|
| 1 | COMPLETE 200 NB DOME VALVE ASSEMBLY CONSISTING OF C.I. DOME, (W.C.T.P.), AIR LIMIT SWITCH, SILICON INSERT SEAL & AIR CYLINDERWITH PNEUMATIC PANEL |
| 2 | DOME |
| 3 | INSERT SEAL (SILICON) |
| 4 | INSERT RING |
| 5 | SPIGOT PIECE |
| 6 | TOP PLATE (WATER COOLED) |
| 7 | EXTERNAL V-RING |
| 8 | O-RING (SILICON) |
| 9 | BEARING |
| 10 | SHAFT SEAL |
| 11 | SEAL SPACER |
| 12 | SPRING PIN INNER |
| 13 | SPRING PIN OUTER |
| 14 | TORQUE ARM |
| 15 | BEARING TORQE ARM |
| 16 | STRIKER ARM |
| 17 | CYLINDER SUPPORT ARM |
| 18 | RETAINING COLLAR |
| 19 | GASKET DOME TO VESSEL (NON ASBESTOS) |
| 20 | PIVOT SHAFT (S.S. 316) |
| 21 | VALVE BODY |
| 22 | GASKET (NON ASBESTOR 1.5 THK.) |
| 23 | GASKET (NON ASBESTOR 0.8 THK.) |
| 24 | GASKET (NON ASBESTOR 0.4 THK.) |
| 25 | O-RING (SPIGOT RING) |
| 26 | PNEUMATIC & INSTRUMENTATION ITEMS |
| 27 | BAL VALVE- 1/2\" |
| 28 | FILTER/LUB./VALVE UNIT 1/2\" + MTG. KIT |
| 29 | PRESSURE SWITCH (SEAL+CONVEY) |
| 30 | PRESSURE SWITCH (VESSEL PR. LOW) |
| 31 | PRESSURE SWITCH (VESSEL PR. HI) |
| 32 | 2/2 DIAPHRAGM OPTD. SOLENOID VALVE,1/2\",24VDC |
| 33 | SOLENOID VALVE 1/4\", 5/2 SINGLE COIL, 24V DC |
| 34 | SOLENOID VALVE 1/4\", 5/2 DOUBLE COIL, 24V DC |
| 35 | QUICK EXHAUST VALVE 3/4\" |
| 36 | QUICK EXHAUST VALVE 1/4\" |
| 37 | AIR CYLINDER Ø100 x 250mm |
| 38 | AIR LIMIT SWITCH 1/4\" |
| 39 | EXHAUST SILENCER 1/2\" |
| 40 | PERSSURE GAUGE [0-10 Kg/Cm²],4\" DIAL |
| 41 | PERSSURE GAUGE [0-6 Kg/Cm²],4\" DIAL |
| 42 | CONNECTOR (MF-20-15-35) |
| 43 | BAR MANIFOLD-5 WAY FOR 1/4\"VALVES |
| 44 | FLOW ADJUSTER NIPPLE(M-050-9+3-050) |
| 45 | FLOW ADJUSTER NIPPLE(S-025-090) |
| 46 | FLOW ADJUSTER NIPPLE(M-040-8+4-050) |
| 47 | SPECIAL FITTING WITH CHECK NUT |
| 48 | PUSH BUTTON + CONTACT BLOCK |
| 49 | PUSH BUTTON + CONTACT BLOCK |
| 50 | PUSH BUTTON + CONTACT BLOCK |
| 51 | PUSH BUTTON + CONTACT BLOCK |
| 52 | 2 POS. SEL. SW. + CONTACT BLOCK |
| 53 | INDICATING LAMP (LED TYPE), 24 V DC |
| 54 | PU-6 TUBING (PER MTR.) |
| 55 | PU-8 TUBING (PER MTR.) |
| 56 | PU-13 TUBING (PER MTR.) |
| 57 | FESTO FITTING FOR PU-6 (01 SET = 07 NOS.) |
| 58 | FESTO FITTING FOR PU-8 (01 SET = 05 NOS.) |
| 59 | FESTO FITTING FOR PU-13 (01 SET = 03 NOS.) |
| 60 | FLEXIBLE HOSE SIZE 1/2\", (GALVANISED ENDS) GRADE-R6 (PER MTR) |
| 61 | FLEXIBLE HOSE SIZE 1/4\", (GALVANISED ENDS) GRADE-R6 (PER MTR) |
| 62 | FLEXIBLE HOSE SIZE 3/ 8\", (GALVANISED ENDS) GRADE-R6 (PER MTR) |
| 63 | VESSEL BOSSTER ASSEMBLY |
| 64 | SEAL KITS & REPAIR KITS |
| 65 | SEAL KIT FOR AIR CYLINDER DIA100 x 250, STROKE (ISO Cylinder) (B3275) |
| 66 | SEAL KIT FOR 50 NB BLOW/POPPET VALVE (MB1301D) |
| 67 | REPAIR KIT FOR 50 NB BLOW /POPPET VALVE (MB1301D) |
| 68 | SEAL KIT FOR 2/2 DIAPHRAGM OPTD. SOLENOID VALVE, 1/2\",24VDC (B2348) |
| 69 | REPAIR KIT FOR SOLENOID VALVE 1/4\", 5/2 SINGLE COIL, 24V DC (B1502) |
| 70 | REPAIR KIT FOR SOLENOID VALVE 1/4\", 5/2 DOUBLE COIL, 24V DC (B1504) |
| 71 | SEAL KIT FOR QUICK EXHAUST VALVE 3/4\" (B1051) |
| 72 | SEAL KIT FOR QUICK EXHAUST VALVE 1/4\" (B1052) |
| 73 | SEAL KIT FOR AIR LIMIT SWITCH 1/4\" (MB6764D) |
| 74 | DENSEVEYOR MODEL 6/8/5 BELOW PYRITE HOPPER FOR BOILER UNIT# 1 & 2 AS PER DRG. NO. MB/C-1123/76021D RA |
| 75 | BARE SHELL VESSEL OF DENSVEYOR MODEL D6/8/5 WITH LEGS BUT WITHOUT ANY OTHER ITEM SUCH AS PIPING & DOME VALVE D6/8/5 |
| 76 | ABS (MS ERW FLANGED PIPE AS PER IS:1239 P2) |
| 77 | OUTLET BEND |
| 78 | PYRITE HOPPER BELOW DISCHARGE OF MILL A, B, C, D & E OF UNIT # 1 & 2 AS PER DRG. NO. MB/C-1123/77810D (SHEET 1 OF 2) R1 |
| 79 | PYRITE HOPPER BODY (10 MM THICK) |
| 80 | METALIC EXPANSION BELLOW |
| 81 | 200 NB OUTLETADAPTER |
| 82 | 200 NB INLET ADAPTOR |
| 83 | GRID (SIZE 70X50) one set has 2 Nos |
| 84 | BUNKER DISCHARGE GATE (HAND LEVER OPERATED) BELOW MILL REJECTS BUNKER FOR UNIT # 1 & 2 AS PER DRG. NO. MB/C- 1123/76020D RA |
| 85 | SECTOR GEAR ASSEMBLY - 1 |
| 86 | SECTOR GEAR ASSEMBLY - 2 |
| 87 | BOTTOM LINER PLATE - 1 (10 THICK) (SAIL HARD) |
| 88 | BOTTOM LINER PLATE - 2 (10 THICK) (SAIL HARD) |
| 89 | 200 NB KNIFE GATE VALVE WITH CYLINDER ACTUATOR AT INLET & BYPASS CHUTE OF PYRITE HOPPER AS PER DRG. NO. VAAS-04- K8520 R0Location: At Inlet Of Pyrite Hopper & By-Pass Chute |
| 90 | 200 Nb Knife Gate Valve (Hand Wheel Operated) At Outlet And At Oversize Discharge Pipe Of Pyrite Hopper As Per Drg. No. Vaas-04-K8521 R0 |
| 91 | METALLIC EXPANSION JOINT BETWEEN PYRITE HOPPER & SPOOL PIECE FOR BOILER UNIT 1 & 2 AS PER DRG. NO. MB/C-1123/76022D R1 |
| 92 | 200 NB PRESSURE RELIEF VALVE AT TOP OF MILL REJECTS BUNKER FOR UNIT # 1 & 2 AS PER DRG. NO. MB/C-1123/76018D R0 |
| 93 | SEAL ID 180 X OD 240 X 20 THICK |
| 94 | BAG FILTER MODEL DLMV 30/15W AT TOP OF MILL REJECTS BUNKER AS PER DRG. NO. MB/C-1123/76023D RA |
| 95 | SOLENOID OPERATED DIAPHRAGM VALVE (1\"WITH 1\" CONNECTIONS) |
| 96 | COMPLETE 50 NB BLOW / POPPET VALVE ASSEMBLY |
| 97 | CYLINDER CAP |
| 98 | INNER SPRING \"#\" |
| 99 | PISTON ROD ASSEMBLY |
| 100 | VALVE BODY |
| 101 | PISTON ROD GUIDE |
| 102 | VALVE DISC |
| 103 | VALVE SEAT |
| 104 | SEAL RETAINING WASHER |
| 105 | \"O\" RING \"x\" |
| 106 | \"O\" RING \"x\" |
| 107 | \"U\" RING \"x\" |
| 108 | \"O\" RING \"x\" |
| 109 | AEROTIGHT NUT \"#\" |
| 110 | \"O\" RING \"x\" |
| 111 | \"O\" RING \"x\" |
| 112 | \"O\" RING \"x\" |
