dia as per sample as in repair complete all as specified. |
| 52 | Demolition ofbrickwork or stone/boulder masanory,laid dry below or above ground level andremovingmaterial from site complete all as specified and directed. |
| 53 | Material & Labour brick work with old size fly ash bricks straight or curved on plan exc. 6 M mean radius built in CM 1:6. |
| 54 | Material & Labourfor Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed. |
| 55 | Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth & getting out in hard soil. |
| 56 | Providing lowering, laying, aligning & fixing in position and joining at all level/depths full round HDPE DWC Pipes (Double Wall corrugated) of 200mm dia bore with reqd jointing accessories of SN-8 grade as per IS-16098 (Part-2) amended upto date in trenches in complete including all material, labour, sectional hydrotesting (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications, drawings and as per directions of Engr-in-Charge. |
| 57 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed. |
| 58 | Returning, filling in incl spreading leveling, watering and well ramming in layer n.exc 25cm in layer in soft/loose soil. |
| 59 | Costruction of Septic tank for 50 user in any type of soil/disintrigated rock complete all as specified and shown in drawings No CEJZ/TD/30 SH 1/3, 2/3 & 3/3. |
| 60 | Costruction ofSoakage wells excavation, in any type of soil/disintigrated rock, including intercepting chamber and screen chamber made of Brick masonary in CM 1:6 , RCC cover slab in M25, interconnecting pipes of RCC/DWC complete filled with brick bats of size, complete of size 3 M dia X 3.0 M effective depth as drawings No CEJZ/TD/29 SH2/3. |
| 61 | Taking down cement plaster from brick walls/stone masonry walls, concrete surfaces including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed. |
| 62 | Material andlabour for 15mm thick rendering in cement mortar (1:6) onbrick/stone masonry or concrete surfaces (internal walls) of any description, finished the surface even and smooth without using extra cement complete all as specified. |
| 63 | Material andLabour for 15mm thick average as baking coat rendering on fair faces of brick work/stone masonry,surfaces in cement mortar 1:6 rough finished even and fair, complete all as specified. |
| 64 | Material andLabour for 15mm thick rendering on fair faces of brick work/stone masonry, concrete surfaces (external walls) or stone walls in cement mortar 1:4 mixed with liquid water proofing compound using as per manufacturer’s instructions,finished even and fair, complete all as specified. |
| 65 | Supply only liquid water proofing compound, ISI marked complete all as specified and directed. |
| 66 | Material & Labour for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper (acrylic) white or tinted over a coat of 2 mm thick wall care putty, complete all as specified and directed. |
| 67 | Material & Labour for preparation of new plastered surfaces of wall and applying two coats of weather coat over a coat of 2 coat of wall care putty for neat and smooth finishing complete all as specified. |
| 68 | Material & Labour for preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper (acrylic) white or tinted over a coat of priming over a coat of 1 mm thick wall care putty on walls upto tripple storeys bldg complete all as specified and directed. |
| 69 | Material & Labour for complete removal of existing treatment and preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of weather coat over a coat of 2 coat wall care putty for neat and smooth finishing complete all as specified. |
| 70 | Material & Labour for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 71 | Material & Labour for preparation of new painted surfaces of wood and wood based surfaces of any description, over 10cm in width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 72 | Material & Labour for preparation of old painted steel surface of any description, over 10cm in width or girth not other wise described and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 73 | Material & Labour for two coat of synthetic enamel painting to new steel surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of red oxide primer complete allas specified and directed. |
| 74 | Supply & Fixed for 100mm boresand cast iron pipe in any length including jointing with cement, in walls complete all as specified. |
| 75 | Supply & Fixed for 75mm boresand cast iron pipe in any length including jointing with cement, in floor/trenchcomplete all as specified. |
| 76 | Supply & Fixed cast iron bend 100mm borecomplete all as specified. |
| 77 | Supply & Fixed cast iron bend 75mm borecomplete all as specified. |
| 78 | Supply & Fixed branch pieces cast iron single (equal or unequal) 100mm bore complete all as specified. |
| 79 | Supply & Fixed branch pieces cast iron single (equal or unequal) 75mm bore complete all as specified. |
| 80 | Material andlabour in repairs 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type-B-1 (1:2:4) using 12.5mm brick aggregate all as specified and directed. |
| 81 | Material andlabour in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement including jointing to waste pipe fixed in cement concrete type-B-1 (1:2:4) using 12.5mm brick aggregate all as specified and directed. |
| 82 | Supply & Fixing in repairs 20mm bore Gun-Metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified. |
| 83 | Supply & fixed 50mm bore LDPE (Low density Polyethylene Pipes) of pressure rating 6Kgf/Sqcm fixed complete to walls, ceilings or in floorsincluding taking down of old GI tubing, 40 mm bore all as specified and directed. |
| 84 | Supply & fixedPolymer coloured (Polypropeylene Delrin and ABS) low levelflushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet ball valve float valve bends brackets, rawl plug, brass screws handle etc complete having BIS derscriptionmark with 2731 with andincluding suitable size of MS brackets, plug, screws all as required incl taking down existinghigh level/low level flushing cistern any type disconnecting pipes and jointingwith new one etcand making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with Water closet of any type complete all as specified and directed. Make :- Hindware/Jaquar/cera |
| 85 | Supply and fixingVitreous ChinaW.H.B. whiteoval type counter below type of size 570 x 445 mm, waste pipe and brackets etc. Make :- Hindware/Jaquar/cera |
| 86 | Supply and fixing ,vitreous China squatting pan of Orrisa pattern size 580mmx440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and integral foot rests of any pattern complete including provision of lime concrete bedding, trap and connection to flush pipe complete all as specified. Make :- Hindware/Jaquar/cera. |
| 87 | Supply and fixing vitreous china premium quality/1st quality wash down water closetEWC with & incl with ‘P’ or ‘S’ trap of dia 100mm includingprovn of lime concrete bedding . Make :- Hindware/Jaquar/cera. |
| 88 | Supply and fixingplastic water closet seat white, closed pattern with flat bottom and cover and mild steel C.P. or Aluminum hinging device. Make :- Hindware/Jaquar/cera |
| 89 | Supply & Fixing inbrass CP single lever central holewash hand basing mixer hot & cold water screwed down for iron/CPVC pipe and fixedwith Connecting Legs & Wall Flanges, complete all as specified and as directed. Make :- Jaquar /cera/Marc. |
| 90 | Supply & Fixing for Brass CP Wall Mixer with Provision For Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges complete all as specified and as directed. Make :- Jaquar /cera/Marc. |
| 91 | Supply andfixing, bib tap screwed down high pressure, cast copper alloy,fancy type, ISI marked, with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified. Make :- Jaquar /cera/Marc. |
| 92 | Supply & Fixing 15mm bore concealed stop valve type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for unionall as specified and directed by Engr-in-charge. Make :- Jaquar /cera/Marc |
| 93 | Supply & Fixing in repair brass chromium plated tubular towel rail 20mm dia "D" type 60cm long between flanges all as specified and directed by Engr-in-charge. Make :- Jaquar /cera/Marc. |
| 94 | Supply & Fixing white colour rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 2000 Ltrhoisted and fixed in position after dismantling (water tank of cap exc 500 ltr and n.exc 1000 ltr) and removing to store and all as specified and directed by Engr-in-charge. |
| 95 | Supply & Fixing PTMT ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore pipesall as specified and directed by Engr-in-charge. |
| 96 | Supply & fixed for 5.5 mm thick looking mirror of selected quality, bevelled edge 600mmx750mm glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screw and cup washer, pvc beading & rubber packing complete all as specified. |
| 97 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 16mm dia bore on walls/ceiling or laying in floors or fixing as in concealed to walls or in floors etc, and making good the surfaces matching to exsiting surfaces of walls/ floor to the entire satisfaction of Engineer-in-charge. |
| 98 | All as per item above but 20mm dia bore, complete all as specified and as directed by the EIC. |
| 99 | Supply & fixedPVC connections 45cm long including 15mm bore PTMT nuts on both ends complete all as specified. |
| 100 | Supply & fixed stainless steel grating openable 100mm dia without hole including fixing with white cement complete all as specified. |
| 101 | Supply & fixedfancy type shower rose125mm dia sizeof Rim and 30cm long CP brass pipe with swiwel joint complete all as specified. |
| 102 | Supply & fixedglass shelf assembly consisting of made out of 5.5 mm thick glass shelf 12 cm wide with chromium plated bracket guard andrailing 60cm long complete all as specified and directed. |
| 103 | Supply & Fixing for CP brass Soap Dish Holder, complete all as specified and as directed.Make :- Jaquar /cera/Marc. |
| 104 | Material & labour for fabrication ofpressed steel cupboard shutterusing1mm thick MS plainsheet with frame 1.25mmthick bent toshape including two coat of synthetic enamel painton internal surfaces & two coat of hammer tonefinish on external surfacealongwithlocking arrangementmortice lock ,handle etc complete all as specified as per drg No CEJZ/TD/12/2008 sheet 1/3 to 3/3. |
| 105 | Supply andfixingfor PCC coloured interlocking (glossy finishing) paver blocks with grey cement and no pigments confirming to IS-15658-2006 of 60 mm thickness, M-35 grade asin hardstandingetc. laid over and including 50 mm thick screed or bedding layer of sand, complete all as specified. |
| 106 | Taking down old unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling rose, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc. all as directed by engineer in charge. |
| 107 | Material & Labour for point wiring with 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated, FRLS and unsheathed type alongwith 1.5 Sqmm PVC insulatedstranded copper conductor cable for continous earthing in & including PVC rigid conduit concealed on stone/brick masonrty wall surface with accessories having ISI mark fixed on wall surfaces / ceilingincluding provision of PVC box of appropriate size for fixing switches sockets etc. all as specifiedfor One light point / Fan/ bell point controlled by one switch. |
| 108 | One light point controlled by one switch with cables 1.5 sqmm size. |
| 109 | One one fan point controlled by one switch with cables 1.5 sqmm size. |
| 110 | One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables1.5 sq.mm size. |
| 111 | One 3 pin socket outlet, 5 amps on the same board with other switches, with cables 1.5 sqmm size. |
| 112 | One light point controlled by two 2 - way switches, with cables 1.5 sq.mm size. |
| 113 | One 3 Pin socket oulet 5Amps on indepndent, with cables 1.5 Sqmm size. |
| 114 | One 3 Pin 15A pin socket outlet 15Amps on indepndent board with cables 2.5 Sqmm size. |
| 115 | Supply & Fixing switch piano flush type single pole one way 5/6 Amps. |
| 116 | Supply & Fixing lamp holder, PVC/Polycarbonate typewith back plate suitable for batten fittings including dismantling old one. |
| 117 | Supply & Fixingsocket outlet 5 pin 5/6 Amps flush type multipurpose suitable for 3 pin/2 pin plug complete includingdismantling old one. |
| 118 | Supply & Fixing ofswitch piano 15 Amp 230 Volt, flush button single pole one way complete all as specified and directed by Engr-in-Charge includingdismantling old one. |
| 119 | Supply & Fixing socket outlet 2 in 1, 3 pin 5/6 Amps and 3 pin 15/16 Amps flush type including old one. |
| 120 | Supply & Fixing ceiling rose surface tpe 3 terminals to be fixed on PVC block includingdismantling old one. |
| 121 | Supply & Fixing Buzzer, Ding Dong AC. 230 volts, single pole. |
| 122 | Supply & Fixing Bell push, flush type, 5 amp. |
| 123 | Supply & Fixing switch piano flush type single pole two way 6 Amps. |
| 124 | Supply & Fixing LED integrated batten tube light fittings 20W 4 Feet long complete up with twin core twisted flexible copper conductor cable of size 23/0.0076 complete all as specfied and directed. |
| 125 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 126 | Supply and fixing decorative wall light fittings 7 watt complete all as specified and directed. |
| 127 | Supply and fixing Bed side lamp light fittings 3 watt complete all as specified and directed. |
| 128 | Material & Labour MCB TPN DB comprising of sheet metal enclosure double door suitable for mounting MCB 415 Volts 4 way includingdismantling old one. |
| 129 | Material & Labour MCB SPN DB comprising of sheet metal enclosure single door suitable for mounting MCB 240 Voltswithbusbar 200 amps rated 8 way includingdismantling old one. |
| 130 | Supply & Fixing MCB TPN 63 Amps 415V 10KA "B" curve miniature circuit breaker (MCB) and current carrying capacity in the DB complete with connection testing and commissioning. |
| 131 | Supply & Fixing RCBOs Double pole, 30mA 32 Amp rating for earth leakage, overload & short-circuit protection. |
| 132 | Supply and fixing SPN 32 Amp rating 240V, 10KA "C" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. |
| 133 | Supply and fixing SP 6 to 32 Amp rating 240V, 10KA "C" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. |
| 134 | Supply & fixing sheet metal enclosures Single pole and neutralwith a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240 Vlots. |
| 135 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). |
| 136 | Supply and fixing PVC frame exhaust fan with lover shutter of size 150mm sweep 1280 RPM, air delivery 520 CMH, power input 28 W single phase 240 Volts connected complete all as directed. |
| 137 | Material & labour for earthing complete with galvanised steel earth plate electrode 60x60cmx6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below the ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or of steel all as shown in electrical plate No 3 of SSR part-I2009 connected to main switch board all as specified and testing on completion including. Necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20mm dia GI pipe medium grade, funnel with wire mesh and lugs and GI pipe 15 mm dia of light grade,for protection of earth leadcomplete all as specified and directed. |
| 138 | Excavating in trenches n.exc 1.5 m widthand n.exc 1.5m in depth for taking out cable and cable coverand getting out in any type of soil. |
| 139 | Returning, filling in, including spreading levelling, watering and well ramming in layers n.exc 25 Cm. |
| 140 | Removing excavated materials n.exc 50 mtr depositing where directed at a level n.exc 1.5 m above the starting point. |
| 141 | Material & Labour for spreading, levelling in layers n exc. 25 cm thick and ramming of sand cushioning to PVC/ XLPE cables with tibba sand and punning to provide required cover to UG cables. Note :- For the purpose of payment only punned thickness will be measured. |
| 142 | Supply and laying reinforced precast concrete cable cover, class LV,type 1 flat, 250mm x 150mm x 40mm. |
| 143 | Taking out old unserviceable protection pipe and supply and fix medium grade50 mm dia GI pipe fix complete to wall , poles etc with suitable clamp for protection of cable complete all as directed. |
| 144 | Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size25 sq mm 3.5 core. |
| 145 | Supply & Fixing Submain wiring alongwith earth wire with the following sizes of 2x2.5 sqmm + 1x2.5sqmm earth wire FR PVC insulated copper conductor, single core cable in surface/recessed as required. |
| 146 | Supply & Fixing Submain wiring alongwith earth wire with the following sizes of 4x4.0 sqmm + 1x4.0 sqmm earth wire FR PVC insulated copper conductor, single core cable in surface/recessed as required. |
| 147 | Supply & Fixing LED decorative ceiling light fitting 2x2" panel light 24 watt complete all as specified. . Make : Havells cat Part No. PETAL 2x2PLR24WLED840S or its equivalent of Bajaj/Phillips/CG. |
| 148 | Supply & Fixing LED security light luminaries of 20 watt for energy saving having IP-65 degree of protection made of pressure die cast aluminum housing and heat resistant thoughned glass with excellent thermal management, LED"s should have better optics and uniform distribution of light including GI tubing 40mm dia light grade 1.2 mtr long pipe bent to shape 120 degree for mounting of security light and fixed to wall/pole, with suitable MS clamps 2 Nos with nut and bolt and washers including connecting complete including 2.5 sqmm stranded copper conductor of suitable length as per direction and approved by Engr-in-charge, |
| 149 | Taking down old Sheet metal enclouser and supply and fix new sheet metal enclouser cubical type factory fabricated made out of 1.6 mm thick CRCA sheet with front sideopenable single door system powder coated painted to shade RAL 7032, PL Gasket, hinged single door ,IP-55 mounting plate made out of 2mm thick CRCA sheet steel and earth bolts etc. of size 600x500x200mm all as speceified & directed by Engr-in- charge. Note :-- Cost of any minor modification if required in fixing of the sheet metal enclouser as per site requirement and making good the disturbed surfaces matching with existing finish, will be deemed to be included in the cost of this item. |
| 150 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. |
| 151 | Material and labour for cutting holes in brick walls/stone walls as existing in cement mortar for fixing of exhaust fan of 200mm sweep and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required. |
| 152 | Material & Labour for cold mix emulsion granules road patching material in making good of road surface upto 40mm thick. |
| 153 | Supply and Laying GI TUBING25 mm diasocket ends, Class Bmedium grade including all fittings and accessories, in any length,fixed on wall / ceiling / roof/laid in floor all as directed by Engr-in-Charge. |
| 154 | Supply & Fixing G M gate valves with iron wheel head, screwed both ends for iron pipe and fixed of size 25 mmISI marked. |
| 155 | Supply and Laying GI TUBING20 mm diasocket ends, Class Bmedium grade including all fittings and accessories, in any length,fixed on wall / ceiling / roof/laid in floor all as directed by Engr-in-Charge. |
| 156 | Supply and Laying GI TUBING15 mm diasocket ends, Class Bmedium grade including all fittings and accessories, in any length,fixed on wall / ceiling / roof/laid in floor all as directed by Engr-in-Charge. |
| 157 | Supply & Fixing G M gate valves with iron wheel head, screwed both ends for iron pipe and fixed of size 15 mmISI marked. |
| 158 | Material & Labour for connection of 25mm dia GI pipe from existing 25MM dia GI pipe including cutting and insertion of Tee, Reducer, Sockets etc alongwith all required fittings like Union, Tee with nut & bolts, washers etc complete all as directed by Engr-in-Charge. Note: Excavation & earth work shall be measured & paid separatetly. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
