Tender For Civil Work For Hed Workshop 27019873 10 10 10 BACKFILLING JOB 950 M3 20 PROVIDING & LAYING OF PCC 230 M3 30 REINFORCED CEMENT CONCRETE M30 GRADE 100 M3 40 RCC-M30 -FLOORING INCLUDING SHUTTERING 570 M3 50 P/E FORMWORK 100 M2 60 P/B REINFORCEMENT BARS 80 TO 70 FILLING 300 MM THICK SLAG BELOW PCC 500 M3 80 BRICK MASONRY(230 MM THICK)INCL.BRICKS 320 M3 90 PROVIDING AND LAYING BRICK MASONRY 150 M3 100 P & L SANDFACE PLASTER-INCL CEMENT 1,700 M2 110 P & L Neeru finish smooth Plaster 1,950 M2 120 P/A WHITE CEMENT PUTTY TO INTERNAL SURFA 1,950 M2 130 DISTEMPER TO INTERNAL SURFACE OF WALLS 1,750 M2 140 WEATHER PROOF PAINTING TO EXTERNAL SURFA 1,500 M2 150 PROVIDING & FIXING OF WASH BASIN 5 NO 160 P & F of Urinal Including all Fixtures 10 NO 170 S&F WHITE MARBLE URINAL PARTITION 10 EA 180 P & F EWC Including all Fixtures 5 NO 190 P & FIXING CERAMIC/VITRIFIED TILES 450 M2 200 P & F ANTI-SKID CERAMIC FLOOR TILES 55 M2 210 FIXING WALL AND FLOOR TILES. 1,023 FT2 220 PROVIDING AND FIXING MIRROR 60 NO 230 S&F LIQUID SOAP CONTAINER 7 EA 240 P&F OF PVC NANHI TRAP 18 NO 250 Providing & Fixing Bib coke 20 NO 260 PROVIDING & FIXING PVC PIPE - DN 75MM 100 M 270 PROVIDING & FIXING OF PVC PIPE 180 M 280 PROVIDING AND FIXING OF UPVC PIPE 150 M 290 PROVIDING & FIXING OF UPVC PIPE 110 M 300 PROVIDING AND FIXING OF UPVC PIPE 90 M 310 SUPPLY OF PVC PIPE 100 M 320 CONST OF PAVEMENT QUALITY CONCRETE(PQC) 420 M3 330 CONST OF DRY LEAN CONCRETE(DLC) 140 M3 340 SLAG FILLING & SPREADING 280 M3 350 SLAG FILLING & LEVELING INCL. COMPACTION 700 M3 360 PROV.AND GROUTING GP2(FOSROC)AS PER SPE. 2 M3 Email : DARSHAN.LANGALIA2@AMNS.IN Contact : Name : Darshan Langalia Item Details : Line 10 Service No - 3012815 BACKFILLING JOB With selected excavated earth-Backfilling around foundations, trenches, sumps, pits, substructures, tunnel, walls etc. at all depth with stacked soil near construction boundary including placing, spreading, watering, hammering and even compaction by plate compactor or any other mean instructed by Engineer-in-charge to achieve CBR Value 4 (compaction should be at least 95% of standard proctor density), thickness of backfilled layers should not exceeding 150 mm in depth, complete bye works as per specification or instruction by Engineer-in-charge. (The measurement for payment shall be for the theoretical net volume only as per drawing i.e. for the volume of the block of the Backfilling having the depth and maximum bottom dimensions of the foundation/structures as per drawing. ) Line 20 Service No - 3005419 PROVIDING <(>&<)> LAYING OF PCC Providing and laying plain cement concrete with 40 mm down graded coarse aggregates in blinding layer/fill under R.C.C. <(>&<)> masonry foundations, bottom of pits, sumps, channels, tie beams, grade slabs ,floorings,footings, tanks, storm water drain, pipe encasing including ramming , levelling, curing etc. complete. Cost of required form work is a part of this item (Mode of measurement shall be as per IS code) line 30 Service No - 3012665 REINFORCED CEMENT CONCRETE M30 GRADE Supplying Providing and placing of Batching Plant Mixed Concrete for following items, for super structure above plinth level to 6.00m height ,including compacting with mechanical vibrators, curing etc. <(>&<)> excluding reinforcement <(>&<)> formwork (concrete for liquid retaining structures and others as called for shall be water tight) complete bye work including cost of plasticizer ,waterproofing compound or any other admixture as per instruction of Engineer-incharge. a) Columns, beams, slab, walls, staircase waist slab and steps, lintels,Chajjas etc. with M30 grade concrete having 20 mm down graded coarse aggregate. (Mode of measurement shall be as per IS code) Line 40 Service No - 3016078 RCC-M30 -FLOORING INCLUDING SHUTTERING Supplying <(>&<)> providing flooring with reinforced cement concrete of grade M30 as defined by IS:456 with 20 mm down graded stone aggregates in panels of approved sizes including providing side-shuttering for panels with M.S. channels, vibrating the concrete with immersion and surface vibrators and finishing the top surface by floating and trowelling to required level and grade using skim floater fitted with a floating disc and/or trowelling blades of approved make, covering the finished concrete surface with approved polythene sheets, including curing, all as per drawings, manufacturers specifications and directions of the Engineer, all materials, tools, plant and labour complete. Line 50 Service - 3012666 P/E FORMWORK Providing, erecting and removing formwork for concrete items including forming chamfers, drip moulds, pockets etc. and including scaffolding, centring, finishing concrete surface after striking the formwork etc. complete (Net area of concrete formed shall be measured): For all levels. Page 2 of 6 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000108429 Date 15.03.2024 Submission Date 25.03.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Dhwanil Dave Contact Email DHWANIL.DAVE@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details Line 60 Service No - 3013924 P/B REINFORCEMENT BARS cleaning, cutting, bending, supporting, placing, binding with 16 SWG soft annealed wire and placing in position steel reinforcement on/at all levels and locations as per drawings, including handling and transport inside plot premises complete for all R.C.C. Works including supplying <(>&<)> placing concrete cover block etc. complete. weight of laps, chairs , spacers and required supports will be paid as per IS code. Line 70 Service No - 3013935 FILLING 300 MM THICK SLAG BELOW PCC Filling 300 mm thick slag below PCC to provide proper bed for PCC. As per soil investigation report also compacted GSB or Rubble of 300 mm thick is advisable for shallow foundation. As per current soil condition layer of slag required to provide proper levelled bed for PCC. Line 80 Service No - 3003016 BRICK MASONRY(230 MM THICK)INCL.BRICKS Providing Brick masonry 230 mm thick in cement mortar 1:4 in foundation including Providing <(>&<)> Fixing chicken wire mesh (of best quality Galvanized or as specified in drawings or instructed by Engineer In charge) in strips of 200 mm widths over junctions between concrete <(>&<)> masonry including screw,nails and washers prior to plastering, including curing etc. Complete bye work as per instruction of Engineer In charge, at all level. a) 230mm thick Brick Work. Line 90 Service No - 3012480 PROVIDING AND LAYING BRICK MASONRY Providing brickwork in cement mortar of following proportions in superstructure including all types of facing, coping, bands, projections, parapets, ornamental cor-nices, string course and reinforced brickwork (Concrete band shall be provided at every 1m height. Two numbers of 8 mm diameter reinforcement bars shall be provided in each concrete band. Reinforcement shall be paid separately under respective item)and at any other location, of circular, curved or any shape including mould-ing and cutwork at all lead and heights, curing, scaf-folding including Providing <(>&<)> Fixing chicken wire mesh (of best quality Galvanized or as specified in drawings or instructed by Engineer In charge) in strips of 200 mm widths over junctions between concrete <(>&<)> masonry including srew,nails and washers prior to plastering, including curing etc. complete with all bye works as per drawing, specification and instruc-tions of the Engineer In charge, with bricks of approved quality.No saperate payment will be made for form work, scaffolding or other related works. a)115 mm thick (in cement mortar 1:4). Line 100 Service No - 3011850 P <(>&<)> L SANDFACE PLASTER-INCL CEMENT Providing 20 mm thick exterior sand faced cement plaster in two layers (First layer of 12mm thick and second layer of 8mm ) including fixing chicken mesh at joints of RCC Beams, Columns with Masonary at all heights <(>&<)> locations for cement mortar 1:3 for external surfaces including chipping concrete surface, providing, bands, drip moulds, grooves etc. finishing, curing, scaffolding etc. complete all bye work, including integral Waterproofing compound Emperor or approved equivalent @1kg/cement bag and a coat of adhesive if required complete. Line 110 Service No - 3012014 P <(>&<)> L Neeru finish smooth Plaster Providing internal plaster 12 mm thick float finish in cement mortar 1:4 at all joints of RCC Beams, Columns with Masonary at all heights <(>&<)> locations for walls, columns, beams etc. including . including chipping ,hacking, concrete surface, coat of adhesive for bonding if required, finishing with desired finish , scaffolding, providing grooves, bands, carvings, mouldings, curing etc. complete all bye work. Line 120 Service No - 3013929 P/A WHITE CEMENT PUTTY TO INTERNAL SURFA Supplying, Providing and applying White Cement putty to Internal surface of wall <(>&<)> Ceiling for smooth finish over plastered surface at all heights <(>&<)> locations for walls, columns, beams ,Ceiling etc. . including finishing, scaffolding, providing grooves, bands, carvings, Page 3 of 6 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000108429 Date 15.03.2024 Submission Date 25.03.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Dhwanil Dave Contact Email DHWANIL.DAVE@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details mouldings, curing etc. complete all bye work. Line 130 Service No - 3013928 DISTEMPER TO INTERNAL SURFACE OF WALLS Finishing walls at all heights with Two or more coats of Oil bond /synthetic distemper of approved shade, brand and quality on plaster work, over and including priming coat to give an even shade as per specification or instruction of Engineer In charge. Line 140 Service No - 3013930 WEATHER PROOF PAINTING TO EXTERNAL SURFA Finishing walls at all heights with two or more coats to get even shade or surface of Acrylic Smooth exterior paint or equivalent of required shade, brand (manufacture) and quality on plaster work, over and including priming coat to give an even shade. line 150 Servuce No - 3008204 PROVIDING <(>&<)> FIXING OF WASH BASIN P/F Counter top wash basins light colourwash Pillar Cock and necessary fittings including granite platformsupports as per specifications. NosSupplying, providing and fixing good quality approved make and design white glazed Counter top wash basinsincluding painted heavy quality C.I. brackets screwed to wall with rawl plug, bolts and screws, 1 No. 15 mm C.P.brass pillar tap of approved make, CP brass stop cock, PVC connector, 32 mm C.P. brass waste complete with C.P.bottle trap heavy quality with C.P. brass pipe pieces up to wall or floor level plus 40 mm heavy class GI waste pipewith fittings embedded in floor /wall from 32 mm C.P. waste extension pipe to the C.I. waste shaft / Nahani trap onthe outside wall complete with brass unions and plumbers wiped soldered joints as directed, with necessarycleaning eyes, with 15mm CP brass angle cock and PVC connector and pillar with all necessary fittings of heavyquality with brass unions at both ends up to 450mm connected to pillar tap including making chases and holes andmaking good the same, painting the GI waste pipes with 2 coats of anti-corrosive bitumastic paint etc. completebye work. including granite platform supports as per specifications. No separate payment for granite platform will bepaid Line 160 Service No - 3008205 P <(>&<)> F of Urinal Including all Fixtures Supplying, providing and fixing in position best quality white glazed vitreous China flat back half stall type urinal ofapproved make and design 325 mm x 310mm x 420 mm minimum size as per IS: 2556 (Part-VI/Sec.2) withapproved manually operated low level PVC flushing cistern with 25mm CP brass flush pipe concealed in wall,supported on cast iron brackets, CP brass angle / concealed stop cock, PVC connector, with brass unions at endsjointing to cistern Line 170 Service No - 3014107 S<(>&<)>F WHITE MARBLE URINAL PARTITION Supplying, providing and fixing in position best quality of 25mm thick 600mm wide black fine polished granitepartition between urinals including cutting ,moulding fixing in the required shape at position with true line ,plum asper specifications in cement mortar 1:3 jointed with neat cement slurrymixed with pigment to match including pointing, curing, polishing etc. Complete all by work Line 180 Service No - 3008224 P <(>&<)> F EWC Including all Fixtures P/F European type Water Closet Light Coloured NosProviding and fixing in position wash down European type Water Closet of best approved make conforming toIS:2556 (Part-II) including `P or `S trap with integral anti siphonage opening for vent pipe, of approved make, CI soilpipe and plug bend, as per IS:3989; 10 lit capacity low level symphonic type wall mounted flushing cistern (IS:774),CP brass concealed stop cock, PVC connecting pipe with CP covering tube, ball cock with 15 mm dia. inlet withoverflow pipe arrangement, 32 mm dia. GI brass flush pipe <(>&<)> solid variety heavy duty plastic seat cover with chromeplated hinges Page 4 of 6 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000108429 Date 15.03.2024 Submission Date 25.03.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Dhwanil Dave Contact Email DHWANIL.DAVE@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details <(>&<)> heath faucet with fittings all complete as per IS:2548 specifications or as per instructions of Engineer In charge Line 190 Service - 3003314 P <(>&<)> FIXING CERAMIC/VITRIFIED TILES Providing placing and fixing of ceramic / Vitrified tile tiles of 600X600MM of approved make by Engineer Incharge, shade and size, in floors with neat cement slurry, mixed with pigment, including pointing, curing ,wastage etc. complete all bye work.including 100mm high skirting to walls . Area for measurement will be considered cleardistances between wall to wall. Line 200 Service No - 3013536 P <(>&<)> F ANTI-SKID CERAMIC FLOOR TILES Providing placing and fixing of anti skid ceramic tiles 300mmx300mm size of approved by Engineer In charge,shade and size, in floors with neat cement slurry, mixed with pigment, including pointing, curing ,wastage etc.complete all bye work. Area for measurement will be considered clear distancesbetween wall to wal Line 210 Service No - 3003048 FIXING WALL AND FLOOR TILES. Providing, placing and fixing of coloured glazed ceramic tiles in dado and skirting with neat cement slurry mixedwith pigment, pointing, curing etc.complete all bye work Line 220 Service No - 3016031 PROVIDING AND FIXING MIRROR Providing <(>&<)> Fixing Mirror of size 600X450 MM with neccesary fittings Line 230 Service No - 3014104 S<(>&<)>F LIQUID SOAP CONTAINER Providing <(>&<)> Fixing Liquid soap dispensers Plastic NosProviding and fixing plastic liquid soap dispensers with CP brackets, cap etc. complete of approved make and design. Line 240 Service No - 3017790 P<(>&<)>F OF PVC NANHI TRAP Supplying, providing and fixing C.I. floor trap / Nahani trap of heavy quality with grating, fixed incement concrete, 1:2:4 connecting to C.I. pipe/bend, with lead joints including cutting holes in walls / floors andmaking good the same, finishing to interior portion of floor opening with cement plaster with floating coat in CM (1:3)etc. complete, with CP brass grating - insects entry proof removable type of approved quality Line 250 Service No - 3008970 Providing <(>&<)> Fixing Bib coke Supplying, providing and fixing 15 mm dia. C.P. brass bib cocks conforming to IS: 781 of tested quality andapproved make and design with IS mark Line 260 Service No - 3004784 PROVIDING <(>&<)> FIXING PVC PIPE - DN 75MM Providing <(>&<)> fixing 75mm dia 6kg PVC pipe RmtProviding and fixing PVC pipes laying in Concrete or masonry wall, having including all related fittings, includingfixing the pipe at required spacing. This includes clamps,screws,scaffolding for fixing ,jointing of pipes <(>&<)> fittings withone step solvent cement Line 270 Service No - 3012245 PROVIDING <(>&<)> FIXING OF PVC PIPE Providing <(>&<)> fixing 50mm dia 6kg PVC pipe RmtProviding and fixing PVC pipes laying in Concrete or masonry wall, having including all related fittings, includingfixing the pipe at required spacing. This includes clamps,screws,scaffolding for fixing ,jointing of pipes <(>&<)> fittings withone step solvent cement Line 280 Service No - 3012249 PROVIDING AND FIXING OF UPVC PIPE Providing and fixing 38 MM UPVC pipes laying in Concrete or masonry wall, having including all related fittings, includingfixing the pipe at required spacing. This includes clamps,screws,scaffolding for fixing ,jointing of pipes <(>&<)> fittings withone step solvent cement Page 5 of 6 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000108429 Date 15.03.2024 Submission Date 25.03.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Dhwanil Dave Contact Email DHWANIL.DAVE@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details Line 290 Service No - 3012246 PROVIDING <(>&<)> FIXING OF UPVC PIPE Providing and fixing 25 MM UPVC pipes laying in Concrete or masonry wall, having including all related fittings, includingfixing the pipe at required spacing. This includes clamps,screws,scaffolding for fixing ,jointing of pipes <(>&<)> fittings withone step solvent cement Line 300 Service No - 3012249 PROVIDING AND FIXING OF UPVC PIPE Providing and fixing 15 MM UPVC pipes laying in Concrete or masonry wall, having including all related fittings, includingfixing the pipe at required spacing. This includes clamps,screws,scaffolding for fixing ,jointing of pipes <(>&<)> fittings withone step solvent cement line 310 Service No - 3005551 SUPPLY OF PVC PIPE Providing and fixing PVC rain water down take pipes conforming to IS:13592 at all height and elevation with G.I. clamps of approved quality including bends, swan-necks, junctions, shoes, hanger supports, adapters, brackets, of approved quality including filling the joints with synthetic adhesive in addition to rubber gasket, cement sand mortar 1:2, curing, finishing including hydro testing etc. complete. a) 100 mm Dia , P/F PVC heavy duty rain water pipes Line 320 Service line - 3013549 CONST OF PAVEMENT QUALITY CONCRETE(PQC) Supplying, laying and compacting Pavement quality concrete (PQC) of M40 grade as defined by relevant IS codes with AMNS supplied slag aggregates in cement concrete roads and pavements at all heights and depths above and below finished ground level to required levels, slopes, etc including curing but excluding the cost of providing reinforcement and shuttering, all as per drawings, specifications and directions of the Employer in charge, all materials, tools, plant and labour complete in all respect line 330 Service No - 3013548 CONST OF DRY LEAN CONCRETE(DLC) 100 mm thick DLC including compaction - Supplying, laying and compacting Dry Lean Concrete(DLC) of M15 Grade as defined by relevant IS codes with AMNS supplied slag aggregates in cement concrete roads and pavements at all heights and depths above and below finished ground level to required levels, slopes, etc including curing but excluding the cost of providing reinforcement and shuttering, all as per drawings, specifications and directions of the Employer in charge, all materials, tools, plant and labour complete in all respect Line 340 Service No - 3012156 SLAG FILLING <(>&<)> SPREADING Mixing,Filling <(>&<)> Compacting GSB in plinth - Sub base as per required thickness as per Drawing - 500 mm thick EAF slag filling in 2 layers of 250 mm with grading <(>&<)> compaction ( Layer 1 - 250 mm <(>&<)> Layer 2 - 250 mm ) (rolling, <(>&<)> watering) - minimum CBR value 25%/95%. Line 350 Service No - 3013856 SLAG FILLING <(>&<)> LEVELING INCL. COMPACTION Mixing, Filling <(>&<)> Compacting GSB in Plinth - base as per required thickness as per Drawing -150/200 mm thick slag filling in 1 layer of 150 mm with grading <(>&<)> compaction (Rolling <(>&<)> watering) - minimum CBR value 95%. ( 0 - 40 mm GSB supply By PSP ) Line 360 Service No - 3000255 PROV.AND GROUTING GP2(FOSROC)AS PER SPE. Providing and grouting under base plate <(>&<)> in pockets with ready mixed non shrink grouting mortar (including necessary shuttering wherever required) Note:-Work shall be done as per manufacturers method statement. Page 6 of 6 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000108429 Date 15.03.2024 Submission Date 25.03.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Dhwanil Dave Contact Email DHWANIL.DAVE@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details
