Ministry Of Road Transport And Highways has published Tender For Repair And Rehabilitation Of Samsi Bridge At Km 20.850 And Kanua Bridge At Km 38.40 On Nh 31 Old Nh 81 Under Nh Division No. Vii In The District Of Malda West Bengal During The Year 2023 2024 On Sbd Mode. Job No. Nh 81 Wb 2023 24 545. Submission Date for this Tender is 17-04-2024. Bridge Work Tenders in malda West Bengal. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 03-Apr-2024 | 1ST CORRIGENDUM | Technical Bid | 17-04-2024 |
| Sl. No. | Item Description |
| 1 | ( A ) SAMSI BRIDGE (KM 20.850) OF NH-31 Dismantling of Structures Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres (Reference to MORT&H"s specification clause 202) |
| 2 | Cleaning the exposed corroded Reinforcement as well as worn out concrete by sand blasting with air compressor including all materials, hire charges of machineries and labour etc. all complete as per technical specification and direction of the Engineer-in-Charge. |
| 3 | Patching of damaged concrete surface with polymer concrete and curing compounds, initiator and promoter, available in present formulations, to be applied as per instructions of manufacturer and as approved by the Engineer (Reference to MORT&H"s specification 2800).Thickness of patching = 25mm |
| 4 | Guniting concrete surface with cement mortar applied with compressor after cleaning surface and spraying with epoxy complete as per Technical Specification (Reference to MORT&H"s specification 2807). |
| 5 | Epoxy bonding of new concrete to old concrete ( crack/spalling shall be sealed with epoxy injection/grouting coating of epoxy resin @ 0.80kg /sqm should be applied ) (Reference to MORT&H"s specification 2805). |
| 6 | Providing anti-corrosive protective coating to inhibit the corrosion to HYSD reinforcements including two coats of anti-corrosive coatings of consumption as per manufacturer"s specification, cleaning etc. complete as per the direction of the Engineer-in-Charge. |
| 7 | Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy (Reference to MORT&H"s specification 2800). |
| 8 | Sealing of cracks/porous concrete (within the limits of practical pressure 100kpa -400kpa until refusal ) by injection process through nipples/Grouting complete as per Technical Specification (Reference to MORT&H"s specification 2806). Cement Grout |
| 9 | Sealing of crack / porous concrete with Epoxy Grout by injection through nipples complete as per clause 2803.1 (Reference to MORT&H"s specification 2803). |
| 10 | Excavation in Soil by Manual Means Excavation for roadway in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto 1000 metres (Reference to MoRT&H"s specification clause 301). |
| 11 | Plain/Reinforced cement concrete in sub-structure complete all including vibrating and compacting, finishing, curing, sampling, testing etc. by mechanically mixed as per drawing and Technical Specifications (Reference to MORT&H"s specifications 1500, 1700 & 2200). RCC Grade M20 Height upto 5m Using concrete Mixer |
| 12 | Supplying, binding, fixing etc. including initial straightening, cutting to requisite length, hooking and bending to correct shape, placing in proper postion of uncoated HYSD reinforcement bar in super-structure complete as per drawing and technical specifications (Reference to MORT&H"s specification 1600) |
| 13 | Flexible Apron :(Shall be provided beyond curtain walls for a min distance of 3m on u/s and 6m on d/s side ) Construction of flexible apron 1 m thick comprising of loose stone boulders weighing not less than 40 kg beyond curtain wall (Reference to MORT&H"s specification 2507.2). |
| 14 | Drainage Spouts not less than 100 mm dia of corrosive resistance material ,spacing not exceeding 10 m. complete as per drawing and Technical specification (Reference to MORT&H"s specification 2705). |
| 15 | Hire and labour charges for staging with sal bullah for super structure of bridge (Major and Minor) including stripping off and removing clearing on completion of work as per design and drawing approved by the Engineer-in-charge. |
| 16 | Painting on concrete surface Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm (Reference to MORT&H"s specification 800). |
| 17 | Plain/Reinforced cement concrete in open foundation complete all including vibrating and compacting, finishing, curing, sampling, testing etc. as per drawing and Technical Specifications (Reference to MORT&H"s specifications 1500, 1700 & 2200). PCC Grade M15 |
| 18 | Brick masonry work with 1st class full size bricks except when necessary to complete the bond in cement morter 1:3 in sub-structure complete, including thoroughly soaking the bricks in a tank filled with water for a minimum period of one hour prior to being laid, protecting the green structure from rain by suitable covering and with a minimum Seven days curing etc., but excluding pointing and plastering, as per drawing and Technical. Specifications.(Reference to MORT&H"s specifications 1300 & 2200).. |
| 19 | Plastering with cement mortar (1:3) on brick work in sub-structure complete all including raking out joints curing, etc as per Technical Specifications (Reference to MORT&H"s specifications 1300 & 2200). |
| 20 | (B) KANUA BRIDGE (KM 38.400) OF NH-31 Dismantling of Structures Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres (Reference to MORT&H"s specification clause 202) |
| 21 | Cleaning the exposed corroded Reinforcement as well as worn out concrete by sand blasting with air compressor including all materials, hire charges of machineries and labour etc. all complete as per technical specification and direction of the Engineer-in-Charge. |
| 22 | Patching of damaged concrete surface with polymer concrete and curing compounds, initiator and promoter, available in present formulations, to be applied as per instructions of manufacturer and as approved by the Engineer (Reference to MORT&H"s specification 2800).Thickness of patching = 25mm |
| 23 | Guniting concrete surface with cement mortar applied with compressor after cleaning surface and spraying with epoxy complete as per Technical Specification (Reference to MORT&H"s specification 2807). |
| 24 | Epoxy bonding of new concrete to old concrete ( crack/spalling shall be sealed with epoxy injection/grouting coating of epoxy resin @ 0.80kg /sqm should be applied ) (Reference to MORT&H"s specification 2805). |
| 25 | Providing anti-corrosive protective coating to inhibit the corrosion to HYSD reinforcements including two coats of anti-corrosive coatings of consumption as per manufacturer"s specification, cleaning etc. complete as per the direction of the Engineer-in-Charge. |
| 26 | Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy (Reference to MORT&H"s specification 2800). |
| 27 | Sealing of cracks/porous concrete (within the limits of practical pressure 100kpa -400kpa until refusal ) by injection process through nipples/Grouting complete as per Technical Specification (Reference to MORT&H"s specification 2806). Cement Grout |
| 28 | Sealing of crack / porous concrete with Epoxy Grout by injection through nipples complete as per clause 2803.1 (Reference to MORT&H"s specification 2803). |
| 29 | Excavation in Soil by Manual Means Excavation for roadway in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto 1000 metres (Reference to MoRT&H"s specification clause 301). |
| 30 | Supplying, binding, fixing etc. including initial straightening, cutting to requisite length, hooking and bending to correct shape, placing in proper postion of uncoated HYSD reinforcement bar in super-structure complete as per drawing and technical specifications (Reference to MORT&H"s specification 1600) |
| 31 | Flexible Apron :(Shall be provided beyond curtain walls for a min distance of 3m on u/s and 6m on d/s side ) Construction of flexible apron 1 m thick comprising of loose stone boulders weighing not less than 40 kg beyond curtain wall (Reference to MORT&H"s specification 2507.2). |
| 32 | Drainage Spouts not less than 100 mm dia of corrosive resistance material ,spacing not exceeding 10 m. complete as per drawing and Technical specification (Reference to MORT&H"s specification 2705). |
| 33 | Hire and labour charges for staging with sal bullah for super structure of bridge (Major and Minor) including stripping off and removing clearing on completion of work as per design and drawing approved by the Engineer-in-charge. |
| 34 | Painting on concrete surface Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm (Reference to MORT&H"s specification 800). |
| 35 | Plain/Reinforced cement concrete in open foundation complete all including vibrating and compacting, finishing, curing, sampling, testing etc. as per drawing and Technical Specifications (Reference to MORT&H"s specifications 1500, 1700 & 2200). PCC Grade M15 |
| 36 | Brick masonry work with 1st class full size bricks except when necessary to complete the bond in cement morter 1:3 in sub-structure complete, including thoroughly soaking the bricks in a tank filled with water for a minimum period of one hour prior to being laid, protecting the green structure from rain by suitable covering and with a minimum Seven days curing etc., but excluding pointing and plastering, as per drawing and Technical. Specifications.(Reference to MORT&H"s specifications 1300 & 2200).. |
| 37 | Plastering with cement mortar (1:3) on brick work in sub-structure complete all including raking out joints curing, etc as per Technical Specifications (Reference to MORT&H"s specifications 1300 & 2200). |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
