Tamilnadu Co-op Milk Producers Federation Limited has published Tender For Kdcmpu Ltd., - Fabrication, Supply And Installation Of Kiosk A Type Parlour Structure 15 X 15 At Krishnagiri Government Medical College Campus, Krishnagiri. Submission Date for this Tender is 01-04-2024. Fabrication Work Tenders in krishnagiri Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work narrow excavation for foundation in all soils and sub-soils and to full depth as may be directed except hard rock requiring blasting inclusive of shoring, shuttering and baling out water wherever necessary, refilling the sides of foundation with excavated earth in layers of not more than 15 cm thick, watered, well rammed, consolidated and depositing the surplus earth on bank with initial lead of 10 m & initial lift of 2 m, clearing and leveling the site etc., complete as directed by the Federation officers and as per standard specification. |
| 2 | Supplying and filling Stone dust in basement and foundation laid in layers,watering and consolidation etc complete as per standard specification. |
| 3 | Plain Cement Concrete 1:5:10 [one part cement, five parts sand and ten parts aggregate]using 40 mm size hard granite broken stones for foundation including de-watering if found necessary and laid in layers of not more than 15 cm thick for flooring including rendering the top surface rough to take floor finish etc., and including side shuttering if required and compaction, curing etc., complete asdirected by the Federation officers and as per standard specification. |
| 4 | Brick work in cement mortar 1:5 (one part cement and five parts sand) using second class ground moulded chamber burnt bricks of size 9" x 4½" x 3" to line, level and to plumb on one face including necessary scaffolding, racking out joints, curing etc., complete as directed by the Federation officers and as per standard specification. |
| 5 | Plastering with cement mortar 1:5 [One part cement and five parts sand] 12 mm thick including scaffolding, neatly finishing and curing etc., complete as directed by the Federation officers and as per standard specifications. |
| 6 | Flooring with scratch proof premium grade double charged VITRIFIED TILES of approved quality and colour of Size 0.60 x 0.60 x 0.008 m in all floors over 20mm thick cement mortor 1:3 (one cement and three sand) base above the existing bed concrete and pointing with the same colour cement added with colouring pigments etc., complete complying and as per standard specification |
| 7 | Supplying and laying path way tiles 30x30x10mm thick of approved colour and quality and color set in C.M 1:3 20mm thick including the cost and conveyance of all to site and all labour charges etc complete and as per standard specifications. |
| 8 | Supply and fabrication of MS structurewith 2.6 mm wall thick MS square tube(50x50 mm) frame work with suitable MS support(50x25 mm) & (25x25 mm) including the costof all to site and all labour chargesand as per standard specifications and as per design etc complete. |
| 9 | Supply and fixing 18 gauge MS sheet panels1.25 mm thick for structural Parlour including the cost of materials , painting chargesand conveyance of all to site and all labour chargesand as per standard specifications and as per design etc complete. |
| 10 | Providing MS powder coated 0.47mm thick sheet roofing / side walling with zinc coating 120 grams per sqm as per IS 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and coat 15-18 microns. Sheet should have protective gourd film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length . The sheet shall be fixed using self drilling / self tapping screws of suitable sizecomplete ups to and pitch in horizontal / vertical or curved surfaces, excluding the cost of purloins, rafters and trusses and including cutting to size and shape wherever required. |
| 11 | Supply and fixing Steel Rolling Shutter [pull and push type with ISI monogram] of approved quality with MS laths 75 mm wide and 18 gauge thick to different sizes including all accessories like sliding grooves, shafts, springs, bearings, hood & locking arrangements and grouting the sides & top assembly with walls & beams, paintingone coat of red oxide primer etc., complete as directed by the Federation officers and as per standard specification - Gear Operated |
| 12 | Painting new iron work for window shutters, ventilators, iron grills, weld mesh screen with two coats of approved quality and colour of ready mixed synthetic enamel paintand scraping the surface with emery paper, in all floors etc., complete as directed by the Federation officers and as per standard specification |
| 13 | Supplying and installing PVCfalse ceiling usingPVCtype membrane of size 225 mm x 3000mm plain / printed pvc profile with necessary provision of inter locking of T section suitable flange on one side to connectthe other profile. The main runners are suspended from the ceiling but means of 4 mm dia GI rods fixed to the ceiling using anchor fasteners of 50 x 8 mm size with nylon inset and hooked to the main rubbers using clips. The last hangers at end of each profile shall be place at the side wall using edger profile L angle of size 20mx20m and fixed to the same level and should present a neat look. |
| 14 | Supply and fixing 4mm thick Alco panels of approved quality and color with necessery aluminium frames for Parlour including the cost and conveyance of all to site and all labour chargesand as per standard specifications and as per design etc complete. |
| 15 | Painting two coats withEmulsion paint of approved quality and colour over white cement priming coat for new plastered wall surfaces, cost including curing and also make good of the surfaces with sand paper, putty, scaffolding etc., complete as directed by the Federation officers and as per standard specification. |
| 16 | Supply & fixing in position Glass panel made with 12 mm thick toughened glass with required beedings, furniture fittings, floor spring as per the instruction of officers including cost of furniture fittings, fixing the furniture fittings and the shutters fixed in position etc., complete as directed by the Federation officers and as per standard specification. |
| 17 | Supply and fixing in position oftoughened glass (patch fitting) door made with 12mm tk glass with required beedings and lock andkey arrangements, furniture fittings etc complete as directed by the federation officers. |
| 18 | Fabrication and positioning of Rectangular Glass display counter of single shelf 5"X1"size, 3ft ht made out of 8mm Glass on visible sides etc complete as directed by Engineer incharge. |
| 19 | Supply & providingsign board , including providing LED typelamps, power transformer wiring. The name AAVIN withlogolaser cutted with providing 2 mm thick acrylic sheet pasted on the tip of ACP frame work suitableheight and the size as perdesign, including arranging the required scaffolding to work on the height & as per regular engineering practice as required. ( Front & Rear side top) |
| 20 | Supply and providing vinyl stickers fixed to 3 mm thick PU foam to support with "AAVIN" products & logo printed on digitally with lamination to cover and to be pasted on the external wall of parlour, including fixing with suitable polymer based adhesive as advertisement of AAVIN parlour. The cost includes preparing the required advertisement of design on "Coral Draw" software. |
| 21 | GST (Note: The tenderer should quote the amount towards Goods and Service tax (GST) in the appropriate columns in terms of percentage (%). If not quoted, it will be considered that the rate quoted is inclusive of GST.) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
